Increase the memory by deleting the old service paks.

Similar Questions

• Windows vista - 8007371-b code keeps coming up and I have the windows service pak 2

  My Windows Vista Home Premium will not update. 8007371b code keeps coming up and I have the windows service pak 2? Just after the service Pak2 it says "Upgrade Windows Vista"

  These are the following updates will not install:

  A security update cumulative for the ActiveX for Windows Vista (KB2618451) stop bits
  Update security for Windows Vista (KB2644615)
  Update security for Windows Vista (KB2658846)
  Update security for Windows Vista (KB2676562)
  Update for Windows Vista (KB2679255)
  Update Rollup for the ActiveX for Windows Vista (KB2695962) stop bits

  I tried to install them separately. I also used the Microsoft Fix thing too. Nothing works. Can someone please help! Thanks :)

  Hello
  Are what Microsoft Fix you referring?
   
  If you haven't tried the following and then try the same thing and check:
   
   
  Method 1:
  You can try the steps in the following article and check if it works:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  Method 2:
  The steps in the following article to see if it works, try:
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows
  Let us know the result!

• Is it safe uninstall the old service packs when new ones are installed?

  I have Microsoft's latest Pack Service, can I uninstall old Service Packs when news are installed?

  I have Microsoft's latest Pack Service, can I uninstall old Service Packs when news are installed?

  Do you see even registered?
   
  In general - you should leave well enough alone when it comes to patches.  Microsoft does a job just to install only the parts of a patch which aren't already in place - so, even if you started without service pack, got SP1, SP2 and SP3 as well as 100 + post-SP3 fixes - this is not as if the use of space was exactly cumulative...  The overlap himself would have worked.

• Can't seem to increase the end service disc.

  OK guys, I can't resize the XP vm that was created a few months earlier.

  

  At the moment there are no snapshots:

  

  I made sure that there is not in the data store:

  

  I tried to create a data store and delete for sure, and yet I can't resize it.  There are other virtual machines on this host.  A windows 2008 Server and it can be resized, so I know this isn't a thing of role permissions:

  

  I'm under ESXi 4.1, vCenter Server Version 4.1.0 build Vshpere 345043 and Vsphere Client Version 4.1.0 build 345043.  Any help would be greatly apprieciated.

  This is probably because it is a virtual IDE drive. I recommend that you use the converter to resize the disk and - step 3 - select the Buslogic SCSI controller for the target. In this way, you can resize the virtual disk in the future if necessary.

  André

• According to 11.2.0.2 former services (listener, asm) keep starting the old House

  Hello
  
  I spend just an instalation Oracle 11.2.0.1 (Solaris 10) 11.2.0.2 and everything was up and running until I restarted the server and now new services (listener, asm, database) do not start. The only services began are the listener and the asm, but the 11.2.0.1 old House.
  
  Is there a required additional configuration in order to disable the old services and implement new?
  
  Thank you

  ashum wrote:
  After activating the NSO, he is now start automatically after restarting the server.

  Should I worry about both nmz instances? How can I disable the old one?

  Good

  You can disable / stop the old House

  run

  ORACLE_HOME/bin/ccr/emCCR stop

  Check the crontab, I think that that's where

  If all you're questions are answered thinking mark the thread as answered to avoid confusion, other members

  See you soon

• Can I remove the old updates installed to save space on my computer?

  wondering if I can remove the old service updates from my computer to free memory space is low

  You can not remove the old updates service that would leave you vulnerable and in a pre patched State.

  However for Windows XP only

  Cleaning after installation of SP2
  http://aumha.org/win5/a/sp2faq.php#after

  and/or

  XP SP3: Post Installation Cleanup
  http://aumha.NET/viewtopic.php?f=62&t=33827

  This isn't for Vista - after each update, Volume Shadow Copy service backup only the updated files. With Vista, is a differential backup, rather than a full backup and uninstalling files in Windows XP.  This safeguard mechanism is used to save disk space.

  TaurArian [MVP] 2005-2011 - Update Services

• We will seek answersmy updates microsoft continues by saying that I have to install window vista service pak 1

  When I check the update of windows told me that I must go down load windows vista service pak 1, so I do the download and in a few days it says I need to download the same service pak 1.  I can't get to download service pak 2 because I repeat that I need service pak 1.

