Inactive space in the window of brush presets

Similar Questions

• HP Split x 2: not enough space for the Windows 10 update

  I have a Split of HP x 2 (64 GB SSD, drive hard 500 GB) running Windows 10.  I recently received notification of an update of Windows 10 version 1511, 10586.  Trying to install the update, I get an error message saying that Windows needs more space on C:, specifically 8.13 additional GB.

  Settings Windows reports 58.9 gb of 59.2 GB already used on C: which is 47.2 GB ' system and reserved.

  The update program says that I can use another drive for the update and I tried the built in D: (more than 200 GB free) and an external drive (900 GB free), but the update will fail with the same message outside a slight reduction in the amount required on C: (7.17 GB) of free space.

  I had already cleaned useless all the files using the Windows disk clean and have less than 6 GB in applications and data, in order to get rid of everything that would still runs.

  All GB 47.2 OS is really necessary?  Any large pieces I can get rid of, or is the only way an SSD upgrade?

  PeSke

  Only in the last day or two, MS has eliminated a new update of Win10 who, claim, addresses the problems of people said that they do not have enough disk space for the Nov 10 update and when they provide you with an external hard drive, it will not use it.

  I suggest that you are looking for updates and see if it is applied and then retry the update 10 Nov.

  Good luck

• Bootcamp lost after the new partition (try to increase disk space for the window)

  I have Version OS X El Capitan 10.11.2. Here are the details on my system.

  

  So I tried to increase the space in the partition for the training camp by using disk utility. I created the new partition. But now I can't bootcamp while I restart the computer and hold down the option key. I tried this in the terminal:

  sudo fdisk e/dev/disk0

  p

  setpid 4

  07

  Pavilion 4

  p

  writing or w (tried both)

  There

  But it does not seem to pick up my bootcamp windows. I also tried to restore the mac as early date of backup via external hard drive, but that doesn't seem to help either.

  Here is the screenshot of the output. Any help would be appreciated. Thank you.

  

  Can you post the output of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Free disk space in the Windows Explorer status bar.

  In Windows 7, I wonder how to display disk space is free in the Windows Explorer. In XP, you could see how much space was free down in the status bar. He would say how objects and disk space that was free. How can I activate this in Windows 7?

  Return to the root that particular drive is annoying, when I should be able to see how much free space I have for any folder.

  Thank you.

  These 2 features have been removed from the latest version of windows and really help to speed up the use of every day:

  Display the amount of free space
  Display of the total size of the files in folders.

  How this two features can be added to the status bar?

• StackPane not to fill the available space in the window

  Hi all!
  
  I am facing a problem when you try to resize (even just filling) additional space on a window with a 'structured' node
  
  Explain:
  
  I use this framework to manage several scenes: https://blogs.oracle.com/acaicedo/entry/managing_multiple_screens_in_javafx1
  It works fine, but I am not able of to the 'internal' node expand to fill the entire window. I am able to set min width and height to reach the limits of the window, but I would like to set to the mode "full screen" to the node and let the JavaFX do the trick. Is this possible?
  
  I have attached an image to help the explanation. Basically what I want, it's fill the green zone (controlled Screene that extends StackPane) with blue/pink (Gridpane with bottomAnchor = "0.0" AnchorPane.leftAnchor = "0.0" AnchorPane.rightAnchor ="0.0"AnchorPane.topAnchor = "0.0") node.
  I already tried to extend the framework to the node Anchorpane class but did not work.
  
  Please follow this link to the image:
  https://DL.dropboxusercontent.com/u/25373134/screen.PNG
  
  TKS in advance!
  André Castro

  Looking at the blog you linked, there is the following code:

  Group root = new Group();
  root.getChildren().addAll(mainContainer);
  Scene scene = new Scene(root); 
  

  It's probably the cause of your problem.
  A group is not a resizable pane, so it does not develop to adapt to its surroundings.
  Trying to root a StackPane instead and see if that works.

  StackPane root = new StackPane();
  root.getChildren().addAll(mainContainer);
  Scene scene = new Scene(root); 
  

  If this does not solve your problem, please post the full content of the file FXML you use and use a harness to test you app to display.

