increase a value, then decrease

Similar Questions

• Structure of the event to increase a value while pressing a button

  I want to use a structure of the event to increase / decrease the value.

  It works with the 1 step.

  But I want to increase the value (steps of 200ms) continuously while I press the button with the mouse. If the user could increase the value a little more comfortly. And when I stop pressing the button the value stops increasing.

  I don't work...

  LV 8.2

  I got it!

  Thanks for any help. I have the end of the loop. The problem was that the structure of the event has allow access of the façade, so that the button was able to deliver.

  See attached vi!

• How to increase the value of prcesion in the ATG

  Hi all

  Is there some way I can increase the value of accuracy in the ATG, I have items with prices at 0.00 X format. But ATG round internally these prices up to 2 digits after the decimal. Is there a way I can expand this limit to 3 or 4 digits.

  Thank you

  Jitendra

  To increase accuracy, you can change the roundingDecimalPlaces property in/atg/commerce/pricing/PricingTools.

  Hope this helps

  Angelique

• Slider with own values then Grand Total bars.

  I created a type of Calculator in Flashpromanager.new which will be used to give the visitor an idea of how much money can be made on a Web site.

  The provision would be to use the sliders that the user could move to the left or to the right, then a dollar value seems based on the position of the cursor.  Another slider below or next to it would represent another value then, of course, a total area by adding that show sliders/values above.

  Shared thoughts or ideas are appreciated.  I worked with SwishMax and FLA in the past to create calculators, but I hit a wall with this idea.

  Once again thank you for your time in advance.

  Ok. This is a help file of Flash on how to set up a slider component: Adobe ActionScript 3.0 * use the Slider component

  Here's a tutorial on the display of the value set by a slider component: Code for food: the use of the Slider component: part 1

  For your third value display, the sum of the first two, you just need to add a line of code to the second slider to display the sum in a third textField.

  Who help me?

• Conditional compilation: "If the $$id cannot be set to a value, then the PLW-6003 warning message is reported.

  Hello

  So according to the documentation:

  Conditional Directives of Compilation using survey

  The directive of inquiry is used to check the compilation environment. The directive of inquiry is of the form:

  inquiry_directive ::= $$id

  A directive of inquiry can be preset as described in 'predefined help investigation with Conditional Compilation Directives' or be defined by the user. The following describes the order of the processing flow during conditional compilation is trying to solve a directive of inquiry:

  1. The id is used as a guideline for investigation in the form $$ id for the search key.
  2. Re-encoding algorithm is as follows: the string in the PLSQL_CCFLAGS initialization parameter is scanned from right to left, the search with id for a matching name (case sensitive); if it's recognized. The predefined survey guidelines are sought after; Done if found.
  3. Si le $$ id cannot be resolved to a value, then the PLW-6003 warning message is sent if the original text is not wrapped. The literal NULL is substituted as the value for undefined investigation guidelines. Note that if the PL/SQL code is wrapped, then the warning message is disabled so that the directive of inquiry not defined is not revealed.

  I take this means, if you $IF $$xxx.00 = $5 THEN... $END but have not set a $$xxx.00 with "alter session set plsql_ccflags" then you should expect an error.

  But I am unable to make this trigger, a warning, or an error, either by

  ALTER session set plsql_warnings = ' error: 06003. "

  or

  ALTER session set plsql_warnings = ' enable: all ';

  test configuration:

  SCOTT@ORCL> alter session set plsql_ccflags = '';
  Session altered.
  SCOTT@ORCL> alter session set plsql_warnings = 'enable:all', 'error:06003';
  Session altered.
  BEGIN
      $IF $$DEBUGON $THEN
          dbms_output.put_line('debug is on');
      $ELSIF NOT $$DEBUGON $THEN
          dbms_output.put_line('debug is NOT on');
      $ELSE
          dbms_output.put_line('debug is neither on nor off - DEBUGON IS NOT SET!');
      $END
     
  END;
  /
  show errors
  
  debug is neither on nor off - DEBUGON IS NOT SET!
  
  
  PL/SQL procedure successfully completed.
  
  
  No errors.
  SCOTT@ORCL>
  
  

  Miss me something; It is late after all; Thank you

  Jason

  The compiler warnings do not seem to work for anonymous blocks, only for named objects:

  dev1 > alter session set plsql_ccflags = ";

  Modified session.

  dev1 > alter session set plsql_warnings = ' enable: all ';

  dev1 > create or replace procedure p as
  2 start
  $3 $IF $DEBUGON $THEN
  4 dbms_output.put_line ('debug is on ');
  5 $ELSIF $ $DEBUGON $THEN NO
  6 dbms_output.put_line ("' debugging is NOT on");
  7 $END
  8 dbms_output.put_line (' ' in the procedure ');
  9 end;
  10.

