Include styles double line in libraries?

Similar Questions

• How to draw and edit double lines with Adobe Illustrator?

  I need tot draw road maps. This should be easy with the pen tool, but my problem is that I can't find a way to draw a double line with this tool. I've seen a lot of models and fancy border styles. Some do not have the lines double or even quadruple, but the problem is that they have an offset from the vector line and the space between the two lines (the edges of the road) cannot be filled. Somewere I also found a few pens called "Double line 1.1' to ' Double line 1.6' but they also had an offset from the vector and I could chance not regardless of the size of the lines and the interval between them."

  I'm looking for is a way to draw two lines in parallel and have tot option fill out the space between the two with a color or even a model.

  The color and the size of the lines should be variable to distinguish between several types of road.

  Y at - it a game's existing pencils for this? It would be nice to be able to attract not only the roads, but also railways and rivers!

  I'm certainly not the first person who needs to do that?

  I use HAVE version 6

  Here is a picture. You can adjust the color of each stroke by selecting the line in the appearance Panel, and then change the color in the little box. Your best bet is to save the appearance as a graphic Style, so you can apply it to any line in the future. Not necessary for a brush and easier to change.

  

• How can I disable the function where my mouse over the double line that then creates a pop-up window?

  When I hover over a word or an expression that has a double line below, a suggestion box comes with a link that takes me to a site that is in regards to the word or phrase that I flew over.

  Hello kayjay76, this looks like a problem caused by some sort of adware on your pc. Please go to firefox > addons > extensions and remove any suspicious entries (toolbars, the things that you have not installed intentionally, I don't know what purpose they serve, etc.). also, go to the windows control panel / programs and remove all toolbars or potentially unwanted software from there and run a full scan of your system with the security software you have in place and various other tools such as the free version of malwarebytes & adwcleaner.

  Remove a toolbar that has supported your Firefox or the homepage search
  Fix Firefox problems caused by malicious software

• Aeromy computer has keywords with a double line under them, how can I get rid of them

  my computer has keywords with a double line under them, how can I get rid of them

  Hi Pete McDowell,.

  Glad to know that the problem is solved. Let us know if face you any problems with Windows in the future.

• How to include descriptions of line in the newspapers?

  Hello
  
  trying to export logs to HFM with Excel models. HFM/FDM version used is 11.1.1.3.
  
  I wonder if it is possible to include descriptions of line in HFM-journals when they are displayed through FDM?
  
  When the journal template is defined, account dimension is named 'A' and ICP with 'I', etc. According to Manual of FDM, description is called "D", but this tag transfers the content of the column to the General description in the journal HFM and line descriptions are left empty. What would be the appropriate label in the sheet model referring to the description of line?
  
  
  BR,
  Juha

  Sorry I misread your previous post. The description of line is currently an enhancement request. You can change the action of the adapter that generates the log but that would make your unsupported adapter. It's fine as long that you break it up but any customizations make you will not supoprted and would be lost when you upgrade the adapter.

• Double line

  Hi all
  
  I'm using fireworks 8. I would like to explain a rectangle with double contour or double line. I can't find this type of stroke under 'stroke options' on the property Panel. Any help in this matter is much appreciated.
  
  

  thozhayan;
  Edit/change extension/path Strokes? -Tom Unger

• How to make the double line things go away when I read web pages, that what happens in front of him just some words that are double line under the word and then you will see an announcement when the cursor passes through the word.

  He double blue line under a word like POWER or Medicare, etc.

  It is contextual advertising. You should be able to eliminate one of the following. I suggest you have a file hosts and Adblock Plus with EasyList filter subscription.

  Extension "Adblock more."

  You also need the filters as "Easylist" subscription so after installation of

  with the right button on the icon of the status bar and choose 'Préférences'

  then on the filters menu-> Add-> EasyList subscription

  https://addons.mozilla.org/firefox/addon/adblock-plus/ (608,3 KB)

  Blocking unwanted Parasites with a Hosts file

  Blocking is at the level of the system

  http://www.MVPs.org/winhelp2002/hosts.htm

  View/use the HOSTS offered above as a plain text file

  http://www.mvps.org/winhelp2002/hosts.txt (596KO)

  If you add one of your own you will have to keep in mind

    and manually include the online hosts.txt file below your own.
  

  Hosts file is more oriented to protect your system against the really bad
  or things spread by its host name. Do not confuse with no antivirus protection more.

  Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

  BLOCKED TOO - with Adblock Plus - no problem:

  With the ease of blocking items in Adblock Plus occasionally, you can be too aggressive and suddenly disappear all over the page. Adblock Plus provides functionality to help you know more precisely what you block with on a page.