• Low disk space on the Windows XP computer.

  Original title: clean C disk, compress files.

  I'm low disk space and need to Defrag. When I clean disc - the same 2-,-is still there. No matter what I do, I always only 7.1% of free space on my C drive. How can I get more space?

  Hello

  What is you receive the exact error message?

  You can follow this link & check if the problem persists:

  How to recover space on Windows Server 2008 and Windows XP computers?

  
  Reference: forty ways to free disk space

  Hope the helps of information.

• virus from consumption of space in the "WINDOWS" folder

  Hey guys please help me... My local disk c is to have space 0. Its because of a folder named windows... When I click with the button straight on the record & clicked on properties he showed 18 released GB 19 GB... Then I clicked on windows, I selected all files & den clicked on properties he showed only 4 GB is taken... I think there is a virus in the file my antivirus avira name can't detect is... i also used combofix & I got the JOURNAL. TXT file... Please help me... & I get a coz of recovery console windows system that my portable dvd player no longer works...

  Google Chrome can create large files as it indexes your research. It could be that the program is not suitable for use on your computer.

  http://www.google.co.uk/search?q=Google+Chrome+Indexing&hl=en&num=10&lr=&ft=i&cr=&safe=images&tbs=qdr%3Ay,qdr:y#pq=+chrome+indexing&hl=en&cp=27&gs_id=1a&xhr=t&q=+Chrome+Indexing+Disk+Space&pf=p&sclient=psy&lr=&tbs=qdr:y&source=hp&pbx=1&oq=+Chrome+Indexing+Disk+Space&aq=f&aqi=&aql=&gs_sm=&gs_upl=&bav=on.2,or.r_gc.r_pw.&fp=a19bed4caca36660&biw=893&bih=492

• White space in the Windows 7 Task Scheduler

  I noticed a whitespace in Task Scheduler when it will be launched with the mode full screen

  

  However, when it is "expanded" to a tiny screen (restore down), white space is not present

  Edit: Looks like the 'problem' is present with large screens.  I tried connecting my laptop to my monitor and then start the Task Manager. The same result is displayed.

  I was able to reproduce white space as you have indicated.

  I have never seen since I rarely close a window full-screen.

  I don't know what is the cause.

• Set the preset shape error - "unable to complete the command set brush Preset because the selected area is empty.

  I tried many ways to create a custom PS CC brush (2015), and all my efforts give the same error identified in the subject. I copied the shape layer in PS CC (2014) and everything worked fine. As a solution, I saved the brush set out and transferred to 15. I can't understand what is wrong. Is there a bug in 15 w 'set preset shape' specifically? Greatly appreciate suggestions and knowledge. Thank you!

  See you soon,.

  -DK

  Which will not. There's nothing a brush without bristles of brush 100% white. There is nothing to set.

  

• Cannot connect two work spaces in the same browser window

  Hello
  Happy holidays to all. I have problem to identify two workspaces (associated with two diagrams) in a browser with two tabs in the browser. The situation as the following:
  
  -Using Internet Explorer 7.0 or Firefox
  -Login in A work space, associated with the AA scheme. (connect successfully)
  -Then, click New tab in the same browser window, log in the workspace B, associated with the schema BB. (connect successfully)
  - The tab of connection of space one was closed (kicks) automatically.
  
  If I open two separate browsers, I can connect a work space in the window of a browser and connect another workspace in a separate window, not tab.
  
  Why? Is somewhere, I missed setting or configuration for APEX? All advice is greatly appreciated.
  
  Candice

  You're right, you can't do that.

  Try using Firefox chrome and one for the other.

  Tyler Muth
  http://tylermuth.WordPress.com
  [Oracle security application: development of secure database and Middleware environments | http://sn.im/aos.book]

• Cannot use the Windows Partition

  So, I have seen very similar messages and followed several forums, but I can't yet figure out what to do next.

  I have 8.1 Windows on my Mac.  I wanted to repartition the Windows partition and make bigger it because I was running low on space, and the Windows partition is what I use it mostly for graduate studies.  About a year ago, I took an easy youtube video and used Mini Wizard Partition re-partition space and it worked perfectly.  I have found the same video and tried to repartition the Windows partition again, but apparently I royally screwed up.