  SP2-0804: Procedure created with compilation warnings

  dev1 > view the error
  P: PROCEDURAL errors

  LINE/COL ERROR
  -------- -----------------------------------------------------------------
  3/8 PLW-06003: directive of unknown inquiry ' $$DEBUGON '
  5/15 PLW-06003: directive of unknown inquiry ' $$DEBUGON '

  John

• Increase the value of a variable

  I start with a code number which has a length fixed, lets say
  AA32-BB32-CC129
  Basically what I'm doing, is to increase the value of each digit based on another number say 2.
  for example
  AA32-BB32-CC129 = CC54-DD54-EE341
  
  I guess I should use the "++" operator but do not know how to increase each value separately, including
  letters in the equation and how to ignore dashes. I searched and havn't found something to help. If you can help or point me in the right direction it would be much appreciated.
  Thank you

  Well, it's not otherwise delicate. It ' l give you an example and you walk through it. The first thing we do is to create a function for manipulation of this variable:

  function addValue(incr:Number) {}

  Incr will be what we add to the value of each number. Now, we separate the string into an array, using a separator so that each character gets his own position in the table.

  var tempArray:Array = changeCode.split("");

  Second, we loop the array and check every post to see if there is a number and if this is the case, add the incr value:

  for (var i = 0; i)<>
  If (! isNaN (tempArray, )) {}
  tempArray = parseInt (tempArray, ) + incr;
  }
  }

  Now join us just the table again and we're done!

  changeCode = tempArray.join("");

  I hope this helps!

• Order by a single value, then the rest as ascendants

  Hello
  
  I'm creating a list of values that lists a particular value first, then the remaining values in ascending order.
  
  That's what I have:
  
  Select d, name_id r name_desc
  of name_table
  order of decode (d, 'Charlie', d)
  
  
  Desired results:
  
  Charlie
  Alfa
  Bravo
  Delta
  ECHO
  
  
  Actual results:
  
  Charlie
  Alfa
  Bravo
  ECHO
  Delta
  
  
  Any suggestions are greatly appreciated!
  
  Thank you
  Matt

  Hi, Matt,

  A DECODING, as you have used, can affect each line to one of the 2 groups
  ' (1) ' Charlie '.
  (2) all other
  and sort according to these groups. 'Delta' and 'Echo' are both in Group (2), so if you want to 'Delta' in front of 'Echo', then you must add an additional element, a tiebreaker, to the ORDER BY cluase, as Blushadow does.

  If you know of some early impossiblly value, then you can get the right order with just a DRIVE BY post.
  For example, if all the name_desc values begin with a letter, you can use DECODE to map 'Charlie' somehting that precedes the first letter in alphabetical order, for example a space:

  ORDER BY  DECODE ( d
                   , 'Charlie'  , ' '
                                , d
                   )
  

• May not increase the value of data chart history but may decrease

  Hello

  In my application, I use 3 cards. I have 250 Hz sampling frequency on my system and I want to display a different number of seconds on my paintings.

  By default, the chart history data have 1024 points, which is second ~4.1.

  Now the problem is, if I put this value Let's say 100, it works well, is less points on the graph.

  But, If I try to back to 1024 or any value that is greater than the previous, it won't affect my chart.

  Graph will always display the lowest number of points of each value written in 'length of the graphic history ".

  Is in fact the value in the length graphic window, but it does not really affect.

  In addition, the problem is that it worked fine yesterday, but today it stopped working.

  I also have a VISA for VCP USB port, if this has something to do here, but I'm sure that's not.

  Thanks for the help and answers.

  Make sure your x-axis are the autoscale value.

• Brightness increases (fn + f10) and decrease (fn + f9) does not not on my G1 450 Probook

  Hi, my hp proobook 450 G1 brightness increased (fn + f10) and reduction (fn + f9) suddenly stopped working yesterday.
  But I cannot change sound using the
  [fn + f6] key and [fn + f7]
  
  I also have a problem on my left button (button left control). My up, down, right button works fine, but left button works as RET.
  What can I do now?
  someone help me please for this.
  Thanks in advance

  Anoy121 wrote:
  Hi, my hp proobook 450 G1 brightness increased (fn + f10) and reduction (fn + f9) suddenly stopped working yesterday.
  But I cannot change sound using the
  [fn + f6] key and [fn + f7]
  
  I also have a problem on my left button (button left control). My up, down, right button works fine, but left button works as RET.
  What can I do now?
  someone help me please for this.
  Thanks in advance

  450 G1 (fn + f10) brightness increase & decrease (fn + f9) suddenly stopped working yesterday. Check in the BIOS to see how the action key option is fixed to operate.

