Increase the capacity of ReadNAS by adding another NAS

Similar Questions

• Is there a method to increase the capacity of a basic partition?

  Original title: hard drive partitions are reversed - the OS is on drive H, and drive C is almost empty

  I did a system recovery (destrutive). I deleted a partition. C and D remain as choices on the recovery console.  There are three choices. After recovery, I had Windows XP 1985-2001.  I upgraded to XP version 2000. After the upgrade to SP2, including all updates and is about to finish with SP3 and microsoft security essential, I discovered that the operating system has been installed on the wrong drive.

  Is there a method to increase the capacity of a base score, after that is already part of the formatting of the hard drive?

  Original title: hard drive partitions are reversed - the OS is on drive H, and drive C is almost empty

  I did a system recovery (destrutive). I deleted a partition. C and D remain as choices on the recovery console.  There are three choices. After recovery, I had Windows XP 1985-2001.  I upgraded to XP version 2000. After the upgrade to SP2, including all updates and is about to finish with SP3 and microsoft security essential, I discovered that the operating system has been installed on the wrong drive.

  Is there a method to increase the capacity of a base score, after that is already part of the formatting of the hard drive?

  ===============================================
  The following freeware might be worth a visit:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  EASEUS Partition Manager
  http://www.partition-tool.com/download.htm
  (Win 2000 Pro, XP, Vista, 7)

  How to resize your Partitions with EASEUS Partition Manager
  http://maketecheasier.com/how-to-resize-your-partitions-with-EASEUS-partition-Manager/2008/12/04

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I'm unable to download the updates for Adobe reader 10.1.1. Win 7 claims that I am connected as a guest when I am the administrator. disabled UAC and added another user still cannot update.

  I'm unable to download the updates for Adobe reader 10.1.1 victory win 7 claims I am connected as a guest when I am the administrator. disabled UAC and added another user still cannot update.

  Original title: win 7 claims I am logged in as a guest when I am the administrator. disabled UAC and added another user still cannot update.

  Here's how you can find your status:

  1. click on the globe to start, and then type the three letters cmd in the search box and press ENTER.

  2. Enter the following command and press ENTER:

  NET user "user %%nom.
  What do you see under "a Local group memberships?

• Increase the capacity of the hard disk for VM

  Hello

  I use ESX 4.0 with vSphere 4.0.

  When there is no snapshots more I would like to increase the capacity of the hard disk of the virtual machine in the menu to change settings / Hard disk. There is MS Windows Srv 2008 R2 64-bit installed.

  What is the right way to do it? Operating system, there is no problem with this increased disc? Primary partition will automatically increase as or what I have to do it myself later?

  There should not be problems with the guest operating system when you increase the size of the virtual disk. After the increase in size in the settings of the virtual machine, you need to resize the NTFS partition in the VM Windows 2008 disk management.

  André

• How to increase the processing speed by connecting to another computer via USB - USB cable

  Share laptop processing power. Windows 8, Windows 7

  Hello

  I was wondering if I could increase my processing power by connecting a portable alternative to mine via a USB to usb cable. If anyone knows how I would go to do that, or if it is possible I would like to know. I searched on google but not found all the answers.
  If this can help, my laptop is running Windows 8 32-bit preview developer, and the portable alternative is running as Windows 7 Ultimate 32 bit.
  Any help would be greatly appreciated.
  Thank you very much
  Mike

  Hi MichaelSenior,

  You will not be able to increase the power of a computer processing by connecting it to another computer via a USB cable or by any other means.

  In order to increase the processing power of your computer I suggest you check with your computer manufacturer to see if you can pass any hardware on your computer.

  Example: Increase the size of the memory on your computer or upgrading the processor etc...

  Hope this information helps you.

• Increase the capacity of Factory_Image (D)

  HP Pavilion a4327c Pc, Windows 7, 64 bit.

  Factory image (D), 10.7 GB has only 1.8 GB of capacity left.  Scale is still in blue.

  How can I increase the disk capacity or do I?  Player C has 243 GB of available space.

  Gene

  GSM

  GFS,

  You need not worry. It is supposed to be like this.

