Incorrect date in the registration of the guarantee

Similar Questions

• Incorrect date in the field Explorer update

  I bought a new flash drive to use for backups. I created a new folder, backup files and copied and saved to My Documents. later I noticed the flash player was two files, backup files, I had created, and the other call. ReadyDLNA. The update indicated to explore for. ReadyDLNA was 12/31/1999, as well as the date on my newly created backup files was 02/01/2000. What caused the update to be incorrect? I've been bitten by the bug? Everyone knows about this problem? What sets the date for the update in the Explorer? Is it possible to fix dates? Thank you.

  I was really hoping to be able to change the date, but I guess that you're telling me that there is no way to do. Right?

  No, unless you always want to use a 3rd party utility.

  With the tools you suggested, it would be possible to partition the flash player without destroying my backup file and then format the new partition to NTFS, or I just need to reformat the entire flash drive and lose my backup?

  If your flash drive is big enough you just "Shrink" / resize the existing partition, create a new partition and format it.

  Why do you have NTFS? - More robust than FAT32

  J W Stuart: http://www.pagestart.com

• Incorrect date on the screen of TP phone sessions

  Hello

  As you know, the sessions of TP phone screen shows forthcoming meetings. the clock shows properly at the top left, as 18:19 07/17/11, but in the second line, the date of scheduled meeting is not today, as 23/05/06

  Any help will be much approciated

  Fix... While the phone may have the right date because he can pick up the date / actual time of the SIP messages it receives, the planned meeting information gets fed to the screen of the phone of the codec. So, if there is no set of NTP server, the codec may have an incorrect date and it will show the meetings for that day, even if the phone clock shows the correct date.

• PhotoSmart e-all-in-one B210a: Incorrect Date for the installation of ink

  I installed new ink cartridges, then print a diagnostic report. The report said that I had installed the cartridges on 15/04/2016, but the date was actually 21/04/2016.  Well, my printer is five days late, but I do not see where to change the date on the calendar on the printer. I logged into the IP address of the printer, but there is nowhere to change the date, either. Clock and calendar on the computer are correct.

  Hi Caesar1948,

  You are welcome!

  It seems not be an option in the settings to change the date and time. However, we can try a semi full reset, which will restore the printer to its factory settings, if you wish. I sent you instructions in a private message. If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope it's useful!

• Adobe Elements 9, incorrect date in the calendar project

  After selecting a start date of January 2011, my project shows January 2010 - December 2010.

  I printed a calendar page just in case it was an example of the view of the project but in January 2010 print calendar.

  My system for computer date indicates the correct date.

  Can someone help me?     I can't find anything in the preferences to change the date in the title of the editor or organizer.   Maybe

  I missed it.    Also, it would be nice if I can change the date the project information, so I can't do it again.

  Thank you

  Select 2012 and get 2011.

• idac6 of the incorrect data returned by winrm commands

  Issue commands to idrac winrm returns incorrect data or no data. There are a lot of servers that do not work, but about 5 x the amount which work very well on the same FW revisions. The question is about R610 and R410.

  Pretty standard FW level:
  IDRAC = 1.90
  LCC = 1.5.5.27

  The following command returns incorrect data that are constant in all those who are broken. To start the model isn't T710 and the ChassisServiceTag does not match the ServiceTag as it does normally if the system is not a blade. All incorrect data displays the model under T710 and the ChassisServiceTag as JDTR5L1. They also all what they have only one dimm installed. BIOS version is incorrect, but also seems to be incorrect on which ones work.

  NOTE: Replace with the IP or name of the idrac. Change password if it is not the default value of calvin.

