I need an alternative to the logic (I will only use a lot of power)

Similar Questions

• If you use Firefox I can not long enlargement of two fingers to work on my Apple. The same site will expand using Safari, so I guess it has to do with Firefox

  If you use Firefox I can not long enlargement of two fingers to work on my Apple. The same site will expand using Safari, so I guess it has to do with Firefox

  Some actions have been removed in Firefox 4 and later versions.

  You can restore the zoom feature by changing the related values of downtown on the topic: config page.

  browser.gesture.pinch.in -> cmd_fullZoomReduce
  browser.gesture.pinch.in.shift -> cmd_fullZoomReset
  browser.gesture.pinch.out -> cmd_fullZoomEnlarge
  browser.gesture.pinch.out.shift -> cmd_fullZoomReset
  browser.gesture.pinch.latched -> false
  

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed see the bold (user set).
  • Preferences you can restore the default value or change via the context menu.

• Format of the clips that will be used to export the largest project.

  At the time of PE2, I used to capture and cut a clip and "export movie" which resulted in an "DV - AVI.  This is what I understood "loved" EP and the best format to use for the import of a larger project (and it worked well every time).  Now, in PE11, I don't see this option.  This method is useful, not only to cut the stuff you don't want, but naming clips to help with an id of content.  Which option should I use who maintains the quality and cooperates with EP better?

  BobSomr wrote:

  I'm on now, and there is no scrolling feature in the Panel "Publish + Share".  Not even on the right side of the Panel, which is already completely to the right.  What I see, it of web - DVD, disk, Online, computer and phone Mobile and players.  Where is my DV - AVI or "AVI with DV preset?

  By the way, I noticed the "file > export... ' is grayed out for the old way of doing this.  Is how important it?

  Click on 'computer '.  Then you can scroll to "AVI".  Then there is DV presets.

  Hope that helps.

  Bill S

• The mouse wheel will only up to?  Bridge (Photoshop CS4)

  I am facing a problem with Bridge (CS4) where the mouse wheel scrolls only upward.   Any attempt to scroll down causing the erratic behavior.   If you scroll at a normal speed, it always returns to the top.  If you rotate the mouse toward the low fast roulette, bridge is going through some then go up a little.   No problem in any other product such as Photoshop CS4 Adobe.

  Has anyone reproduces this behavior?

  Any solution?

  NOTE: WACOM Tablet mouse works correctly.

  Kind regards

  Valerie

  I had the same problem until I downloaded the 64 bit Windows 7 drivers of

  http://www.Microsoft.com/hardware/download/download.aspx?category=MK&type=mouse&SKU=QVA-00 001

  .

  Pablo

• If the INSTR function will not use the INDEX o?

  Hi all
  
  
  I have a querry as

      Select * from Tab1 Where Instr(Tab1.Col1,'XX') >0 ;

  Is simple index on column Col1. If we use the index will be used or full table scan will happen in this scenario?
  
  Please give me explanatory answer because I have doubts
  
  
  Dhabas

  Hello

  You must use the index function if you want to avoid the full table scan. Check this box

  SQL> create table tab1(col1 varchar(20))
    2  /
  
  Table created.
  
  SQL> insert into tab1 values ('XXAB')
    2  /
  
  1 row created.
  
  SQL> create index col1_idx on tab1(col1);
  
  Index created.
  
  SQL> explain plan for Select * from Tab1 Where Instr(Tab1.Col1,'XX') >0;
  
  Explained.
  
  SQL> set autotrace on
  SQL> Select * from Tab1 Where Instr(Tab1.Col1,'XX') >0;
  XXAB
  
  Execution Plan
  ----------------------------------------------------------
     0      SELECT STATEMENT Optimizer=ALL_ROWS (Cost=5 Card=1 Bytes=12)
     1    0   TABLE ACCESS (FULL) OF 'TAB1' (TABLE) (Cost=5 Card=1 Bytes
            =12)
  
  Statistics
  ----------------------------------------------------------
            4  recursive calls
            0  db block gets
           32  consistent gets
            0  physical reads
            0  redo size
          234  bytes sent via SQL*Net to client
          280  bytes received via SQL*Net from client
            2  SQL*Net roundtrips to/from client
            0  sorts (memory)
            0  sorts (disk)
            1  rows processed
  
  SQL>  create index col1_idx2 on tab1(Instr(Col1,'XX'));
  
  Index created.
  
  SQL> Select * from Tab1 Where Instr(Tab1.Col1,'XX') >0;
  XXAB
  
  Execution Plan
  ----------------------------------------------------------
     0      SELECT STATEMENT Optimizer=ALL_ROWS (Cost=2 Card=1 Bytes=12)
     1    0   TABLE ACCESS (BY INDEX ROWID) OF 'TAB1' (TABLE) (Cost=2 Ca
            rd=1 Bytes=12)
  
     2    1     INDEX (RANGE SCAN) OF 'COL1_IDX2' (INDEX) (Cost=1 Card=1
            )
  
  Statistics
  ----------------------------------------------------------
           28  recursive calls
            0  db block gets
           22  consistent gets
            0  physical reads
            0  redo size
          234  bytes sent via SQL*Net to client
          280  bytes received via SQL*Net from client
            2  SQL*Net roundtrips to/from client
            0  sorts (memory)
            0  sorts (disk)
            1  rows processed
  
  SQL> 
  

  Thank you
  AJ

• When the file transfer will be used to send a message?

  Hello
  
  I think I know that a message is sent only through file transfer if the message size is greater than 75% of the capacity of IPC queue; file transfer would never be used in response to a deadlock situation that arises because of the number of messages that are exhausting the capacity of the queue (this will result in a failure immediately if TPNOBLOCK indicator is used, or else a failure response when the timeout is reached).
  
  You get the following message in the ULOG:
  
  "TMQUEUE.4288.3081606848.0: LIBTUX_CAT:1285: WARN: tpreturn message was blocked, try file transfer.
  
  I'm just assuming it of because of the size of the message, or is it something specific to the operations of TMQUEUE? If we're not my understanding of how the drive transfer can occur, please put me straight!
  
  Thank you
  Malcolm.

  Malcolm,

  Tuxedo will use file transfer, if

  (a) the size of the message is greater than 75% of the total capacity of the queue.
  (b) the original msgsnd() fails with EINVAL. (Some operating systems have a parameter to the kernel configuration MSGMAX limiting the size of an individual message that can be set less than the total capacity of the queue. If an application tries to send a message larger than this size it will fail with EINVAL).
  (c) the original msgsnd() lock will fail with EAGAIN and the message is sent by tpreturn(). (This is the case where the LIBTUX_CAT:1285 is connected).
  (d) the original msgsnd() lock will fail with EAGAIN, TPNOBLOCK option is not set, the original message is more than 500 bytes, the TMNOTHREADS environment variable is not defined on Y and the message is not sent by certain system threaded process who are still single.

  For gateways to field only, the transfer file in case (c) can be avoided if GW_FILETRANSFER = OFF is set.

  Kind regards
  Ed

• Need for treatment of the base image, but only have Linux

  Hello, I am pretty inexperienced and working on a project in which a device is attached to a moving stage of XY. The goal is for the camera to track toward moving below real-time, then follow them. To do this, I need a very basic image processing. However, I don't know how to order the engines for the X - Y stage without a tool only Linux, so I use Linux LabVIEW, which apparently does not support the NI Vision or MATLAB script nodes. I need to make a basic image processing (described below) very quickly, using the images I capture in LabVIEW. I know that Python, Java, MATLAB and c a little. Now all I can think is to make a C library that makes the treatment (despite my relative inexperience), then calling it a LabVIEW. That would be good because LabVIEW can pass the image of C by reference, while I do not know how to interface with MATLAB or Python without, say, a TCP connection, which would not be able to use pass by reference (I think?) Are there other ways to achieve this? Perhaps a clever way to interface with MATLAB, or is there a way to get the Vision in LabVIEW for Linux? Most importantly, it's just to find the center of mass of the very black worm, so it should be easy: simply restrict the image of a region of interest, threshold, choose the largest connected blob and calculate the center of mass. However, I might later want also to seek points of calibration on the image; I think it would be easier to just pull long, straight lines, under the camera, then detect those somehow. Thank you!

  
  

• Need help to import the DVD that I made using Windows Movie Maker

  I made a slide show DVD in my computer XP using WMM. I thought that I taped on the C drive first, but I can't access either one to make changes. I can view the DVD using Windows Media Player, but I want to change it

  For a re-release in Movie Maker, you need the. MSWMM
  project folder. Do a search for your folder my videos and
  see if you can find it... Maybe you saved before you
  created the DVD.

• I need a driver for the Officejet 150 Mobile, I use an iPad air

  I use an iPad with iOS operating Air 7

  Hello

  iPad Air uses no drivers, it uses apps and at this stage no app to Apple for the iPad printing using Bluetooth. iPad and IPad Air can print via WiFi using the following application:

  http://iTunes.Apple.com/au/app/HP-eprint/id299531647?Mt=8

  Kind regards.

• The VI "VISA set up the Serial Port" will only work at 9600 baud

  I wrote a Serial Port RS232 RW.vi monitor of ' "which works for most. The problem is that it will not meet the alternative port configuration settings... For example: the default RS232 serial port configuration is:

  (COM1, 9600 baud, 8 data bits, 1 stop bit, no without parity)

  As a test, I use a Null Modem cable to connect to my LabView Com1 port to another PC running RealTerm Serial Port Monitor... Using my "RW.vi RS232' newly designed with the port settings of (COM1, 9600 baud, 8 data bits, 1 stop bit, no without parity), I can send and cannot receive data back throughout the day no problem...

  However, if I configure the port "RW.vi RS232" all other configurations, such as (COM1, 2400 baud, 7 data, 1 stop bit, odd parity bits)... He will not take the expected risks and continues to operate @ 9600 baud rate etc.

  Then, I changed the settings default "RS232 RW.vi" (2400,7,1, Odd)

  He still refuses to derogate (COM1, 9600,8,1, no...)

  I also went in the Device Manager of Win XP on the system of LabView and configured manually Com1 2400,7,1, Odd

  and yet,... work at the "RS232 RW.vi" @ 9600,8,1, none

  Everyone can test my VI in the car and see if they have the same problem of not being able to see the new changes in the Port configuration settings... other than (COM1, 9600,8,1, no...)...?

  FYI... Unfortunately my LabView runs on Version 6.0, you may need to up-conversion of the attached vi

  Instead of simply appreciate the comments, you need to implement.

  Having closed VISA inside the loop is definitely the problem.  And Crossrulz is 100% correct about the problem being that the serial port gets zero to default baud rate after the closure of the port.  Here's the proof.

  

  Note that while may have set the port settings manually in the Device Manager, these parameters are reviewed by the pilot VISA.  If you look in the measurement and Automation Explorer under devices and Interfaces > serial and Parallel, you'll see the default settings using the VISA driver.  If you change this setting, your program will work as desired.  But this is not the appropriate fix.  The correct solution is to get the VISA close out of the while loop.

  The port settings are established in this order.

  1. by Windows device drivers.

  2. by the VISA driver as set in MAX.  Since you are using VISA, these settings will be automatically replace #1.

  3. by the port settings, you set programmatically in your LabVIEW program.

• Unable to connect to the internet, WLAN will only connect to "local access" and does not recognize my home group / network

  I bought a new router and configured the router by using the LAN connection.  now want to connect via a WLAN and cannot.  It connects to the router, but not through the gateway.  all other computers connect very well.

  Connection info says Uniidentified network

  Solved the problem by returning to the bottom of the network security to WEP

• When you create a parameter in a data model, which determines which object in the DataSet it will be used on?

  Hi team,

  I'm new to BI Publisher and is having a bit of a roadblock. I am trying to add parameters to a data set to show the records but that fall between a certain interval (between), I can't do this.

  I see the parameters in the xml view, but it has no effect on the data, he returned. Also, how would you get it replicate a between condition?

  Thank you and best regards,

  Shriddy

  You are on the latest version of BI EE, refer to what it gives an idea. http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/FMW/bi/BIP/bip11g/gettingstarted/gettingstarted.htm?print=preview#T3

• Best rendering parameters of the files that will be used in the PPr

  Z820, Win 7 HP, Adobe production suite CS6.

  I'm eager to make 'temporary' files that will be brought back right into legacy or placed in PrPro for final rendering for Youtube or Vimeo. I hope that by making components for comps that I'm not going to change, I can speed up the editing process, but she wondered if I could be implemented myself degrading images because of the multiple times between washing, so to speak.

  I wonder what the best rendering parameters choice is if I'll be crossing output another iteration or after effects or PrP before the final product?

  Comps are set at 1080 p, 29.97 FPS.

  Output is t H.264 @ 1080 p, 29.97 FPS.

  Jeff

  The concept to make some elements that are locked to be used later in your comp is called before rendering. It's actually a lot. If you display a file without loss (such as Quicktime with the PNG codec at high quality), it will be 0 loss of quality.

• VPN requirements, need help in selecting the right technology

  I need help choosing correct vpn technology to meet my needs.

  I have a 2801 router I will use for vpn sessions. I use 871 routers of the series for remote clients. The requirements that make it difficult for me to determine how to configure are:

  The IP WAN routers 871 will be dynamic, so I can't use lan to lan standard IPSEC configuration. The solution must allow the connection of any address.

  Remote sites will also have to pass traffic between remote sites. I need to do this, because this VPN will be used for IP phones and I want clients on remote sites to be able to call each other.

  Some of the solutions I've seen require the remote user enter a user name and password of the CLI on their 871 to bring up the tunnel. If it's possible I don't want it's an addiction.

  I am familiar with cisco routers and can usually do a config works if provided an example, but I don't know enough about the various VPN options to choose the right solution. Any help is greatly appreciated.

  Thank you

  If you need a spoke-to-spoke vpn connection as well, you can try DMVPN.

  http://www.Cisco.com/en/us/products/ps6658/prod_presentation_list.html

• Need to check delays in update of 1000 lines using the PL/SQL procedure.

  Hi all

  I'm new to PL/SQL. I need your help to build a procedure that executes the following statement and follows the time of update of 1000 rows. This is to check the performance of the database. I need to print the timestamp of start before the update and end timestamp after update. I need to do for the 1000 lines. The statement that will be used in the procedure is:

  SELECT

  'UPDATE XXAFL_MON_FACTS_F SET TASK_WID =' | NVL (TO_CHAR (TASK_WID), 'NULL') |', EXECUTION_PLAN_WID =' | NVL (TO_CHAR (EXECUTION_PLAN_WID), 'NULL').

  ', DETAILS_WID =' | NVL (TO_CHAR (DETAILS_WID), 'NULL') |', SOURCE_WID =' | NVL (TO_CHAR (SOURCE_WID), 'NULL') |', TARGET_WID = ' | NVL (TO_CHAR (TARGET_WID), 'NULL').

  ', RUN_STATUS_WID =' | NVL (TO_CHAR (RUN_STATUS_WID), 'NULL') |', SEQ_NUM =' | NVL (TO_CHAR (SEQ_NUM), 'NULL') |', NAME = "' | NVL (TO_CHAR (NAME), 'NULL').

  "', NO_POSITION =" ' | NVL (TO_CHAR (INSTANCE_NUM), e ') | " ', INSTANCE_NAME = "' | NVL (TO_CHAR (INSTANCE_NAME), 'NULL').

  "', TYPE_CD =" ' | NVL (TO_CHAR (TYPE_CD), e ') | " ', STATUS_CD = "' | NVL (TO_CHAR (STATUS_CD), e ') | " ', START_TS =' | NVL (TO_CHAR (START_TS), 'NULL').

  ', END_TS =' | NVL (TO_CHAR (END_TS), 'NULL') |', DURATION = ' | NVL (TO_CHAR (DURATION), 'NULL') |', STATUS_DESC = "' | NVL (TO_CHAR (STATUS_DESC), 'NULL').