  It's only the purpose to hold a full recovery for your operating system Partition.

  Do not restore points save, or anything in that partition.

  Comment by Paul:http://support.hp.com/us-en/document/c01508532

  dialogues:http://h30434.www3.hp.com/t5/Desktop-Operating-Systems/HP-RECOVERY-D-is-nearly-full/m-p/679965#M33354

• Cannot increase the capacity of VMFS 5.54 data store

  Hello
  I added more discs to my series of raid 10 expanded the logical volume,
  size is available and can be seen by esxi, but cannot select the logical unit number to extend the data store.
  See screenshot
  
  The increase in size is not possible
  When the data store is on the same logical drive as the esx system?
  Thanks for your help.

  See you soon

  Freez3

  Increasing the local data store on the installation disc is not possible through the user interface and cannot be supported. At http://deinoscloud.wordpress.com/2010/05/03/how-to-increase-the-size-of-a-local-datastore-on-an-esxi4/ you can find a walkthrough on how to grow the local data store on ESXi 4.x with ESXi 5.0, you should not use «partedUtil resize...» "instead of fdisk (remove a recreate the partition) to change the size of the score well.

  For information about how to use partedUtil, see for example http://kb.vmware.com/kb/1036609

  If you are not sure, please after the release of

  partedUtil getptbl "/vmfs/devices/disks/"

  André

• Cannot increase the capacity of the hard disk

  ESX3.5 VI

  A VM, Widnows 2003 OS,

  I tried to increase the HardDisk1 from 8G to 15G, I saw the following:

  Capacity

  Drive Size (GB): 8,00

  Size maximum (GB): 250.85

  New size: 8 GB

  So I changed the 8 to 15 on the new waist line.

  OK the settings.  Now, when I go back to settings, it changed to 8G! What is c?

  OK the settings. Now, when I go back to settings, it changed to 8G! What is c?

  Are their active snapshots on this virtual machine?

• Increase the capacity of the drive to ReadyNas 3200 RN12P0000-100WWS

  Nice day!

  We have 12-Bay device (ReadyNas 3200 RN12P0000-100WWS) with 2 TB each disk (WDC WD2002FYPS)

  Firmware: RAIDiator 4.2.28.

  Could you please help me understand is possible to change the HARD drive in 3/4 to? And if it's possible could you please share the part number & model of HARD drive (Western Digital are preffered)

  The 3200 only supports drives that are more capacious 2 TB in bays 1-4. In the bays, 5-12 you are limited to 2 TB drives.

  There are a few limitations of expansion for RAIDiator - x 86 4.2.x

  1 cannot extend over 8 to over the life of the volume, so if the capacity of the volume is 1.8 to when your last made a factory default (erases all the data, settings, all that) you can't expand beyond 9.8 TB

  2 cannot extend beyond 16 TB. Do a factory default (erases all the data, settings, everything) with the disks in place. However, with for example 8x2TB and 4x4TB using X-RAID2 it would create a layer using 12x2TB then try grow to use the 2 TB remaining on 4 TB drives and fail. You could use Flex-RAID and create several volumes.

  Note our RN3220 and RN4220 do not have these limitations of expansion but they use a different OS and file system

  You could get a 3220 or 4220 and new disks and backup data from the former NAS to the new NAS then reverse backup jobs to use the 3200 for backups of your important data.

• How to increase the capacity of my hard disk?

  Original title: EXTENTION OF THE MAIN C DRIVE

  DEAR SIR.

  I INSTALLED WINDOW7 HOME PREMIUM (VERSON) IN MY PC. MY SYSTEM, THE BOOT DRIVE IS DRIVE C AND IT IS PARTITIONED 20 GB. THE DRIVE IS NOW CLOSE TO FULL. PLEASE ME TIPS HOW TO EXTEND THE DRIVE (INCREASED CAPACITY). I TRIED TO EXTEND THE SAME ACCORDING TO THE INSTRUCTIONS IN THE HELP SECTION. DURING RIGHT MOUSE CLICK INACTIVE EXTEND PARTION IS COMING ARE NOT CLICK. PLEASE HELP ME IN THIS MATTER.

