a thin blue line

Similar Questions

• Thin blue line on the display on Satellite Pro U200

  My laptop screen has suddenly started to show a thin blue line that goes up and down the screen, so that it does not interfere with the details of the screen it is very annoying and I d rather try to get rid of it.

  Has anyone seen this happen before?

  My first idea was a display problem, but this problem could be linked to the fault of the graphics card too.

  So how can I test?
  Well, you can connect an external monitor to the laptop.
  If the same thin line will appear on the external display, a graphics card problem may be possible.

  In both cases, the hardware must be replaced. I think that it s time for the guy to ASP.

• The pencil tool appears as a thin blue line any size it it

  I'm new to flash and animation and everything is confused and goes wrong! First of all when I choose a color for the scene, it remains white. Also when I draw pencil lines are these blue lines, even if I chose black. If I adjust the width of the line remains the same width of tiny. It's so frustrating ugh why can't humans just interact with others today and have real lessons available instead of me trying to teach myself please help me. I would like to really really appreciate it. Thank you.

  In the main menu choose View-> Preview Mode-> and make sure that "Describes" is not selected.

  If you want the real lessons with humans, you will need to find a local college who still teaches Flash

• What does a thin red line above the finder icon?

  And how do I get rid of him?
  

  Thanks to you all

  Take a look at the thread what the thin blue line above the average of icon Finder?

• Long blue line of the axis on the display of the Satellite A100-207

  Hi guys

  During the few days a thin blue line appeared in the center of the screen-it disappears and reappears on the change of the angle of the screen of the laptop open. Anyone have any ideas as to the cause and possible solutions?

  See you soon

  April

  There is a very simple method to find out what might be wrong.
  Connect the laptop to an external monitor and see if the same thin blue line appears on the second monitor.

  If the same line will be available on the external monitor, I assume that there is something wrong with the cell phones of the GPU (graphics chip).
  This could be a case value because the graphics card is attached to the motherboard and the entire motherboard must be replaced to solve this problem.

  But if the line does not appear on the second monitor or there is a problem with the LCD itself, or with a small part as FL-ups for example.

  In any case, it seems to be a hardware problem, and in this case he must contact the ASP!
  Try to contact the technician and ask for later handling.

  Good luck

• Why am I a thin blue vertical line on screen?

  Why am I a thin blue vertical line on the screen of my PrecisionM4800

  .? Is there problem with Video card?

  Hello Karthi.SK44,

  Thanks for writing on the Dell Community Forum.

  I suggest you to test the display on the external monitor to confirm if the screen is bad on external monitor while the motherboard is faulty.

  Then run LCD BIST (built-in self-test) on the system to shut down the system, then press and hold the power button. Then put on the system where, in solid colors will be visible on the system. If the line is visible during the test, then the screen is defective.

  If these two tests pass and then make sure that the system ins safe mode with network to eliminate the operating system.

  I hope this helps. If there are questions more respond to this message.

  Nice day!

  Sincere greetings,

• Blue line or red vertical to the right of the screen

  Hello, note that I'm a bit new to making videos, so my vocabulary may be a bit off. So when I edit and I'm at the end of a sequence and I want to put a little fade effect or a video black for a break, a thin blue or red vertical line appears to the right of the preview screen. I did some research and learned that it's something that was added in an update earlier to mark the end of a sequence. Is it possible to disable it, as it appears in the exported file? !

  8 the number.  As in 1920 / 8 = 240.  You want to make sure whatever dimensions you use are point remains divisible, not decimal.

• pale blue line to the bottom of the iphone 6

  Hello

  I have a pale blue line running down my iPhone 6.  Not sure what the cause of this is.  This can be corrected?

  You can make an appointment at an Apple Genius Bar.

  Or send the iPhone to service > iPhone response Service

• I have a blue line on the left side, going up and down my screen.

  I have an iMac 21.5 inch late 2009 model and running El Capitan V. 10.11.6. My problem is that I now have a blue line that extends from the top of my screen, starting to the right of 'File' and runs all the way down. The only thing I did recently was last updated iTunes on 18 July and I updated on July 20 of the OS that was yesterday.

