Included applications are not installed

Similar Questions

• I installed java and active. But some shoeing that java applications are not installed and enabled.

  I use ubuntu 12.04. I installed java inside. In firefox also I activated it. But some allplicatios like keepvid showing that java is not installed or not enabled. Done all the priliminary troubulshootings as verification of restart and everything

  Hello

  Try checking your version of plugins:

  • Check plugins

  I don't see Java installed on your computer also.
  Where's the installer?

  • Java.com.

  Also:
  Try going to Subject: config search plugin.state.java and change its truevalue, too, go to Tools > > Addons > > Plugins and look for Java and change his option still active or have active

  • Subject: config

• This disc is should downloads to solve the problem of the device are not installed. (Code 28)

  This disc is should downloads to fix the drivers for this device are not installed. (Code 28)  There is no driver selected for the device information set or element.my pc works on windows 8.1 pro 64 bit model whose id is 15-e017AU. 

  Hello:

  I have attached the driver you need below in attachments.

  Go to Device Manager and click on the device that need pilots.  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.  Then restart.

• Downloaded secuity KB2619340 updates are not installed.

  Downloaded secuity KB2619340 updates are not installed. I ran Fixit, says all is OK, still won't install. I followed the instructions for the error message, found 0 x 80090017. Will still not installed. Help is appreciated.

  Hi, Aziz. I tried everything above, did not fix the problem (or maybe it was the case). I still have the updates icon in my taskbar when restarting. However, when you are prompted to install all or select updates individually, this time I checked manually. When the update has been highlighted in the list, a message window describing the details of the issue and also listed a URL for details. I followed this link, the description was another link to download. I downloaded the update manually and ran the apllication. Media Center both Excel 2010 security updates, I was given the opportunity to download the application for the updated, ran and installed OK. Update Power Point 2007 persisted. After restarting for the first two, I clicked again in the Update icon. To update Power Point jumps. On purpose I installed it, so it has shown failure retried. I retried and installed OK.

  Everything is good. I hope this helps someone else with a similar problem. It worked for me.

  Maybe after all the other options you suggest "paved the way" for my last efforts succeed.

  Thanks for your help.

  See you soon!

• dkafox1 lost all THE WINDOWS updates that THEY ARE NOT INSTALLED UPDATES

  Original title:

  dkafox1 lost all THE WINDOWS updates that THEY ARE NOT INSTALLED UPDATES, more problems with windows update. May HAVE a PROBLEM WITH REGISTRATION BUT DO KNOW NOT if this msi I HAVE HELPED.

  I have windows 7 x 64 Version 6.1.7600.16385. My windows update has only downloaded and installed a fix (KB947821 on 22/03/14. In the event err log # 2147942487command line: "C\:WINDOWS\SYSTEM32\WUSA '". "»» "EXE" "Windows Update Troubleshooter said" search for missing or corrupted files. I did a sfc/scannow and everything was fine, that the settings are incorrect... Went to computer management by looking at the windows log. Event ID was found in respect of the implementation of 3. Looks like I've lost all my updates. Window update is only showing KB947821 HOT of difficulty. All my other downloading updates for the past two weeks included Microsoft Office Update that I can't see anything there all gone. I check the installed updates and 14 updates that don't settle all gone. Windows Update indicates any problem or error #. It says Windows update installed "Never". I tried the solution to the difficulty of corruption problems MSI software update registration. Help I don't know where to go from here. I ran the windows Memory Diagnostic tool, which came with no error. In the community he sent me to back registry which I do not know how to do. Can I save on my hard drive or another source. He says type reedit32.exe. I have the windows 7 registry editor wants me to save the registry key or subkey > I do not know what files to back up or export. I'm not computer savvy, but I do what I can do better. Had problems with windows update not install and now not download or install 2 MOS. So where and how can I know what updates I need after that this problem is corrected.  Thank you

  If you want Office 2007 updates to appear in the installed updates again, you would need to uninstall/reinstall Office 2007 and install all the updates again.

  Assuming that Office 2007 is installed & working properly and no update is offered when you run a manual check for updates now, you might want to leave enough alone (that is, do nothing) - then see if the 2 updates for Office 2007 SP3 be released next Tuesday (a) receive, (b) successfully install and (c) are listed in the installed updates later.

