Incorrect time in the table of contents

Similar Questions

• Remove the length of time of the table of contents

  Hello

  I am using Captivate 4.

  We add TOC in our movies and want to remove the length of the table of contents, as shown below:

  

  I tried to uncheck the checkbox 'Show time' located in the 'skin TOC settings' dialogue, but it did not work.

  Can anyone help?

  Thank you

  Merav.

  Hello

  Do not insert it as a widget, but as an Animation (which is not very clear on the site of Michael). You can simply ignore the warning of _root. It works very well. Sorry I forgot to explain. You need to verify that your PC is AS2, however, it does not work in AS3.

  Lilybiri

• Update the table of contents (Cp7)

  Hi all

  I found that when I try to uncheck the slides that I don't want to not show in the table of contents (about 190 slides in the 200 in a project) Captivate crashes with a fatal mistake and I lose any unsaved work.  I had to uncheck about 10 boxes at a time, close the table of contents and save but it is very time consuming.  Is there a way to uncheck all of the slides by default and select just those I want to appear?  Y at - it a fix for the bug fatal error?

  Thank you

  Cindy

  Hello

  Welcome to the Adobe Forums.

  Make sure you have you CP 7.0.1 update installed

  You're on MAC or Windows?

  It happens with a specific project or a sample as well

  Any similarity between the slides that you do not want to display in the Table of contents?

  Thank you

  Vikram

  Adobe support

• Customize the table of contents

  Hello guys,.

  I ve had a little problem with the table of contents in Captivate.

  I would remove the time in the table of contents. (see photo)

  But I Don t know where to find the function to turn it off.

  

  was soon Smoky

  Hello

  This tutorial is perhaps what you are looking for?

  http://www.cpguru.com/2010/01/29/tutorial-hide-the-total-duration-in-the-TOC/

  Lilybiri

• Headings flow incorrectly on the table of contents

  I created a document with a table of contents. When I add the table of contents, the first page contains only the first 9 titles. The rest continue on the next page.

  I've included a screenshot of the problem below. It seems not serious if I adjusted the TOC styles before add you it or after. I drew the pages of table of contents based on [none] (instead of A-master). I don't use facing Pages. I used the primary text block option when I created the document. The text has been placed at the origin of a RTF.

  I had rather the text flow correctly rather than to have to do some kind of hack (e.g., making it the first smaller text box and one on the second page slide up on the first).

  The problem also occurs on the third page of the TOC (once again, after a title of level 1 - this time section 5). I hope it's the same solution for both.

  

  Are there options keep applied to securities sup (under the stytle) causing the rupture?

• Duplicate sections throughout the table of contents after generating the HTML5 multiscreen output

  Use: RoboHelp 10, version 10.0.0.287

  Steps to reproduce the problem:

  1. click on file > create > main layout (Multiscreen_HTML5)

  2 al ' Generate window click on [Save and Generate]

  3. wait

  4. click on [view results]

  5 results show swathes of the table of contents reproduced in other sections.  10 more times to repeat the generation before that the entire table of contents points are correct and I can publish.  This is not preventing me from doing the job, but it's certainly a time killer.

  Background: I inherited a working version.  I did not create it.  I have more knowledge of the HTML language, but I'm not a developer.  I didn't upgrade beyond RH10 option.  I have studied this many times, but have not been able to find a solution.  The only other thing I've seen sometimes are error messages related to the toctree.js file, but I still don't understand those.  Even when I have not, this past yet, but I have included this error just in case it may be related, although I suspect that it is a separate issue.  I don't currently have the line in the js file because this sample is old and I have not seen the question at least a month.

  Other Notes: I've seen a few posts on a similar question in the printed version, but, I do not have a printed version.  I don't know if that makes a difference, and do I know if anyone in the past that put in place or even where to go to watch.

  

  

  Try to move the project to somewhere that the path is not so long and generate a new folder.

  See www.grainge.org for RoboHelp and Authoring information

  

  @petergrainge

• RoboHelp 2015 (12.0.2.384): The search returns topics do not are included in the table of contents

  ENVIRONMENT: Windows 7 Enterprise SP1, 8.00 GB of RAM, 64 - bit OS, Office 2010, Adobe Acrobat X Pro, Acrobat Reader DC 2015.017.20050

  DESCRIPTION OF THE PROJECT:

  • A single RoboHelp HTML project with three exits. One of the outputs is a 'validation' reference that has its own Table of contents.
  • Validation reference Table of contents contains a subset of the subjects in the main help system. For example, the help system main table of contents contains a folder named 'Administration '. This folder is not in the table of contents of reference for Validation.
  • The reference of Validation is displayed on a public web site. Therefore, we applied the tag "Non_public_info" contained in the topics shared that we do not want to appear on the public website.
  • WebHelp parameters are:
    • Validation reference TOC
    • No map file, no sequence to browse
    • Conditional compilation expression: NOT_Non_public_info_AND_NOT_StyleGuidelines_AND_NOT_TRP (we keep our Style rules in the project to facilitate access during development. TRP content must be rejected because it was not released.)
    • Exclude non referenced topics of output is selected.
    • Search options. Only 'Show Total number of search results' and 'View AND search Option in outputs' are selected.
  • After generating the WebHelp, we remove the files that we don't want (RoboHelp generates empty folders, even if the files are not in the table of contents.)

