Increase the length of character allowed for wireless access PIN code

Similar Questions

• Increase the length of the column - restriction key foreign vs MS SQL

  Hello

  I need to increase the length of the column (nvarchar) in some tables. Between these tables are foreign keys.

  When I try to do it on MS SQL databases using the command as "ALTER TABLE TABLE_NAME ALTER COLUMN column NAME NVARCHAR (50) NULL" then I get the error like below:

  Column ' dbo. TABLEA. NAME ' is not the same length or scale as the referencing column or the 'FKNAME' object depends on the column 'name'.

  Therefore resume, on MS SQL I drop all constraints, alter table and re-create constraints.

  When I do this same thing on the oracle database (oracle database a same pattern as MS SQL database, same fk, same tables, columns, etc.) using the command as "ALTER TABLE table_name MODIFY COLUMN NVARCHAR2 (40);  " then length is change without any erros and I wounder t - it a correct situation on oracle? -all the constraints are enabled. Oracle checks the length of data to foreign key columns?

  As I understand the error (ORA-02267: column type incompatible with the type of the referenced column) is the show that if the data type name is not equal between data tables not type length (?)

  To reproduce:

  1 create tables

  CREATE TABLE "TABLEA".

  (ACTIVATE THE 'NAME' NVARCHAR2 (20) NOT NULL,)

  NUMBER OF "TEXTID",.

  'PK_TABLEA' CONSTRAINT PRIMARY KEY ("NAME")

  );

  CREATE TABLE 'TABLEB.

  (SELECT 'ID' NUMBER NOT NULL,)

  NVARCHAR2 (10) "NAME."

  NUMBER OF "WWW."

  "TABLEB' ('ID') PRIMARY KEY CONSTRAINT

  );

  2. create the fk

  ALTER TABLE TABLEB ADD CONSTRAINT FK_TABLEB FOREIGN KEY ('NAME') REFERENCES 'TABLEA' ('NAME');

  On MS SQL, you get an error message on the same length of column ;) no

  Thank you

  Best regards

  Mateusz

  Whatever it is, the answer seems to be here: https://docs.oracle.com/cd/E17952_01/refman-5.5-en/create-table-foreign-keys.html

  "Corresponding columns in the foreign key and the referenced key must have similar data types. The size and the sign of the integer types must be the same. The length of the string types are not necessarily the same. For the non-binary (character) string, the character set and collation columns must be the same. "

• How to increase the length of line comment fields

  Hello

  as requested by a customer, we need to know if it is possible to increase the length of line comment fields.

  In fact, the size is:

  for allergens/intolerances/additives comment field-> DB limit = 256 characters; Web = 125 character limit

  for field nutrient comment-> to the defined benefit limit = 512 characters; Web = 250 characters limit

  We need to increase both limits up to 1000 characters.

  I hope my question is clear.

  Thank you and best regards.

  Michele

  Hi Michele,

  You can increase the size of the field or the size of the text for the field of comment allergens/intolerances/additives by following steps:

  1, go to \Web\gsm\BaseForms\UserControls\ctlComplianceContainedGrid.ascx, open the file

  2, go to line 102:

  3, edit theCellRepresentation.getTextareaCellEditor or the width of the field, save the file, refresh your page open or create a new page, then this field will change to the newly configured size

  Notes: the maxinum supported text is 4000 characters

  Unfortunately, the comment nutrient field do not support 256 characters. I suggest that submit you an improvement if it necessary business.

  I hope this helps.

  Thank you

  Jessie

• My organization is planning on increasing the length of password of 6 to 8 characters. Will what effect have on users?

  Users are invited to increase the length of their password the next time that they are required to change their password or is change immediately for all users at 6 characters or less?

  Hello

  Thank you for keeping us posted.

  I apologize for the delay in responding.

  I would have you post your query in the TechNet forums.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• Increase the length of the name of access policy

  Hi all
  
  I need to use a longer name for the access (i.e. longer than 30 characters) policy.
  
  Is it ok, if I change the length of the POL_NAME of the POL table column?
  How can I increase the length of the name field in the client side access policy (i.e. in the administrative web page IOM and Console user)?
  
  
  Kind regards
  Chaturanga

  Hi Chaturanga, like I said that I wasn't able to test that. Now I tested, it doesn't work. For groups, we in the same way that's why I suggested you like that.

  You need to change xlWebApp/tiles/CreateAccessPolicyTiles.jsp instead of CreateAccessPolicyDetailTiles.jsp

  I think that user774847 wrongly written JSP name.

• Using the button to increase the length of the line (an easy!)

  Hi I want to set a script to a button which will increase the length of a line (movieclip) by x amount each time.

  I tried to use this:

  on {(press)

  this.line._xscale = this.line._xscale + 5

  }

  .. that work, but also scales upward the value y of the line. How can I A) lock one end of the line in position and B) stop the value y of the line?