  PS: The possible causes of the problem are messing with registry cleaners, messing around with the Software Distribution folder, and the fact that it was a computer refurbished when you bought it.

• Kindle Fire PC USB connectivity, the drivers for this device are not installed. (Code 28).

  I connect and transfer content from my computer to my Kindle all the time, but today when I plugged the Kindle my pc tells me that the device needed troubleshooting.  After you run the troubleshooter, I gives me this message:

  "The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver. »

  This has never happened before, and, no, I have not recently downloaded new applications, programs, updates or had a system crash. It was, as usual, a few things. Where it says "to find a driver for this device, click Update driver" which is non-interactive. I can see it, but you can't click on it. That's happened? What should I do?

  Scott.

  Hello Scott,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because the parameters or corrupt device drivers.

  I suggest you run this Microsoft fixit and check if it helps.
  Reference:
  Hardware devices do not work or are not detected in Windows
  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  Automatically, he diagnoses and fixes problems with the hardware. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  Please also try to update the device drivers by using the steps described in this article and check.
  Reference:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• I reinstalled creative cloud and Dw after having a problem with Windows 10, but they do not work after restarting my computer. It's as if they are not installed

  I reinstalled creative cloud and Dw after having a problem with Windows 10 and I restored it to windows 7, but they do not work after restarting my computer. It's as if they are not installed.  I worked through all the steps without result troubleshooting.  Everyone experienced similar?

  Hi Trickstar777,

  Please follow the steps below:

  • Please check if you have installed browser security extensions, please disable them. (For example: AD BLOCK, Advisor to Mcafee website, toolbar of internet security etc.)
  • Disable the firewall on your machine.
  • Turn off the firewall of the security program installed on the computer Internet. (Norton 360 - disable the following in it: Surf safely, firewall, browser protection, download intelligence)

  These changes are temporary you can restore these changes back to normal once your creative cloud application is in place and functioning *.

  (1) uninstall Creative Cloud Desktop Manager:

  Using creative cloud | Uninstall the creative cloud desktop application

  (2) delete following folders: (if you do not see any folder skip this step)

  C:\Program Files (x 86) \Common Files\Adobe\OOBE

  C:\Program Files (x 86) \Common Files\Adobe\Adobe Application Manager

  C:\Program Files (x 86) \Adobe\Creative Cloud files

  C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is folder hidden please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  \Adobe\ DONNÉES C:\Program rename SL-STORE like SL-STORE_OLD

  3 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Let us know if that helps.

• When I try to open my Adobe Pro downloaded on my Mac, I get an error message saying "Cannot open the application"Acrobat_2015_Web_WWMUI.exe"because the Microsoft Windows applications are not considered supported on OS X."

  When I try to open my Adobe Pro downloaded on my Mac, I get an error message saying "Cannot open the application"Acrobat_2015_Web_WWMUI.exe"because the Microsoft Windows applications are not considered supported on OS X."

  You must download and install the version of Acrobat Mac.

• Laptop HP 250 G2: the drivers for this device are not installed. F0Z43EA (code 28) - #ABT

  Hello

  I get this error:

  The drivers for this device are not installed. (Code 28)

  model: HP 250 G2 Notebook PC

  Model number: F0Z43EA #ABT

  PCI\VEN_10EC & DEV_5229 & SUBSYS_218F103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_218F103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00

  How I solve the problem?

  thnx

  Hello:

  You need this driver for the card reader:

  Download and install the driver first on the list from the link below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

• Satellite A300-1MC: network controllers drivers are not installed properly

  Hi guys...

  My first lol just purchased Toshiba and I can't ge the wireless to work?
  Toshiba A300 - 1MC Intel T5800 3gig of ram 20gig hard drive Vista Home wired Internet access works ok, but in Device Manager it says my network controller drivers are not installed properly?

  I have reset to setting faactory and reinstalled everthing but its still the same.

  Ideas a BIG help thanks in advance.

  This strange s
  Usually, using the operating system recovery disc must be set to the factory setting and everything should be ok.

  However, I recommend first upgrading the BIOS, then the LAN/WLan card driver.
  The card chip Realtek (Realtek 10/100 Base-TX) LAN and WLan card chip is Intel (Intel 802.11 a/g/n WiFi Link 5100AGN)

  Download the WLan driver from this page Toshiba WLan:
  http://APS2.toshiba-tro.de/WLAN/

  and the LAN driver can be downloaded from the Realtek page, or on site pilot European Toshiba too.
  Remove/uninstall the old drivers and then install the new drivers.

  Good bye

• "The build tools are not installed.

  I installed the LabVIEW FPGA Module of the 2011, the NOR-RIO 4.0 and NI LabVIEW Xilinx 11.5 tools.  When I hit the button on my FPGA VI, I get the message "the build tools are not installed" what module/driver/DVD installs the build tools?

  

  LabVIEW FPGA 2011 requires the Xilinx 12.4 tools to compile for objectives other than the Virtex-II.  These should be available on the 2011 LabVIEW platform DVD.

• Xilinx 14.7 tools are not installed

  Hi all

  No news to LV, but new to LV more FPGA. You try to compile a design I inherited another construction project. The worker compile complains that "14.7 Xilinx tools are not installed." But they are installed: I even did a quick construction of another design in ISE to verify that it still works.

  FWIW, I use eval all versions while you wait for the PO me treated. I installed 2013Xilinx14, I wonder if self-employed compile looking in the wrong place for the compiler (it stops right after the creation of the VHDL code).

  OS is Windows 7

  The LV version is 2014 14.0f1

  Targeting a sbRIO-9636, which is not installed on this PC

  Thoughts, anyone?

  See you soon!

  Crazy

  sdmadman wrote: I installed 2013Xilinx14, I wonder if self-employed compile looking in the wrong place for the compiler (it stops right after the creation of the VHDL code).

  You must install Xilinx 2014 LabVIEW tools.  2013 is delivered with Xilinx 14.4.

• The drivers for this device are not installed. (Code 28) __This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  I HAV these two errors in my drivers and windows cannot update, can any body healp me?

  Hello

  What devices are - if you can not tell what is the name, then you can specify the category of
  Device Manager - or both?

  --------------------------------------------------------------------------------------------------------------------

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
  ---------------------------------------------------------------------------------------------------------------------
  The drivers for this device are not installed. (Code 28)

  To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.

  ==================================================================

  Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.

  References to Vista also apply to Windows 7.
  
  If they show upward then try to manually install the drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Update "Compilation of Xilinx tools are not installed" thread for 2015

  I have Labview 2015, I need compile a vi for a Compact 9081 RIO fpga. I get the error "the Compilation of Xilinx tools are not installed. Install them using the support or download from ni.com installation. »

  OK, pretty simple. What download where? Is there a link?

  These Xilinx tools do not resolve the problem, I discovered only after you download all 9 gigabytes:

  http://www.NI.com/download/LabVIEW-FPGA-Module-2014/4845/en/

  http://www.NI.com/download/LabVIEW-FPGA-Module-2015/5492/en/

  Bonus question: where are the instructions that specify which download links to click on what material?

  This KB should list on what compilation of tools you need for your specific target.

  http://digital.NI.com/public.nsf/allkb/7CF3DD1ABBE6AE5886257EFB0006E303

  It can be a little confusing at first, but you need the Xilinx 14.7 for 2015 LabVIEW tools, that you can download from the following link. It seems that you have found the correct version of Xilinx, but it was for 2015 of LabVIEW which is what I assume is the problem.

  http://www.NI.com/download/LabVIEW-FPGA-Module-2015/5494/en/

  You can also try the cloud of compilation to ni.com/trycompilecloud

• Four updates (KB 2492386; 2515325; 2522422 982018) seem to settle down and complete the process at shutdown; However, at the start that they are not installed - Win7 64 + SP1

  Four updates (KB 2492386; 2515325; 2522422 982018) seem to settle down and complete the process at shutdown; However, at the start that they are not installed - Win7 64 + SP1.  Tried again several times since last week.

  BillBlackstone,

  KB982018 should be installed last, separately from other

  Install the 3 other updates manually

  Restart

  Back to updates of Windows and install KB982018

  Restart

  05/02 / 1108:16: 57 pm