Incorrect display of multi-part MIME message
I'm not critical but annoying problems.
My problem is similar to:
https://support.Mozilla.org/en-us/questions/992656?ESAB=a & As = AAQ
I have a single sender that can't be good attachment inline Mime email. What I've found, is that the order of mime parts seems to be important. In my case, the content of "HTML" is first listed in the message and the content of 'text' is the second. In this case, the 'text' is the part of the body that appears.
I have access to the source message. Simply, I reversed the order of the body parts in the message from the source, then the HTML version is displayed.
I installed the addon https://support.mozilla.org/en-US/kb/viewing-all-body-parts
I am able to see the two pieces when I put the correct settings.
My questions seem to be, (why) care Thunderbird what order are the parts of the body? If I choose "html" view original, thunderbird should not view the HTML code if it exists?
I can post the message source if you think this will help. However as I said, simply re - order the parts of the body, I get the HTML code when it is the part of the body of 2nd / last.
It is standard practice for the parts of the body as being HTML text.
I think the RFC explains the situation well enough
http://www.w3.org/Protocols/RFC1341/7_2_Multipart.html
To quote
As a very simple example, the following multipart message has two parts, both of them plain text, one of them explicitly typed and one of them implicitly typed:
From: Nathaniel Borenstein <[email protected]> To: Ned Freed <[email protected]> Subject: Sample message MIME-Version: 1.0 Content-type: multipart/mixed; boundary="simple boundary"
This is the preamble. It is to be ignored, though it is a handy place for mail composers to include an explanatory note to non-MIME compliant readers. --simple boundary
This is implicitly typed plain ASCII text. It does NOT end with a linebreak. --simple boundary Content-type: text/plain; charset=us-ascii
This is explicitly typed plain ASCII text. It DOES end with a linebreak.
--simple boundary-- This is the epilogue. It is also to be ignored.
The use of a content of Type multipart in a part of the body in another multipart entity is explicitly allowed. In this case, for obvious reasons, it takes to make sure that each entity several nested part must use a different delimiter. See Appendix C for an example of entities nested parts.
The use of the Content Type multipart with only a single body part may be useful in some contexts, and it is explicitly allowed.
Tags: Thunderbird
Similar Questions
-
gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the start of the battery. This happens on macbook pro retina 13 inches
When I try to startup macbook pro retina in battery mode, it will fail to start showing low battery level and an indicator to recharge the battery. It does not start on battery. When I then connect via the power cable at startup (and check the battery level), monitor of battery in the menu bar indicates that the battery is charged to the top.
It gets really frustrating and remove my ability to use the macbook pro retina as a truly portable device...
Appreciate any help on this
Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support
-
My I Phone 6 s incorrect display of battery percentage? everyone knows the same problem?
My I Phone 6 s incorrect display of battery percentage? everyone knows the same problem?
Hello dipudivakar,
Thank you for using communities Support from Apple!
From your post, I understand that your iPhone displays a percentage of the battery which is incorrect. To resolve this situation, I would first of all turn off the option to display the percentage of the battery on your iPhone. If you need information about how to disable this feature, the following article explains this process.
Display the percentage of the battery on your iPhone or iPad - Apple Support
After you have enabled this feature, please reboot your iPhone by following the instructions in the next section.
Restart your iPhone, iPad or iPod touch - Apple Support
Once finished, restart, enable the option to redisplay the percentage of your battery and test the question.
See you soon!
-
Info sendor is no longer displayed without clicking on each message individually.
Original title: Correction of the e-mail?
Running Vista on my HP Pavilion PC. Incoming emails always displayed with info sender/subject, time, date etc. Must have accidentally triggered something via
keyboard or slider... Info sendor is no longer displayed without clicking on each message individually. So far, can not know how to fix... Any suggestions?
Thank you!
Dave
Hello1. What do you use to send and receive email - an email client or a web site based on e-mail program?
2. If it is an email based on the web program-do you use the Internet Explorer browser to access e-mail? If so what version?Answer for you help the better.Alternatively, you can follow the below mentioned article:
Suggestions for a question on the help forums
http://support.Microsoft.com/kb/555375 -
How to calculate the height of LabelField when it displays in multi lines
Hello friends,
We use LabelField.getPrefereredHeight () to calculate the height of the label field. But he returned the same value when it is displayed online singel or multi line.