  As seen in the Preferences ("Ctrl + Shift + F"), ABP maintains separate groups
  -The filters that you created yourself (rules of Exception, blocking rules, element hiding rules)
  -Separate groups for each subscription filter

  The report of blockable items ("Ctrl + Shift + V"), it's where you go to see what is blockable, what is blocked and if blocked what the rule is on the line with the mouse hovering. It would also enable the source, so you can see if it was your rule. The right mouse button opens a context menu with options. I show the columns are {address, filter, type, State} selected to the right of the headings. I have sort by State so block appear in red at the top.

  You can use the report to make the changes you need.
  We'll see changes you make in the preferences.

• Help with a script that detects the content in a cell and apply the cell style to line

  Hello

  
  

  I am trying to add an article to my table formatting script that is a cell with the word 'Budget' (but this can be written as ' Budget:' or ' Budget: (E) "- but without the speech marks) and apply the cell Style - SponsorCells - to all the cells of the whole line. I currently have on what it will, but it does not work:

  
  

  function checkWhichTable()
  {
  // ensure the user made a selection
  if (app.selection.length != 1)
  return null;
  var currentTable = app.selection[0];
  if (currentTable.hasOwnProperty("baseline"))
  {
  currentTable = app.selection[0].parent;
  }
  while (currentTable instanceof Cell || currentTable instanceof Row || currentTable instanceof Column)
  currentTable = currentTable.parent;
  if (!(currentTable instanceof Table))
  {
  // No table selected
  return null;
  }
  return currentTable;
  }
  app.doScript(checkUserSelection, ScriptLanguage.JAVASCRIPT, undefined, UndoModes.ENTIRE_SCRIPT, "Process Table");
  
  
  function checkUserSelection ()
  {
  var a_table = checkWhichTable();
  if (a_table == null)
  {
  if (confirm("No table selected. Do you want to process *all* tables?") == false)
  return;
  allTables = app.activeDocument.stories.everyItem().tables.everyItem().getElements();
  for (aTable=0; aTable<allTables.length; aTable++)
  {
  processTable (allTables[aTable]);
  }
  } else
  {
  processTable (a_table);
  }
  }
  function processTable(table)
  {
  // do something here!
  
  
  //Set 1st Row Height
  table.rows[0].height = "30mm";
  
  
  //Find Text in Cell and apply Cell Style to Row 
  var  
    myCellText=['Budget', 'Budget:', 'Budget: (E)'];  
   var myRegEx = new RegExp("^("+myCellText.join("|")+")$");
    for (i=0; i<table.cells.length; i++)
    {
      if (table.cells[i].texts[0].contents.match(myRegEx))
        table.cell[i].appliedCellStyle = "SponsorCells";
    }
  
  
  //end - do something here!
  }  
  

  
  

  I can get the script to apply the cell style to "SponsorCells" for each cell that contain the word 'Budget' etc, but I need cell ever on this line to have the cell style applied. I tried to re-write line 56 which applies the style to a cell, but I can't seem to make it work. Any help would be great.

  
  

  Separate on this issue, I would like to have a line of code similar to the 46 line, which sets the 1st height of lines, but I would like to say "If a cell has 'A cell Style' and then applies the value height 10 mm". If someone could result as a help of bonuses, things would be great double.

  
  

  Thanks in advance!
  

  But that could be painfully slow. To speed things up, follow these steps:

  var cells = table.cells.everyItem().getElements();
  for (var i=0; i
  It is faster, because it creates an array of cells with a call to table.cells, which is several times faster than calling table.cells. And before assigning to line 12mm height is useful to check if it is already 12 mm. checking things in InDesign and do things only when it is necessary is much more effective than simply doing things even if they are not necessary.
  		   

• Cells in consecutive sheets may include the following line in a master spreadsheet

  Hello. I have a master sheet of orders for that customer. I want to build another spreadsheet "invoice" for each line of this master worksheet. Is anyway to do (except manually by selecting the required master line as I build each sheet)?

  Thank you

  Without specific details (including screenshots), it will be difficult to answer.  Figures has functions that can get data using various methods.

  Indirect(), offspring, Lookup(), vlookup() and hlookup() are functions that can help you

• Double line objectlistfield

  I have an objectlistfield which shows a bunch of selectable items that can be selected. The problem with this is that each text is very long and needs at least two lines and the objectlistfield seems not to support this feature. It cuts just text.

  I tried increasing the height of each line, but the text does not change its format. I read that possible solutions would be to replace the "drawListRow" of the objectlistfield but I can't figure out how to do it properly.

  I'll appreciate any type of help.

  First, you must set the line height. Usually, I take double the font size and add 2 for good measure.