  The single trouble shoot I did is off my computer for a few hours. However, the line is always there. Someone at - it this experience? I have attached the Image after reboot of my iMac.

  

  Have you tried a system management controller - reset?

  Reset the management system (SCM) controller on your Mac - Apple Support

  This reset also covers certain aspects of the resolution of the screen:

  How to reset the NVRAM on your Mac - Apple Support

  Not sure if the symptom is indicative of the material cause; using above

  Links may be able to solve the problems, and then decide if a visit to the CENTER or

  Apple Store (engineering) for inspection would be wise.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider

  I hope that a reset or other aid.

  Good luck & happy computing!

• LaserJet pro 400 color: Blue lines on the right side of the page when printing in color

  When printing in color I get this blue line that occurs on the right side of the page. It is darkest near the edge and shoot low towards the printed part of the document. It is a vertical line that follows the entire length of the page. I printed a report of quality and it is always present. In my view, this indicates that it is a hardware issue, rather than software. Is there some rolls or the part that needs to be cleaned? Can you provide a link to the instructions?

  Thank you!

  Replace the cyan toner cartridge.

• What are the blue lines in the edition of flex?

  What are the blue lines in the edition of flex?

  They are markers of flex tempo... Info of tempo based inserted automatically embedded in the file. If you want to remove

  Edition->-> remove tempo tempo. -then reset flex markers

• Qosmio G10-133: the blue lines on screen

  To all those who can help you:

  I turned on my Qosmio yesterday to find a series of unwanted blue lines, distorting the Qosmio logo. Lines and distortion continued until the operating system came at the opening of my office. At this point the whole system locked and the screen went completely blank.

  The Qosmio player suffers from the same problem. The boot system, but crashes when the display is asked to do something.

  I can open the operating system in safe mode, but the lines still appear to a lesser extent on the screen.

  I have run all the tests and has been through the manual troubleshooting section. I tried to reinstall the drives and roll back to the previous facility. But, for all that I try, nothing will change.

  Qosmio my friend did exactly the same thing a month or two it is a. Solution from Toshiba was to replace the motherboard.

  My Qosmio is still under warranty, and I am very happy to send it because Toshiba has one of the best customer service I've had to face.

  But, I was wondering if anyone had any ideas?

  Thank you very much.

  Hello

  I also very pleased with the customer support service Toshiba m.
  I think that the simplest and the best way to resolve this weird display problem is to bring the unit to the ASP. Laptop you is guaranteed to be protected and a replacement is free.

  Good bye

• Qosmio F30-117 - green and blue lines on screen

  Then my F30-117 worked well recently until I turned on and had green and blue lines (kind of like scan lines) straddling the fence.
  I tried to install the new drivers from nvidia, but that has not worked, as Vista comes to pick up their as unknown.

  Anyone who has a solution? Don't you think that the graphics card needs to be replaced?

  Thanks in advance!

  -Eric Zehetbauer.

  You can easily determine what's the reason for this.
  Do you know how?

  Simply connect an external monitor to the laptop and check the top image.
  If you have the same problem on the external monitor, the reason is the graphics card or motherboard, otherwise it s a display problem internal.
  Check it!

  In addition, you should only use the drivers from Toshiba. The Nvidia drivers don't have a for the graphics chip overheating protection could be damaged. It s on your own risk.
  So, try to install the drivers of Toshiba.

• Satellite A100: Thin yellow line on the screen from top to bottom

  Since this afternoon here a thin yellow line up and down on the left side of the screen. Reset does not work. It is already there, when I start my laptop. Anyone have any idea what it is? Thank you.

  Hello

  For me, it's like something wrong with the hardware.
  The Satellite A100 is a new model of laptop and I guess you laptop is covered by the warranty.
  I recommend you contact Toshiba service partner in your country.
  Explain the display problem and I? m ensure that guys will help you.

• SSD is full blue line

  OH this man makes me crazy. Why is the SSD completely filled with blue line?

  Can you provide a screenshot?

  Ciao.