Please help me for differing from the height of the label while displaying field multi-line and single-line
Thank you very much in advance
If the code is simple, then you might want to go ahead and post it. I can't really speculate on exactly the problem in this case unless I see code. It doesn't sound like you should not show the width and height of your Manager 1 however. Here is an example of a sublayout of one of my managers:
protected void sublayout(int width, int height) { int numFields = getFieldCount(); int availableHeight = height; int totalHeight = 0; for (int i = 0; i < numFields; i++) { Field field = getField(i); layoutChild(field, width, availableHeight); availableHeight -= field.getHeight; totalHeight += field.getHeight(); } setExtent(width, totalHeight); }
This code is educating the Manager to use the full width so much to her and didn't use as much height as it needs (drunk on her children and adding up their respective Heights). I don't know if this helps, but if you have any other questions please do not hesitate to post the code and we'll see what happens.
-
Hi Ron,
I need to disable the Add button again in the CSS tab on specification of the trade while displaying the Notification number GTIN message duplicate.
If it does not duplicate notification displayed GTIN message not necessary to disable the Add button again in the CSS tab. Please see the screen shot for more information.
You said same thing as below mentioned in bold.
2. you can lock whole sectors, such as the CSS section, you use an extension called SectionLevelEditing. You can read about it in the Guide of extensibility, which will guide you to a more detailed document.
If you are wanting to keep lock editable, but section towards the bottom/remove the button Add a new one just so you can use the UIe feature Extensions, also documented in the extensibility Guide.
As suggested, I had crossed the SectionLevelEditing document. but I don't get anything in the document.
Even my requirement is condition based on the button Add a new on the CSS tab.
I tried another way
(1) I got to add new button id with developer tools (ctl01_CtlInitialPublication1_ctlCollapsibleContentContainer_ctl00_btnAddNew)
(2) what properties should be used by pulling the new id button.
I am faced with the question. Please let me know some suggestions.
Thank you
Floquet
In the JavaScript code, could you try to filter by some special keywords in your notification of duplicate instead of code GTIN number # .writing C NET.
In user interface Extensions, it has only allowed to extend the JavaScript code.
-
vSphere: incorrect display of ability Datastore
Hello
Today, a store of data in our virtual environment have a strange problem: incorrect display of ability in view vSphere Client. The correct capacity of the data store is 150 GB normally, but now I see it display 2126950.00TB (?). This issue of data store result in the failure of all virtual machines ran on that. I even worry about this issue because I am facing both of the fist. Please help me!
Thank you
This KB is probably can help you: VMware KB: 5.0 ESXi hosts fail to mount VMFS5 volumes that are formatted with TTY capabilities only.
--
-
How can I get rid of the part of message on my cell phone
I always used a desktop before and managed to get rid of the part of message via the page layout option. However, I just got a laptop and it doesn't seem to be the options to get rid of the message pane. It's driving me crazy!
I love the pane message. Why would you use anything else? ;-)
If you don't see options that you probably don't have the Menu visible. Most of the menu options can finds itself under a new "Menu of the Application" button in the toolbar. See the attached picture.
I prefer the old Menu bar, so I re - activate in all my windows in Thunderbird. Press alt or F10, then opinion | Toolbars and tick the boxes.
Now you have a Menu bar, go to the section notice | Page layout | Message pane. Or press F8.
In the Application Menu new mode, it's Options. Layout. Hover, click, until the last submenu appears.
-
How to display localized information programmatically / error message
Dear gurus,
I want to display localized text for a message of information (or error) whenever I press a button "update" in my page of the ADF.
In the action in my managed bean method, I use the function FacesContext.getCurrentInstance () .addMessage () but cannot access the Resource Bundle (a properties file) Iam for the resource string.
I use the ADF Resource Bundle for my GUI, and not a world in faces_config.xml
What is the code of the ADF or the technique to access the resource string?Check this box:
Get the value of the resource ModelBundle.properties
How to programmtically get the resource group in the model project -
Hold pan only the image to display the median part initially
Hi guys,.
Is it possible to initially display the central part of an image one pot whose width is greater than the width of the device? No matter what I try it keeps showing the left part of the image. There's another thread with a similar question - no answer... Is impossible?
Thank you
Diederik
OK thanks, I read that it is impossible for now, maybe in the future...
-
Incorrect display message order
I have Skype, signed at on several devices. Faced with a problem on a Windows 7 computer.
(1) when I get a message and open the chain icon message number in yellow next to the image of the user will not go away until I actually meet
(2) conversations are not displayed in linear order. Comments of each person in a conversation are grouped rather than displayed in the form: person A comments, comment by person B, the person has.
I uninstalled / reinstalled Skype and it has not changed this behavior
Never mind, this article fixed my problems: http://community.skype.com/t5/Windows-desktop-client/Update-7-18-Bringing-chat-messages-in-order-aga...
-
How to display HTML content in the message body part
Hello world
I get the whole message as address, subject, time sent & get the HTML of the body text, and the I want to create a new message using HTML text please help me how new message will be created by using HTML text body.
