Network scanning multi-page Officejet Pro 8500 a w/o ADF (Vista and HP Print software)

Without using the ADF on the 8500 has, can I scan multiple pages in a PDF file if the scans are done from the PC? How?

My version of Vista is 6.0.6002 Service Pack 2 Build 6002.

My HP Officejet Pro 8500 has e-all-in-one printer - A910a is the standard model, for example, the premium product of mid-range. It is connected by LAN cable. It scans, prints and can provide the status of ink level.

The 8500 is connected via the network, and on a Vista PC, I use a desktop icon to launch "HP Officejet Pro 8500 A910.exe". The new software is very different from the [Photosmart c6150 dead] [uninstalled] old HP Solution Center, and I looked in the new textbooks at least briefly, so I hope someone can same thing me some time with a basic question/issues scan. My research forum has failed, but if someone has a link to a relevant thread, that would be appreciated.

Without using the ADF on the 8500 has, can I scan multiple pages in a PDF file if the scans are done from the PC? How?

I also tried scanning browser based and there is a drop down for sweeping on both sides, but the drop down menu is not activated and cannot be used.

I only went through the configuration of the network folder, which may be necessary to get the ability I want. On this subject, I wonder if I set up a folder for all users, or just for my login.

Thanks for any help!

Success?

Well, I created a folder network and was then able to scan to a PDF file of several page without using the ADF (ADF) documents.  To do this, (1) install the software provided with the Officeject Pro 8500 has, (2) the installation program a network folderand (3) run the scan of the touch screen located on the Officejet Pro 8500 has.

(1) install the software supplied on CD (or probably downloaded from somewhere near here). You may be able to work with only the web browser interface, but I wasn't before install the software provided on the CD, and I suspect that some software is required on the PC.

Install the downloaded software or the software provided on the CD-ROM titled

HP OFFICEJET PRO 8500

A910

(2) Setup a network folder. The installation of the software created a few new icons on my Vista PC.  Double-click the icon of the desktop titled "HP Officejet Pro 8500 A910". On my Vista PC, it runs,

"C:\Program HP HP Officejet Pro 8500 Officejet Pro 8500 A910.exe A910\Bin\HP"

An application window should appear. Mine has a title, "HP Officejet Pro 8500 A910 (network).

The application window has a section of Scanner Applications on the left. From there, the scanner to the network folder Wizard. Which can be done by double clicking on the 'scan to network folder Wizard"or by the first double clicking on"Scanner Actions"and on the screen that appears, click on"Scan to network folder Wizard.  Otherwise, you can get this done through the web browser, if you know the URL for your device's built-in web server. Because I use my DHCP router (to allocate IP addresses in my local network), I currently access the 8500 a of http://192.168.1.19/. From there on, I can access the Scan tab, and I can access the ability to "Setting up the network folder" on the left.

Using the scan to network folder Wizard, I clicked on New and used the Browse button to select "C:\Users\Gordon\Documents\My Scans" to set up a folder named "Gandalf Gordon". The next page of the wizard, it will take your network password (or local password if he is counting on the local PC) required to access the PC where the path "C:\". "sailed above is located. When I clicked on finish, the wizard opens a web browser which indicated a certificate error. I chose to continue to the site, which turns out to be the web server integrated in the 8500 has. So now you know a URL where your built-in web server on your network if you were already uncertain. If you do this URL a favorite browser, the favorite should work even if the IP address of the 8500 a is changed in the future.

Display (3) initiated a sweep of the touchscreen located on the Officejet Pro 8500 a. tap the icon "Scan." Tap the 'network '. Select the network folder. Place a page to scan on the glass of the scanner without using the automatic document feeder. Press 'Start Scan '. When the touch screen prompts, "Page another Scan", select 'Yes', place another page on the scanner glass and click, 'Start scan '. When the last page is analyzed, answer 'No' to the prompt "scan another Page.

Note: When loading pages additional manually, you have to work a little faster or unit will then expire and close the file with as many pages that you managed to scan. I did three pages as a test.

If there's a better solution out there, please share!

Tags: HP Printers

Similar Questions

  • HP Officejet Pro 8500 jams every time I send something to print.

    My HP Officejet Pro 8500 jams every time I send something to print.  Troubleshooting does not detect it.

    Contact HP for assistance they can offer to check the paper path or solve the problem.  It is not a Windows problem and there is not much we can do to help with this kind of problem.

  • HP officejet pro 8500 a910 does give me the option of printing in black and white

    Hello

    My hp officejet pro 8500 a910 does give me the option of printing in black and white. How choose to print in B & W when the option does not appear under properties?

    Thank you.

    Hello

    Used to print application, click file > print

    Click Properties or preferences to access the Printing Preferences dialog box.

    Click the Advanced Options button at the bottom of the window.

    According to the characteristics of the printer, click on the area of selection of printing in grayscale and as high-quality grayscale or black ink only.

  • I receive the error "an error occurred during the scan" on HP Officejet Pro 8500 a

    When I try to scan a document, I get error "an error has occurred during the analysis".  It will occur at each attempt of third analysis or during the use of the document then automatic flow.  I have a HP Officejet Pro 8500 a on a Windows 7 64-bit operating system.

    Hi mdewitt,

    I appoligize we do not have a program scrub for this software package. I would like that restart you the equipment in the following order. Turn off the router, printer & computer and reboot the router. Once the router is completely reloaded start the printer and the computer. Let me know if you can scan using the HP software. If you are unable to scan using the HP software open paint and try scanning from Microsoft Paint.

  • Duplex scanning possible HP Officejet Pro 8500 A909a Series?

    There are some online reports that the HP Officejet Pro 8500 (withount wlan functionality) supports the duplex scanning. However, I can't understand how this. Does anyone know if duplex analysis is supported for my HP Officejet Pro 8500 A909a?

    See you soon

    Karsten

    Sorry, the 8500 a909a DOES NOT print DUPLEX. MORE than 8600 and the PREMIUM 8600 don't.

  • Can't scan on HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar?

    How scan you on an HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar? Whenever I try, I get the following message:

    Error message: Scanner reported an error - unable to open a session on the device.

    Hi Irossga,

    This document explains how to use the built-in features to your operating system to scan photos and documents.

     

  • Scanning from feeder OfficeJet Pro 8500 has

    I tried to search several times but I can't seem to find anything that addresses this specifically.

    I'm trying to scan multiple pages on my OfficeJet 8500 a on a machine running XP.  I deally I would that they in a single file, but if not possible I can deal with that later.

    However, unlike other scanners XP, I used, there no option to select the tray as the source.  This doesn't seem to work when you try to scan directly from the printer.  Instead, I get a blank image scanned from the glass, and no paper is fed.  Documents (a stack of 9 or more) * are * inserted in the charger as they should be, as much as they are when I copy successfully all the time.

    Please tell me it is possible to do - it seems like a no-brainer.  What I am doing wrong?

    Well, it works now.  Don't know what I did differently, but there you go.

  • OfficeJet Pro 8500 has just put in place and feel is biased

    I just bought and put in place the 8500, everything seems fine, except that when I print from the computer I only get half of the page and it is all asymmetrical on paper. I tried the copy function, I got the full page, but he was also seriously twisted.

    I've lined up the printheads twice for nothing doesn't.

    Usually tilt occurs when the paper guides into the support in the status bar are not tightly against the paper.  This allows the paper is introduced at different pressures along the edge and it gets introduced into the printer at an angle.

    You can also take the paper from the printer, turn 180 degrees (so that the front edge is now the back edge) and put it back in the printer.  If you print again and the skew going the other way, that the paper is not cut right.

    You should also check that there is nothing in the drain plug rear tray and the tray or the duplexer is completely down.

    As soon as we have the issue fixed tilt, we can see if we still have a problem with the 1/2 page print.

  • HP officejet pro 8500 a910 does give me the option of printing in black and white on a mac.

    I would like to create a new preset using black and white or grayscale for an a910 8500 but it doesn't seem to be a way to specify black and white or grayscale in the dialog box print when printing from an application. Also, when I go to the presets dialog show I can't change all the settings for a custom preset.

    very confusing dialog boxes. It doesn't seem to be a way to access the dialog box presets without being in a print in an application dialog box.

    I'm running OS X 10.7.3

    Argh!

    Hello

    Follow the steps below to print using black ink only:

    1. from the application used to print, click the file menu and select print. The print window is displayed.
    NOTE: The print window might be minimized: click Show details to display all available parameters.

    2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
    Will appear as Copies & Pages within Microsoft Office applications.

    3. Select Paper Type/quality in the menu dropdown.

    4. click on the triangle next to color Options to the settings.

    5. set the color to Grayscalefield.

    6. adjust the Grayscale in Black cartridge only.

    You can save the settings for later use by clicking preset > save current settings as preset.

    Kind regards

    Shlomi

  • Touchscreen Officejet Pro 8500 A910g a will not answer and the test page does not print during installation

    During the setupl touch screen lights up with the screen language and network led on.  Test page does not print.  Touch screen will not respond.  Printer purchased on 20 Oct.

    Hi paulw17291,

    Power remove power at the back of the printer cable. Wait about 1-2 minutes before plugging it back in. Let me know if that solves the problem you are experiencing.

  • OfficeJet Pro 8500 a-green power supply light on-Quit printing using as a copier

    I was using the printer as a copier, placing documents on the glass and close the cover.   About 8 different documents, then the printer just quit so that, in the middle of printing a page printed.   Green power light is on, but when I push it, it is not off. Touch control panel does not respond.  Nothing seems to function.   Tried to unplug the power cord at the back, unplug the unit from the wall and disconnect the power supply cord.  Plugged everything back in after about 10 minutes to be disconnected and no help.  Green power light turns on but no function doesn't seem to work.  Have windows 7, 64 bit HP computer, but the copier function should work even if not connected to the computer.

    Appreciate any help.   Thank you

    Carl

    It seems that the firmware may have had a fatal error occurs. I'm afraid there is little you can do to solve the problem. Try the procedure described in the document below. If this does not work, you will need to replace the printer.

    http://goo.GL/aNuHW

  • HP officejet pro 8500 has 910 with windows vista to abnormal termination that don't resolve

    My printer was given to me and will loop continuously: it starts and displays the progress bar, operates the head printer port.

    poster 'abnormal termination' and stops and resumes the same loop again and again. I tried both the soft reset and hard reset with no results or editing, he keeps just loop. I checked for paper jams, removed covers and clean the printer replaced the cartridges of ink and cleaned printer heads, made a complete Visual inspection, nothing helps. (I'm a computer technician).

    I am at a loss here and any help would be greatly appreciated!

    Thank you!

    Well, I received my new adapter (the correct one) and it solved the problem! Only now I have a jam to carriage of mystery that I will work on next.

    I'm going to mark it as RESOLVED, because it fixed the issue I was addressing. Yep! Make sure you have the right adapter.

  • My officejet pro 8500 a replacement is not recognizing my original printer ink cartridges

    I installed my original printer cartridges in the replacement printer, but when I try to complete the entire upward I can't past the point where it tells me to install the ink cartridges.  There is much ink in the cartridges as I had the original printer for a very short time, any ideas?

    Hi casio,.

    You must use configuration cartridges must have provided with the replacement printer for. If you do not have the cartridges of configuration you will need to call our technical support at the 800-474-6836 and explain that the replacement printer came with cartridges installation. If you do not live in the United States / Canada region please click the link below to get help from your region number.

    http://www.HP.com/cgi-bin/hpsupport/index.pl

  • OfficeJet Pro 8500 has Premium - setting the default value of print quality?

    How do I put permanently by default of this printer, ink more fast and the lowest use draft printing black & white? I continue to put when it prints and it goes right back to the way it was before. I do not see a menu to turn on the printer screen or a way to make the new default value when I change it in the configuration of the printer on my PC.

    In the printer preferences, advanced...

  • HP Officejet Pro 8500 has more: I need help to setup windows fax and scan on a network wireless home

    I'm stuck in the box of / address of the fax server in the Windows Fax and scanning configuration wizard. Where can I get this information? I think I can finish with this info.

    Hello

    Windows Fax and Scan allow scanning from Windows, fax of the printer can be done by the HP Officejet Pro 8500 A910 software or Print Fax - printer HP Officejet Pro 8500 A910.

    Windows Fax and Scan to allow fax when your PC is equipped with a fax modem that you can find below:

    http://Windows.Microsoft.com/en-us/Windows/set-computer-send-receive-faxes#1TC=Windows-7

    Follow page 58 of the user guide below to send a fax from your computer using the HP device all in one:

    http://h10032.www1.HP.com/CTG/manual/c02668142

    To receive faxes on your PC follow the section "to set up fax to PC (Windows)" on page 69 of the instructions.

    Kind regards

    Shlomi

Maybe you are looking for

  • I can't change my apple ID

    I changed my Apple ID and choose a new password. However, neither my iPad, nor my iPhone offers my new id to sign in, they offer my old one that no longer works. I can't figure out how to get my new id on my devices. Help!

  • HHR broken hinge

    Hello I see that it is a recurring problem among users of HP Envy, but I also need fixing. My computer is no longer under warranty (since July) and for a month (August), the hinge has been steadily worsens everytime I open, close the laptop (it's eve

  • Does someone make a contactless tachometer?

    Hello, I'm doing a balancing system that will use a tachometer and an accelerometer to determine how much weight to add to a rotor and whether to add it to or to balance.  Has anyone done a contactless device that allows to determine RPM?

  • Cannot remove RealPlayer!

    I have problems with RealPlayer. I installed it a couple of years, when I decided to unstall I went through all the steps. The message said it was uninstalled, but it stll introduce yourself when I do to the top of the program area. What is going on?

  • I'm a gamer. I use xp service Pack2 with windows 7 in order to run an older application without interruption to windows 7?

    Adviser advised compatibility xp SP2 download