Remove the length of time of the table of contents

Similar Questions

• Remove the Table of contents of a Quiz

  Hello

  Is it possible to remove access to the training when the user passes a test? Looks like there must be a way...

  Dan

  Action Rod pointing to that is to assign the value 1 to the system variables cpLockTOC. Its default value is 0. It is not even necessary to have a tip action, at least if you're on a later version of Captivate because the system variable is not in the drop-down list of the accordion to Actions in the slide properties. A simple action on enter to the first question slide will do. Don't forget to switch it to 0 when you enter backstage after the quiz to allow access again. And the linear?

  It is also possible to hide the table of contents with another variable of system but only if you use the table of contents in overlay mode.

  http://blog.lilybiri.com/system-variables-in-Captivate-6

  Lilybiri

• Incorrect time in the table of contents

  I have a 8 s sliding for more than a minute long. After mounting, the TOC always shows the time 01:26 and does not update. Saved as a new file, no change.

  Clues?

  I have tried resetting the table of contents, but duration of slides is adapted in real time, no reset necessary.

  Type securities, may I offer a tip? Label the slides instead of typing the slide titles in the table of contents. For a higher level, group slides, labeling the Group and this will appear as a top level heading in the table of contents. This has not only the advantage that resetting the table of contents will keep these labels, but they are also very useful in other cases, some examples:

  • If you want to use the jump to the slide, you can choose the label of the slide instead of the number
  • The advanced interaction, in the branching view, you'll see labels for slides instead of numbers
  • You can reduce the groups in the film strip
  • You can apply a master slide to a group

  

• Remove the Table created in the forms - IOM Designer

  Dear all,
  Is it possible to remove the Table created in the form designer?
  
  The Recycle Bin icon is disabled in the console of the design.
  
  Thank you for your help

  Restore the database.

  This is an instance of dev is for. :)

  Best regards
  / Martin

• RoboHelp 2015 (12.0.2.384): The search returns topics do not are included in the table of contents

  ENVIRONMENT: Windows 7 Enterprise SP1, 8.00 GB of RAM, 64 - bit OS, Office 2010, Adobe Acrobat X Pro, Acrobat Reader DC 2015.017.20050

  DESCRIPTION OF THE PROJECT:

  • A single RoboHelp HTML project with three exits. One of the outputs is a 'validation' reference that has its own Table of contents.
  • Validation reference Table of contents contains a subset of the subjects in the main help system. For example, the help system main table of contents contains a folder named 'Administration '. This folder is not in the table of contents of reference for Validation.
  • The reference of Validation is displayed on a public web site. Therefore, we applied the tag "Non_public_info" contained in the topics shared that we do not want to appear on the public website.
  • WebHelp parameters are:
    • Validation reference TOC
    • No map file, no sequence to browse
    • Conditional compilation expression: NOT_Non_public_info_AND_NOT_StyleGuidelines_AND_NOT_TRP (we keep our Style rules in the project to facilitate access during development. TRP content must be rejected because it was not released.)
    • Exclude non referenced topics of output is selected.
    • Search options. Only 'Show Total number of search results' and 'View AND search Option in outputs' are selected.
  • After generating the WebHelp, we remove the files that we don't want (RoboHelp generates empty folders, even if the files are not in the table of contents.)

  PROBLEM: A search in the help of Validation reference reveals the topics that we think should not be included because the subjects themselves are not in the table of contents of Validation reference. For example, the section "Data quality analysis" is in the main table of contents help, but not in the table of contents of reference for Validation. Therefore, we do not expect the topic appears in the search results pane at all. But he does. When the user clicks on the subject, the "Resource not found" message appears.

  Nothing shows the topic Style_Guidelines because the StyleGuidelines label conditional construction applies to the entire folder and the "Style guidelines" book in the main table of contents. (Same thing for the TRP folder).

  QUESTION: Why are topics which are not in the table of contents and whose records are not in the project at all appearing in the WebHelp during a search? We need to rewrite the expression of conditional compilation or establish conditions differently. We assume not have topics in the table of contents, not including the topics not referenced in the output, and remove empty folders would be the way to go. Any help is welcome!

  Thank you very much.

