Inappropriate driver found for SqlServer Using DBAT connector

Similar Questions

• No driver found for the new USB drives don't. No problem with the devices previously used.

  Hi, I can not install any "new" USB keys or USB external drives. The error is "driver not found".

  The thumb drives and external drives that I've used are working properly. The error is for the devices was not used in this machine.

  I tried to follow a tip on a site and deleted INFCACHE.1 (after creating a restore point), but it has not changed the behavior.

  Windows 7 32 bit.

  Kind regards

  Check if you have limited the available somehow drives... possibly VMWare has reserved
  the drive letters. Best is to check with the VMWare Support and forums.

  Look in Windows disk management and see if something is there.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• No driver found for network controller for - Pavilion dv6 - 6188ca

  I had to reinstall windows 7 pro OS as my laptop I was not able to start.  I did not use recovery CD.  I used windows 7 pro install CD and with a product key valid, now everything works except for LAN wireless.

  In Device Manager, I have a yellow mark for network controller and says driver not found. I tried all the drivers listed for this model on the HP support site, but without a bit of luck. (there are 8 network driver listed for this model on the HP support site)  There is also no specific driver that is listed as "Network controller" from the HP site.  My laptop uses the 4313 Broadcom 802.11b/g/n Wi - Fi and Blutooth 2070 (handset) 2.1 adapter. Bluetooth works very well because he is able to see other Bluetooth devices nearby.

  How can I solve this problem? Where can I find the driver for the network for this camera controller? Any help would be much appreciated. I havn't tried to connect via LAN and let windows search for a suitable driver for this laptop.

  Hello:

  This wireless Broadcom driver should work for you...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

• No driver found for printer epson stylus office b1100

  try to install on my laptop an epson stylus office B1100 printer.message appeared saying no driver found.

  Windows 7 drivers:

  http://www.Epson.co.UK/GB/en/viewcon/corporatesite/products/mainunits/support/3612

• No 64-bit Windows 7 driver found for printer HP PSC 2175xi

  I have a new computer laptop 64 bit Windows 7 and I want to connect my HP PSC2175xi all-in-one printer him via the USB port.  The automatic detection and installation can't find a print driver for it.  Please, where can I get the 64-bit of Windows 7 for the printer, or at least a similar driver so that I can print?

  Try the following: go to start, devices and printers, adding a printer, choose some dummy port as LPt1 and select Windows Update.  It will take several minutes for the updated list, once the series HP PSC 2170 should appear under the manufacturer "HP" printers (not Hewlett-Packard).  At this point, cancel the installation and plug the USB cable and the drivers should be installed automatically as described here.

  If the above does not work for some reason that you can manually download the drivers from the catalog of Microsoft Update Site.  Use IE, no other browsers are supported.  Put "HP psc 2170" in the search box, the drivers, you will need are a 11.6 Mb in size and the 2.2 MB.

• HP 14-r208nv: no driver found for x 84 OS win7 (hp 14-r208nv wifi problems) and BRIGHTNESS

  
  

  You are the very welcome.

  Here are links to the W7 32-bit wireless and bluetooth drivers you need:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_149229_1&swEnvOid=4053

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_147638_1&swEnvOid=4053#tab1

• SQLException: No suitable driver found

  Hello
  
  Can you help me with this: I'm trying to get JDBC to work with this simple code snippet:
  

  package databasetest;
  
  import java.sql.Connection;
  import java.sql.DriverManager;
  import java.sql.SQLException;
  //import com.mysql.jdbc.Driver; //does not find the class(?)
  import java.sql.Driver;
  
  public class Main {
  
      public static void main(String[] args) {
  
          Connection conn = null;
          try {
              //DriverManager.registerDriver(new Driver() {});
              //System.setProperty("jdbc.drivers", "com.mysql.jdbc.Driver");
              conn = DriverManager.getConnection("jdbc:mysql://localhost/test?user=someuser&password=somepassword");
  
          } catch (SQLException ex) {
              // handle any errors
              System.out.println("SQLException: " + ex.getMessage());
              System.out.println("SQLState: " + ex.getSQLState());
              System.out.println("VendorError: " + ex.getErrorCode());
          }
      }
  }

  I get this result:
  

  SQLException: No suitable driver found for jdbc:mysql://localhost/test?user=someuser&password=somepassword
  SQLState: 08001
  VendorError: 0

  I don't know what to do next. I set the CLASSPATH environment variable in the/etc/profile file (it's a Mac) for:

  export CLASSPATH=$CLASSPATH://Applications/mysql-connector-j/mysql-connector-java-5.1.15-bin.jar 

  How do I install the driver correctly or what should I do basically to operate?
  
  Thank you
  
  PR.

  [Url http://www.developer.com/java/data/article.php/3417381], I found this MySQL/JDBC tutorial to be a very good read.

• AD60D7P4 IDE Controller no driver loaded for this device

  I recently had some performance issues with computer ym so I went into Device Manager to update the drivers and such and this AD60D7P4 IDE controller has a yellow exclamation mark next to it. So I clik to update the driver I did this multiple times yet no driver found for him. Also, I downloaded several programs for the update of autopilot just to make me pay for them after pretending to be free. Can someone please help me with this, I think that maybe that's the problem Im having but I cannot fix.

