Similar Questions

• My battery percentage is not accurate, I will let it charge all night, I wake up and it's on 80 so so I cut my phone to make it precise. Also my alarm clocks do not go to sea, and it's starting to be a problem.

  I need a solution to my battery unaccurate percentage and help with my alarm clocks that they leave mounting

  Hi there alara11,

  It seems that your phone battery does not charge, and your alarms do not seem to jump when you value. We should be able to solve that with troubleshooting software, so I would like to start by leaving the clock app and the settings:

  Force an app to close the iOS
  https://support.Apple.com/en-us/HT201330

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you did this force restart the unit with the Home and Sleep/Wake buttons as described in the following article and test questions again:

  iOS: switch off and on (restart) and reset
  http://support.Apple.com/en-us/HT201559
   
  I don't think that, but if the problem persists, save your device in iTunes, then restore it like new and verify that it works.
   
  How to clear your iOS device and then set up as a new device or restore from backups
  https://support.Apple.com/en-us/HT204686

  If this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself. Thank you for using communities of Apple Support, let us know how it goes!

• Illustrator is not accurate with the option of the rectangular grid tool

  Do you know what grinds my gears?

  That's when I put a rectangular grid with 500 x 500 mm and 500 horizontal separators by 500 dividers.

  I discovered while between the lines the space is not 1, but 1 001 or 0.998 mm. It pisses me of so many things.

  Because I wanted a simple task like draw a 500 x 500 mm with two 500 horizontal and vertical dividers grid of each

  and then a grid of the same size with thicker lines on top, but with both 50 horizontal and vertical separators.

  Then, I went to that print on paper to make some laptops with checkerboard grids.

  The lines are not in the correct places! Why is this?

  (Illustrator CS 6)

  

  Xazann,

  If I (put) correctly, you will need to use a splitter less in each case: 499 (as well as the outdoor square frame) dividers will give you 500 places, and 49 will give you 50.

  What you have now are 501 and 51.

• Photos of GH4 RAW converted with ACR not producing not accurate color

  Since I left the GH3 Panasonic for the GH4 I've struggled to get accurate color of my raw photos.  The color looks great in camera and even my free Faststone Image Viewer creates precise JPEGS, but when I open the in ACR look muddy and washed out green, and other colors are simply not accurate.  I tried to create a profile but the inaccuracy of the way it displays them doesn't seem to be compatible, so which works quite well on a single photo is completely wrong for the next.

  I have attached a file with the default interpretation of the cab on the left and the thumbnail created in Faststone on the right.  Faststone image is very accurate - vivid green and the feathers on the head and neck of the bird are real, not the red tint that ACR created.  I have tweaked and twisted it and although I can get the Greens right, these feathers will never look right, and I played with each slider in ACR, especially the sliders STL.  Although I don't think that this is the case, some might think that the interpretation of the cab is more attractive, but it is not accurate.

  I kept hoping that enough other people have this problem and there will be an update, but that never happened.  Yesterday I was going to try to download an EXIF Editor so that I could see what would happen if I changed the EXIF of GH4 GH3, McAfee, but warned me that he download was dangerous so I stopped there.  Is there a tool in my suite Adobe complete which would allow me to edit the EXIF data?  Any other thoughts would be appreciated.

  After some research, it seems that Adobe didn't create profiles of cameras for the GH4, unfortunately...

  For me, both of your samples look close enough and I do not think that they would need much tweaking to look almost identical.

  Regarding the pieces of color, they work quite well in most conditions. The version of Datacolor creates an XMP preset of the HSL sliders for fine tune hue of each color channel and tone. The version of X-Rite creates a color profile in the ACR camera calibration tab and LR.

  Since the release of Datacolor uses the tools of LGV, the files must be in raw format. This means that you can even apply the corrections to the frames of a video.

• Apple not recognized with the new update ID

  What now, after the update

  Apple not recognized with the new update ID!

  I have the same question. The user and the password are ok because I can log in here: https://appleid.apple.com

  But after the last update my iPad say that "the apple ID or the password is incorrect."

• Whenever I run Firefox, it appears an error message indicating "Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist." Contact the author to this problem. »

  Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist. Contact the author to this problem.