  Carol Levie

  The table of contents does not control what ends up in the output for output online. All content tagged and tagged content which is not excluded by the expression of construction will be included. The parameter 'Exclude topics not referenced output' more exclude all subjects which are not in the table of contents AND are not related to any topic which is included in the output.

  On the other hand, for the print output the table of contents control which is found in the output. I think that it will fire a lot of people.

  If you generate the help and that you do not remove the unwanted files, do you still have the error? If this isn't the case, you know that the topic is referenced somewhere in the content of the reference of the Validation.

  Here is the help of RH11. I can't imagine it would have changed, but you could do a search to verify a second time for RH2015.

  Exclude output not referenced topics

  Select this option to exclude any topic that exists in the project, but is not the default theme in page layout or is not referenced table of selected contents, index or sequence to browse, or any referenced subject.

  Note: RoboHelp shows the topics not referenced that are excluded from the output in the output view module.

• Page indent the problem with the table of contents entries...

  I have a few entries of table of contents running on more than one line. I would like the text to be indented from the establishment right indent/margin so that text does not as far as the Page numbers on the right margin of the text TOC block extend existing. I put a tab on the right so that the page numbers are tabulated on the right edge of the frame, but if I bring you the right margin with several (currently 5 mm) indenting, I can't have a tab stop to the page outside of the right margin.

  If I insert soft-return/new line tanks they wil get lost every time I have rebuild the table of contents (there will be a lot of it!)

  Any ideas, I'm sure it happens all the time for designers of the book.

  The same way you have a withdrawal of first line, on the left there is a final withdrawal of the straight line. You can set the right two inches (for example) withdrawal and removal of stretch to neutralize two thumbs, all on a single line will go completely to the right of the frame, and any point edge requiring line breaks will break two inches to the left of the right edge of the frame, while the last line will go to the right edge.

  

• Customize the table of contents

  Hello guys,.

  I ve had a little problem with the table of contents in Captivate.

  I would remove the time in the table of contents. (see photo)

  But I Don t know where to find the function to turn it off.

  

  was soon Smoky

  Hello

  This tutorial is perhaps what you are looking for?

  http://www.cpguru.com/2010/01/29/tutorial-hide-the-total-duration-in-the-TOC/

  Lilybiri

• Problems during the update of the table of contents

  Hello

  does anyone know why additional section numbers and points appear every time I update my OCD? Normally I just delete them.

  Thank you!

  Try to remove the numbering of paragraph TOC style options. I am sure that what is happening is to make a numbered list on the table of contents entries AND pick up the existing numbers in the text.

  Peter

• Topics in several places in the table of contents

  Hi all
  
  I was wondering if it is possible to insert a topic more than once in the Table of contents? This is probably a strange request, but the problem occurred because I imported a manual written in Word, but the part of it contains information already in the RoboHelp project. I was wondering if I could erase the information duplicated in favor of a link to what was already there?
  
  Thanks in advance for your suggestions.
  
  See you soon,.
  
  darkagn

  Stone of right: the table of contents will be get synchronized with the trial (up and down) that he meets. However, you can use redirect pages to work around this problem.

  1 create a new topic (and name it target_topic_name_redirect.htm as a visual cue for yourself). The title is the same in the topic title target (which is the name that will appear in the table of contents).

  2 remove all text in the topic in WYSIWYG mode (leaving a blank page).

  3 al ' TrueCode, add this line to the other META tags (in any place).
  

  4 drag and drop the redirection page to where you want the TOC.

  Note: A value of 0 (zero) is the duration time (none) and this topic will be displayed before the redirection to the topic target. If you prefer to make this available to the viewer redirection, you can increase it to, say, 8 or 10 and provide a text like "pick up this section of the"Configuration"section. Please wait a moment. »

  Good luck
  Leon

• Recording on DVD - "Unable to retrieve the table of contents" error

  Hi all

  Whenever I try to record on a DVD a face "could not retrieve the table of contents.

  I tried to change the recording speed, but no use.

  When I go to properties of DVD and click on activate record it does not recognize the DVD or any CD in the drive.

  Please help

  Hello

  1. what software to use to burn cd/dvd discs? Try using Nero, Ashampoo burning studio, alcohol CD and DVD software of engraving,
  2. then, I advise you to use high quality as TDK or Verbatim media.