  Hi JHarrison,

  What is your computer brand and model?

  I suggest updating the drivers from the chipset of your PC by downloading the latest version from the manufacturers Web site.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No suitable driver not found for... Exception

  I'm new here... I get no suitable driver... find exception while trying to connect to oracle DB. Please help
  
  java.sql.SQLException: no suitable driver not found for
  at java.sql.DriverManager.getConnection (unknown Source)
  at java.sql.DriverManager.getConnection (unknown Source)
  at AddUser.doPost (AddUser.java:46)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
  at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
  at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
  at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)
  at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
  at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
  at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:861)
  at org.apache.coyote.http11.Http11Protocol$ Http11ConnectionHandler.process (Http11Protocol.java:606)
  to org.apache.tomcat.util.net.JIoEndpoint$ Worker.run (JIoEndpoint.java:489)
  at java.lang.Thread.run (unknown Source)

  user707 wrote:
  to avoid this error

  java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver

  I use classes12.jar I checked nowly... not for the poster mentioned error. It showing my wickedness. :(

  Well now start using ojdbc6 which is a real driver.

• Interface not found error when using Snap example for Firewire (IEEE 1394)

  Recently, I installed a SONY XCD-SX910 in interface with Labview 8.2.  When you choose the driver, only the Legacy driver would work for the installation of Firewire (R) (or IEEE 1394).  After installing the driver, I have images of the inteface to MAX.  However, when you attempt to trace through the example of Snap 1394 legacy since the document installation IEEE 1394, I get the error "Interface not found".  I tried a few iterations to try to name the camera as "cam0' (the name given to the camera to the MAX) and" cam0: SONY XCD-SX910.  However, the error continues.

  What should I name my camera so he could find the interface?  Will there be another underlying problem that is not obvious?

  Control of IO is not something that will be filled when you use the Legacy 1394 driver. If you use IMAQdx as your driver, it will fill. Thus, when you use the Legacy 1394 driver, you have control of the chain on your façade. When you use control of the chain, you must set the name of the camera as "cam0" as you did before. As long as this corresponds to what is able & Automation Explorer, you should be good as long as MAX uses the same driver that you are trying to use.

• How to remove the selected driver windows for your Android phone if you want to use a different driver such as pdanet?

  I am trying to download PDAnet found at http://junefabrics.com/android on my desk so that I can use my T - mobile Mytouch 4 G phone as a modem for internet.  During this process, Setup of hardware for windows installed a pilot Android usb which is not compatible with pdanet.  I was not able to remove this driver or make compadible with the driver that I would use.  I went into Device Manager and tried to uninstall the generic usb driver, but this does not seem to actually remove it. I also tried to update the driver, and it does not work either.  I rebooted the computer several times and run updates of Windows (just the ones he can do without internet).

  On my desktop computer's operating system is Microsoft Windows XP Professional, version 5.1.26. I did not send this email from the computer with the problem because, well, I HAVE no INTERNET on this computer.  Help, please!

  Hi Virginia,

  The pilot , you need to download. Once install you on the machine it will then detect the Mytouch 4 G phone.

  Also you can see the T-Mobile Forums of below with all the problems associated with Pdanet.

  http://forums.t-mobile.com/T5/myTouch-4G/PdaNet/TD-p/560883

• Windows found driver software for your device but encountered an error trying to install it.

  Original title: USB AUDIO Device

  Hi, I tried to install a USB AUDIO device, but I discovered that there is no audio output. And while I try to update the driver, I found an error "Windows found a driver software for your device but encountered an error while trying to install it., USB, the system AUDIO DEVICE cannot find the specified file. I m using Windows 7 64 bit computer laptop, is there a way to fix this? real emergency...

  Hi monopolystar,

  Try to download the Audio driver manually from the following Web site and the Coachman:
  http://support.Acer.com/product/default.aspx?modelId=2057
   
  If you want to update BIOS drivers I suggest you to contact Acer for further assistance
  http://secure3.TX.Acer.com/findsystem/FindSystem.aspx?title=contact+support&brand=Acer
   
  Hope this information helps.

• How can I print my lists of distribution for later use if the drive breaks down?

  Had a problem with the hard drive on the new computer. Company reloaded hard drive. Lost all email addresses. Had to manually type in THE addresses again. Is there a way I can save my addresses to disk or print it out on paper for later use if I lose them again?

  Open the address book window.
  Select tools-export
  Select the type of file.
  The name of the file.
  Choose where to save it.

• I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  Can she be seen by disk utility (and which version of Mac OS X is)

• not able to install the driver mx NIDAQ (for the use of USB-6008) in my laptop, NIDAQ902f0? any solution...

  I am not able to install driver of mx NIDAQ (for the use of USB-6008) in my laptop,... well NIDAQ902f0 want to give any suggestion...

  Following message comes when I run the Setup... (installation program downloaded from the website OR..)

  Runtime error:

  This application has requested to terminate in an unusual way.

  Please contact the application support is more information.

  Title of the dialog box is "Microsoft Visual C++ runtime library"

  Is the same when NIDAQmx 7.5 is tried to install from the CD that came with the USB-6008.

  Double post