  The above statement is in the box pop up error every time, when I run Firefox. If I click on ok in the box of Firefox opens. How can I solve this problem of initialization/launch?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  
  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
  
  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

• Personas do not work with firefox 3.6 and yet he directs me to the personas rather than themes page why?

  I've recently updated to Firefox 3.6.3. and I was wondering why I can't use personas, I discovered that they are not compatible with 3.6. But my problem is that whenever I click on 'Get themes' in the section modules, I've redirected the page to personas and tells me I need to upgrade to get the most out of the site (essentially, downgrade to version 3.5) is there any other way around this?

  == I upgraded to 3.6

  Personas (light themes) are integrated in Firefox 3.6.

  Where did you see that they are not compatible with 3.6?

  This is the reason why they probably do not work for you is your Firefox User Agent string is marred by another program you have installed, or maybe a failed attempt to usurp IE 6.
  http://en.Wikipedia.org/wiki/USER_AGENT

  • Type of topic: config in the URL bar and press ENTER.
  • If you see a warning, you can confirm that you want to move forward.
  • Filter = general.useragent.
  • Preferences that are bold, one line at a time, right-click and select Reset.
  • Then restart Firefox

  Check out the Web sites or modules incorrectly report incompatible browser and find what version of Firefox you are using

• For Portege 3490 AC adapter does not work with the Satellite A100-159

  I have a supply of 15V 120W car (or plane Kensington). It works very well with a Portege 3490CT. It doesn't do a thing with my Satellite A100-159 new. The power supply provides also 15 V 6 a. Can someone tell me why the Kensington work?

  Or does anyone have a diagram to a power supply adapted myself, preference of 11, 5-14, 12(4) and 24 VDC (23-28: 8)?

  Thanks in advance!

  Hello

  I can give t you an answer why it does not work but usually you need to use the adapter for vehicle recommended by Toshiba. Incorrect adapter may damage the laptop!
  I think that the card for Portege 3490 adapter is not compatible with Satellite A100

  That the two car/truck/Air 120W laptop charger must be compatible:
  PX1237E-1NPO
  PX1235E-1NPO

• Windows 7 Professional is not compatible with the WPS ENABLED?

  Hi all:
  I have a desktop (HP Pro 3500 Series) with Windows 7 Professional and another laptop (HP COMPAQ CQ58) with Windows 8, 1 pro.
  My internet provider is Jasstel, and it worked perfectly in my two computers.
  I decided to activate the WPS of the router (comtred AR 5387un) and they started the problems. The laptop with Windows 8, 1 runs normally.
  The desktop with Windows 7 without work and it does not allow the connection to the Internet. The generated error is security configuration, it is incorrect.
  I erased the net so that I have again the password. You ask that I introduce the safety key from the net. I introduce the key (which she's right, because it works in another computer), and he told me that I should he Nail or the sentence of the password is not right and there is not the case.
  The only thing you change is the operating system. Windows 7 is not compatible with active WPS?
  I thank any help no I don't know what to do.

  A cordial greeting.

  Text of the Decree No. presidential East I translated it with a commercial translator. I am ignorant of the quality of the translation. Excuse me, otherwise it is all about what is good who do.

  Hello colambrero,

  This model is a class computer business and would be better asked in the forum of the Business Enterprise community.

  Here is the link to the appropriate section. http://h30499.www3.HP.com/T5/business-PCs-Compaq-Elite-Pro/BD-p/BSC-271

  I offer you my thoughts.

  I was wondering why you have decided to activate the WPS? It's easier to connect wifi devices but also creates security problems.  WPA2 with a good password is more reliable in my opinion.

  In addition, your Wifi adapter must be compatible WPS and I can't confirm if your model has one or not (I assume it does).

  Windows 7 that has Service Pack 1 installed? SP1 has a fix for problems with connections WPS for Windows 7.

  Personally, I would consider not not using WPS for security issues.

  Here is an article to example of Sophos Security explaining why not to use WPS.

  http://nakedsecurity.Sophos.com/2014/09/02/using-WPS-may-be-even-more-dangerous/

  It will be useful.

• niDMM.cs exception: "the device was not recognized. The device is not supported with this driver or version. »

  Hi all!

  I have a question about using a DMM (PXI-4065) with VStudio 2008 and Measurement Studio 2009.

  Because DMM are not always supported in .net, I downloaded niDMM.cs 3.0 wrapper of the web site of NOR.