  Now you can adjust the drawListRow. You get a parameter which determines where you are in your current line. drawText takes x and y as input. You can draw the first line by using drawText(5,y,text) and the second using drawText (5, y + listField.getRowHeight / 2, Text2). You must take care of a linebreak correct etc, I usually do with a StringTokenizer.

• Double line, need to remove?

  Hello to everyone!

  I have a problem, I've created a style, but the text in this style removes a line...

  I add a page to, to make things more clear,

  the first line is a style that I created that deletes a line,

  the second line is another style that does not drop a line, and this is my goal,

  any suggestions?

  

  Thank you!

  Both are defined to align to baselinegrid. In order to work the baselinegrid both need to have the same ad leader. If a style has a leader more than the baselinegrid he will skip a line.

• Paragraph style, first line "BOLD"

  Hi all

  I try to give a column in a table definition in which the first line is "BOLD" and the rest of the cell is not, like this:

  ---------------------------------------------------------------------------------

  2 3 column cell

  Name of the company
  Address

  Address

  2 4 column cell

  Name of the company
  Address

  Address

  ---------------------------------------------------------------------------------

  I don't know if this is even possible, but it would be a great help.

  I apply the paragraph as follows to the second column:

  ---------------------------------------------------------------------------------

  myTable.columns [1].cells.everyItem () .texts [0] .applyParagraphStyle (contentText);

  ---------------------------------------------------------------------------------

  Here's the paragraph contentText:

  ---------------------------------------------------------------------------------

  contentText var = myDocument.paragraphStyles.item ("contentText");

  Try

  {

  var contentTextName = contentText.name;

  }

  catch (MonErreur)

  {

  contentText = myDocument.paragraphStyles.add({name:"contentText"});)

  }

  contentText.appliedFont = "Arial";

  contentText.fontStyle = "Regular";

  contentText.pointSize = 10;

  contentText.spaceAfter = 10;

  contentText.spaceBefore = 10;

  contentText.fillColor = myDocument.colors.item ("Black");

  ---------------------------------------------------------------------------------

  Is there a way to leave only the first line to be bold?

  Thanks in advance,

  Greetings

  Hello

  You can work with a line for your paragraph style style, if your lines of text are not separated by the sign of paragraph as in a good example shown here:

  

  If your text is composed as in the example on the left using signs of paragraph, you need a paragraph style distinct for the first paragraph with Arial Bold.

  As already noted Willi Adelberger.

  Example for adding a nested line style:

  var doc = app.documents[0];
  
  // Your paragraph style name that later should contain a line style:
  var paraStyleName = "contentText";
  // For defining a line style we need a character style:
  var charStyleName = "FirstLineBold";
  // All properties for the paragraph style:
  var paraStyleProperties =
  {
      name : paraStyleName ,
      appliedFont : "Arial" ,
      fontStyle : "Regular",
      pointSize : "10 pt",
      spaceAfter : "10 pt",
      spaceBefore : "10 pt",
      fillColor : "Black"
  };
  // All properties for the character style we need for the line style:
  var charStyleProperties =
  {
      name : charStyleName ,
      fontStyle : "Bold"
  }
  
  // Check, if the needed styles are there:
  
  // The paragraph style.
  // using IS NOT VALID is recommended
  if(!doc.paragraphStyles.itemByName(paraStyleName).isValid)
  {
      var paraStyle = doc.paragraphStyles.add(paraStyleProperties);
  }
  else
  {
      var paraStyle = doc.paragraphStyles.itemByName(paraStyleName);
      paraStyle.properties = paraStyleProperties;
  };
  
  // The character style.
  // using IS NOT VALID is recommended
  if(!doc.characterStyles.itemByName(charStyleName).isValid)
  {
      var charStyle = doc.characterStyles.add(charStyleProperties);
  }
  else
  {
      var charStyle = doc.characterStyles.itemByName(charStyleName);
      charStyle.properties = charStyleProperties;
  }
  
  // At this point we have a valid paragraph style and a valid character style.
  // Now let's add a line style.
  
  /*
      Note and warning:
      In case the paragraph style already has one or several line styles we
      have to either remove them to get our new line style at "pole position",
      because there is no move() method to bring a new line style up in the stack of line styles.
  
      Or we have to redefine the first line style. Which is done below.
  
      About removing line styles:
      Tested and is not working with CS6. Could be a bug.
      paraStyle.nestedLineStyles.everyItem().remove()
      So I think it is best to loop through and remove them one by one.
  
  */
  
  // Redefining the first line style if there is already one.
  // Else add a new one.
  