  YOUR CUSTOMER

  P.K.DAS

  In disk management, you can not extend any partition unless there is unallocated space to the right of the partition.

  If you have another partition next to C then you need to use a third-party utility to shrink this partition and then move that unallocated space is adjacent to the C drive, allowing you to extend it.

  Disk management applications:

  GParted
  http://gparted.sourceforge.NET/

  MiniTool Partition Wizard
  http://www.partitionwizard.com/free-partition-manager.html

• PCoIP and how to increase the capacity of a sweet view customer image decoder

  We see a huge difference in this capacity between a zero client and sweet and I was wondering if anyone knew if it is possible to change this functionality on the soft client?  We find that the zero clients have 10 x vs the soft client capacity.  Basically, in a network scenario EXTENDED, we see that zero clients perform slightly better than the soft client and made the difference in ability of the decoder picture wondering.  The soft client is a ThinOS (Stratodesk) running on an I5 gen 4 processors and 2 GB of ram.

  An update... it looks like the piece of performance has nothing to do with the customer to view and is on the side of Stratodesk (need to use an image with a newer set of drivers).  If anyone is wondering what the ability to image decoder is here was the response of Teradici support:

  What exactly imagery decoder capability represent?

  The decoder of imagery is a chip in a zero client specifically designed to decode a data stream UDP PCoIP

• Increase the capacity of data store, which with the block size?

  Hello

  I am trying to expand my datastore 2 TB, I added a new lun 2 TB of the FC SAN TB 4 even and there is no problem adding this in the existing data store.

  But the existing data store is formatted in VMFS3 with a block size of 4 MB for a maximum file size of 512 GB. But when I try to extend the data store to select the size of the block is set to 1 MB and disabled.
  The measure automatically takes on the size of the original block or wil he get a block size of 1 MB? There are some > 256GB files on the existing data store and I think I'd get a strange behavior, if half of the data store is 4 MB and the other half is 1 MB blocksize.

  Can anyone confirm that the blocksize wil be the same for the measure?

  I can also make a second warehouse 2 TB one manually fracture the virtual machine on 2 data warehouses. is there any advantages or disadvantages to this approach?

  Don't you worry, add an item to an existing data store certainly will not change the size of the block. In any case, if it is an option that you can use two data warehouses, I would. With two distinct data warehouses that you will not only be able to spread the load on each of these LUNS but also avoid the complexity. With ESXi 5 (VMFS-5), a single LUN can grow up to 64 ~ to without needing extensions.

  BTW, a 4MB block size allows 1 TB less than 512 bytes.

  André

• How to increase the capacity of my iTunes iCloud?

  I have a big disco in my iTunes (probably 300 GB.) I recently paid $24.99 for iCloud music, but it's not big enough for my entire library. I also signed up for the iCloud 1 TB, thinking I could develop my ability to iCloud iTunes on that, but I can't find a way to do it. Is there a solution or am I stuck with what I have?

  iCloud is a device for synchronization and reflects the files on the computer

  If this iTunes library becomes too large for your primary drive - buy an external storage and move there and point iTunes to pick it up at the new location

• Trying to increase the capacity of virtual resource Flash, no host esx and no SSD is located

  In vSphere 5.5 WebClient, click host esx-> settings-> virtual Flash Resource Management.

  Then click on the button 'Add ability '. Empty the list of hosts/SSD devices.

  I followed the instructions with this announcement, but the list of hosts/SSD devices remains empty.

  https://communities.VMware.com/thread/464660

  Anyone know how to get around this problem? Thank you!

  It works indeed. You need to do some CLI commands to mark the device as a local and an SSD, but I outlined the steps in a post on my blog:

  http://tomverhaeg.nl/VMware-ESXi/VMware-ESXi-tag-a-device-as-local-and-SSD/

• I need 280 MB of storage on my iPhone. How can I increase the volume of storage of the iPhone?

  I need 280 MB of storage on my iPhone. The capacity is full. How can I increase the capacity of the phone?

  You cannot increase the capacity. You must remove things. Go to settings > general > storage & use iCloud > storage > storage management and see what about space.