HP TouchPad does not restart

Similar Questions

• Touchpad does not work on the Satellite A100-812

  Hello, I just bought a Toshiba Satellite A100-812 (C. Duo, 2 GB RAM, GF 7600, Vista Premium). I disabled the synaptics driver in msconfig. After a while, I turned on the driver but Touchpad still does not work. All the fn buttons work correctly (turning brightenswith FN + F6 or FN + F7 etc.) but FN + F9 (turning the Touchpad) does not always work.
  Help, please.

  ([email protected])

  Hello

  you did a reinstallation of the driver? I think that if you have disabled it with msconfig, it should work after reactivation and otherwise, to remove this driver and install it
  Once again. (So the touchpad) driver should be available after reinstalling and restarting Windows.

  Would be recognizing a few comments if it worked. :)

  Welcome them

• 350 laptop G1: Touchpad does not work after open the cover.

  Whenever I close the lid, when I open again the touchpad does not work.

  I have to restart or put the computer to sleep in order until the beginning of touchpad working again.

  I solved my problem!

  I have unistaled the driver PS/2 Synapatics 19.0.12.95

  Thouch pad suite to work without the driver and now I finally can close the lid and open it again and use the touch pad immediately.

• Re: HP laptop touchpad does not work after uninstall of kaspersky anti-virus (version of windows 7 32)

  Hello when I removed Kaspersky Antivirus, my HP 110.3135DX notebook touchpad does not work (Windows 7 in 32 version). can someone help me solve this problem?

  Hello

  Try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Safe Mode with Networking" and press ENTER.  When it has loaded, download driver Synaptics following, and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49601.exe

  Once finished, click on the Start Menu, open windows control panel, open programs and features, the Synaptics Pointing Device driver right click and choose uninstall.

  When this has completed, restart the computer and let Windows load normally, then open your Downlads folder and run the installer downloaded Synaptics previously - when it is finished, restart the laptop.

  Kind regards

  DP - K

• BlackBerry Z30 the touchpad does not work on my Blackberry

  Touchpad does not work after restarting my blacberry to factory settings.

  Do one or more of the following actions and try again.

  Restart: With the BlackBerry powereddevice, press and hold the power button on top about 20-30 seconds, ignore the 3-2-1 timer and hold the button until the screen goes black and you see the red LED.
  or
  Restart: With the phone smart BlackBerry turned on, using the keys of volume of the edge side, press on and hold the keys of volume for about 20 seconds and both of the Up, ignoring the initial message of screenshot... the screen go black, reboot.

• Mouse/Touchpad does not work

  I have a hp 2000-bf69wm, 8 64-bit windows.

  The touchpad does not work and is not a mouse cursor. Any suggestions?

  You could try a Hard Reset.

  Forced to Power Reset - "Hard Reset".

  • Perform the Hard Reset .  Start the computer and connect

  Hard Reset is a reset of the driver; This isn't Windows 8 resetting that installs the operating system.  The procedure to hard reset does not erase your files or it destroys your Windows installation somehow.

  Why a power reset works to solve some problems:

  Hard Reset erases the pilot instructions that generally persist to boot-to-boot.  The Hard Reset is a way to force the computer to read the instructions of drivers and software stored in the operating system.  The compensation action and forcing a new reading on the disk and software drivers can solve some problems.

  Sign in and check...

  =====================================================================================

  Find, open, and read the following file named: difficulty TouchPad / ClickPad

• This morning update of Firefox has been downloaded but does not restart the laptop. He's trying to start and the lights on the keyboard. He continually tries to restart. The screen is blank. It was working fine until I clicked on restart.

  PC IS A COMPAQ PRESARIO V6000 RUNNING WINDOWS XP

  PC DOES NOT RESTART AFTER THE LAST FIREFOX DOWNLOAD THIS MORNING

  The PC screen does not light and I think he's dead. It can be quite fortuitous, and there may be a hardware failure that he would have stopped working even without the download of firefox. I'll have to consider Repair shop and see if anything can be saved on the hard disk.

  Thanks anyway

  Dave

• Satellite X 200-219 - the touchpad does not work as it should

  Hi all

  I recently bought a 2nd hand Toshiba Satellite x 200-219. Had some problems with it that I have overcome now, except one... The touchpad does not work as it should. I think that the cable has been damaged at some point.

  So I'm wondering if I should use the same ribbon cable to connect the keyboard to the motherboard or can I get one of a different model of PC Toshiba laptop?

  I tried searching on the net for advice but have resulted in nothing so thought I would try the forums.

  Any help you can give will be greatly appreciated.

  Thanks in advance,

  Lee

  I think you can use the items to the satellite X 205 series since this seems to be the same series as X 200:
  Found some related parts the touchpad:
  Satellite X 205 / X 200 touchpad Board with cable: reference number: K000047950
  Satellite part number for the TOUCH PAD FFC X 205 / X 200: K000047980

  But why you n t come into contact with a Toshiba authorized service provider in your country and order the part necessary and compatible?

• Satellite S50T-B950 - touchpad does not work after update of Windows 10

  Hello "Toshiba."