  3
  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop and wait for the CD/DVD drive would appear once again

  If your problems persist, there may be a problem with your cd/DVD-ROM

• filter does not work in the table of contents of VMS 2.2

  I created a filter rule in the table of contents to remove some false positives on an ids sensor, the event still shows upwards, what should I check to solve the problem?

  You can change the filter on the sensor through CLI or IDM.

  Connect to your sensor via its C & C interface with your browser to this address "https://".

  After logging in, click 'Configuration'-> 'Detection engine'-> 'event filters ".

  This should bring up a list to update your filters. From this location, you can change or add a filter.

  Hope that helps.

  Don

• Duplicate sections throughout the table of contents after generating the HTML5 multiscreen output

  Use: RoboHelp 10, version 10.0.0.287

  Steps to reproduce the problem:

  1. click on file > create > main layout (Multiscreen_HTML5)

  2 al ' Generate window click on [Save and Generate]

  3. wait

  4. click on [view results]

  5 results show swathes of the table of contents reproduced in other sections.  10 more times to repeat the generation before that the entire table of contents points are correct and I can publish.  This is not preventing me from doing the job, but it's certainly a time killer.

  Background: I inherited a working version.  I did not create it.  I have more knowledge of the HTML language, but I'm not a developer.  I didn't upgrade beyond RH10 option.  I have studied this many times, but have not been able to find a solution.  The only other thing I've seen sometimes are error messages related to the toctree.js file, but I still don't understand those.  Even when I have not, this past yet, but I have included this error just in case it may be related, although I suspect that it is a separate issue.  I don't currently have the line in the js file because this sample is old and I have not seen the question at least a month.

  Other Notes: I've seen a few posts on a similar question in the printed version, but, I do not have a printed version.  I don't know if that makes a difference, and do I know if anyone in the past that put in place or even where to go to watch.

  

  

  Try to move the project to somewhere that the path is not so long and generate a new folder.

  See www.grainge.org for RoboHelp and Authoring information

  

  @petergrainge

• Headings flow incorrectly on the table of contents

  I created a document with a table of contents. When I add the table of contents, the first page contains only the first 9 titles. The rest continue on the next page.

  I've included a screenshot of the problem below. It seems not serious if I adjusted the TOC styles before add you it or after. I drew the pages of table of contents based on [none] (instead of A-master). I don't use facing Pages. I used the primary text block option when I created the document. The text has been placed at the origin of a RTF.

  I had rather the text flow correctly rather than to have to do some kind of hack (e.g., making it the first smaller text box and one on the second page slide up on the first).

  The problem also occurs on the third page of the TOC (once again, after a title of level 1 - this time section 5). I hope it's the same solution for both.

  

  Are there options keep applied to securities sup (under the stytle) causing the rupture?

• Can I create a hierarchy of topic on the project manager pod or I must rely on the table of contents?

  Hello

  Can I create a hierarchy of topic on the project manager pod or I must rely on the table of contents? I use RoboHelp 9 (although I doubt that the version of the questions).

  Thank you

  Mary

  Hi Mary

  As you do this is by creating folders in the project manager, then create new topics in the files or move the existing entries in the records.

  If you work exclusively in the project manager, you are only able to move a single topic at a time. If you want to move a swarm of topics, open the pod of the list of topics and you can select as many as you want. Then drag the subjects selected to the folder on the project manager pod. Be a little careful when you drag. Often the mouse will pass over a tab at the bottom of the basket, and this can change their minds about you.

  See you soon... Rick

• RoboHelp 10 - is possible to change the icon of the TOC so that a 'book' in the table of contents. See the attached screen shot.

  In my current project for help, I have a set of topics that are specific to the use of our product in a country.  I want to change the table of contents of the specific book icon without changing all icons 'purple book '.

  Thank you.

  

  Hello

  Risk can be achieved, but if there is, it will have to be changed to code JavaScript and some "behind the scenes" files You would also be painted in the corner of having to do the same changes every time you generate the output.

  If anyone knows how to get there, it will be Willam. It will perhaps be pop and Advisor.

  See you soon... Rick