Incompatibility of file - Windows Validation

Similar Questions

• Error opening a VI (LabVIEW: unable to load dynamic library due to lack of external symbols or dependencies, or a format file not valid.) The file could not be loaded)

  Hi all!

  Yesterday, I worked all day in a VI and today, unfortunately, I'm frustrated when I tried to open it. Received the following error message:

  LABVIEW: Unable to load dynamic library due to lack of external symbols or dependencies, or a format file not valid. The "ENG633 v1.vi" file could not be loaded.

  This message repeats when I try else open a Subvi.

  Step by step:

  1. I created a copy of the LabVIEW VI example: "FuzzyEx Tanks with control of PI." I kept the copy in the same original directory.

  2 - I have edited the copy, created Subvi etc.

  3 - once I finished my course of programming I closed all the cut (ctrl-x) files and copied (ctrl v) into the other folder.

  4. then I tried to open the next day and... bug! I just couldn't do

  What can I do to open/recover the VI?

  I am using 32-bit LabVIEW 2016 in a Windows 10

  I tried opening them and got the same error you did, so I them opened with a hex editor to see if there was something in the file, and there is literally nothing other than the value of 0x00 for the entire file.

• When I want to print my coreldraw 13 error "file of valid workspace not found in the specified path.

  whenever I try to print a document on my coreldraw is will just put "file of valid workspace not found in the specified path.

  Hello

  Thanks for posting your question in the Microsoft community forum!

  I understand that you encounter printing problems in CorelDraw. I will try to help you with this.

  (1) is the issue limited to only Corel Draw?

  I suggest you to restore the default values by pressing the F8 key while the program starts.

  Reference: File not found valid environment...

  http://CorelDRAW.com/forums/t/4156.aspx

  If the problem persists, I suggest you contact the link mentioned below for the best support.

  http://CorelDRAW.com/forums/

  Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Computer has recently been corrected it now say windows is not genuine, go online to solve the problem. Windows validation does not any ideas how I can fix this

  Computer has recently been corrected it now say windows is not genuine, go online to solve the problem.  Windows validation does not any ideas how I can fix this

  Visit: http://www.microsoft.com/genuine/diag/> and click on "start the Diagnostics.

  IMPORTANT -online if you run Windows 7 or Vista 64-bit, you must Access the site via IE 32 bits only!]

  `~`

  Try the number listed here appropriate phone: phone numbers Microsoft Activation centers worldwide:

  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx>

  `~`

  If you are still not able to validate your Vista installation, follow these steps:

  I. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062>

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  II. after running the tool, click on the button continue, and then click the copy button (to the Clipboard).

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  III. start a new thread in the following Microsoft Genuine Advantage forum and paste the results of the diagnosis of MGA tool in your post, and a clear description of your problem:

  >>

  >

  IV. A help desk specialist will analyze the data and recommend an appropriate solution.

  UTC/GMT is 21:28 Friday, December 2, 2011

• A .cab file needed for installation is not reliable. Please check the Cryptographic Services are enabled and that the cab file is valid .__Help! __

  OK, so I need DirectX 0.9 c to the game red alert 3, but I can't on the new directx installed on my computer because of this error
  A .cab file needed for installation is not reliable. Please check Cryptographic Services are enabled and the certificate file is valid.

  have you tried solutions on how to solve this problem posted by mods on the previous posts with a similar problem, but it does not work for me

  help is appreciated, thanks

  Game of automatic encryption Services Cryptography on AutoServices and then try again to install the program. To set the cryptographic on AutoServices, follow these steps:

  1. Start the Administrative Tools utility in control Panel.
  2. Double-click Services.
  3. Click Cryptographic Services, and then click Properties.
  4. Click Automatic for Startup type, and then click Start.

  Reference: http://support.microsoft.com/kb/822798/ and follow all practices listed in the article.

  Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they could be.

• Icons and links do not work, they all say .encre and get an error "to open this file, windows needs to know which file was used to create".

  I uninstalled a program a few days ago and I think that it uninstalled the things I needed. All my icons tell .lnk and a message appears that says "to open this file, windows needs to know which file was used to create it.  I can't access my add or remove program file.

  I can't delete email, a lot about different programs does not work when I click on them with my mouse.  I have windows 2005.  My PC is in good condition with a lot of memory left and I have antivirus protection.  Help?

  Hello

  I suggest following the link below and follow the steps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/Windows-file-associationunable-to-load-eg-vlcink/d14b86ae-b02f-40fd-bf3f-5bf7922f5542

  I hope that the above information is useful!