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you here what Service Packs, if any, are already installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• Can I increase the memory on my old Satellite Pro P100?

  I have a Satellite Pro P100 (P6PA4E-002001EN) with only 512 MB of memory and the desire to know if it can be increased and if so what memory should I buy and it is easy to open the machine and adapt?

  Hello

  You can increase the memory on this laptop amazing plu of 4 GB of RAM.

  RAM modules compatible that you can use to upgrade:
  PA3511U - 1 M 51 (Kit of memory 512 MB DDR2-667)
  PA3512U-1M1G (memory 1 GB DDR2-667 Kit)
  PA3513U-1M2G (memory 2 GB DDR2-667 Kit)

  Check the underside of your laptop and there should be probably set with a cover of Ram screw. Remove it and you will have access to the memory locations.

• Deleting a group to a TDMS file increases the file size

  Hi all

  I was searching for information on how to delete a group in a TDMS file. Apparently this is not a simple task as I thought because firstly, it is necessary to convert the TDMS file in a TOC file, remove the group from the TOC file and finally convert the TDM in PDM file. There is a sample project really nice here (I have attached it in the post anyway!).

  This project works very well. Indeed, I am able to remove the group from the PDM file. However, I realized that perform the deletion process increases the size of the file (about 4 times). If you are viewing the PDM with the PDM file - file Viewer.vi you realize that several strange properties have been added to each channel of all other groups. I assumed that this is partly the cause of the increase in size.

  Anyone know why this is happening?

  I'm using LabVIEW 2014 and I downloaded the project for 2014 LabVIEW.

  Any help is appreciated to higlhy.

  Best regards

  Diego Ballen

  The old way was to read each group that you want to save and write to a new file. The fundamental problem is that TDMS format has been optimized for speed and no memory efficiency, which can cause a lot of complications when you seemingly simple things - like the deletion of data, or reading the data of the file.

  That is why NEITHER came up with these new features. If you're stuck with an earlier version, you can always write your own function to do the same.

  Mike...

• How to increase the video memory on my Satellite 1800-254?

  A friend give me a Toshiba satellite 1800 Lalonde - 254 s for use only watch movies for my kids. With graphics memory, it has its impossible to reproduce movies, so I increased the RAM to 512 MB graphics memory is 8 MB. How I increase the graphics memory? Is it possible?

  Thank you very much

  Titanico

  (Excuse my English, I use a translator)

  This old laptop has a graphics card with shared memory. In other words, when you have more RAM inside more memory will be used for graphical operations. According to the specifications of the laptop this old notebook was shipped with 128 MB of RAM, but can be improved up to 512 MB.

  Trying to find internet modules two PC100 256 MB with part number PA3069U - 1. 25 M and update.
  That's all what you can do about it.

• I want to increase the memory on the 2210CDS Satellite

  I have an old Toshiba Satellite 2210CDS/6.0 I want to give to charity. Until I do, I wanted to increase the memory from 64 MB to 128 MB minimum, because he seems excessive paging of memory under Windows 98, it slows down a lot too.

  The original 64 MB memory module is marked PC100-222-62, Toshiba p/n THLY6480H1FG-80. I ordered since equivalent barrettes memory 128 MB (PC100-222-620) from different sources. They fit well, but the memory is still limited to 64 MB, as evidenced by the page to configure the BIOS and Windows pages 'system '.
  The computer has only one memory location. What I am doing wrong?

  Ruud Hartog

  Hello

  This laptop is very, very, very ;) old

  However, the laptop can be improved up to 160 MB. 64 MB internal memory + 128 MB additional memory module

  The Toshiba recommend using these modules:
  128 MB - PA3005U
  64 MB - PA3004U

  Usually after upgrading the BIOS should automatically recognize the module.

• Dual processor Z600 increase the size of the memory

  Looking to increase the memory of 8 GB (2x4gb) by processor, 12 GB or 3x4Go by processor. The machine has 4 DIMM with part number 591750-571 1 and I have been cited with a reference FX621AA number for the DIMMS 2 again.

  591750-571 - HP - 4 GB (1X4GO) 1333 MHZ PC3-10600 CL9 ECC REGISTERED DDR3 SDRAM DIMM

  and

  FX621AA - HP - 4 GB 1333 MHZ PC3-10600 CL9 ECC REGISTERED DDR3 SDRAM DIMM (1X4GO)

  Everything seems ok with the two specs, but would be nice for this mixture of memory to be confirmed. Thank you.

  591750 571 is a spare part / service part number. Part # FX621AA is the part number "detail" that is sold in stores. Chances are it will be tagged with the spare room once you get it in your hands.
  
  There is no problem with the installation of these modules of FX621AA in the running system of the 591750-571-the specs for speed, feature of the ECC and check that all game, you receive the right RAM for sure.

  Part FX621AA # is noticed that the good original piece for this system with the specifications of your RAM by the quickspecs, just in case you want a double:

  http://h18000.www1.HP.com/products/QuickSpecs/13277_na/13277_na.html

• How can I go into a used computer and change the username to the mine and to make a new password or delete the old user of my computer completely? (preferably get rid of the former user)?

  I need to know how to solve this problem in detail please

  I bought a computer with windows xp service pack 3 and when I start it the old user keeps popping up asking for a password. I want to know how to enter and change the username to the mine and to make a new password or delete the old user of my computer completely (preferably get rid of the former user)?

  See the following link to delete the account: http://support.microsoft.com/kb/279783

• How to remove old Services of FXM of the dashboard of the EU in the FMS

  How to remove old Services of FXM from edge of the EU in the FMS?

  We have removed the few services of FXM, but again, we can see that in the EU in FMS dashboard. Please suggest measures to clear those FMS.

  Hello

  End-users objects exist generally in the administration server > data management (note the fxm and fxv nodes)

  

  but they may exist in other places (according to what dashboard they appear on).

  The caution would be to open a support case and support check that right objects are deleted in the right place in the data tree.

  Hope this helps

  Golan

• Emails (1) recent blackBerry Smartphones suddenly deleted from Blackberry - Synch (2) tries to remove the old entries on computer calendar

  Two problems, no idea if they are related or not. I had a Curve 9300 for 18 months - no major problems.

  (1) this evening it all of a sudden all messages deleted more than a few days old f. It is used to transport e-mail maybe 3-4 weeks. No idea why. It happened all of a sudden.

  (2) I've been sync using BB desktop between appliance and MS Outlook 2010 for 18 months. Synchronization suddenly a few months ago tried to delete all the old entries calendar on my computer. I worked hard that by putting the synchronization of calendar configuration "mode 2", 'All the entries in the calendar' with a filter defined on synchronize start dates after 01/01/2013. It worked. But all of a sudden tonight trying to remove almost 100 entries of (recent) Agenda of my computer.

  Any ideas, anyone? Thanks in advance...

  Hello

  Mr_Numbers_135 wrote:

  (1) this evening it all of a sudden all messages deleted more than a few days old f. It is used to transport e-mail maybe 3-4 weeks. No idea why. It happened all of a sudden.

  Here are some tips to use:

  • KB02843 What is the function of low memory manager on the BlackBerry smartphone
  • KB14320 How to maximize space and power battery life on the BlackBerry smartphone
  • KB14213 Call logs, SMS text and email messages are deleted from the BlackBerry smartphone

  Mr_Numbers_135 wrote:

  (2) I've been sync using BB desktop between appliance and MS Outlook 2010 for 18 months. Synchronization suddenly a few months ago tried to delete all the old entries calendar on my computer. I worked hard that by putting the synchronization of calendar configuration "mode 2", 'All the entries in the calendar' with a filter defined on synchronize start dates after 01/01/2013. It worked. But all of a sudden tonight trying to remove almost 100 entries of (recent) Agenda of my computer.

  I suggest this thread:

  • http://supportforums.BlackBerry.com/T5/desktop-software-for-PC/cleanly-quot-starting-over-quot-with-...

  It begins with a process to start properly and there is an exchange of views, and there is also a post (15) with links to earlier versions of the Software Desktop, if those who are needed. Note that this is not, by any means, guaranteed to work... but it worked to much to solve the problems they have.

  Good luck!