  Thank you! R.

  It is an alignment problem.

  If you go into the symbol of the line, select the line and line up at the high point and left (so the collimator is in the upper left corner of the line) the top/left corner of the line will always be in the same place, when you change its width.

• When trying to start the disk check procedure, I get the answer, "cannot open volume for direct access. How can I fix?

  I get the above answer everytime I turn on the computer. (This is with AutoCorrect blocks checked). If I leave blocks unchecked, it follows a procedure 3 pass without rebooting and does not produce a result.

  * original title - to try to start the procedure of checking disk I get the answer, "cannot open volume for direct access. How can I fix? I ran the GET Microsoft virus check tnd an own result.*

  The application-specific permission settings do not authorization for the application server COM with the CLSID
  {DCBCA92E-7DBE-4EDA-8B7B-3AAEA4DD412B}
  the user NT AUTHORITY\SYSTEM SID (S-1-5-18). This security permission can be modified using the Component Services administrative tool.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_comp_exp.mspx?mfr=true

  In the opposite case

  http://blog.ray1.NET/2008/01/WinXP-SP3-DCOM-system-error-dcbca92e.html

  http://TechNet.Microsoft.com/en-us/network/bb545879

  http://www.blackviper.com/wiki/Network_Access_Protection_Agent

• Increase the length of a variable at > 50 characters

  Hello

  I develop a training where I want users to enter comments, maybe give them up to 100 characters and then allow them to review he comments with a sample. I would like to use an input text field to capture the text of the user, store it in a variable, and then display it on the next page. The problem is that when the variable is displayed in a text box on the next page, the text is truncated.

  I am aware of the menu for variables where you can specify a length, but whenever I do that, the value that I choose is not implemented.

  Any help?

  Nate

  The only way I know is to change the length of the inserted variable, which can be made only when you insert the variable with the X button in the role of composition of the text container properties panel:

  

  

• Increase the length of size and recorder circular buffer

  Hello again!

  First of all:

  I have a problem with the circular buffer.

  I was able with a sampling frequency of 1000 Hz I used 6 circular buffers, each with a size of buffer for 30 minutes. It was no problem for the PC. I do not have such a high sampling rate, but I need a buffer size that is larger, something between 90 and 120 minutes with 8 pads. so I decided to reduce the sampling rate of what I need, it's 50 Hz. Because I reduced the sampling rate to 1/20 of the original sampling frequency I thought that a buffer size of 120 minutes should be possible.

  Now, after trying the new sampling rate, I still can't use the 8 pads with more than 60 minutes. Any ideas why I had this problem? How can I provide a larger buffer, no possibility?

  Second:

  I use the recorder for display. I would like to display voltage in the long term. With the recorder the maximum length is approximately 3.5 hours. How can I view on longer periods? What I need to display the length in days. Is this possible? Perhaps with the other modules or almost?

  That's it for now, thank you a lot for the useful tips.

  Good day!

  Good bye

  The maximum time width of the graphic recorder or Y/t diagram is a function of memory (RAM) on the computer, the number of channels to display and the sampling frequency. Dynamically, the memory is allocated to the maximum. To avoid using RAM available on the computer, DASYLab is limited to half of the memory of the computer.

  That being said... How you appear more time? You can reduce the number of samples using average or separate modules - in effect, reducing the sampling frequency. Alternatively, you can consider if the trigger on demand and a relay may be able to effectively reduce the samples for data to slow evolution.

  Some clients have two screens high resolution on a shorter and more low resolution over a longer period.

• Torch: OpenVG will increase the speed in real time for the scaling\rotating image?

  Hello!

  I have such a problem. I need to view the satellite map (not vectored) with the possibility of scaling on in real time. Map is a bitmap either 1500 x 1500.

  I'm doing the scaling that requires 480 * 360 for operations return the second part of the map on a defined scale, but it is not enough - it is slow to make good zoom in real time.

  Maybe someone knows is it possible to increase the speed by using OpenVG? (OpenGL is not supported in the torch)

  Thank you for your attention.

  Realization of OpenVG for play ~ 1500px x 1500px images, rotation & them staggering realtime works pretty fast.

  So if someone needs of fast image processing to use OpenVG

• How to change the Windows settings to allow for the camera driver must be installed

  My laptop doesn't recognize my digital camera. The correct software is responsible for the camera. An error message indicates that Windows will not allow access to the driver. How can I change the settings in Windows so that the driver for the camera is recognized?

  Help please!

  Hi Brian,.

  1. are you able to install all device drivers?
  2. which antivirus program is installed on your computer?
  3. don't you make changes to the computer before the show?

  The question seems to be as a program is blocked.
  I suggest you perform the clean boot and check if the problem persists. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  I hope this helps.

• BlackBerry Smartphones how can I increase the maximum file size allowed on the media?