  I also downloaded example c# measure DC Voltsto compare with my request.

  Both an example and my application fail trowing the exception [-1074118656] 'the device was not recognized.  The device is not supported with this driver or version. " class constructor is called.

  DMM = new InstrumentDriverInterop.Ivi.nidmm ("PXI3::12:INSTR", true, true);

  I guess it is function of device PXI!

  I also tried to use a VISA alias as "pippo" and then I tried to insert a device unexistent name. In any case the same exception was trown.

  NOR-DAQmx 8.9.5

  NOR-DMM 3.0.1

  NI-VISA 4.6.1

  NOR-MAX 4.6.2f1

  Roberto

  Hello Robson,

  Maybe you areusing an incorrect descriptor itrument, try please the instructions contained in the following document:

  KB 33A96PCW: receive error-1074118656 when running OR DMM screws

  Let me know if this might help.

  Best regards.

• Number of strings with decimal

  Hello community,

  I would like to convert numbers to the string with decimal separators. So if the number is 52351 then the string I need is 52 351

  Another example 18653284.9653235 becomes 18,653,284.9653235

  What would be the best way to do it?

  Thank you!

  Read this thread: https://forums.ni.com/t5/LabVIEW/comma-separator-for-large-numbers-how-to/m-p/2123090/highlight/true...

  Not the first person to wish for this idea.

• 3 X TC will not work with Tamron lens

  I need help, I bought a Soligor 3 X Converter TV for use with my Tamron 150 ~ 600 mm lens, the body is a 60 d. The problem is when I try to take a shot I get an error message "Err 01 communication between the camera and lens is faulty. Clean the contacts of the lens. "If I try a Canon 50 mm f/1.4 with the Soligor 3 X tele-converter & works very well. Any suggestions to why this TV converter does not work with my Tamron? I thought that it has just a Ribbon inside the TC to establish a connection.

  PS. I also tried the Tamron 150 ~ 600mm & TC with my girlfriends rebel and I get the same message. I have a 1. 4 X and a 2.0 X TC and Tamron 150 ~ 600 mm lens works very well. Also I clean the contacts from each end of the TC X 3. Thank you, Blair

  I assume that the error message is pretty generic and applies to any type of communication error, including incorrect data.  The incorrect data, which I think would be f/stop, which in this case would be higher to f/16 reports ot the camera...  The camera that rejects a number as being of bad data, out of range, etc.

• My computer did not come with a Windows XP restore disk

  My computer did not come with a restore Windows XP disc and I don't know how to get one, because my computer keeps restarting itself and that goes, "your computer must was closed incorrectly, or because of a power failure" and he gives me 3 options of safe mode and then gives me the opportunity to go to windows normally... but all the options I chose... It keeps just restarting on me... My computer did not come with a restore disc and Idk anyone who owns one... then where would I go to get one?

  Some computers have a built-in hard disk recovery partition.  Search for information on this subject on the BIOS screen that appears the first thing when the computer starts.  By pressing Ctrl + F11, accesses a recovery on some Dells partition.

  Otherwise, contact the computer manufacturer and ask if they can provide a restore disc.

• Note Pad guard popping up with everything and saying is do not compatible with BACK...?

  Whenever I click on anything whatsoever that a box of Notepad launches with a ton of gibberish told him, not compatible with BACK, nothing else than basic internet does not work.  If I try to open something just the notebook opens with gibberish... Help!

  Sounds like an infection (try this free online scan: http://safety.live.com )

  or something has changed the 'open with' to be 'notepad.exe' exe

  For that, try this: http://www.winhelponline.com/articles/165/1/Restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  -John

• says my version of windows media technologies is not compatible with my windows vista home premium how to fix this

  my windows media technologies is blocked that run said is not compatible with my vista home premium how to fix

  Hello

  I will need some additional information to help you best.

  ؠ exactly when you get this message?

  ؠ What is the exact error message you get?

  Could ؠ you explain your problem in detail?

  In the meantime, you can follow the instructions that might help you resolve the issue.

  Analysis of auditor of file system (CFS) that might help you resolve the issue.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. Right click on cmd in the list programs, and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  1. At prompt command, the following line, and then press ENTER:

  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.

  http://support.Microsoft.com/kb/936212/

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP