Increasing memory usage

Similar Questions

• Y50-70 display blinking rate increases exponentially on 40% memory usage

  I upgraded my new laptop of lenovo Y50-70 to win 10 about 1 month ago. Since that time I noticed that my screen would now and then Flash. I looked for a solution and I had a lenovo... Web site deactivation of 2applications in the Manager of tasks in safe mode. He helped abit because the flicker rate slowed, but it never disappeared.

  I investigated the system of som time now and I have found that when the memory usage goes up to about 40% flickering display rate increases exponentially. I have 8G of RAM, GTX 960 2 GB graphics card so I don't expect a problem when running my usually of programs. I won't even do games even if I know that the machine can handle but I guess it would be much worse if I tried.

  Please give me a permanent solution.

  Note from the admin; type of system added to the subject line

  I can't say for sure, but did you ask al updates to the Lenovo Web site for your system?

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/Lenovo-y-series-laptops/Y50-70-Noteboo...

  You can download and apply all updates Win 10, including the latest version of the BIOS.

• Explorer.exe increases the memory usage

  Original title: Explorer.exe constantly increasing memory size... Windows 7 Pro 64-bit run on Lenovo Edge 73 i5 - 4570S / / 4 GB RAM / 500 GB HDD / PC Deskstop

  Dear support,

  Kindly help me on this issue.

  1. when I just reformat the PC and load back the OS (Windows 7 Pro 64-bit) and install dropbox version 3.0.5.

  2. then the explorer.exe constantly increasing memory size until the entire screen freezes.

  3. I had to install kaspersky version 10 with license and Malwarebyte s virus scan and to... etc... Once the scan is not virus on this PC.

  So now, what can I do on this issue?

  I need your help... I did it several time reformatting also have a question...

  Thank you and best regards.

  Scofieldbee88

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that explorer.exe increases the size of the memory and the screen freezes. I'll be happy to help you with your query. Let me ask you;

  1. When was the last time it was working fine?
  2. You did it no particular change in the computer before the show?

  The issue could be related to any recent change in software or hardware on the computer or any third-party software conflict. In addition, it is recommended that you use unique security software at a time so that he would not come into conflict with other firewalls.

  We will follow the methods below and check.

  Method 1: Run the troubleshooter of Performance.

  To optimize the performance of Windows, try to use the resolution of Performance problems to automatically find and fix problems. The resolution of performance problems check issues that could slow down the performance of your computer, such as how many users is currently connected to the computer and if multiple programs are running at the same time.

  Open the performance troubleshooting utility by clicking the Start button , and then click Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under system and security, click check for performance issues.

  Method 2: Start the computer in safe mode, and then perform the clean boot in order to avoid any conflict of third party software.

  Step 1: Start the computer in safe mode.

  See: , start your computer in safe mode

  Step 2: Perform the clean boot

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Additional information:

  Optimize Windows performance

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Memory usage increased on ESXi 4.1 for ESX 4.0

  Hi all

  Recently, we migrated about 130 virtual machines to a Cluster of U2 ESX 4.0 to esxi 4.1 u1 cluster and noticed that the memory usage is very high on the hosts compared to 4.0.

  The band u2 4.0 was 255GB of RAM between 9 guests and the new cluster has 355 GB of ram between 7 hosts.

  use of the memory of the 4.0 u2 was about 60-70% and now on 4.1, on the use of 90%. Can someone please explain this. It is more difficult to understand that there are 100GB more RAM available on the new cluster, but its use all this.

  ESX 4.0 host u2 were HP BL460 G1 - 32 GB each

  ESXi 4.1 u1 are HP BL460 G6 - 48 GB each.

  Thank you

  According to me, IT ' was all about GST (Transparent Page Sharing) and your new generation of CPU. This phenomenon is independent of the version of vmkernel. Let me explain briefly,

  New processor generation, such as Nehalem, have a feature called hardware support memory management unit, which includes a buffer cache called TLB (Translation Lookaside Buffer). I will not dive into the details but if vmkernel detects that your CPU have this kind of functionality, he decides to use pages (2 MB) memory instead of partial memory (4 KB) pages and also do not use GST as long as a restraint on resources of memory occurs. This is why you have a higher memory usage that you expect to see.

  To work around the problem (not a best practice but it is necessary), you can force vmkernel to work with small pages and trigger the GST. There is an advanced for this setting.

  • Mem.AllocGuestLargePage= 0

  You can try this on a test environment and see if it works for you.