• shared files Windows server 2008 when I try to access the logged error shows try 704 form again later.

  shared files Windows server 2008 when I try to access the logged error shows try 704 form again later. While it uses this file from the last three months

  Hi Maury,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum. Please post your question in the TechNet Windows Server 2008 R2 Networking - read only forum.

• Error "windows cannot open this file. to open this file, windows needs to know what program you want to use to open it"appears just after the start on its own.

  After that I typed my password at startup, windows can not open this file. to open this file, windows needs to know what program you want to use to open it.  At this point, I have no one based on nothing and and messages appear literally on its own. I think it's done my computer very slow also.

  What can I do to fix this?

  It's a site file

  Hi Jose7777777,

  • What version of Windows are you using?
  • How long have you been faced with this problem?
  • Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also view the startup folder.

  I hope this helps.

• I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions.

  Original title: Windows File Protection Pop Up Message.

  I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions. To maintain system stability, Windows must restore the original versions of these files. Insert your Windows XP Home Edition CD-Rom now. The problem is that I do not have this CD and need a way to solve this problem. Thank you

  Hello

  1. have you made any hardware changes or software on the computer before this problem?
  2. when exactly you receive popup?

  Run SFC scans the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

• Corrupt file Windows - how to run CHKDISK utility?

  I got messages saying corrupt file - WINDOWS - file or directory c:\documents and settings\allusers\application data\norton\-}oc55co96-of1d-4f28-aaa2-85ef5911267e7}n360_5.1.0.29\definitions\bashdefs is damaged and unreadable, please run the CHKDISK utility.   I don't know how to do in the face of what can someone help me?

  Open a run window (Windows Logo key + R), type chkdsk /r and press ENTER. Let him run the next time that you restart the computer or restart it now.

• When I update a message says that I must have a genuine windows validation and wait.

  When I update on windows a message says that I have to have a genuine windows validation and wait. Then I get a blank screen on http://www.microsoft.com/genuine/validate/ValidationResult.aspx?displaylang=en&End=http%3a%2f%2fwww.update.microsoft.com%2fmicrosoftupdate%2fv6%2fdefault.aspx&ReportSuccess=true&cCode=USA&Error=10&PageName=validate

  It is also interfering with my security program (ESET doesn't let me update my virus signature database.

  Thank you

  Thanks a lot for your quick response. The problem was my clock that has been set to the future (accidentally left there yesterday when checking the dates). Maybe it was wishful thinking.

• Message appears in the corner of my office: "you may be victim of software counterfeiting. This copy of windows does not pass genuine windows validation. »

  How can I remove "ask for authentic" microsoft in my computer software?

  It shows a message to the right down corner of my desk that says "you may be victim of software counterfeiting. " This copy of windows does not pass genuine windows validation. »

  "Once you install a Windows operating system license 'authentic', the" ""you may be victim of software counterfeiting " notification will disappear.

• c:\Program Files\Windows Media Player\Visualisations\clarity.dll

  IObit Malware fighter detects the following: Trojan Dropper file in c:\Program Files\Windows Media Player\Visualisations\clarity.dll. I am unable to find any information present on internally. Is this a secure Microsoft file. Can you please help or advise?

  Hi Lithium55,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Start, click run and then type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompts, the following line and press ENTER:

  sfc/scannow

  See also:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

   

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Let us know if it helps.

• Cannot start because of missing or damaged file: \Windows\AppPatch\drvmain.sdb.

  Everything was fine when last stopped.  Then this error message.  Cannot get to anything that will open any program or allow me to run a CD.  Cannot start because of missing or damaged file: \Windows\AppPatch\drvmain.sdb.  Cannot run CHKDSK or use reinstall the CD because there is no place to run is.  Cannot get to Norton to uninstall.  Help!

  Hello

  If we can start safe mode?

  If so, we can perform Clean Boot Troubleshooting:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  If this isn't the case, then we might need a Windows XP CD in order to move forward.

  Let us know.

  Best regards

  Matthew_Ha

• Windows does not start due to a lack or corrupt the file "\windows\system32\config\system.

  Original title: problems with \windows\system32\config\system.

  I met a now well-known problem where Windows will not start due to missing or corrupt file "\windows\system32\config\system" now, I have read articles about how to solve the problem but they all involve some kind of recovery cd while I use a Toshiba Mini NB205-N312/BL and have the cd player.  Any help to find a solution to this problem by using a usb key would be very appreciated.

  Hi Ickido,

  You have the disc to install Windows with you?

  If you do not have the Windows XP installation disk, I recommend you to make arrangements for a disc that is the same edition as it is installed on your machine.

  Subsequently, try performing a manual system restore by following this link.

  How do I recover from a corrupted registry that prevents Windows XP startup

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.