  My BootCamp is not yet visible more in disk utility.  Under the partitions, there is an option called "disk0s4" greyed, but I'm not allowed to do something with it.  I can't verify or repair.  If I go to Applications, BootCamp Assistant is there, but he wants me to start the installation of BootCamp.  It was not an option to restart Windows more, and when I turned on with alt + market, Windows was not an option more.

  I followed this tutorial:

  http://nerdr.com/bootcamp-partition-lost-repairing-Mac-partitions/

  and when I restarted my Mac, restart Windows was an option. So I thought that I fixed it! EVIL.  My screen was black and said: 'Missing Operating System '.

  I downloaded EaseUS Data Recovery Wizard for Mac (because it was another suggestion), and I was able to recover and see the files on the NTFS disk0s4, so I'm quite positive, they have not all been completely erased.  Or at least the part of basic Windows is still there.  I can't recover the drive to anything, because it tells me that I will just be fitness on the same drive, and I honestly don't know how to retrieve these files will help with the side of the partition of things.

  I also used TestDisk and it seemed to find my missing partition, but in the middle of analysing it, it says something like "disk too small."  After further research, I went through and took only the most recent score that seemed to be deleted with NTFS, and when you are trying to do, it would allow me to make a 'logic' partition because he said something in red, as 'bad file.'

  My Mac still works perfectly, but I'm terribly need to recover my windows.

  Here are my findings from a similar position:

  Last login: Wed Mar 9 16:30:28 on ttys001

  Anna-Owenss-MacBook-Pro: ~ acowens1$ sudo gdisk/dev/rdisk0; "exit";

  GPT fdisk (gdisk) version 1.0.1

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Scanning partition table:

  MBR: hybrid

  BSD: absent

  APM: absent

  TPG: present

  Found a valid GPT with hybrid MBR; using GPT.

  Command (? for help): p

  Disk/dev/rdisk0: 625142448 sectors, GiB 298,1

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: 0000429B-368F-0000-CB2D-000003440000

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 625142414

  The partitions will be aligned with the boundaries of sector 8

  Space free total is 277435021 areas (132,3 GiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 MiB EF00 EFI system partition

  2 409640 268314855 127.7 giB customer AF00

  3 268314856 269584391 619.9 MiB AB00 Recovery HD

  4 547018752 625141759 37.3 giB 0700 BOOTCAMP

  Command (? for help): r

  Recovery/processing command (? for help): o

  Size of the disk is 625142448 areas (298,1 GiB)

  MBR disk identifier: 0x0000711C

  MBR partitions:

  Code of State sector Boot start end sector number

  1 1 547018751 primary 0xEE

  2 * 547018752 625141759 0 x 07 elementary school

  Recovery/processing command (? for help): h

  CAVEAT! Hybrid MBRs are flaky and dangerous! If you decide to not use one,

  Simply press enter at the prompt below and your partition table MBR will be

  be intact.

  Type one to three GPT partition numbers, separated by spaces, to be

  added to the hybrid MBR, in order: 2 3 4

  Partition of EFI GPT (0xEE) place first in the MBR (good for GRUB)? (Y/N): y

  Create entry for the #2 GPT partition (partition MBR #2)

  Enter a hex code MBR (default AF): n

  Set the bootable flag? (Y/N): n

  Create entry for the #3 GPT partition (partition MBR #3)

  Enter a hex code MBR (default AB):

  Set the bootable flag? (Y/N): n

  Create entry for the #4 GPT partition (partition MBR #4)

  Enter a hex code MBR (default 07):

  Set the bootable flag? (Y/N): y

  Recovery/processing command (? for help): o

  Size of the disk is 625142448 areas (298,1 GiB)

  MBR disk identifier: 0x0000711C

  MBR partitions:

  Code of State sector Boot start end sector number

  1 1 409639 primary 0xEE

  2 409640 268314855 primary 0 x 01

  3 268314856 269584391 primary 0xAB

  4 * 547018752 625141759 0 x 07 elementary school

  Recovery/processing command (? for help):

  Now, my major dilemma is that in the original post, he said to the partition of the hybrids with the numbers of 3-4-5, but I was unable to do so.  When I tried 5, he said "partition does exist or is too large."  So I used the 2 3 4 numbers.  Now, I'm at the point where I use the w command (to write), but I don't want to do it if I didn't the other steps correctly.

