Increase the length of the name of access policy
Hi allI need to use a longer name for the access (i.e. longer than 30 characters) policy.
Is it ok, if I change the length of the POL_NAME of the POL table column?
How can I increase the length of the name field in the client side access policy (i.e. in the administrative web page IOM and Console user)?
Kind regards
Chaturanga
Hi Chaturanga, like I said that I wasn't able to test that. Now I tested, it doesn't work. For groups, we in the same way that's why I suggested you like that.
You need to change xlWebApp/tiles/CreateAccessPolicyTiles.jsp instead of CreateAccessPolicyDetailTiles.jsp
I think that user774847 wrongly written JSP name.
Tags: Fusion Middleware
Similar Questions
-
Hi all
I created a strategy of access to users to autoprovision for MS AD, but I need to solve a problem. I do not know how to pre-populate e.g. name of the Organization (or other fields) of resource AD user in the access policy and prepopulate the plugins created for user AD form do not work here.
Please, could you help me to solve this "problem"?
Thank you
Milan
Access policies get a static value. You can't fill a field with an adapter. If you do, leave the field blank and put an adapter on the process shape to your field which must be filled by using code or logic.
-Kevin
-
How to increase the number of accesses to a list
Hello
I have a list with a lot of numbers, for example [234, 235, 236, 237,...]. If I want to access the first value in the list I can for example use the command: "put MyList [1]" and I get 234.
Now I need to have a script which increases the number of hooks 'MyList' by a unit (MyList [2];) MyList [3] etc...) in order to get 235, 236, etc... If I use the command "set" or "MyList [1] = MyList [1] + 1", with "put MyList", I get the value of 2, 3, etc. and not 235, 236...» that I need.What could be the path to the solution?
Thank you.Do you mean something like:
pStartingIndex property
property MyListon beginSprite me
MYLIST = [224, 336, 445, 224, 779]
pStartingIndex = 1
endon mouseDown me
Repeat with Index = pStartingIndex to MyList.count
put MyList [Index]
end repeat
pStartingIndex = pStartingIndex + 1
If pStartingIndex > MyList.count then pStartingIndex = 1
put "_" - Add pauses between the mousedowns
end mouseDown -
Disable / remove the IOM - OIM11g access policy
Hi Experts,
Audit on these forums, I realized it is not possible to delete an access DB constraints policy.
I read somewhere that it is possible to turn them off, but I don't understand how.
Any ideas?Hello
In order to disable the access policy... remove the role that are associated with. Since then, it is mandatory for at least one role... create and offer a dummy role...
You can also delete membership rule which is responsible for the users add to the group.
Concerning
user12841694 -
need to type .html at the end of the name of access on the web browser page?
Hello
My business Web site has a couple of pages without links in a menu or another page. They are used as pages of customer asset in which they can collect items that we take for them and arrange for them to be handed over to the
an address or an event.
In order to access it from the live site, to add .html at the end of the title of the page in the browser to search.
EG-
"our site" / client_assets (does not work)
"our site" / client_assets.html (works) ".
I thought it should work without adding .html
Here is a discussion with the same concern.
-
several resources configured by the access policy, allow multiple set to no
Hi Experts,
I have a problem with the automatic supply of the resource based access policy Ad and Exchange resource (or any two resources that are dependent on each other).
That's what I'm doing (11.1.1.3 bp2):
The user of the ad and the Exchange are the two auto-save, auto - prefill and do not allow several. Exchange depends on the AD Server (which assigns the user ad). Based on a rule, the user gets a role, having an access policy giving the user of the ad server and Exchange resources.
Because my AD Server/user implementation updates the user profile during deployment of the access policy is either revalued. At this point the resource Exchange has not any State yet, even if it is waiting on the AD resource to be configured. Accordingly, another Exchange resource is added to a kind of queue, no AD resource yet again in a wait state. As soon as the resource AD is supplied all the wait resource Exchange are provided leading to many Exchange resources.
On a side note, when a resource is assigned manually in the interface web IOM, that once all void tasks are made (or failed) the resource appears on the tab "resources" for a user. I think it would be more logical that this resource is listed immediately to the provision of status. Maybe it's to be able to perform a restore or validation occurs only after all the tasks are performed.
Bundle 4 Patch did not help at all.
Suggestions are welcome.
Kind regards
Jan Willem BeusinkHello
Thank you, we did the debug more. The real problem was setting a value on the profile of the user, by a membership rule added a user to a different role, leading to the evaluation of access policies. in the process of AD in combination with prepopulators on the Exchange form that take time to complete (a few seconds). If Exchange prepops where not ready before access where assessed to new policies, we got two exchange resources. We solved the problem by using (a variant of) your suggestion leaving the task of Exchange processes a UDF and adapt the rule to check for this field's initial membership.
