"Inconsistency in the database of the Installer"

Similar Questions

• Try to install purchased box.  Alls well until the last window when this message appears. INCONSISTENCY IN THE DATABASE OF THE INSTALLER. RESTART YOUR COMPUTER AND INSTALL IT AGAIN. Fact as stated several times and redisplays but same message?

  Try to install purchased box.  Alls well until the last window when this message appears. INCONSISTENCY IN THE DATABASE OF THE INSTALLER. RESTART YOUR COMPUTER AND INSTALL IT AGAIN. Fact as stated several times and redisplays but same message?

  Run the cleanup tool and manually delete the caps.db file.

  Important directories | Error postal codes of Mylenium

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  When you reinstall, make sure that you run with user privileges sufficient and external tools like virus scanners do not interfere. This is why you have the question in the first place.

  Mylenium

• Inconsistency in the error of database Installer on to OS 10.9.4 CS5.5

  Hello

  Try to put CS5.5 on a MacBook Pro with OS 10.9.4. On the last screen of the "Installation State", a warning triangle with your installation has encountered any errors at the top. In the box it says "inconsistency in the database of the installer. Please restart your computer and install again. "Tried several times now. Any ideas?

  of mylenium,.

  Manually remove the caps.db in the folder selections. Just run the script cleaner resolcve this issue does, as in fact a completely different entry in the database can be the cause and do not appear in the tool at all...

  Important directories

• Inconsistency in the database of the installer. Please restart your computer and reinstall?

  Impossible to reinstall Photoshop elements 11 after getting the new hard drive. I get the following message:

  Inconsistency in the database of the installer. Restart your computer and install again.

  First 11 installed OK?

  How to do this?

  Remove your corks to database, http://helpx.adobe.com/creative-suite/kb/error-installer-database-corrupt-install-1.html

• Setup error CS6, inconsistency in the database of the installer, code output 15

  Hello

  I am trying to install Photoshop CS6 on my new Mac.

  After asking 2%, I get the error message "Setup error CS6, inconsistency in the database of the installer."

  The file of summary shows error code fatal exit 15 and 0 errors/errors/warnings.

  I've seen the other threads in this forum with the same error and I tried the only suggestions here, but so far no luck.

  My Photoshop CS6 is a version downloaded from the Adobe Web page. Everything works fine until the installation begins.

  These are the actions that I have tried:

  1. restart and reinstall

  2 cleaning adobe tool (no result because there was nothing to clean up)

  3. I have disabled the software from my old computer

  4 tried to install it in safe mode

  5. I was contact Adobe support, did not get much support at all. After awhile, I was told to open a discussion in this forum.

  Please help... spent two days on this already.

  Jeff,

  Finally... The problem is resolved.

  I contacted chat support and the person I spoke to connected to my computer and only could find a corrupt file that caused the whole issue.

  Once the file has been deleted, installation could be completed without any problems.

  Thank you for your support.

• inconsistency in the master collection Installer database cs6

  Hello

  http://www.YouTube.com/watch?v=iw_DXFp-_hw

  I download the track (master collectio) when I try to install the collection of master he give this "inconsistency in the database of the program installation please restart your computer and install again the sum of the error" even I have restart my pc several times but is always the same question.

  How can I solve this problem?

  Thank you

  The solution proposed in the link below, it may be helpful to follow: -.

  http://helpx.Adobe.com/Creative-Suite/KB/exit-code-15-Installing-CCM.html

• Inconsistency in the database of the installer. Restart your computer and install again.

  Hello

  I get the error above in step finish of the installation process. I have a PS CS5 update, try to install the new macbook. I read the other posts saying to delete the caps.db file in the library. I do not have this file, but have a record of CAPS. Don't know what to do and I don't want to hack following the installation of the files willy nilly. Adobe offers no help.

  Any ideas?

  Kind regards

  These are help pages for cs3 and cs4 for this error.  see if you can apply to your situation.

  CS3: http://helpx.adobe.com/creative-suite/kb/error-installer-database-corrupt-install-1.html

  CS4: https://helpx.adobe.com/creative-suite/kb/error-installer-database-corrupt-install.html

• installation of CS5.5.  My Installer encountered errors and it says inconsistency in the database of the installer.

  He is said to restart the computer and install again... done three times and got the same message

  remove your hats, database error «...» The Installer database is corrupt... "When you install Adobe Creative Suite 3 products

• The message says the inconsistency in the data base of the installer and the installation fails. The summary of errors not display any errors. How to install LR?

  Message on the notification window "Inconsistency in the database of the installation program"and the installation fails. The summary of errors not display any errors. How LR to install?

  HI Pauld48784098,

  It will help us solve your problem if you can provide additional information. What version of Lightroom are you trying to install and what is your OS?

  In the meantime, this discussion forum, in which a user has experienced a similar problem, can help: "Inconsistency in the database of the installation program".