  // Note: Using the properties-property is not working here:
  
  if(paraStyle.nestedLineStyles.count()>0)
  {
      paraStyle.nestedLineStyles[0].appliedCharacterStyle = charStyle;
      paraStyle.nestedLineStyles[0].lineCount = 1;
  }
  else
  {
      paraStyle.nestedLineStyles.add({appliedCharacterStyle : charStyle , lineCount : 1});
  }
  

  For DOM documentation, see the following sources:

  Jongware:

  InDesign JavaScript help

  Gregor Fellenz:

  InDesign ExtendScript API (8.0)

  InDesign ExtendScript API (10.0)

  InDesign ExtendScript API (11.0)

  Kind regards
  Uwe

• CSS styles double-click Properties

  Hello

  Everything worked well on my previous version of Adobe Dreamweaver cc 2015. This all started when I updated my CC 2015 build Dreamweaver 7714. Before when I double click on my definition of css rules rules Css Panel opened very well, but since I've updated my Dreamweaver whenever I double click on my css rule it will take me to css properties panel. So my question is how can we cancel it?

  The screenshot No.1

  

  Screenshot No.2

  

  Screenshot No.3

  

  The old Panel Styles still exists in 2015 CBWMS. If you have CSS designer open and click Ctrl + Alt + Shift + P it will come back, however it has been deliberately hampered because Adobe wants everyone to switch to CSS stylist. I guess this will be finally taken from the program altogether at some point.

  Personally, I hand code all my css by using the indicators of code in Code view. It is much faster than trying to scroll through all options in the CSS designer panels or the CSS Styles.

  You could go back to a previous version of the program if you like by following the instructions here: How to find and install the previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team is really the only way to return to a fully functional CSS Styles panel unfortunately.

• Double line with aggrigate function problem

  I want to see in my DB duplicate rows
  This query works fine
  
  SELECT COUNT (*),
  Description,
  fk_patprot,
  IsConfirmed,
  actual_schdate, fk_visit
  OF sch_events1
  Description of GROUP BY, fk_patprot, isconfirmed, actual_schdate, fk_visit having count (*) > 1
  
  
  But the thing is
  I want to see the event_id between the result column, event_id is not null and unique
  If I execute this query then output will be empty, said 0 selected lines.
  SELECT event_id,
  Count (*),
  Description,
  fk_patprot,
  IsConfirmed,
  actual_schdate,
  fk_visit
  OF sch_events1
  GROUP BY description, event_id, fk_patprot, isconfirmed, actual_schdate, fk_visit
  Having count (*) > 1
  
  
  What is the alternative for this request? I want these column in a query.
  
  EVENT_ID | DESCRIPTION | FK_PATPROT | ISCONFERMED | ACTUAL_SCHDATE
  1. AA | BB | CC | DD
  2. AA | BB | CC | DD
  3. QQ | QQ | QQ | QQ
  4. QQ | QQ | QQ | QQ
  5. QQ | QQ | QQ | QQ
  
  Thanks in advance
  
  Published by: Navneet Singh on July 22, 2011 08:34

  Hello

  One way to solve this problem is to use the function SUMMARY, rather than the aggregate COUNT:

  WITH     got_cnt          AS
  (
       SELECT     event_id
       ,      description
       ,     fk_patprot
       ,     isconfirmed
       ,     actural_schdate
       ,     fk_visit
       ,     COUNT (*) OVER ( PARTITION BY   description
                       ,            fk_patprot
                       ,          isconfirmed
                       ,          actural_schdate
                       ,          fk_visit
                        )     AS cnt
       FROM     sch_events1
  )
  SELECT     *
  FROM     got_cnt
  WHERE     cnt     > 1
  ;
  

  Most of the functions of aggregation (including COUNT) have analytical equivalents, which can produce the same results without causing the disintegration of all results in one line per group. The PARTITION BY clause from analytical functions corresponds to the GROUP BY clause in the aggregation queries.

• Double line nav don't line up properly - css prob?

  They want a double row of nav links at the top of the mast and I can't seem to align correctly.  I changed everything I know in css and nothing works.  It must be something simple, just can't find it...

  Any help would be greatly appreciated!

  (html and css files attached)  Thanks in advance!

  Give this style a try:

  .container {
       width: 770px;
       margin-top: 0px;
       margin-right: auto;
       margin-bottom: 0px;
       margin-left: auto;
       height: 4em;
  }
  
  #masthead ul {
       text-align: center;
       padding-top: 10px;
       padding-bottom: 10px;
       list-style-type: none;
       clear: both;
  }
  
  #masthead li {
       display: inline;
       font-size: 80%;
       padding-right: 0px;
       padding-left: 0px;
       float: left;
  }
  
  #masthead a {
       color: #FFF;
       text-decoration: none;
       padding-right: 0px;
       display: block;
       text-align: center;
       padding-left: 0px;
       width: 153px;
  }