  "I also have a problem on my left button (button left control)." My up, down, right button works fine, but left button works as a backspace " This is a normal mode of operation for that particular key .

• Button, which initializes the values then releases control of more Boolean values

  I want to create a button that turns on a series of other buttons, but then releases the control to allow individual switching. The problem is that for my project I need to run the labview file continuously so when I change a control to true switch it keeps the value of the other true Boolean values. For example, I flick a switch to turn on all the lights at the same time but want to and then later have the power of the special lights individually. Then also have the option to turn off all the lights again with a click of a button. I can't understand this. I don't have much so far, sorry for that.

  Like this?

• I increased DPIsize but cannot decrease because only unable to see the OK button

  Once I have increase the DPI size to large I am unable to diminish - because the screen is so big that I can't access the OK button

  Hi LynBarchett,

  Follow the steps in the article.

  To increase or decrease the size of objects and text on your screen

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_use_large_or_small_fonts.mspx?mfr=true

• you want to increase the value of mouse (release)

  my script is...

  flash.external import. *; so, we can use externalInterface

  Import QueryString.as;   so, we can use the QueryString class

  var myPath:QueryString = new QueryString();

  assignVariables();

  custom function to handle all query string parameters

  function assignVariables() {}

  If the MyName parameter exists

  If {(myPath.parameters.m1)

  assign the text to the text MyName box

  unescape() will translate/decipher the characters in the url

  myName.text = unescape (myPath.parameters.m1);

  }

  If {(myPath.parameters.m2)

  thisUrl.text = unescape (myPath.parameters.m2);

  }

  If {(myPath.url)

  get the full url (including all parameters)

  thisUrl.text = myPath.url;

  }

  }

  var St = 12;

  thisUrl.text = st;

  my button script is-

  {We (Release)}

  St = st + 10;

  }

  There is nothing wrong with the code that show you it, although you shouldn't be put code on objects.  You must instead use the timeline.

  If the real problem is that the textfield does not display the increased value of TK, it is because you do not reassign the new value when you change

  {We (Release)}

  St = st + 10;
  thisURL.text = m;
  }

• How to increase the value of the queue for a server to avoid errors

  In the RESOURCES section of a config of ubb, "MAXQUEUES 700" stand for all servers queue or queue on each server?
  
  Because there are a lot of "ERROR: the Message Queue blocking warned childbirth, Qaddr = 583902 ' for a server in ULOG, what should I change the value of the queue of this server to a higher value to avoid this error? Change the "MAXQUEUES? If increase the queue for a server?
  
  Thanks for your kindly reply.

  MAXQUEUES is used to specify the maximum number of queues - not number of messages on a queue of (each).

  To solve your problem of blocking, you might consider adding servers (to accelerate the responsetimes).
  Another option could make synchronous calls if it would make sense for some application that you design.

• Increase the values for the new month

  In my mind, this should be a simple, but I can't go to my search term to get information on what command I need.
  
  I-> Nov forecast values and I want to copy the values of prediction-> Dec and increase 2%
  
  What commands would allow me to do it for all members of the dimension account 1 250 level 0?

  Yes, but you could also just use the following:

  SET CREATEBLOCKONEQ ON;
  
  FIX( FY08, Version1, Forecast)
      Dec = Nov * 1.02;
  ENDFIX
  

  The SET statement is necessary only if time is scarce and you have only the default.

  That said, an approach datacopy has other advantages, it's just faster to use the above as it does in one pass instead of two.

• truncation of value then print page in HTML field

  I have an IR (interactive report) that calls another IR
  IR-first I pass
  ====
  #EMPLOYEE_NUMBER # in P5_EMPLOYEE_NUMBER
  #EMPLOYEE_NAME # in the IR target P5_EMPLOYEE_NAME
  
  Second IR in the header of the region I want to show the value passed, so I wrote:
  ======
  < B > < = + 3 font size > number: & P5_EMPLOYEE_NUMBER.
  < br > employee name: & P5_EMPLOYEE_NAME. < here >
  < / police > < / b >
  
  I see the number of employees appear correctly, but my employee name truncated just LastName... the name of the employee contains lastname, firstname format employee but only first name is displayed in the header. There's a comma problem by passing the value between IR?
  
  Thanks in advance,
  Vishal

  Hello

  Passing values with the comma in the URL is problematic. Apex separate values by comma.
  Could help another post in the forum
  Escape comma in the URL
  Re: Passing of commas in URL
  Re: comma or a space in the URL with f? p = syntax

  Kind regards
  Jari