  Best,

  Del

• My SSD with a version of Dreamweaver CS6 running crashed. Now a new SSD is installed and every time I try to reinstall DW CS6 error "inconsistency in the database Setup" (in German terms) occurs. I tried to delete everything about t

  My SSD with a version of Dreamweaver CS6 running crashed. Now a new SSD is installed and every time I try to reinstall DW CS6 error "inconsistency in the database Setup" (in German terms) occurs. I tried to delete everything about CS6, rebootet and so forth--nothing worked. Two hours later, I tried to install DW 5.5 - that worked. Then I tried again to install 6.0 - without success. Can anyone help?

  Thank you for your response. I could not find caps.db.

  Meanwhile, I solved the problem as follows: I searched "dreamweaver" everywhere one deleted all that I could find. Then I googled "CS6" and did the same. I guess that there are around 20 or more places where I deleted files or directories. Suddenly, installation has not prevented, to 2%, what he has always done before and the installation was a success :-) It cost me more than 4 hours to understand this, and I have found a trick somewhere really help. Adobe itself I could not contact because I couldn't find an email address or a phone number - poor support for such expensive software. For luck, I didn't deliver something just in time. Missing a useful support, it's an attitude really poor, poor Adobe... I think that I do not buy not more products Adobe - it could cost too much of my time... :-(

• error during the installation of SP3 for windows xp-"cannot read or write to database"

  I have windows xp and when I try to install sp3 I get a message saying "cannot read or write from database" and stops the installation.

  How long the machine was not installed SP3?
  (It could be infested/infected/etc.)

  In any case, what I suggest is to prepare the machine for the update...

  • Steps to take before you install Windows XP Service Pack 3
  • Windows XP SP3 - read all the prerequisites for a successful installation

  Chancing some repetative tasks... Maybe just do the following:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * SHOULD * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Download here all the SP3 Setup file: Windows XP Service Pack 3 Package of Network Installation for developers and information technology professionals and save it to the Office of the administrator of the user account on the computer in question.

  Reset.

  Double-click the installation file downloaded in step above and follow the instructions.

• How to upgrade the Client installation from the Admin 12.1.0.2 to the most recent Group of patches available for the installation of the database.

  Hello

  We have sql client version 12.1.0.2 which has some issues in terms of sqlloader does not. This has been fixed by the patches oracle 20315685 group. Can someone help us understand how to install this group of patches on the installation of the Client. How to get on the client only the upgrade from group fixes provided by oracle.20315685 in this case.

  Concerning

  Patch 20315685 is WINDOWS BUNDLE PATCH 12.1DB. 0.2.2

  It is a bundle patch is developed to fix bugs related to 12.1.0.2.0 version on windows platform.

  This patch is common for the database server and Client.

  To apply the patch

  (1) services the customer stop like sqlplus, sqlloader

  (2) unzip the downloaded patch

  (3) cd

  (4) set as % ORACLE_HOME %path% environment variable

  (5) %ORACLE_HOME%/OPatch/opatch apply

  It will apply the necessary corrections.

• The Installer database is corrupt. Contact the costomer service. How can I contact them? DWCS4

  My computer crashed and I need to re - install Dreanweaver CS4.

  After I click on install I get the message: the Installer database is corrupt. Please contact customer service.

  How can I contact them and maybe get a new drive?

  Shortly after he was released and had to reinstall once, I bought the program.

  Downloads of older products of Creative Suite.  Activate it with your serial number.

  http://helpx.Adobe.com/download-install.html

• The customer need to oracle database in the installation of the EPM FDM

  Hi all

  I want to install EPM11.1.2.2 products and on one server I install FDM. I checked the condition sine qua non of the installation of FDM and according to the guidelines of this customer database Oracle 32-bit and 64-bit client is necessary.

  Server is Windows 2008 64 bit and already Oracle database 11g is installed.

  I have reg queries following it.

  1. If the Oracle database is installed on the same server, do I need to install both clients of the database as well?

  2. If so, I am trying to install oracle database 32-bit client but the screen is endangered shows no newspaper or mistake, but at the same time 64-bit client is installing successfully?

  3. I have not installed ODAC, what is the significance of this facility, and what I need to install the same?

  Help, please.

  Thank you

  Hi all

  Got the solution to the problem of the 32-bit client installation on the same machine where oracle 64-bit database or oracle customer base 64 is already installed.

  I took knowledge oracle support 1292785.1 document IDs and found the solution.

  Thank you for all your help.

• I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear

  I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!

  63f5a1a9-ECA2-4300-B10f-22cd940a8726 wrote:

  I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!

  It is a symptom of textbooks classic does not have read and followed the original instructions to prepare the downloaded files.  You should have two files zip files.  They both must be decompressed in the same directory.  If you unzip using Windows graphic interface - in right click on the name of the file and selecting "extract all...". "the default behavior will be to create a directory, the same name as the zip file and extract in it.  Thus, file_1_of_2 pulls in directory_1_of_2 and file_2_of_2 extracted in directory_2_of_2.  You must override this stupid behavior by default and specify the directory yourself.  And specify the SAME directory for both files.

  Or just go to a command prompt, change directories to the directory where the two zip files are located and deliver "unzip " and "unzip ", and they will both be properly unpack to a directory named "database".