  1 mini Partition tool is very dangerous and should never be used on a Mac, in particular, more than once.

  2. article NERDR is the most irresponsible article about these issues and causes and exacerbates still more data loss.

  3. Please do not rewrite the MBR/GPT with Gdisk.

  4. you must return to Testdisk. TestDisk is used only for scanning, not for the updates. All updates using Gdisk, not binding Testdisk, once the right partition headers have been found.

  5 Please after the release of

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

• "Running out of disk space" message on Windows XP.

  The original title: disk space

  I run Windows XP on a Dell system.  I get a pop up telling me that I am running on the disk space, I never used get this, also my Defragmenter doesn't work anymore. It is revealing that my system is not recognized.  He told me to run chkdsk/f. thank you

  Hi AngelitaPagan,

  Thanks for posting your query in the Microsoft Community Forums!

  It appears from the description of the problem, you get the error of not enough space on the Windows XP computer.

  We're here to help and guide you in the right direction.

  Help me with little information.

  1. don't you make changes on the computer before this problem?

  2. What is the exact full error message?

  To avoid this inconvenience in the future, I suggest you to return these items to help and check if it helps.

   

  How to recover disk space on a Windows Server 2003 or Windows XP computer

  http://support.Microsoft.com/kb/956324

   

  Description of in Windows XP low disk space Notification

  http://support.Microsoft.com/kb/285107

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Windows XP doesn't recognize all available disk space

  http://support.Microsoft.com/kb/316505

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• How to change the background color of the window?

  I would like to change the background color for all applications to pale gray,

  such as Notepad and IE.

  Anyone have any suggestions on how to do it?
  Thanks in advance for your suggestions

  Right-click on a zone empty of your desktop and choose personalize. When customization of the control panel applet opens, choose the color of the window (on the axis, below the pane). When the pane of the window color and appearance opens, click Advanced appearance settings (lower left corner of the pane).

  Now... with the Windows color and appearance of dialog box open, click on the white space of the Window Active (do not click the text in the window) or choose the command window of the point: in the drop-down list. Choose a color for 1 color:, e.g. Gray. Click apply at the bottom right and wait Windows 7 resets the graphic properties.

  If you now open Notepad, you'll have a gray window active. My IE follows suit, but only on a white page. Web designers in general choose the background image or color they want to view, and you will have to go into the options of the browser to replace those.

• Not enough space on the data store

  I created a VM w2k8 server. I have attached a second virtual drive to it in the vsphere client determined I gave him too much space. I went back in the vshere client and click on delete. Now, when I go to add a second drive with the right amount of space I want t use I get error not enough space on the data store. I noticed that the old file vdmk still exist but do not know how to proceed. It is a 5 ESX environment and the data store is on the SAN. Space on the windows server is listed as unallocated.

  Hello and welcome to the community of VMware. Well I would like to browse the data store and make sure that there are no vmdk files sitting here that, if the other wise not to be there. Have a go at this and feedback your conclusions.

  Best wishes.

• How do I add the rotation tool in the Brush preset picker?

  Hello, I have tried to find a solution to this problem for a while now and can't find anything, I want to add the rotation wheel/tool to my brush preset picker, I have seen several videos that people have this wheel in it, I believe I had it, but he went.

  I'll add some photos of how is my brush preset picker and how I want it to be

  How it is:

  https://gyazo.com/afc953ac48d55720d77d06adf38c061a

  How I want it to be:

  https://gyazo.com/2dc3721626c0c39535a8cda5c8a68f9f

  I would really appreciate help with this!

  Thank you!

  Fernando

  My mistake. I don't see in my Windows CS6 either. It is not a feature of this version. I was watching CC 2015.