Incorrect parameter when you try to add the header/footer?

Similar Questions

• I get "access denied" when you try to add the component 4543BD

  I get "access denied" when you try to add the 4543BD to my diagram. This component has been added since a previous version. I use Multisim version 12.0.0 student edition.

  Hi Diarra,

  I checked my database and the 4543 isn't in the student edition. If you open a drawing that was created in a version more recent as the education edition and copied the part to your database, when you place this part, you will get the access denied message.

  Attached is a diagram with the part, you can open it and build you circuit around it.

• My MMC crashes when you try to add the Certificates snap-in

  My MMC crashes when you try to add the Certificates snap-in

  Error: Microsoft Management Console has encountered a problem and needs to close.

  When to see the details, it shows a mfc42u.dll error.

  Hey Sankar,

  Try Mircosoft Fixit: http://support.microsoft.com/gp/slow_windows_performance

  You will need to authenticate Windows.

• Using script - library locked when you try to add the file to it

  Hello

  I'm just a simple script that I can run with my engines of the action, so if I add new enum values I can create new wrappers quickly. I am able to create a new VI on disk, but when I try to add the the VI to the library, I get "error 1562: library, or the specified project is locked." Just before adding the article, I tried to adjust the State of the library "Not locked", but has not been the tower.

  Directions to see the error:

  Open attached zip file

  Open 'Engine.lvlib Action '.

  Run "Script - Create Wrapper.vi.

  Please let me know how to get around this, I thank you,

  Gregory

  There are two reasons at least a library locks: 1) something he possesses is running, 2) is open in two or more instances of the application.  (This applies to classes too.)

  I started a project and took your scripts out of the library (to avoid the #1) and then open your Library Reference by path in your script, be sure to include the reference of the application (to avoid the #2).

  Works now.  (With the exception of the Init.vi but you mentioned earlier that you knew about it. But point 1 and 2 of article work fine.)

• "Popup error ' A:\ is not Accessible, incorrect function" when you try to read the "A" drive in Explorer.

  When you try to read a disk in the 'A' drive from Windows Explorer, I get a Popup with a white 'X' in a red circle and a message that "A:\ is not Accessible" "Incorrect function" and an OK button at the bottom.  It happens to any disk, formatted or not, with the files or empty.  I replaced the disk drive - no help.

  I don't know if it's a windows setting went crazy or a motherboard problem.  My BIOS seems correct.  If I do a 'fill' of window hardware in administrative tools he tells me that I have data on the disk.

  I have XP - SP3.

  Any ideas-

  go to a command prompt and type "sfc/scannow" (without the quotes) and let it run... see if this is helpful at all.

  Hope do you feel better soon.

• The name already exists error when you try to add the host to the cluster

  I created a cluster that currently has no inside host. When I try to add a host I get an error that says: "the name"ip address of the host, I add"already exists. I don't understand why I get this error if there is no showing on the cluster host. See below for the screenshot.

  Your screen shot shows hosts is already part of the inventory - if the host is already part of the theinventory have not need to add it again - simply drag and drop it into the cluster

• Error: Windows print spooler is not running when you try to add the HP printer wireless

  I'm trying to start the Windows printer spooler and do not know how.  Can anyone help?

  Thank you

  Original title: I TRY to ADD a PRINTER of HP WIRELES in MY PORTABLE AND I GET AN ERROR MESSAGE THAT SAYS THAT my WINDOWS PRINT SPOOLER NOTR IS RUNNIN'.  How can I START THE SPOOLER?

  Hi Samsodano,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can run the Microsoft Fixit to the below mentioned link and check if it works.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us

   

  Method 2: You can consult the following Microsoft article Knowledge Base and follow the steps in the article to resolve the problem.

   

  You cannot add a printer and you receive Printer Spooler error messages in Windows XP

  http://support.Microsoft.com/kb/324757

  Let us know if it helps.

• BlackBerry Smartphones for business enable when you try to add the email account

  Hello

  I recently got a BlackBerry Torch 9860 running OS 7.1 and I try to add my personal GMail account. However, whenever I try to add an email in the menu setup, he invites me 'enable Enterprise. "

  Is there a way to disable this? My phone is personal and it is not related to any company.

  Thank you

  gajariam

  Without a blackberry data plan, that you cannot set up an email.  You must get this plan first.

• When you try to add the option "number of words" for the column headings in the window my documents, the number of words doesn't quite show

  For school, I need to take a screenshot of the header of column of count of Word showing under my documents.
  When I added the option to account for Word for column headers and clicked it twice so that the word count
  show for files listed, nothing shows up.

  Any help with this would be greatly appreciated!

  Hello

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, you are having problems with the number of words not displaying do not.

  What is the format of the Document?

  Number of words is a feature that is available only for Documents Word from Microsoft.

  http://Office.Microsoft.com/en-in/Word-Help/count-the-number-of-words-in-a-document-HA010368775.aspx

  Meet us if you encounter problems with the number of words or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• 0 x 80070011 when you try to add the Media Center of Windows 8 Pro

  I am attempting to add Windows Media Center to my installation of Windows 8 Pro but get an error message saying something with evil.  Looking at the logs, I see that the problem is "DoTransmogrify failed due to error 0 x 80070011" which indicates there is a problem with my user directory is on a drive other than the Windows folder.  Since I have an SSD relatively low to start I moved my user to a much larger hard drive folder.  Should not directory junctions work the same as if the file was on the same drive?  Is there a work around short replacing my user on the c: folder?

  Thank you!

  I had a similar problem with window 8 RSAT tools that lead me to this post in my search for a solution. I'm not positive that this will solve your problem but it worked for me. Because the Setup program does not seem as follows symbolic links that point to different disks, I simply said the installer the real location of the profiles it is updated during the installation. Open the registry editor and navigate to:

  HKLM\Software\Microsoft\WindowsNT\CurrentVersion\ProfileList
  Change the location of the "Default", 'ProfilesDirectory' and 'Public' StringValues to point to the real target of your users path a symlink on drive c. (IE. "D:\Users\*).
  Run the Media Center Setup
  Change back the path in the registry.
  (I'm not positive that this is necessary, as you'd still have the symbolic link on your C drive as points that anything using this path to the right folder, I just changed it back to %SystemDrive%\* so that I could test to see if the RSAT tools has always worked without the explicit path used in the registry.)
  Good luck. I hope this works.

• Script to create virtual machines fails when you try to add the disk to the cluster data store

  Hello

  Attached is the script that I used to create virtual machines and it works very well when virtual machines are created to warehouses of unique data, but do not have clustered data warehouses. I think that the reason is that it creates the virtual machine through the esx host (who does not know the cluter) and not via vCenter (who knows about it). Unfortunately I do not know how to fix.

  Thank you

  Astra

  Looks like he needs a store of data for this parameter object. So we need to do a get Datastore cluster I can try to test tomorrow, but try this:

  If ($datastore1 - only 'none') {}

  $drscluster = get-DatastoreCluster $datastore1

  $vmadddsk = new-disk-hard - VM $gstname CapacityKB - $datastore1size - data $drscluster store

  }

• Error when you try to add the email account

  I have a new Macbook Air and Mail showing the error "this account already exists" when trying to add my account.  My email account does not appear in the accounts. What should I do?  Thank you

  The following thread might solve the problem.

  mail says "this account already exists", but there is nowhere to find

• Get the error code 0x00000002 when you try to add the printer

  Original title: while my printer works on my destop

  My laptop: HP Pavilion notebook g6

  My Brother MFC j265w printer
  I could not add this printer to my laptop. I've always said [printer driver has not been installed: impossible operation completed (error 0 x 00000002)]
  While this printer work with my destop [home network

  Hi Dan,.

  The error code occurs if Windows does not connect to the printer.

  1 are even operating systems in the desktop and laptop?

  2 are the correct printer drivers installed on the computer?

  Run the Fixit and check if the error code occurs.

  http://support.Microsoft.com/GP/printing_problems

  Answer please if you have any questions.

• Operation Failed, error 0 x 00000002 when you try to add printer on Vista Home Premium

  WiFi printer (Kodak ESP 7 all-in-one) works very well for centuries. Had to do a system restore with my HP under Vista Home Premium laptop. Then the printer could not be detected. Removed from the printer. Downloaded latest driver from Kodak. When you try to add the new driver/printer, it gives me an error 0 x 00000002. Also just tried to add the printer in the printer browser window and does not see on the wi - fi network, even though I know that it is connected.  Kodak assures me that it's an OS problem. I know that the print spooler and dependencies are running. Have tried various solutions several times between reboots.

  Hello

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the other links here

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Call "HostNetworkSystem.UpdateVirtualSwitch" for the error of the object when you attempt to add the second NETWORK card

  Hi there - first post here, so please be nice :-).

  We are just trying to place an ESX4.1 own deployment in our environment (no previous installation of VMWare) to our main office, using Dell M610 and blades blades M600 to what would become our DR - two sites site hosting VMS on Equallogic iSCSI SAN disks.

  I configured 4 of our blade M610 with ESX 4.1 successfully and they work very well.  These blades have double NIC onboard, and after the initial installation of ESX, I could go to the virtual switch and add in the second NIC like vmnic1 (because one had already been detected during installation).  This fine workd for 4 guests on the M610 blades.  However, I came today to make my first installation on one of the old M600 blades and I encountered a problem.

  Installation went without any problems and I was able to add the host in my vCenter.  I can change all the settings without problem (created the Port of VMKernal for my connection to SAN iSCSI etc, but as soon as I try to add in the second NETWORK card, he paused for a while, and then I get the following error message:)

  Call 'HostNetworkSystem.UpdateVirtualSwitch' of object 'networkSystem-56 "on vCenter Server"VCEN01." ournetwork.local"failed. (network name has been changed for post).  When this happens, it locks up again for several seconds, and when the system returns, I can no longer communicate with the ESX host (Observer of events in vCenter watch 'host is not responding' and I find that I can not ping the host unless I reboot it.)

  If anyone has any suggestions I would appreciate it that I don't want to proceed down to the line with our Installer if theres an underlying issue and I need to redo everything.

  Concerning

  EFIN.

  Do you get the same error when you try to add the network adapter by using the command line?

  1. esxcfg-vSwitch - L vmnic1 vSwitch0

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.