  Whenever I have record video using the video camera, after a very short time it will stop recording and gives a message 'maximum size of the file reaches. I've adjusted the settings to save in 'Normal' mode, but while recording appears in last a short time, the result file size is way too big to be able to easily send to contacts. When you use the MMS mode the recording time is much too short. Is it possible to increase the maximum allowed size of the file so that a resulting video would be about 3-4 MB or less?

  You can download any software video conversion on the net. just try this one "Freestudio".

• How can I increase the space put into service for a data store in vSphere

  Using vSphere client 4.0.0 (208111) and vCenter Server 4.0.0 (162856)

  I have a 850 GB data store set up that shows only 525 GB configured.  My users are bumping into the ceiling and I need to give them more space.  I can't find a setting that allows me to do this.  What are my options here?

  Thank you

  How many Virtual Machines on your ESXi host? What is the size of the virtual disk to a virtual machine that has the problem? You can change the size of the disk in editing parameters for the virtual machine with problems?

• The user can see all the resources, not only allowed for access to its organization

  Hello
  
  I put three self-serviceable resources resources authorized for a specific organization. So if I click on resources authorized for this organization, I can see only these three...
  
  When a user of this organization click on request for new resources, all self-serviceable resources are listed to the user, not only allowed resources. I thought that the user can only see authorized resources...
  
  If I connect as sys admin and request resources for a user of that organization, I can see that the three resources allowed.
  
  I saw the sql statement that run of IOM to inventory resources:
  
  Select
  obj.obj_key, obj_name, obj.sdk_key, sdk_name, obj_order_for, obj_auto_prepop, obj_type,
  obj_allow_multiple, obj_self_request_allowed, obj_autosave, obj_allowall,
  obj_rowver, obj_note, obj_autolaunch
  to obj obj
  outer join Software Development Kit sdk left obj.sdk_key = sdk.sdk_key
  where obj.obj_key in
  (
  Select distinct obj.obj_key from obj obj
  outer join Software Development Kit sdk left obj.sdk_key = sdk.sdk_key
  Left outer join acp acp on obj.obj_key = acp.obj_key
  OBA oba on obj.obj_key = oba.obj_key left outer join
  where
  (
  obj.obj_self_request_allowed = '1' or obj.obj_key in
  (
  Select obj_key in acp where act_key in
  (
  Select act_key
  of the usr
  where usr_key = 5 and acp_self_servicable = '1'
  )
  )
  ) and
  obj.obj_order_for = 'U' and
  (obj.obj_type ='Application ' or obj.obj_type ='Generic ') and
  obj.obj_key not in
  (
  Select pop.obj_key
  pop pop, pol pol, pog pog, PMU PMU, usg usg
  where
  pop.pol_key = pol.pol_key and
  pol.pol_key = POG.pol_key and
  POG.ugp_key = UGP.ugp_key and
  UGP.ugp_key = USG.ugp_key and
  USG.usr_key (5) and
  pop.pop_denial = '1'
  ) and
  obj.obj_key not in)
  Select distinct obj.obj_key
  to obj obj, obi obi, ost ost ouedraogo ouedraogo
  Join external orc orc left on oiu.orc_key = orc.orc_key
  where
  OIU.obi_key = Obi.obi_key and
  OIU.ost_key = OST.ost_key and
  Upper (OST.ost_status) "REVOKED" <>and
  OBI.obj_key = obj.obj_key and
  OIU.usr_key (5) and
  obj.obj_allow_multiple = '0'
  ) and
  obj.obj_key in
  (
  Select distinct obj_key
  pkg
  where pkg_type = 'Configuration '.
  )
  )
  
  As you can see in the query above, if I change the excerpt below the result is what I expect.
  
  ...
  obj.obj_self_request_allowed = '1' AND obj.obj_key in
  ...
  
  I missed to set something or something wrong?
  
  Thank you
  
  Renato.

  Sorry, but I do not understand your last answer. You mentioned the following:

  for option B, even if option A is not checked, you can set automatic ask for organization when assign authorized resources.

  -isn't that what you wanted? You define the resource resources as authorized in all organizations whose users can request this resource. I implemented this and it works fine. This works for both types of applications. (a) my resources-> request for new resources and b) applications-> resources-> Grant resources.

  In the case of b, according to the Organization to which the user is selected, the resource is displayed. all resources are not displayed.

  So the solution is to uncheck in RO and bring the resource authorized specific organizations as resources in self down. It should work fine. Let me know your exact problem if it works that way.

• How to deploy the length of report viewer for projects developed in Visual Studio 2015

  Hello

  I converted the project VS WinForm from 2013 to 2015 VS. Once I installed it on the client, Microsoft.ReportViewer.WinForms 12.0.0.0 request report viewer.

  With VS 2013 projects Report Viewer 2012 DURATION worked well.

  I was not able to locate any new version of the Runtime to report viewer.

  Any advice?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum