Xilinx 14.7 tools are not installed

Similar Questions

• Update "Compilation of Xilinx tools are not installed" thread for 2015

  I have Labview 2015, I need compile a vi for a Compact 9081 RIO fpga. I get the error "the Compilation of Xilinx tools are not installed. Install them using the support or download from ni.com installation. »

  OK, pretty simple. What download where? Is there a link?

  These Xilinx tools do not resolve the problem, I discovered only after you download all 9 gigabytes:

  http://www.NI.com/download/LabVIEW-FPGA-Module-2014/4845/en/

  http://www.NI.com/download/LabVIEW-FPGA-Module-2015/5492/en/

  Bonus question: where are the instructions that specify which download links to click on what material?

  This KB should list on what compilation of tools you need for your specific target.

  http://digital.NI.com/public.nsf/allkb/7CF3DD1ABBE6AE5886257EFB0006E303

  It can be a little confusing at first, but you need the Xilinx 14.7 for 2015 LabVIEW tools, that you can download from the following link. It seems that you have found the correct version of Xilinx, but it was for 2015 of LabVIEW which is what I assume is the problem.

  http://www.NI.com/download/LabVIEW-FPGA-Module-2015/5494/en/

  You can also try the cloud of compilation to ni.com/trycompilecloud

• "The build tools are not installed.

  I installed the LabVIEW FPGA Module of the 2011, the NOR-RIO 4.0 and NI LabVIEW Xilinx 11.5 tools.  When I hit the button on my FPGA VI, I get the message "the build tools are not installed" what module/driver/DVD installs the build tools?

  

  LabVIEW FPGA 2011 requires the Xilinx 12.4 tools to compile for objectives other than the Virtex-II.  These should be available on the 2011 LabVIEW platform DVD.

• VMware tools are not installed

  I have vmware player v6 on a windows machine

  I installed windows 7 as a virtual machine on a windows computer, but I can't get vmware tools to install - because the installation process does not start.

  In the vmware window, I click on manage/player/install VMware tools and nothing happens, never. I get no start installation upward. So I tried also to start/run/D:\setup and I get "Please insert a disc into the dvd drive. It's so useless, nothing I will get the installer to start and after trawling google ages each page says the same thing, which is what I tried already and who never works. WTF |. I have to do to get the vmware tools installer to run?

  Edit: I also tried to download and tools-windows - 9.6.1.exe running and who has done sweet FA as well.

  If you are using VMware Player 6.0,1 on a Windows host and you want to install VMware Tools in Windows 7, then do what follows is workaround to which question you encounter that does not automatically download the VMware Tools.

  Tools-windows - 9.6.1.exe.tar on the host, not the comments, download and unzip it.  Then run the file tools-windows - 9.6.1.exe.  This (silently) installs VMware Tools for Windows (windows.iso) in the working directory of VMware Player.  You should then be able to install VMware Tools normally on the Menu, but if it doesn't work then fix the windows.iso of CD/DVD virtual machine and run the installation from the Windows virtual machine.

• How to get address Virtual Machine MAC on which vmware tools is not installed

  Hello

  I'm putting the MAC address of a virtual machine in a string. At first, I was using this script:

  strMACAddress = objVM.guest.net [0] .macAddress;

  But as indicated in the title, the vmware tools are not installed on the virtual machine. I found a similar position in vSphere Web Services SDK:

  http://communities.VMware.com/thread/254204

  In this post, it is specified to use the script VcVirtualEthernetCard() object. I'm new to Orchestrator and I do not understand how to make a "myVcVirtualEthernetCard" link to my virtual computer object 'objVM '.

  Example:

  IN: objVM (VcVirtualMachine)

  OUT: macAddress

  var myVcVirtualEthernetCard = new VcVirtualEthernetCard();

  macAddress var = myVcVirtualEthernetCard.macAddress;

  Thank you for your help.

  Kind regards

  Fred

  Hello!

  You can browse the table config.hardware.device of the virtual machine:

  IN: vm (Vc:VirtualMachine)

  DEPARTURES: Macaddresses (Array/string)

  //initialize macAddresses array (to make a push() possible later)
  macAddresses = new Array();
  var deviceArray = vm.config.hardware.device;
  if (!deviceArray) throw "Error getting hardware config array of VM";
      System.debug("deviceArray: " + deviceArray);
  //loop through array, find NICs and retrieve there MACs
  for (var i in deviceArray) {
      var currentDevice = deviceArray.pop();
      if (currentDevice) {
          System.debug("currentDevice: " + currentDevice);
          if (currentDevice instanceof VcVirtualE1000 ||
              currentDevice instanceof VcVirtualPCNet32 ||
              currentDevice instanceof VcVirtualVmxnet ||
              currentDevice instanceof VcVirtualVmxnet2 ||
              currentDevice instanceof VcVirtualVmxnet) {
                  System.debug("found network card on " + currentDevice);
                  macAddresses.push(currentDevice.macAddress) ;
          }
      }
  }
  

  Please let me know if it works for you, or if you need more information :-)

  Kind regards

  Joerg

• The cutting tool are not sent Snip to the e-mail recipient.

  The cutting tool are not sent Snip of recipient of mail on Windows Live Mail 2011.  Had worked on earlier versions.  Click on the send Snip button, and nothing happens.

  A couple of things you could try.

  Launch the tool captures via a right click on it and select 'run as administrator '.

  See if the uninstallation and reinstallation of the Snipping Tool makes a difference.

  This is a quote from Ronnie Vernon.

  "Try refreshing the Snipping Tool installation. This tool is part of the Tablet PC optional components in Windows Vista.

  Open Control Panel, click Classic view in the task pane.

  Double-click programs and features.

  Click on the 'activate Windows features and turn off' in the task pane.

  This window may take a few minutes to display.

  When the options appear in the list, scroll to the "Tablet PC Optional Components" and remove the check mark for this element.

  Click OK, quit everything and restart the computer.

  This allows to uninstall the "Snipping Tool" System.

  Once the computer restarts, go back to the Panel and repeat the same procedure.

  This time the check box adds the "Tablet PC Optional Components".

  This will install these components in the system with a new copy of all the files. »

• Several windows updates are not installed and the error code given is 66A

  Original title: updates

  Several windows updates are not installed and the error code given is 66. However the error is considered to be unknown and the code is not useful to find a solution. Anyone know what the code means, or we mean?

  Hello

  1 did you change on your computer before this problem?

  Follow the suggestions and check if it works.

  Method 1

  You can reset Windows Update components and see if it works fine.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Method 2

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  See also:

  Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update

  http://support.Microsoft.com/kb/2507641/en-us

• dkafox1 lost all THE WINDOWS updates that THEY ARE NOT INSTALLED UPDATES

  Original title:

  dkafox1 lost all THE WINDOWS updates that THEY ARE NOT INSTALLED UPDATES, more problems with windows update. May HAVE a PROBLEM WITH REGISTRATION BUT DO KNOW NOT if this msi I HAVE HELPED.

  I have windows 7 x 64 Version 6.1.7600.16385. My windows update has only downloaded and installed a fix (KB947821 on 22/03/14. In the event err log # 2147942487command line: "C\:WINDOWS\SYSTEM32\WUSA '". "»» "EXE" "Windows Update Troubleshooter said" search for missing or corrupted files. I did a sfc/scannow and everything was fine, that the settings are incorrect... Went to computer management by looking at the windows log. Event ID was found in respect of the implementation of 3. Looks like I've lost all my updates. Window update is only showing KB947821 HOT of difficulty. All my other downloading updates for the past two weeks included Microsoft Office Update that I can't see anything there all gone. I check the installed updates and 14 updates that don't settle all gone. Windows Update indicates any problem or error #. It says Windows update installed "Never". I tried the solution to the difficulty of corruption problems MSI software update registration. Help I don't know where to go from here. I ran the windows Memory Diagnostic tool, which came with no error. In the community he sent me to back registry which I do not know how to do. Can I save on my hard drive or another source. He says type reedit32.exe. I have the windows 7 registry editor wants me to save the registry key or subkey > I do not know what files to back up or export. I'm not computer savvy, but I do what I can do better. Had problems with windows update not install and now not download or install 2 MOS. So where and how can I know what updates I need after that this problem is corrected.  Thank you

  If you want Office 2007 updates to appear in the installed updates again, you would need to uninstall/reinstall Office 2007 and install all the updates again.

  Assuming that Office 2007 is installed & working properly and no update is offered when you run a manual check for updates now, you might want to leave enough alone (that is, do nothing) - then see if the 2 updates for Office 2007 SP3 be released next Tuesday (a) receive, (b) successfully install and (c) are listed in the installed updates later.

  PS: The possible causes of the problem are messing with registry cleaners, messing around with the Software Distribution folder, and the fact that it was a computer refurbished when you bought it.

• Included applications are not installed

  I bought a used 12 '' MacBook and iWorks apps are supposed to be included, but they are not installed and they cost money in the app store. Is it possible to get them for free, or do I have to pay for them? Is it because the previous owner had attached to his apple ID, or something like that?

  Benjamizer wrote:

  I bought a used 12 '' MacBook and iWorks apps are supposed to be included, but they are not installed and they cost money in the app store. Is it possible to get them for free, or do I have to pay for them? Is it because the previous owner had attached to his apple ID, or something like that?

  You are quite correct - the applications are related to the Apple - ID probably to the former owner

• Laptop HP 250 G2: the drivers for this device are not installed. F0Z43EA (code 28) - #ABT

  Hello

  I get this error:

  The drivers for this device are not installed. (Code 28)

  model: HP 250 G2 Notebook PC

  Model number: F0Z43EA #ABT

  PCI\VEN_10EC & DEV_5229 & SUBSYS_218F103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_218F103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00

  How I solve the problem?

  thnx

  Hello:

  You need this driver for the card reader:

  Download and install the driver first on the list from the link below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

• Satellite A300-1MC: network controllers drivers are not installed properly

  Hi guys...

  My first lol just purchased Toshiba and I can't ge the wireless to work?
  Toshiba A300 - 1MC Intel T5800 3gig of ram 20gig hard drive Vista Home wired Internet access works ok, but in Device Manager it says my network controller drivers are not installed properly?

  I have reset to setting faactory and reinstalled everthing but its still the same.

  Ideas a BIG help thanks in advance.

  This strange s
  Usually, using the operating system recovery disc must be set to the factory setting and everything should be ok.

  However, I recommend first upgrading the BIOS, then the LAN/WLan card driver.
  The card chip Realtek (Realtek 10/100 Base-TX) LAN and WLan card chip is Intel (Intel 802.11 a/g/n WiFi Link 5100AGN)

  Download the WLan driver from this page Toshiba WLan:
  http://APS2.toshiba-tro.de/WLAN/

  and the LAN driver can be downloaded from the Realtek page, or on site pilot European Toshiba too.
  Remove/uninstall the old drivers and then install the new drivers.

  Good bye

• The drivers for this device are not installed. (Code 28) __This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  I HAV these two errors in my drivers and windows cannot update, can any body healp me?

  Hello

  What devices are - if you can not tell what is the name, then you can specify the category of
  Device Manager - or both?

  --------------------------------------------------------------------------------------------------------------------

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
  ---------------------------------------------------------------------------------------------------------------------
  The drivers for this device are not installed. (Code 28)

  To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.

  ==================================================================

  Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.

  References to Vista also apply to Windows 7.
  
  If they show upward then try to manually install the drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Four updates (KB 2492386; 2515325; 2522422 982018) seem to settle down and complete the process at shutdown; However, at the start that they are not installed - Win7 64 + SP1

  Four updates (KB 2492386; 2515325; 2522422 982018) seem to settle down and complete the process at shutdown; However, at the start that they are not installed - Win7 64 + SP1.  Tried again several times since last week.

  BillBlackstone,

  KB982018 should be installed last, separately from other

  Install the 3 other updates manually

  Restart

  Back to updates of Windows and install KB982018

  Restart

  05/02 / 1108:16: 57 pm

• newly installed windows xp home updates are not installing. error 0 * 80240036 & 0 * 80244019 make their appearance, help to solve.

  Dear Sir/Madam,

  I installed MS XP HOME in my PC, but the updates are not installing. error 0 * 80240036 & 0 * 80244019 make their appearance, help to solve.

  Kind regards

  Joseph

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/new-install-Windows-XP-Home-cant-get-updates-i-get/bbfa786f-40B2-4419-85DD-ba718b674716

  Look at the tricky300 post in this thread.

• SM Bus controller device drivers are not installed (code 28) XP Home Edition

  Recently, I installed Norton 360 and ran a diagnostic report which found the device SM Bus controller drivers are not installed (code 28).  I tried to re - install from the original disc of XP Home Edition, but he couldn't find it.  Where can I download this from and how to install iI?  Thank you.

  Hello

  Thanks for posting your query in Microsoft Community.

  According the information you have provided, I understand that you found the error code 28 in Windows XP. I will certainly help you in this matter.

  Please follow the link and check it out.

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  Using the windows-related issues feel free to post on the Microsoft Community Forum.