  After the update for Windows 10 I have a problem with the touchpad does not work and became come boiling Forum and found that the solution is to uninstall "MOMENTUM Input Device" to "Device Manager", finally worked the touchpad, but alas multi touch properties such as: "zoom/minimize gestures of scrolling and two-finger" no longer work

  Please help me solve this company of Toshiba problem

  The same theme has been already discussed and resolved in this thread:
  https://Forum.Toshiba.EU/showthread.php?83885

  Then please follow the proceedings in the other thread to avoid misunderstandings

  by the way: here is the link to pilot site Toshiba win 10:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

• Qosmio X 300 - 11W - TouchPad does not work in mode 'sleep'

  TouchPad does not work in mode 'sleep'. I can't wake up my computer using a touchpad. I downloaded and installed a driver for Windows 7 32 bit from a page of the Synaptics driver, but it did not help.

  Can you wake up your Qosmio using the power button / stop?
  You close the lid when the laptop enters the sliding mode?
  After you open the laptop lid should wake up. It work correctly?

• Satellite A0302 C50D and Ubuntu 12.04.4 - touchpad does not work so well

  I have a Satellite C50D-A0302, PSCGWF part number.
  I use Ubuntu 12.04.4 LTS Pangolin specific to this topic, but the touchpad does not work so well.

  How can I get the right drivers for the touchpad?

  How do I know if the touchpad is Synaptics or ALPS, so I can get the correct drivers?

  Thank you!

  As you probably know Toshiba does not support Linux and does not offer Linux drivers.
  All about you Googling can find many Linux forums. Try to find useful information here. I mean you can exchange your experiences with other people who are fans of Linux and experts, so I assume that you can get help here.

• Satellite U940-103 with Linux - Touchpad does not & poorly programmed FN keys

  Hello

  I bought a toshiba Satellite U940-103, and I installed ubuntu 13,10 dual boot with windows 8.1.

  The problem is that the touchpad is not working and the fn are false (fn f2 key suspend the computer instead of the brightness control).

  I tried to install linux different sistem (Mint cinnamon 15, 13.04 ubuntu, ubuntu 12.04.3) but they still have the same problem, even in the live cd.

  I tried to ask the Italian Forum of ubuntu, but they have solutions do not work...

  Thanks for the help
  Yun

  * PS.* sorry for my bad English. Is it normal that my laptop seems overheated and my battery life seems to be reduced when I use Linux?

  Hello

  Yes, you're right!
  In the direct (stable mode without having to install), the touchpad does not work.

  However, once installed, it will work.

  In regards to shortcut keys, yes they are mapped correctly.
  They are treated to the old-fashioned way (former Toshiba models had the mapping used by Linux on this model).
  If you want help, file a bug report on bugs to Ubuntu system.

  You can always change the brightness by using the GUI (Control Panel > brightness & Lock).

  Fun with Ubuntu on your device!

  Tom BR

• Satellite PRO A200-1 s 1 with Windows 7 x 32. Touchpad does not work

  Hello world
  I installed Windows 7 on my Satellite Pro A200-1 s 1, recovered all the drivers on the Toshiba site, everything works fine (less than the webcam that doesn't work even with the previous s.o. XP or Vista...). But my Touchpad does not work... No Fn + F9, no drivers, nothing works. And in my control, Manager of Panel devices seem to be going well.
  Any suggestion?

  Hello

  You reinstall the driver for the touchpad?
  Check it!

  Also check if the option disable touchpad when USB mouse is connected is not checked. That are in the control panel-> mouse-> device settings

• El Capitan does not restart while updating

  El Capitan 10.11.3 trying to reboot the system to install 10.11.4. It closes all applications, there is only the trash and Finder icons in the Dock, but nothing happens.

  It is an opportunity to update to OS X without completely reinstalling the system? And why this is happening?

  Hi there bibimij,

  It seems that you install the 10.11.4 updated, but the computer does not restart on its own. There could be several reasons for something like that happening, but I'd first leave applications running when you run the update because there might be an application taking upward. If you are not sure whether or not you have closed them all, you can use Force Quit to quit any programs that may be running.

  Force a nearby application on your Mac.

  If this does not help, then I would then reset your PRAM:

  How to reset the NVRAM on your Mac.

  Test the issue once this has been reset. If she keeps going on although I would then start in safe mode so that some at the system level and hiding the kernel, as well as perform a disk check and repair if necessary.

  Try safe mode if your Mac does not end commissioning

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then exit the safe mode with a normal restart and test once more. Thank you for using communities of Apple Support.

• HP Pavilion TouchPad does not?

  Hello, I have the HP Pavilion dm4 2015-dx and this morning when I started my computer the touchpad does not work. I use a mouse and it works fine however. I tried the download Synaptics and followed the instructions but it didn't work. Help!

  Mastiucha,

  Take a look at this document - file mentions the methods used to enable / disable the TouchPad.

  You could jump repeat the reset method.

  Enable / disable the TouchPad

  Click on the star of congratulations !

  It's a big 'thanks' for the author's efforts.