BlackBerry Smartphones do not support sending messages in HTML email.
-
User account incorrect displayed on the logon screen
OT: Displayed Incorrect user account
Hi all
When you switch on my laptop, instead of my list of normal user account, the screen displays the message "incorrect username and password" - OK.
If I select OK, a profile of incorrect user account appears. Strangely although perhaps, the specified user name, actually part of my email address?
I tried to enter all kinds of passwords relevant to me, but of course, who are rejected and I went back to 'bad user' - However, if I then click on the option "change user", then get a screen showing both my own correct profile, right next to the bad. By selecting the correct account, then I can access my homescreen, as usual. I go to the user account page, expecting to remove "rogue" account, as you would with a guest account - for example - but - hey - he's not here, not anywhere for me to remove I can not just simply get rid of it. OK - this is something I can live with - but it's so boring, Forums, so far, failed to help. Experts or skilled geeks out there? I am running Vista Home Premium + SP2.
Thank you.Hi silverfox,.
You have made no changes to the computer before the broadcast took place?
Method 1
Try the following steps:
a. click on start
b. type the three letters cmd in the search box, and then click OK.
c. Enter the following command and press ENTER:Control userpasswords2
d. click your account name.
e. uncheck the box that requires users to enter a password.
f. click OK.
g. When prompted, enter your password.Method 2
Follow these steps and check if that helps:
a. Click Start, type regedit.exe in the start search box and press ENTER.
b. open the registry at:
HKLM\Software\Microsoft\WindowsNT\CurretnVersion\winlogon
b. Add a new string value called AutoAdminLogon and set the value to 1
c. Add a new string value called DefaultPassword entry and set its value to the password for the user indicated in DefaultUserNameNote: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registryMethod 3
Check to see if the same problem persists in safe mode.Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeAdditional information:
The Windows password problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Windows-password-problemsMicrosoft's strategy concerning lost or forgotten passwords
http://support.Microsoft.com/kb/189126 -
Thunderbird Inbox date of 1 addresses incorrect display. This can be corrected?
I have a person whose e-mail address is plus.com where the date displayed in the Inbox of Thunderbird is still wrong. correct date: 09/04/14 is displayed as 01-08-06.
I checked in Windows Mail and Gmail where the date is displayed correctly.
Thanks for the information I requested.
After reviewing, I see the Date: header is the one with the wrong date: Date: Tuesday August 1st, 2006 06:03:52 + 0100. It is usually sent to the system time. All other date headers (envoys:, :) received are correct and match servers to send/receive.)
I suspect that your friend date / time may be incorrect. Can you ask them to double check?
It seems also Thunderbird displays or uses this date when it displays a message.
You can change it to view > sort by > Order Received and also add a new column in the messages pane, as shown in the attached screenshot.
Perhaps the IMAP received date could also help to work around this problem, if the date of such receipt displayed in the columns of the message pane turns out to be incorrect.
As usual, before going further and try what it is, Please make a backup of your profile. Is that what I mentioned a backup would be ideal? Oh and Please make a backup of your profile.
-
I always use rev 31. This is the last version that is compatible with the add-in on, "Multicolumn Bookmarks 1.5', I have several brands of books collected over the years and the single column format is frustrating and not helpful."
Asked to provide a current version, which is compatible with "MultiColumn Bookmarks 1.5' Fire Fox, or provide a favorite navigable multi-column as option display in a near future program revision Fire Fox.»
Sincerely,
Pierre Arnold
Sorry, to complete the thought:
(1) install Stylish from the Mozilla Add-ons site
https://addons.Mozilla.org/firefox/addon/stylish/
(2) then back to the user page of style to get the style (the button should be green instead of blue right here)
https://userstyles.org/styles/119797/bookmarks-menu-in-multiple-columns
Maybe you are looking for
-
5s red dot for voicemail iPhone
Display of 5s IiPhone red dot on icon voicemail even after that all voice messages have been removed. What should I do to get rid of red dot?
-
Satellite A100 PSAA8C - cannot install Power Saver
Hello I reformatted my laptop toshiba Satellite A100 PSAA8C SK800C today and I was expecting to download all the drivers and install them. However, when I download the 'power saver' among the official website of toshiba, I was not able to install.Not
-
Sorry, we do not recognize your sign in details
When I try to connect to the desktop application Skype on my computer, using my Facebook account, it is said that it does not recognize my login information. Please check your Skype name and password and try again. Although I didn't know that I was u
-
Just made my first film on iMovie 11 to show the new apple TV. Worked well started a new project two days ago, but now when I try to open iMovie it starts with 'validation library iMovie on computer' and then seems to load the last project I worked
-
a thin blue line suddenly appeared in the center of my computer Tips to get rid it please.