Hi low (member of the team of Jan Willem)
-
Access Policy Update or Revoke AD does not
Hello
Problem:
I'm automating the AD Provisioning user via the IOM access policy. I am able to provision users in AD, but the user is not visible in the "resources" tab. If something is updated the IOM attributes and are not transfer of IOM to your user AD process. If I removed the user role, the user was not revoked the pub.
Configuration:
I created the following task to automate the configuration of the user. They are
(1) rule
Name: All users of the AD
Rule criteria: user login! = NULL
(2) role
Name: AD role
Member ship rule: all users of the AD
(3) access policy:
Access policy information
Name of access policy: access AD policy
Access Policy Description: Access AD policy
With approval: No.
Renovation of access policy: Yes
Priority: 1
Resources to be put in service by this access policy
Name of the resource: AD user
Revoke resource and entitlement (s) If is no longer applies: checked
Forms of process: AD user details
User AD form details are fed by pre-fill adapter in create and change < FieldName > fill in update operation.
Role
Name: AD role
I could not see any error in the log of AD connector file.
What I want to do something outside of politics to access AD to view resources in the resource TAB and also update the attributes of the user (process of change tasks are configured) and Revoke.
Help is greatly appreciated.What do you mean by this statement:
But the user is not visible in the "resources" tab
Do you mean that when you go to resource a user profile, then you can not see that AD user is provisioned to this user?
Check the checkbox "Auto Save" on "AD User" process Defintion
Add a user in this role explicitly in this role/groupResources to be put in service by this access policy
I hope you give values for AD server and the name of the Organization in the form of courses in this section.
Allow the newspapers as well as user AD spots are called or notAnd
To send the attributes changed to AD, you create corresponding tasks such as change of name, change last name etc in the defintion of user AD process and made its entry in the search for relaxation?
If yes then it will work only when you see AD user configured/active status in the profile of the user of resourcesLet me know the results
-
OIM 11 g r2 associated access policy
Hi all
I manually created a user profile with countries like India, whereupon, I created a role (developer) and policy based on the access rule (if country = us). So my question is whenever the country changes for us the role is applied, but the attributes of the parent RO (resource object) form impose great attributes in the user profile.I manually created a user profile with countries like India, whereupon, I created a role (developer) and policy based on the access rule (if country = us).
You don't create access rules-based policies... Actually attach you access policy to a role that has been assigned to the user under her reference to a rule. Therefore, the role of developer means country = US (or country = us... I think in the OIM 11 g case questions)
So my question is whenever the country changes for us the role is applied
Yes... whenever the country is changing for us the role is applied
but the attributes of the parent RO (resource object) form impose great attributes in the user profile.
The wording of this part is not clear...
If I understand correctly, you ask if the value specified in the form process of access policy takes precedence over the value specified in the user profile...Answer is YES...
So, if attached to the developer role access policy is published and the value of process shape is changed to say, UD_ABCD_COUNTRY = 'CANADA' (i.e., not the India nor coins the resource object will be UD_ABCD_COUNTRY = 'CANADA', even if the profile of the user USR_UDF_CONUTRY = en')
-
Increase the length of character allowed for wireless access PIN code
I need to know how to increase the maximum number of digits allowed when you enter the PIN method of Wi - Fi. I have a new home wireless router that requires a PIN 14 digits to access the wireless system. My Vista operating system allows only 8 characters maximum. I can not access my wireless network. Is there a solution of regedit?
Hello
Assuming that you mean by "PIN Wi - Fi", the wireless security password.
You must configure the security of the router to match the capacity of the computer.
Put the router to WPA or WPA - AES, and the computer will adapt.
In general.
Of the weaker for wireless security, more strong capacity is.
No security
Switch Off SSID (even has No Security. SSID can be sniffed easily even if it is turned off)
MAC Filtering___ (Band Aid if nothing else is available, MAC number can be easily Spoofed).
WEP64___ (Easy, "Break" by knowledgeable people).
WEP128___ (a little more difficult to activate, but "Piraté" too).
-------------------
The three above are not considered safe.
Safe starts here at WPA.
-------------------
WPA-PSK__(Very Hard to Break).
WPA-AES__(Not functionally Breakable)
WPA2___ (not functionally breakable).
, Note 1: WPA - AES the current interpretation level entry of WPA2.
Note 2 : If you use WinXP SP3 bellows and not updated, you will need to download the fix from Microsoft WPA2. http://support.Microsoft.com/kb/893357
Documentation of your devices (router wireless and computer wireless card) must indicate the type of security that is available with your wireless hardware.
All devices MUST be set to the same level of security using the same password.
Therefore, security must be set according to what is the best possible one of the wireless devices.
I.e. even if most of your system may be able to be configured to the maximum with WPA2, but a device is able to be configured for maximum of the WEP Protocol, to the whole system must be configured to WEP.
If you need more security and a device (such as a wireless card that can only do WEP) is now better security for the entire network, replace with a better device.
Definition of wireless security - http://www.ezlan.net/Wireless_Security.html
The fundamental differences between WEP, WPA and WPA2 - http://www.ezlan.net/wpa_wep.html
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Increase the length of the column - restriction key foreign vs MS SQL
Hello
I need to increase the length of the column (nvarchar) in some tables. Between these tables are foreign keys.
When I try to do it on MS SQL databases using the command as "ALTER TABLE TABLE_NAME ALTER COLUMN column NAME NVARCHAR (50) NULL" then I get the error like below:
Column ' dbo. TABLEA. NAME ' is not the same length or scale as the referencing column or the 'FKNAME' object depends on the column 'name'.
Therefore resume, on MS SQL I drop all constraints, alter table and re-create constraints.
When I do this same thing on the oracle database (oracle database a same pattern as MS SQL database, same fk, same tables, columns, etc.) using the command as "ALTER TABLE table_name MODIFY COLUMN NVARCHAR2 (40); " then length is change without any erros and I wounder t - it a correct situation on oracle? -all the constraints are enabled. Oracle checks the length of data to foreign key columns?
As I understand the error (ORA-02267: column type incompatible with the type of the referenced column) is the show that if the data type name is not equal between data tables not type length (?)
To reproduce:
1 create tables
CREATE TABLE "TABLEA".
(ACTIVATE THE 'NAME' NVARCHAR2 (20) NOT NULL,)
NUMBER OF "TEXTID",.
'PK_TABLEA' CONSTRAINT PRIMARY KEY ("NAME")
);
CREATE TABLE 'TABLEB.
(SELECT 'ID' NUMBER NOT NULL,)
NVARCHAR2 (10) "NAME."
NUMBER OF "WWW."
"TABLEB' ('ID') PRIMARY KEY CONSTRAINT
);
2. create the fk
ALTER TABLE TABLEB ADD CONSTRAINT FK_TABLEB FOREIGN KEY ('NAME') REFERENCES 'TABLEA' ('NAME');
On MS SQL, you get an error message on the same length of column ;) no
Thank you
Best regards
Mateusz
Whatever it is, the answer seems to be here: https://docs.oracle.com/cd/E17952_01/refman-5.5-en/create-table-foreign-keys.html
"Corresponding columns in the foreign key and the referenced key must have similar data types. The size and the sign of the integer types must be the same. The length of the string types are not necessarily the same. For the non-binary (character) string, the character set and collation columns must be the same. "
-
Can I access a layer or pageItem via getByName() if I don't know the name?
Hey writers,.
I'm trying to find a way to access a particular sub and/or groupItem layer via getByName(), but the name is unknown.
If I know the name of the element will be '_ Front', can I access using getByName? I did some research on the search for text within strings, and it seems like the best option I've seen is. indexOf(). However, I don't really know how to implement that in a way that works for me.
Basically what I'm trying to do is access groupItem if the name contains "forward." Any thoughts?
williamadowling wrote: basically, what I'm trying to do is access groupItem if the name contains "forward."
Something like this should work using the RegEx and. test() to see if the name contains the string.
function groupFindByNameContains() { var doc = app.activeDocument; var grps = doc.groupItems; var rgx = new RegExp("Front", 'i'); for (var i = 0, l = grps.length; i < l; i++) { var grpID = grps[i]; if (rgx.test(grpID.name)) { //alert("Found"); grpID.selected = true; } else { //alert("Not Found"); } } }; groupFindByNameContains();
Hope it helps your efforts and useful for your needs.
-
Problem:
1. How can I increase the space of name display in the form, material and specification of the nutritional profile?
2. how to increase display space for the name of the sheet in the history section at the top of the screen?
Thank you
Hello Nefertari,
You try to view more characters in these areas?
Each of these locations is plugable using custom plugin extensions.
For example, you can go into extensions/config/CustomPluginExtensions file and add the following nodes under the node FormatPlugins.
I think that the default values for the sites are set to 50 characters, so I had to be up to 100 characters (note NameMaxLength = parameter in the attribute FactoryURL 100).
It will be applicable to all specifications, if you need something more specific, you will have to create your own class where you can check the type of technique.
Make your own judgment in what concerns how enough will be the look on the screen after you increase the length to a large number, but you can always control the formatting in your own class.
See this older post for more information https://community.oracle.com/thread/2562965
Is that what you're looking for?
Dmitriy
.
-
maximum length of the name of the table.
Hi all
I think that the maximum length of the array and the name of column in oracle 11g is 30 characters.
I want to increase the limit I want to import a mysql database that is to have more big names in the table.
I can set the length of the name and the table column name?
Thanx.Before the migration, you can rename your tablename in MYSQL
http://docs.Oracle.com/CD/E12151_01/doc.150/e12155/oracle_mysql_compared.htmYou can't increase and change the length of the table
-
To access the nodes to copy the names to a list
I try to copy the names on the list at the top of this page in a BCC list below with the action of a button. However knowing the correct access to the loop variable 'i' node becomes very difficult if not impossible. Any suggestions? Thank you.
https://workspaces.Acrobat.com/?d=BfzTUdfSbgoGQjOsZUaj9Q
Good code for the button is:
Number of lines
var lines = resolveNodes ("form1. Page1.document.OnethruTen.OneThruFour.four [*] ");" count lines
var = rows.length nRows - 1; assign the number of rows to variable
Create table to contain the data sorted array [] [] []...
Var NomTableau = new Array ();
To loop through the number of instances of subform #4 get values for each textfield
for (i = 0; i<= nrows;="">=>
{
Fill the table with the values in subform #4
nameArray [(i*2)] = xfa.resolveNode ("form1. ("Page1.document.OnethruTen.OneThruFour.four [" ' + i + ' "] '). Owner.rawValue;
nameArray [((i*2) + 1)] = xfa.resolveNode ("form1. ("Page1.document.OnethruTen.OneThruFour.four [" ' + i + ' "] '). DF.rawValue;
}
Console.println (NameArray);
To loop through the values in the table and place them in the BCC list
for (i = 1; i<= nrows+1;="">=>
{
If (i<= nrows="">=>
{
this.resolveNode('form1.) Page1.ActionOwner.Table1._name [0]') .addInstance (1);
If (xfa.host.version< 8)="">
XFA. Form.Recalculate (1);
}
}
Form1. Page1.ActionOwner.Table1.resolveNode ("name [" + i +"]"). TextField1.rawValue = nameArray [((i*2)-2)];
Form1. Page1.ActionOwner.Table1.resolveNode ("name [" + i +"]"). TextField2.rawValue nameArray = [((i*2)-1)];
}
-
Hi, I need help with a very strange problem.
I have a Server 2003 domain controller to PC and all the domain user can access any shared folder of the server using IP address or FULL domain name.
So I joined a R2 of 2012 new server to the domain as a workstation normal and not as a new domain on the network controller, and the problem is that one cannot access a shared folder on the new server by using the IP, but can be accessed using the name of the computer.
My Admin user can access the folder using the IP address or the name comp. on any work, but the user of my AD position may not use intellectual property.
I can using Ping IP or name of the computer for every user of AD.
Please check the attached images.
When I try to access it using IP, it gives me the following error:
\\192.168.0.2 is not accessible. You might not have permission to use this network resourse. Contact the administrator of this server to fing out if you have access permissions.
Currently, there are no available connection server to process the logon request.
Hello
You may need to ask the question on the TechNet Forums:
https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home
Kind regards
Maybe you are looking for
-
Deployment of the CA certificate
HelloI have about 100 jobs and 100 users. I use the SSL certificate to our internal portal (intranet, ecc). The questions of whether SSL certificate by our CA internal. With IE and chrome is very simple to trust the certification authority because IE
-
How compaq 8200: my computer is blinking a red light permanently four times and do not start
My computer is blinking a red light permanently four times and do not start
-
Satellite L300 - 22L - where can I find Windows 7 (32-bit) drivers?
Hello. Where can I find the drivers for my laptop? Here is not for Windows 7!http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp
-
Buiding executable v8.6 vs 8.5
Whenever I have create an exe (application), I'm invited to "search the VI named"dialog.vi not found"" after having tried to run the .exe file. I'm following the following instructions, including the specific example files mentioned: http://zone.NI.c
-
I continually get ads from http://edge1.srv123.net/www/admin/index.php , but I can't find a way to block on explore.