  WinRM g http://schemas.dell.com/wbem/wscim/1/cim-schema/2/DCIM_SystemView?__cimnamespace=root/dcim+InstanceID=System.Embedded.1 - u: root - p: calvin - r: https: / //wsman - SkipCNcheck - SkipCAcheck-encoding: utf - 8 - has: basic

  Data:

  AssetTag
  BIOSReleaseDate = 03/05/2010
  BIOSVersionString = 2.1.3
  BaseBoardChassisSlot = NA
  BladeGeometry = 4
  ChassisName = the main system chassis
  ChassisServiceTag = JDTR5L1
  ChassisSystemHeight = 5
  ExpressServiceCode = DELETED
  FQDD = System.Embedded.1
  Host name = DELETED
  InstanceID = System.Embedded.1
  LastSystemInventoryTime = unknown
  LastUpdateTime = 20100310170819.000000 + 000
  LifecycleControllerVersion = 1.5.5
  Manufacturer is Dell Inc.
  MaxCPUSockets = 2
  MaxDIMMSlots = 18
  MaxPCIeSlots = 1
  MemoryOperationMode = OptimizerMode
  Model = PowerEdge T710
  PlatformGUID = 314e4d4f-c0b4-3280-4610-00324c4c4544
  PopulatedCPUSockets = 0
  PopulatedDIMMSlots = 1
  PopulatedPCIeSlots = 0
  PowerState = 2
  PrimaryStatus = 1
  ServiceTag = DELETED
  SysMemErrorMethodology = 6
  SysMemFailOverState = NotInUse
  SysMemLocation = 3
  SysMemPrimaryStatus = 0
  SysMemTotalSize = 512
  SystemID = 652
  SystemRevision = 1

  I tried "racadm racreset hard" without success. Next step is to be able to drain. After that it's default settings. After it's LC repair which seems to solve many questions randomly.

  I opened a case of dell already but would like to know if anyone ever seen this problem?

  Thanks for any help.

  This allows to CSIOR fixed the problem.

  Does anyone know a simple way to update the setting on 11 gen/idrac6 without doing it manually during a restart?

  I looked at using the following and do not see anything:
  omconfig
  racadm
  syscfg

  I think that this can be done through management to idrac, but the process seems mean.

• Date on the print cartridges - it is the production date or the expiration date?

  Date on the print cartridges - it is the production date or the expiration date?

  15 HP or HP 78 cartridges.

  15 and 78 cartridges do not expire in the sense that they will not be able to print after a certain date.  The date printed on the body of the cell is the expiry date of the guarantee.  This date is six months after the "install by" printed on the packaging of the cartridge comes and is two years after the date of manufacture.  See this page for more details.

• Cannot reset the dates of the digitized photos

  Can anyone help?

  After I search for old photos in the Organizer in Photoshop Elements 6, I have always change the date of the photo to the effective date or year where she was taken. (Edit/set Time/Set Date and time)

  Incredibly frustrating, is that for each photo, if I type in the year (1955), the screen set the Date and time always record like a year earlier (1954). (I have type the correct data, and then close the form.) If I return to the screen, I discover he's changed incorrect data.) The same incorrect year appears in the EXIF metadata saved with the photo.

  If I type in the year and month (for example, December 1965), the Set Date display always will record it as a month early (November). Yet once, the incorrect month appears in the EXIF data.

  If I type in the year, month and day (November 16, 1983), it will be saved as a day earlier (15 Nov).

  ONLY if I specify the TIME the photo was taken (in addition to the day, month and year) it will record correctly. But of course with most of the old photos, the time (and even the day and month) are often not known.

  Does anyone have an idea what is happening here? It drives me crazy.

  Thank you very much.

  Don

  PS: Is it possible to gang - write Notes to photos. I often put something in the section Notes under properties a photo in the Organizer, but I see no way of putting the same note with several photos: I end up having laboriously copy the same note in each photo, one at a time.

  Sorry, I didn't explain that very clearly, I'll try again.

  The bug to set the Date and time is not prevent you enter the date you want is saved in the catalog.

  Whenever you call Edit > set the Date and time and together a date and time, even if you set some unknown fields, he correctly recorded in the catalog fields date and time, you see in the command window.  If you call adjust the Date and time on a photo that has already been defined to have so many unknown areas, then a bug causes the date fields in the command window to be incorrectly pre-filled.  However, if you then change these fields to the correct values and then on OK, they get properly registered in the catalog.