• creeping memory usage when you use NEITHER-9477

  Hi, I write output digital (4 outputs line, on request, 10 updates per second) in a loop using the DAQ assistant. When I use a NOR-9477 as the device output application use memory increases about 10 MB for 15 minutes and will eventually run out of memory.

  If I use a USB6009 as the output device, the memory usage is stable. Same code is used, the only difference is the physical channel.

  Any suggestions as to what might cause this behavior?

  

  Thanks for the tip Ravensfan.

  To distill the code down for the most part, one of the two VI is leaks memory - the NOR-9477 one. The other not...

  In any case, the solution to my problem is to convert the express VI DAQmx code.

• How to increase memory Application of BlackBerry Bold BlackBerry Smartphones?

  Can someone please let me know as how can I increase the "Application memory" my camera 9000 (Bold) BlackBerry?

  Whenever I install a new app he consumes the memory of the application from my device. Can I install the new application on the device memory which can be expanded, I think.

  Thank you

  Arnesh Kumar

  Hello and welcome to the community!

  There are three types of potential memory on a BB: 1) application memory, the device memory) 2 and 3) Media/SD memory card

  Application memory - it is the most important; It is protected (not available to the user), dedicated and (fixed size) space as the destination for the installation of applications (more a few storage applications, overhead and other costs). You can't touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can install only here... There is no other choice.

  The device memory - it is space on your BB you can touch these files, images, media, etc. In general, it is not very big, but it is available.

  Memory card SD/Media - is what it says... your SD card to store files, media, photos, etc.. It can be as large as your BB OS can support... see this KB:

  • KB05461 Sizes of card MicroSD taken in charge by the BlackBerry device software

  On some devices/OS levels, you can see 'Free file' (Options > status), I think this is equivalent to AppMemory. You can see on other devices, all the memory usage levels three (Options > memory). Here are some tips to use:

  • http://www.BlackBerry.com/BTSC/KB15345
  • KB02843 What is the function of low memory manager on the BlackBerry smartphone
  • KB14320 How to maximize space and power battery life on the BlackBerry smartphone
  • KB14213 Call logs, SMS text and email messages are deleted from the BlackBerry smartphone

  Finally, it is always important to correctly close applications when you are finished with them. Using the back or on the red button won't do that - those leave the app to decide what to do... and some let themselves memory-resident, consumes resources on your BB, slowing down the overall performance. On the contrary, to close an application, tap on and select 'Close' or 'Quit'... which force the application to be closed, freeing resources for your new use it consumed. Some applications will always be running (in general - BBMessenger, browser, homescreen, phone and Messages)... but, you should always close them properly - especially the browser... If we leave on a web page, it will not consume only additional resources, but the power of the battery as well.

  In addition, each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy. Some have taken to do this on a regular basis as a preventive measure... some as often as once a day. Others got the app QuickPull to automate a simulated Batt Pull.

  Best!

  Good luck!

• ESXi 4.1 - Question about the memory usage

  Hi all

  I am currently in the process of migrating from ESX 3.5 and ESXi 4.1.0 everything by making the upgrade of my equipment (3 x HP DL380 G7, 24GO RAM, CPU Intel X 5660 2 each).

  The boxes are installed with ESXi 4.1.0 Build 384481 and hpq - esxi4.1uX - bundle-1. 0a, hardware monitoring is done using HP SIM (V6, Windows).

  What bothers me, however, is that the VSphere Client (4.1.0 Build 345043) reports steadlily increases the memory usage in the Summary tab. The increase varies according to the system, ranging from 98MB in 1848 MB in the last 3 days, continues to grow.

  During this time the performance tab reports consumed memory exceeds granted memory.

  Everyone saw this behavior, too? Is this normal or am I facing a memory leak here?

  Thanks in advance.

  Kind regards

  SilentGuy

  good no worries. Here's the jsutification who might come to our rescue.

  the reason to ask to the image is to understand tips on different time and or prabably model.

  officers of 3rd party as HP may be one of the reasons for these behaviours and this pumps memory when they perceive newspapers. I think it's side normal use would normally not go beyong 2000 MB for an esxi normal opertaing without no VM

  I suggest you to watch more than two days and see if it grows even more...

  hope this helps

• Too high on linux VM memory usage

  We have a linux virtual machine that uses so the amount of memory.  It helps to be on a physical server with only a gig of memory, now it's on a virtual machine with 1.5 GB of memory and it is often the sending of alerts that the memory usage is of the order of 90 to 98%.  Maybe something was wrong when we converted to a physical process to a virtual machine?  It runs only Apache 2.0 so I don't think I need to increase the memory.  Everything that I can check, or perhaps something that should be done after the conversion of a physical to virtual machine?

  • Make sure you have installed and after installation script executed vmtools

  • know what process consumes all this memory, you can get this data by using the ps command
    PS - eo mmtp, rss, vsize, args pcpu | Sort - k 1-r

  ---

  MCSA + S, VCP 3, 4 VCP, vExpert

  http://wirtualizacja.WordPress.com

• ESXi 4 memory usage

  We lack an ESXi 4 server with 6 virtual machines - each with about 2 GB of memory. We have 6 GB of memory on the server. Everything worked very well, and I added an another vm with 2 GB of memory. It shows that 5362 MB of memory is in use, but all the vm have slowed and the Task Manager display memory is attached. Is this normal behavior for this to affect all the vm? It seems that the host has still nearly 800 MB free memory.

  Thank you

  Scott

  It is 'Normal' when you have affected too much RAM to this degree...

  1. you let memory on the host computer to run/use ESXi (1-2 GB one).

  2 no more memory allocated to the execution of that virtual machine is that you actually have in the host. You have 12 GB allocated before you added the 7th VM, bringing up to 14 GB. More than two times the physical RAM in the host.

  I'm running inside my ESXi 4 server with 16 GB of RAM. I got 9 VM (allocated) RAM total adds up to 14.5 GB. Memory usage is about 10 GB. I could run another couple of VM (safely), depends on the amount of RAM is allocated to each until I meet questions. You must watch your Resource Allocation settings. If you have reserved memory on a virtual machine, which off memory in the pool can be given to other virtual machines...

  You have a few options to fix this...

  1. turn power off all the virtual computer that you don't need to run.

  2 remove the memory reservations on the virtual machine

  3. reduce the amount of RAM to the virtual machine, so the amount you are trying to use is closer to what the actual capacity is.

  4 increase the physical RAM inside the host.

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• Monitoring the memory usage on iOS using the Stats class

  I was check memory usage on an application I'm developing for iOS using Stats class https://github.com/mrdoob/Hi-ReS-Stats ( http://help.adobe.com/en_US/as3/mobile/WS4bebcd66a74275c3-315cd077124319488fd-7fff.html#WS 948100b6829bd5a61637f0a412623fd0543-8000).

  I added the class Stats to my project and redeployed and, Ouch, reported in Stats memory usage ramp upward (quite slowly) even when there is nothing going on in the application (just displaying a loaded bitmap).

  To try to find the question, I created a project with a test class that extends Sprite with just this single call in the constructor: -.

  addChild (New Stats());

  I have deployed to the device to check that he didn't swallow all of memory.

  But I was surprised to observe the use of the memory to crawl upward and upward (to 5) before kicking in some garbage and takes memory down. I left it running and then he slipped once again more than 7.5 this time before being deported back down to just below 3.

  So 2 questions that I would be grateful any feedback/comments/thoughts on related: -.

  1 is this normal (i.e. memory creeping up when there is nothing else than to the Stats in the project)?

  2 - What is the best way to monitor the memory usage in an application? Good enough stats - is Stats itself causing the memory usage?

  All the best guys!

  See also thread (http://forums.adobe.com/message/4280020#4280020)

  My conclusions are:-

  -If you run an application and let idle, use memory slips gradually upward (probably in memory is used to perform the Calc/refresh the display, etc.)

  -Periodic garbage collection occurs and memory is brought back down

  -This cycle could be more than 5 min.

  Work with your real application and memory will increase and be published much more quickly/regularly.

  -It's probably worth making an initial check running on your desktop computer to smooth out all the initial problems

• RoboHelp 7 - grip - increase memory

  I use RH7 project HTML, Windows XP (SP2), logon as ADMINISTRATOR
  
  Sometimes, I try to open a document and HR crashes. When I look at the processes of the system the CPU is at 100% and the memory usage increases slowly. In my view, that the page is an imported HTML file. I also had the same result by selecting all (ctrl-a) made an edit page.

  Thx for help on this. The files are on a closed network and can't get off of this network.

  The problem that is apparently split columns in a table. The table has 100 rows and 10 columns, and a bunch of merged cells. Don't know how to recreate from scratch. If it's a bug can be subject of debate. Given that the application crashes, I would say it is. The files display well in a browser and Dreamweaver (a product of Adobe).

• Memory usage of Firefox flies away and crashes despite Reset etc.

  I use Windows Vista and recently, after he tried to update Java and Adobe plugins for Firefox browser last shot every time I use Firefox any open what really but especially if a video is open the memory usage keeps climbing and does not stop. Firefox crashes almost everytime. I tried the Reset, I tried to turn off and so on several plugins and others, and nothing has changed, but that the memory usage can climb higher and avoid crashing anymore. The fundamental problem of the memory usage crazy not stopped nor slowed down.

  It starts at an average use 200 k to 300 k, which was normal, except if he had run for hours or playback of videos for hours could go up to 800 k. For now, thirty minute walk with no video and four tabs is 1 300, 000 k. I don't know what does. I'll try to uninstall adobe and then use an earlier version but I have done so many things at this point, I'm curious to know who else has this problem. I have not tested the safemode, but despite everything I need a lot of these add-ons to what I use my browser for. I do not understand why the use of memory keeps climbing even when I do nothing. I run a system scan for virus etc, nothing. I know that I have an older video, its pilots updated card and I tried to turn on the option acceleration on and out also. Why Firefox would continue eating memory?

  The crash of the reports I receive look like this:
  BP-7cf4e751-66dB-49fc-8a05-083132130814
  BP-b680d967-eee5-44a7-a5e0-c1f422130814
  BP-5b457653-8B58-4ee0-80cc-32fe82130814
  BP-304b8b40-d4e5-4F36-AF10-de58e2130814

  Thanks to anyone who can help!

  Three of the four crash reports indicate a correlation with the Ghostery extension. The precise cause seems to be indeterminate. Can you make an exception for the video sites and see that allows, or try turning it off for 24 hours?

• Extremely high after upgrade to Firefox 12 memory usage

  After I've upgraded to Firefox 12, I started frequently affected by hot air balloon Firefox memory usage extremely high (2-3 GB after a few minutes of navigation) light. Sometimes it will fall back down to a more reasonable level (a few hundreds of MB), sometimes it crashes (probably trying to garbage collect everything), and sometimes it crashes. Usually the thread crash cannot be determined, but when it's possible, it's in the garbage collection code ( https://crash-stats.mozilla.com/repor.../list?signature=js%3A%3Agc%3A%3AMarkChildren%28JSTracer * %2 js C + % 3A % 3Atypes % 3A % 3ATypeObject * 29% ).

  I managed to capture a subject: report memory when Firefox had about 1.5 GB and have attached an image.

  A couple of things I've tried. I have a lot of tabs open (although don't load it the tabs until the selected option is enabled), so I copied my profile, all kept my extensions enabled, but all my tabs closed. I then left an open page http://news.google.com/ and it worked very well for several days, while my original profile goes down several times a day.

  I also tried to disable most of my extensions, leaving the following extensions that I refuse to sail without:

  Adblock more
  BetterPrivacy
  NoScript
  PasswordMaker
  Views
  Priv3

  However, the problem still happens in this case.

  Don't know if this helps or not. I'm looking forward to trying Firefox 13 when it comes out.

  Never knew what was causing the problem, but have disappeared since the upgrade to Firefox 13, accidents and memory pathological use.

• Firefox uses a huge amount of memory on my computer. I continue to receive alerts from high memory usage. Can I do to solve this problem?

  Firefox uses a huge amount of memory on my computer. I continue to receive alerts from high memory usage. Can I do to solve this problem?

  300-400 MB is not huge.

  How much RAM do you have?
  
  How AVG reports that Firefox uses?

• withdraw the authorization allowing you to monitor the memory usage

  I now often have either force quit, restart and started having panic 'of the core"since I agree allow Firefox CPU usage monitor. I'm still on OS X 10.6.8 on my Mac. I got no problem with anything since installing this OS X.

  However, from time to time with the latest Firefox 7.0.1 installation I think the program or my computer 'blocks' and seems unresponsive. I left active Firefox and resident on my computer last night and once again, everything will be inadmissible. I opened the monitor activity and noticed that Firefox was consuming 283 MB of real memory (now 298,6 MB) and I have this one open another tab for the Seattle Times. I withdraw my permission to allow Firefox to watch my memory usage and need to know how to delete the cookie or what ever that governs)

  Go to Firefox > Preferences > advanced > general tab and uncheck the box "send performance data" more information here.