Incomplete Passed this test in the LMS

Similar Questions

• CD player passes all tests but the computer does not start from cd player

  CD player passes all the tests, but the computer does not start from cd drive. entered the bios and it specifically indicate to boot from the cd drive. Windows 7 installation disc does not start. Win 7 disk works in another computer to start. Why is it not this cd player read the disc and from the win 7 installation process?

  I see this problem on systems having older IDE and SATA drives requiring firmware updates and assigned to the region 1 aka they boot from XP CD, but not DVD windows 7or media.

• How to access the information in the report of a pass/fail test?

  I'll call you a LabVIEW VIs of TestStand which are configured as ' pass/fail Tests. The result of the Boolean "PASS/FAIL" of LabVIEW indicator apparently are accessed through the variable RunState.SequenceFailed of TestStand. However, I can't find a similar TestStand variable that contains the information of 'Text of the report' of LabVIEW. Not such a variable exist, nor will it take to create a?

  Hi bmihura,

  The best approach would be to use direct information from the stage itself. You can get the text of the report of the RunState.Step.Result.Report text

  In this way, you go to the step text report directly.

  Alternatively, you can store the text of the report to a variable in the parameters of the step.

  I hope that gets things moving along to you!

  Kind regards

• Why the LMS reports a criterion for success of 'Unknown' for a quiz that I don't see?

  Hello

  I use 6 Captivate to create a course in which there are three components, a demo, a test and a trial. I have only configured the test click on boxes to "include in Quiz". Also, I put my preferences of quiz as shown below.

  So basically our client wants an incomplete-> Pass/Fail report with the chess game going on 80% (which I did in the section "Pass or fail" Quiz preferences)

  

  I test my results in the SCORM clouds and they are as follows:

  When I click through my test passing, SCORM Cloud reports

  Completion status: "complete."

  Success: "past."

  Note: "97.8%.

  However, when I take the test and try intentionally to fail, I get:

  Completion status: 'incomplete'.

  Success: 'unknown'.

  Note: '44,28%'.

  What I can't understand, why is "unknown"? Should not have been "failed"? So I created a small project a fake slide with six boxes. Each of them to be included in the quiz (so each box is 16.67%) value when clicked and set a pass mark of 80%. I tested on SCORM Cloud he omitted intentionally and got what I expected.

  

  Completion status: 'incomplete'.

  Success: 'failed'.

  Note: '44,28%'.

  So why this did not work in my main course? What could be causing the LMS did not know that I failed the Quiz and save the success as 'Unknown' field? Summer try this for a while now and can't understand this. Appreciate any kind of help that I can get here.

  Thank you

  Sean

  There is not a "State of success" in SCORM 1.2.

  There is really no way to know what your LMS uses to determine/display a "success" of failure.

  Captivate objective sets failed in this line, with the 'fail' which was held in the strSCORMStatus variable.

  SCORM_CallLMSSetValue ("cmi.objectives" + intObjectiveIndex + ".status", strSCORMStatus) & blnResult;

  This sets the objective status based on the lesson_status and shuod define the objective status to 'incomplete', so the lesson_status is "incomplete".

  I think that technically if the completion status is 'incomplete', it is impossible to know what would be successful because the LMS think that marked interactions were not yet complete.

• What are the variables system will report to the LMS for the completion of the course, when there is a test (developed with conditional actions manually).

  I developed a course where the learner must pass the test to complete the course in LMS.

  I developed a quiz (quiz developed using conditional actions) manual.

  Now I want my course should show in LMS completion status, only after the learner either in quiz.

  How do my report course to the LMS of completion criteria?

  I use 6 Captivate and LMS is CSOD.

  I tried to include in quiz option is not working for me... anyone have any ideas to fix this?

  Thanks in advance

  Have you checked that Panel Advanced Interaction, please? All of the marked objects that are indicated to be added to the total of the Quiz are part of all system Quizzing variables. Insert a slide to score in your project and check the result when previewing in the browser or after publication.

• Confusion about the incomplete-> pass/fail cp6

  Okay, so I have a little quiz in cp6.  I want my lms to display the pass or fail status.  He continues to show spent even if the quiz is definitely down.

  I use inquisiq and scorm1.2

  I have represenataion status set to incomplete-> pass/fail

  sussccess/performance of the user criteria. I also trield slide views or quiz in several different contexts. I can't show him failed.

  The quiz is set to once only.

  Help!  What I screwed up with these settings?  I'm so confused...

  Thank you

  Lori

  In SCORM 1.2, you have the choice of using the complete/incomplete state or success/failure.  In SCORM 2004, you can have two registered statutes.  So check with your administrator LMS to see if the option exists to put in place courses SCORM 2004.  If so, use it and set of Captivate options accordingly.

  Looks like you may have your currently defined parameters so that as long as the user is accessing content that they get marked as adopted.  What you want, it's that they not be transferred if they pass the test.

  Try to use the settings as shown here:

  

• A Telnet session can be passed 1 VI at the test bench

  Test and Lab View, each of my tests open a telnet session, runs a test, close the session and is then repeated in the next step but run a different test.  So I get a pass/fail for each step.

  Is it possible to open a telnet session in the format box test (using a VI created in lab mode) and move this telnet session to another VI in the main area of testbed.  (VI) test steps across would not open a session, saving time.

  Thanks to all who responded.  To solve my problem, I created a VI that opened a telnet connection.  I did that Vi the Telnet on a control that I traced on a connector.  I placed this VI in my SETTINGS teststand.  In teststand, I made the telnet on a variable FileGlobal (called Telnet_Connection).  Then, in the region of the hand of teststand, I place a VI that performs a test on the telnet with on opening a connection.  I did the Telnet in a control and it mapped to a connector in the VI.  TestStand I made the telnet in the same variable as the telnet on created in the Setup program, Telnet_Connection.  Run the test and it worked.  My biggest problem was not knowing not how to create a variable or pass a variable in Teststand.  Thanks again for your help.

• passed the test after the step failure

  Hello

  I have a stage with test of numerical limit.

  I checked in properties, under run Options, step failure causes the sequence

  But when I washed up on the market, the result of the test is passed.

  When I change the Actions Post - on is not going to the next step Goto cleanup

  then the result of the test is failed.

  I have two other stations where I limited digital test with the same properties, but here I don't have to go to cleanup for a failure result.

  I use TestStand 2013.

  Please help me, thanks

  / Magnus

  Magnus,

  Instead of setting RunState.SequenceFailed in your Expression after, try setting Step.Result.Status to this value instead. It worked on my machine.

  I hope that helps!

• Statement before the test score to LMS using Captivate 8

  Anyone know where I could find instructions on how to report pre-test scores to an LMS? I don't have the e-learning suite.

  Hmmm, your question was really different from my interpretation. You want to know what is the goal, the design of the front test?

  The pre-test design is for a specific purpose: allow the user to perform a previous test, in order to create a personalized navigation based on the pre-test score. This custom navigation is created using the pre-test action, that you can change with the button in the part of the Actions of the Group Quiz for slides before the test. There is a base in place, but you must change the slides to go to in situations of success/failure. You can also extend the conditional action with more than two branches based on the outcome of the score before the test. You will see that the system variable, I mentioned in my first reply is used in this action.

  On my pleading, the Adobe team said before the more variable test system after the first version (6?), to make it possible to create a true score slip to show the result to the user. I assumed that you already have my table updated with system variables in CP8, you will find the explanation of these variables of pre-test in the table.

  As you know SCORM requires that each course has only one Quiz, and that score is deferred. The pre-test was designed to produce a workflow easier to have such a "pre-test", but his score is not declared to the LMS (unless LMS accepts the values of the variables), only the score of the true quiz.

• CP can send a pass mark for the LMS when the user reaches a specific slide?

  I use CP 6.1 and I was wondering if there is a way I can set my parameters of reports to send a pass mark for the LMS when the user reaches a specific slide?

  

  I don't want to 'pass' to be determined by a Quiz. I want to be determined by slide views or the number of slides. I want a "pass mark" to pass to the LMS only when the user reaches a SPECIFIC slide. Is this possible?

  Not with the views of the slide. It would not be acceptable to have an object on this slide, the user should click on? And then require a score equal to one set to this object (button, button shape, click box or even a text entry box)?

• How to pass a pci device to vm? is this possible with the merger?

  I'd like spend peripheral scary pci directly to a virtual machine. is this possible with the merger?

  as long as im asking a pony on a mac with intel and nvidia graphics, is possible to map nvidia to a virtual machine and let the host with intel one? If Yes, is it possible for a virtual machine running os x?

  Hello

  No, you can't.

  The only VMware product that can pass through the PCIe card is vSphere.

  vSphere work on some apple hardware, but it is a bare metal hypervisor, you cannot use OS X on the machine itself locally then (only remote via another computer that connects to the server for vSphere)

  --
  Wil

• I'm following the steps described in the version beta to build the application of 'Launch' test, but the tool of signed digital app has no ios tab when I go to the for use. Is this a bug or am I missing something?

  I'm following the steps described in the version beta to build the application of 'Launch' test, but the tool of signed digital app has no ios tab when I go to the for use. Is this a bug or am I missing something?

  Note that iOS signature is only available on Mac. If you're on a Windows machine, you won't see the iOS tab.

  Neil

• When my Captivate project is published on my LMS, course opens a new window.  You are able to copy the URL of this window and access the course without logging into the LMS.  How can I avoid this?

  When my Captivate project is published on my LMS, course opens a new window.  You are able to copy the URL of this window and access the course without logging into the LMS.  How can I avoid this?

  Return to your LMS administrator and ask them why they have not put in place more firmly. The scenario you mention should not occur if the LMS is well attached.

  Some LMS have the contents of the course are in a folder outside the web space so that users can access the course URL directly.  For example, Moodle t - it this way and then shot the course content in a temporary folder when the learner clicks on the link ask a module.  No matter how your LMS is supposed to do, it is currently not configured correctly.

• I received an email from "mail administrator", requesting the user name, email address and password? I can pass this on you?

  I copied the mail I received. I strongly suspect that it is an example of fishing

  [email protected]
  [email protected]
  beneficiaries non -:;
  We are sorry for the inconvenience, we will spend
  through. We have a problem with our database due to our
  recent upgrade and anti spam solution, please we need to torectify this problem before the next 48 hours.

  you will not be able to send or receive mail.
  

  To answer this message fill the information below.

  Username:
  Email Address:
  Password:
  

  Thank you

  2015 Web Technical Service.
  

  Well, yes it is almost certainly a parody.

  If he seems to be claiming to be a legitimate contact, then check if the company is usurped has an address to which you can send it. Most of the banks and similar have a contact address to which you can send phishing e-mails; copy of their help to understand what attacks are returned to their customers.

  Mozilla offers no support for dealing with phishing and other scams. Thunderbird is your e-mail client; It just shows you what other people have sent to you. It is not be responsible, or influence the content of the messages.

• Cannot download Photo Story 3 and receive the message error "this version of the program is no longer supported.

  Original title: Why the * (& % $% if I can't download Photo Story 3)

  Microsoft takes me in a big circle, when I try to download Photo Story 3. After that I selected to download, I am taken to a screen where I need to validate my windows. So I have to download a program that is supposed to work on my PC to validate my windows. When I run the validation program, I get a message that this version of the program is no longer supported.

  I will not go into the tale to be taken through 3 or 4 sites only for the back where I started.

  Help, please!

  How can I validate my XP with SP 3 Windows and download PhotoStory3? (I installed today 3 SP.)

  Hello

  I suggest you to follow the steps and check if it helps.
  (a) restart the computer.
  (b) before windows logo appears, press F8repeatedly.
  (c) in the Advanced startup option, select Safe Mode.
  (d) log in to Windows with an administrator account.
  (e) click Start , and then click on work station.
  (f) in the Tools menu, click Folder Options.
  (g) in the tab view, uncheck the option to use a simple file (recommended) sharing the bottom of the list.
  (h) click OK.
  (i) click on the tab display.
  (j) slot hidden files and folders, put the check mark for display the hidden files and folders.
  (k) click to clear the Hide extensions for known file types check box, and then click on OK.
  (l) we will find the nameddata.dat file in the following folder:
  C:\Documents and Settings\All Users Application data authentic
  m file) right-click the data.dat , and then click on Properties.
  (n) click on the tab security.
  (o) click on Advanced.
  (p) on the name tab, please check if everyone is listed. If so, click on the Exit button and put on check full controlbox.
  (q) If everyone is not listed, please click on the Add button and enter the name of everyone (without the quotes).
  (r) press entrance to the keyboard and select full control in the context menu, and then click OK.
  (s) Please, click OK to accept the changes.
  Now, restart the computer and see if you can pass the verification test and install Photo Story3.
  I hope this information helps!