  For example, suppose that you analyze a file this morning.  The time will be 19/12/2009-08:21.  You then call adjust the Date and time and assign to the year 1970, month of May and the days to '? (and the time will be automatically set to unknown).   And then you click OK.  The date in the catalogue will be 5/1970 (with the day and unknown time). You call then adjust the Date and time again, and the year is already indicated in the window command in 1970, but the month is incorrectly pre-filled-APR (this is the bug).  If you click Cancel, the date in the catalogue remains unchanged at 5/1970.  If instead you change the month in May and then click OK, the command window, the date in the rest to 5/1970 catalogue.  Or if you change the year 1972 and the month of July, and then click OK< the="" date="" in="" the="" catalog="" will="" get="" changed="" to="">

• Problems with the registration of the guarantee for my Satellite A200

  I tried to sign up for my Satellite A200 laptop computer online and it did not work. I then had to send info and proof of purchase for Toshiba and heard nothing yet.
  Emailed Toshiba and heard nothing yet. Number 117 of what laptop Toshiba receipt for support and services. It is what makes me look to buy a Toshiba.

  What service? What support? All I want to do is register my warranty. Is someone there?

  Hello

  I have 2 different Toshiba notebooks and I could save the guarantee of all my books!
  These two laptops are European model Toshiba and I could register the warranty on Toshiba's European support page!

  If you have any problems with your registration, then contact the ASP in your country and ask for help. If they have not responded until now then contact guys.

  I put t know what's wrong in your case, but my recording of security went well and it was not a problem!

  Then contact the guy and ask for help! It cannot be that difficult.

  Good bye

• A problem with the registration of the guarantee

  IV ' e bought a Satellite A500-132 yesterday and entered into the guarantee and no metter what warranty as stated in the booklet.
  But the Tempro shows BSW still on the computer.

  Do I need to register again?

  Thank you.

  Hello

  You can check the status of your warranty on the Toshiba warranty registration page.
  http://EU.computers.Toshiba-Europe.com/-> download-> Standard warranty & support-> registration

  Here, you have to choose the country. Then * apply now * then * details lookup.* record

  There you should find the details of your warranty.

• The vi below opens a new data file every time new data of the visa arrived. I only want a single file of data for registration period!

  The vi below opens a new data file every time new data of the visa arrived. I only want a single file of data for registration period!

  Can someone bring me (Labview is new to me) in the right direction?

  John

  See attached the amendment. I made a change to my suggestions and possess the top-level VI for the null refnum. See if it makes sense.

• Cannot save the incorrect date format

  I keep trying to save my computer... tells me incorrect date format?

  I had the same problem and ended up going through the online chat.  I guess there is a problem with the site, but they managed to sign up to my computer via chat.  Hope that helps

• Incorrect score from the LMS registration

  Our Organization is using SuccessFactors LMS to deliver e-learning courses. We are currently converting our HTML5 courses and are having problems with the LMS record the score incorrectly. We don't experience these same issues with courses published in flash.

  I created a course with question 1 quiz (10 points) - when I tested it in the LMS answering all the questions correctly, he recorded as complete with a score of 100 (SuccessFactors records the percentage scored rather than points).

  Then, I created a course with 5 questions quiz (50 points) - when I tested it in the LMS answering all questions correctly it registers as full, but with a score of 80. We cannot work where tire this partition, it is does not concern the number of percentage points.

  Courses have been built in Captivate 9, published in HTML5 and uses the parameters for the quiz:

  

  

  

  Maybe you could try to send the score ONCE instead of rattling of the SGA each slide.

  There is an option in the Quiz > Reporting screen to change the SCORM model called something like SendDataAtEnd. It sends only the score to the LMS once for each quiz, to the and.  It is perhaps interesting to see if SuccessFactors has this issue, because Captivate continues to send this data all the time.

  I'm clutching at straws here because this LMS does NOT Act that way.

• When I export the report to EXCEL files and filter the data, it will display incorrect data

  Hi experts,
  In OBIEE 11.1.1.6, when I export the report to EXCEL file and open this file to view all the data, it is correct.
  However, as the amount of data is so, so I add filter for each column (click on the sorting-> filter filter)
  When I select data in the filters, I'm afraid that I find the value of 'White' in the last line in the filter area, but in the table, there no null data. Why? Are you facing the same issue?
  Secondly, when I select a value, it will generate a data line.
  
  For example:
  2008 - Region1
  -The region.2
  -Elle3
  2009 - Region1
  -The region.2
  -Elle3
  
  
  When I select 2008 data in EXCEL, it will display unexpected data, as below:
  2008 - Region1

  Exactly... If you export to the format you will not face question of null data or incorrect when filtered.

  Kind regards
  DpKa

• How to insert deliberately incorrect data in a table for the test?

  Good morning (or afternoon you BluShadow) :),.
  
  I tried my hand to solve the problem that is mentioned in this thread
  
  Invalid number exception
  
  where the OP has incorrect data in a numeric field.
  
  When I tried to create a test case (which requires the insertion of incorrect data in a numeric field), Oracle fought me teeth and nails and won. I could not put incorrect data in a numeric field.
  
  Question is: How do we convince Oracle to allow me to "ZZZ" in a numeric field?
  
  By the way, what I was trying to solve the problem in the above thread, was to throw the digital field with incorrect data in a string type (Char (20), for instance) and then inspect the string to determine if it is a valid number.
  
  This approach has the potential if Oracle will not validate the contents of the field before castant. If that's the case then it will not work. That of what I tried to test but could not get the test data with.
  
  Thank you for your help,
  
  John.

  Question is: How do we convince Oracle to allow me to "ZZZ" in a numeric field?

  You can not.

  I look more deeply in the other thread that you mentioned, but this is probably a question like this:

  Connected to Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 
  
  SQL> create table table1 (
    2   num number(5),
    3   des1 varchar2(10)
    4  );
  
  Table created
  SQL> create table table2 (
    2   num varchar2(5),
    3   des2 varchar2(10)
    4  );
  
  Table created
  SQL> insert into table1 values(1, 'desc1');
  
  1 row inserted
  SQL> insert into table1 values(2, 'desc2');
  
  1 row inserted
  SQL> insert into table2 values('1', 'desc1');
  
  1 row inserted
  SQL> insert into table2 values('2', 'desc2');
  
  1 row inserted
  SQL> insert into table2 values('A', 'desc3');
  
  1 row inserted
  
  SQL> select *
    2  from table1 t1
    3       join table2 t2 on t2.num = t1.num
    4  ;
  
  select *
  from table1 t1
       join table2 t2 on t2.num = t1.num
  
  ORA-01722: Nombre non valide
  
  SQL> select *
    2  from table1 t1
    3       join table2 t2 on t2.num = to_char(t1.num)
    4  ;
  
     NUM DES1       NUM   DES2
  ------ ---------- ----- ----------
       1 desc1      1     desc1
       2 desc2      2     desc2
   
  

  We can see what is happening behind the scene by running a plan to explain:

  SQL> explain plan for
    2  select *
    3  from table1 t1
    4       join table2 t2 on t2.num = t1.num
    5  ;
  
  Explained
  
  SQL> select * from table(dbms_xplan.display);
  
  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------
  Plan hash value: 4277839568
  -----------------------------------------------------------------------------
  | Id  | Operation          | Name   | Rows  | Bytes | Cost (%CPU)| Time     |
  -----------------------------------------------------------------------------
  |   0 | SELECT STATEMENT   |        |     3 |    93 |     7  (15)| 00:00:01 |
  |*  1 |  HASH JOIN         |        |     3 |    93 |     7  (15)| 00:00:01 |
  |   2 |   TABLE ACCESS FULL| TABLE1 |     2 |    40 |     3   (0)| 00:00:01 |
  |   3 |   TABLE ACCESS FULL| TABLE2 |     3 |    33 |     3   (0)| 00:00:01 |
  -----------------------------------------------------------------------------
  Predicate Information (identified by operation id):
  ---------------------------------------------------
     1 - access("T1"."NUM"=TO_NUMBER("T2"."NUM"))
  Note
  -----
     - dynamic sampling used for this statement
  
  19 rows selected
   
  

  The predicate of access actually includes a TO_NUMBER, which of course not on NUM = "A".

  Published by: odie_63 on 24 July. 2010 12:39