  PROBLEM: A search in the help of Validation reference reveals the topics that we think should not be included because the subjects themselves are not in the table of contents of Validation reference. For example, the section "Data quality analysis" is in the main table of contents help, but not in the table of contents of reference for Validation. Therefore, we do not expect the topic appears in the search results pane at all. But he does. When the user clicks on the subject, the "Resource not found" message appears.

  Nothing shows the topic Style_Guidelines because the StyleGuidelines label conditional construction applies to the entire folder and the "Style guidelines" book in the main table of contents. (Same thing for the TRP folder).

  QUESTION: Why are topics which are not in the table of contents and whose records are not in the project at all appearing in the WebHelp during a search? We need to rewrite the expression of conditional compilation or establish conditions differently. We assume not have topics in the table of contents, not including the topics not referenced in the output, and remove empty folders would be the way to go. Any help is welcome!

  Thank you very much.

  Carol Levie

  The table of contents does not control what ends up in the output for output online. All content tagged and tagged content which is not excluded by the expression of construction will be included. The parameter 'Exclude topics not referenced output' more exclude all subjects which are not in the table of contents AND are not related to any topic which is included in the output.

  On the other hand, for the print output the table of contents control which is found in the output. I think that it will fire a lot of people.

  If you generate the help and that you do not remove the unwanted files, do you still have the error? If this isn't the case, you know that the topic is referenced somewhere in the content of the reference of the Validation.

  Here is the help of RH11. I can't imagine it would have changed, but you could do a search to verify a second time for RH2015.

  Exclude output not referenced topics

  Select this option to exclude any topic that exists in the project, but is not the default theme in page layout or is not referenced table of selected contents, index or sequence to browse, or any referenced subject.

  Note: RoboHelp shows the topics not referenced that are excluded from the output in the output view module.

• Can I create a hierarchy of topic on the project manager pod or I must rely on the table of contents?

  Hello

  Can I create a hierarchy of topic on the project manager pod or I must rely on the table of contents? I use RoboHelp 9 (although I doubt that the version of the questions).

  Thank you

  Mary

  Hi Mary

  As you do this is by creating folders in the project manager, then create new topics in the files or move the existing entries in the records.

  If you work exclusively in the project manager, you are only able to move a single topic at a time. If you want to move a swarm of topics, open the pod of the list of topics and you can select as many as you want. Then drag the subjects selected to the folder on the project manager pod. Be a little careful when you drag. Often the mouse will pass over a tab at the bottom of the basket, and this can change their minds about you.

  See you soon... Rick

• RoboHelp 10 - is possible to change the icon of the TOC so that a 'book' in the table of contents. See the attached screen shot.

  In my current project for help, I have a set of topics that are specific to the use of our product in a country.  I want to change the table of contents of the specific book icon without changing all icons 'purple book '.

  Thank you.

  

  Hello

  Risk can be achieved, but if there is, it will have to be changed to code JavaScript and some "behind the scenes" files You would also be painted in the corner of having to do the same changes every time you generate the output.

  If anyone knows how to get there, it will be Willam. It will perhaps be pop and Advisor.

  See you soon... Rick

• How to insert the table of contents within a table

  Using FrameMaker 12, I create a table of contents within a table. This means, 1st column contains the number of paragraphs, the 2nd column of the text of the paragraphs, the 3rd column the page numbers. Of course, each item must fill each cell of the table. I downloaded an example.

  Thank you for your help

  Nicolas

  

  Create a table of contents in normal conditions and use tabs as separators between the page number and section number, <$paratext>.

  Then use convert FM to the usefulness of the table to convert the table of contents for a table using the table design appropriate to your catalog.

  It's a manual, and you will have to redo this each time that you update the table, but it should only take a few clicks to do. Automate the steps with a script would make it less painful.

• Use the table of contents theme in several projects

  I spent the time by changing the color of items for my Table of contents and managed to save it as a custom TOC theme. However, this theme does not appear as a selection in other projects. Because I don't see a way to export the theme to the table of contents How do you use it other projects? I used the theme > save as option, but when I import the theme in a new project the theme of the table of contents does not appeal to.

  When you go to the project - Table of contents - skin - default default theme says. Click on the arrow and you should see your custom theme renamed to TOC inside - it is not alpahbetically. I just did this and kind of panic when I don't see my modified Pearls appear, but he was there at the bottom of the list! I hope this helps.

• Page indent the problem with the table of contents entries...

  I have a few entries of table of contents running on more than one line. I would like the text to be indented from the establishment right indent/margin so that text does not as far as the Page numbers on the right margin of the text TOC block extend existing. I put a tab on the right so that the page numbers are tabulated on the right edge of the frame, but if I bring you the right margin with several (currently 5 mm) indenting, I can't have a tab stop to the page outside of the right margin.