  "', DBCONN_NAME =" ' | NVL (TO_CHAR (DBCONN_NAME), e ') | " ', SUCESS_ROWS =' | NVL (TO_CHAR (SUCESS_ROWS), 'NULL').

  ', FAILED_ROWS =' | NVL (TO_CHAR (FAILED_ROWS), 'NULL') |', ERROR_CODE = ' | NVL (TO_CHAR (ERROR_CODE), 'NULL') |', NUM_RETRIES =' | NVL (TO_CHAR (NUM_RETRIES), 'NULL').

  ', READ_THRUPUT =' | NVL (TO_CHAR (READ_THRUPUT), 'NULL') |', LAST_UPD = ' | NVL (TO_CHAR (LAST_UPD), 'NULL') |', RUN_STEP_WID = "' | NVL (TO_CHAR (RUN_STEP_WID), 'NULL').

  "', W_INSERT_DT = ' | NVL (TO_CHAR (W_INSERT_DT), 'NULL') |', W_UPDATE_DT = ' | NVL (TO_CHAR (W_UPDATE_DT), 'NULL').

  ', START_DATE_WID =' | NVL (TO_CHAR (START_DATE_WID), 'NULL') |', END_DATE_WID = ' | NVL (TO_CHAR (END_DATE_WID), 'NULL') |', START_TIME =' |

  NVL (TO_CHAR (START_TIME), 'NULL') |', END_TIME =' | NVL (TO_CHAR (END_TIME), 'NULL'). "WHERE INTEGRATION_ID ="' | INTEGRATION_ID | " « ; »  OF XXAFL_MON_FACTS_F;

  The above query creates instructions of update that must be executed 1000 times and the time required to update the 1000 lines should be followed.

  Thanks in advance!

  Code horribly wrong!

  Why this approach?

  Dynamic SQL is almost NEVER needed in PL/SQL. And if you think it's necessary and taking into account what is displayed as being problems here, you have a 99% chance of being wrong.

  This 1% where dynamic SQL is necessary, he will WITH bind variables to create shareable SQL, decrease memory requests, decrease the likelihood of a fragmented shared reel and decrease the burning CPU cycles on hard analysis.

  An example below. Your approach is the 1st. One that is slower than the correct approach to 37 (x_!) ...

  SQL> create table t ( n number );
  
  Table created.
  
  SQL>
  SQL> var ITERATIONS number;
  SQL> exec :ITERATIONS := 100000;
  
  PL/SQL procedure successfully completed.
  
  SQL>
  SQL>
  SQL> TIMING START "INSERTs using Hard Parsing"
  SQL> declare
    2          i      integer;
    3  begin
    4          for i in 1..:ITERATIONS
    5          loop
    6                  execute immediate 'insert into t values ('||i||')';
    7          end loop;
    8          commit;
    9  end;
  10  /
  
  PL/SQL procedure successfully completed.
  
  SQL> TIMING SHOW
  timing for: INSERTs using Hard Parsing
  Elapsed: 00:02:00.33
  SQL>
  SQL> TIMING START "INSERTs using Soft Parsing"
  SQL> declare
    2          i      integer;
    3  begin
    4          for i in 1..:ITERATIONS
    5          loop
    6                  execute immediate 'insert into t values ( :1 )' using i;
    7          end loop;
    8          commit;
    9  end;
  10  /
  
  PL/SQL procedure successfully completed.
  
  SQL> TIMING SHOW
  timing for: INSERTs using Soft Parsing
  Elapsed: 00:00:06.06
  SQL> drop table t;
  
  Table dropped.
  
  SQL> create table t( n number );
  
  Table created.
  
  SQL>
  SQL>
  SQL> TIMING START "INSERTs using a single parse and repeatable statement handle "
  SQL> declare
    2          i      integer;
    3  begin
    4          for i in 1..:ITERATIONS
    5          loop
    6                  insert into t values ( i );
    7          end loop;
    8          commit;
    9  end;
  10  /
  
  PL/SQL procedure successfully completed.
  
  SQL> TIMING SHOW
  timing for: INSERTs using a single parse and repeatable statement handle
  Elapsed: 00:00:04.81
  SQL>