  If I insert soft-return/new line tanks they wil get lost every time I have rebuild the table of contents (there will be a lot of it!)

  Any ideas, I'm sure it happens all the time for designers of the book.

  The same way you have a withdrawal of first line, on the left there is a final withdrawal of the straight line. You can set the right two inches (for example) withdrawal and removal of stretch to neutralize two thumbs, all on a single line will go completely to the right of the frame, and any point edge requiring line breaks will break two inches to the left of the right edge of the frame, while the last line will go to the right edge.

  

• RHCL do not pick up to the table of contents or index

  Hello

  We used RoboHTML 9.0.2 for our documentation. We connecting to our legacy word documents and generate webhelp from those. It works very well.

  We do not seek to the script process. We try to use RHCL from the command line to update the webhelp every night. The problem is that the index and the table of contents is not included in the generated file.

  I created a quick test with all our normal parameters project, and it works very well from the GUI of RoboHTML. When I indicated that I wanted to import the table of contents and the index of the working paper, I was asked to enter a new name for each. So for the Index, I have an empty index generated automatically with the same name as the project ("Demo_Wrapper"), which was initially marked as default. I have another clue, which bears the name I gave ("DW_Ind"). This index is up to date and complete the correct information. I have a setup similar to the table of contents.

  We cannot understand why everything is fine in the script generated webhelp outside these aspects. For example, the skin is correctly copied everywhere.

  Any help is more than welcome.

  Thank you

  Steve

  Hello Steve,.

  You can follow these steps:

  (1) open RobohelpHTML and double click the release you want to generate RHCL (launch Robohelp HTML 9-> under single Source Layout Pod-> Double click on WebHelp)

  (2) Webhelp settings window, under content, choose your default content categories

  (3) choose your table of contents Index & Drop Down Menu and save changes

  (4) generate WebHelp output of command RHCL, table of contents and the Index should appear this time

  Note: Assuming you generate WebHelp

  Hope this helps!

  Thank you.

  Vikram

• A link to a bookmark in the table of contents?

  I couldn't find this anywhere in help. The only time where it says link a bookmark to a table of contents was if you have used the feature of automatic creation of your table of contents.

  I think I figured out how do it, but wanted to run it by the forum to see if this is right.

  This is how it is done?

  1. Add a new page to the table of contents.
     1. Enter a title.
     2. The file name, choose the topic that contains the bookmark.
     3. Click OK to save. Your page should appear in the table of contents.
  2. Right-click on the page, table of contents, that you just created. The Table of Contents Page Properties window opens.
  3. At the bottom of the page, where it says "link to", add # and the name of the bookmark at the end.

  For example, if your subject appears in the form Entering_a_New_Customer.htm and the bookmark is called address, you would add #address the end of the filename. Gives you a link to Entering_a_New_Customer.htm #address

  Is there another way to do it? In this way requires two steps and requires that you know the name of the bookmark; You can't navigate to it.
  

  Hello

  It should be simpler than that.

  See if the screencast below the help link.

  Click here to see

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Script errors in the table of contents in RoboHelp 9

  Hello, all. I can usually find the solution to my problem by searching for existing threads, but I can't seem to find a solution this time. I recently upgraded to RoboHelp 7 to 9.0.2.271. I published WebHelp locally and checked the files in to a Team Foundation Server to be deployed in a test environment. Locally and on the QA site, the output seems fine for me and the table of contents works as expected. However, other users on Internet Explorer 7 and 8 (I have IE8) are getting script errors when you try to click on the pages of the table of contents.

  I compressed my files the and dropped on a shared and player asked a user to copy on his machine and open the start with his browser page. He always gets the script errors, while another user can open locally without any problem. This makes me think that the problem is not in RoboHelp files themselves, but I'm not sure.

  To further complicate things, in this environment, another server of QA, the table of contents and Index are empty! This is obviously a separate issue, but I'm stumped. This problem occurs in IE 6, 7 and 8. It does NOT occur in Firefox or IE 9.

  Any ideas?

  This problem has been resolved with a response from another discussion:

  Re: RH8 > WebHelp > TOC will not be rendered in IE8 via HTTPS - Fix/workaround solution?

  If the table of contents/Index/Search does not work in IE7/8/9 via HTTPS, try the following steps

  1. Go to https://acrobat.com/#d=WqbdTq-2R79ToU08-zfBEw
  2. Download the IESearchIssue.zip file. Unzip it.
  3. It will create an IESearchIssue folder. It has two subfolders
     1. RH8.0.2
     2. RH9.0
  4. If you use RoboHelp 8.0.2, go to the folder RH8.0.2.
  5. If you use RoboHelp 9.0, navigate to the folder RH9.0
  6. Navigate to the \RoboHTML\WebHelp5Ext\template_stock folder and rename the file whutils.js in whutils.js.bak
  7. Now, paste the new whutils.js already copied into the same folder.
  8. Now again generate webhelp output the required project.
  9. Host it on your server and check if it works.