IncrediMail 2 displays ERR failed connection

Similar Questions

• recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

  recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

  Hi mikedav,

  Thank you for using the Microsoft Windows Vista Forums.

  Method 1:

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If you are not able to connect to the internet after you install the update, you need to optimize Internet explorer by following the instructions below.

  Method 1:

  Follow the instructions in the link below which will help you solve the problem.

  Tips for solving problems with Internet Explorer

  http://windowshelp.Microsoft.com/Windows/en-us/help/8038f9ac-9bf9-4809-8d75-fc42818d8af71033.mspx

  Method 2:

  Follow the instructions in the link below to optimize Internet Explorer.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Satellite A500 - display driver failed

  Hello

  Recently, my three year old Toshiba A500 (0400E PSAM3A) has started to display the message "Display Driver failed" and the screen became all BEHLULI and weird. I'm sure it's the graphics card, open the computer self and he cleaned it with an air compressor that makes it better for one day, but then he returned to normal. I also formatted which did not help.

  I just want a second opinion as to whether it IS in fact the graphics card (not drivers), and if replacement of the graphics card would be a possibility? I had a quick glance when I was cleaning up the outside, and the map is not soldered to the motherboard.

  Any advice would be great,
  Thanks in advance!

  Did you notice this problem when you start Notepad in safe mode too?
  Have you also tried to reinstall the recovery image and test the feature with the factory settings? Is - this result is the same?

  General replacement of the GPU is not supported, and because of the design of specific laptops (cooling system) GPU shouldn't be improved.
  Replacement? Can you do this alone eventually?

• my Macbook just stop to connect to one of my yahoo email (failed connection) accounts can I connect on all my other devices

  my Macbook just stop to connect to one of my yahoo email (failed connection) accounts can I connect on all my other devices

  Delete and re add the password for that account or delete and re add this email account.

• Test the connection to the database failed: connection to the server could not

  I have one of my servers HPOV NNMi 9.23 restarted this morning and NNMi is loading is no longer.  I see the following errors in the newspapers said:

  /var/opt/OV/log/NNM/public/nmsdbmgr.log

  06/04/2015-09:28:05 connection to the database test failed: connection to the server could not: connection refused
  The server running on host "127.0.0.1" and accept
  TCP/IP connections on port 5432?

  /var/opt/OV/log/NNM/public/postgres.log

  2015-04-06 09:25:55.312 EDT: 8580:0LOG: could not translate the hostname "localhost", "5432" service at the address: name or service not known not

  2015-04-06 09:25:55.312 EDT: 8580:0WARNING: could not create listen to "localhost".

  2015-04-06 09:25:55.312 EDT: 8580:0FATAL: could not create TCP/IP sockets

  I have checked/etc/hosts and found the following entry:

  #; Local
  #;
  127.0.0.1 localhost

  The command line, I can ping localhost without problem.  Not sure why NNMi begins not at this point.

  Turns out be the permissions on the file/etc/hosts.

• failed connection

  failed connection

  Hello

  You are running Microsoft Security Essentials?
  What operating system? Prior security software? No matter what security software installed again?

  A possible reason for this problem is that you have installed entirely or partially on the PC security software conflict.

  You may need to use a cleaning tool to remove your prior security software:
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91

  If this fails to solve the problem, open an email support incident:
   
  To open an email support incident, start here:
  https://support.microsoftsecurityessentials.com/

  I would like to know if this helps

  Elvis

• "When I tried to sign on the computer, I get the following message: the user profile service service failed connection, failed to load the user profile.

  "Whenever I tried to sign up with my password to connect, do the following: the user profile service service failed connection, failed to load the user profile" when I click OK, it disconnects... Help, please

  Go to Safe Mode and do a system restore. See the link below:

  The user profile Service has not logon. User profile cannot be loaded
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/the-user-profile-service-failed-the-logon-user/995955f8-d9d4-4148-840D-c896c3be78b8

  Follow the links on the post.

• TAC +: TCP/IP open to 10.20.17.2/49 failed - connection has expired; remote host does not

  GANYMEDE + configured on the router and the router is in ACS.  I can ping from the ACS, but the router cannot establish a connection to authenticate users.

  AAA server Ganymede group + hq_acs-1

  Server 10.20.17.2

  Ganymede IP source-interface GigabitEthernet0/0

  !

  AAA authentication login default group Ganymede + local

  AAA authorization config-commands

  AAA authorization exec default group Ganymede + local

  AAA authorization commands by default group Ganymede + local 10

  AAA authorization commands 15 default group Ganymede + local

  nested AAA accounting

  AAA accounting newinfo periodic update 60

  AAA accounting auth-proxy default start-stop Ganymede group.

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  AAA accounting network default start-stop Ganymede group.

  Default connection accounting AAA power Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  AAA accounting resource by default start-stop Ganymede group.

  BigTree_3945 #sh ip int br

  Interface IP-Address OK? Method State Protocol

  GigabitEthernet0/0 10.4.3.1 YES NVRAM low low

  GigabitEthernet0/1 10.12.10.26 YES NVRAM up up

  Serial0/2/0 unassigned YES NVRAM low low

  Serial0/2/0.602 10.12.15.10 YES NVRAM low low

  11:08:13.673 Apr 13: MORE: Queuing AAA request authentication 79 for the treatment

  11:08:13.673 Apr 13: MORE: treatment demand beginning 79 authentication id

  11:08:13.675 Apr 13: MORE: authentication start package created for 79 (cisscdb)

  11:08:13.675 Apr 13: MORE: using the 10.20.17.2 Server

  11:08:13.675 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: started 5 sec timeout

  11:08:18.676 Apr 13: HIGHER (0000004F) / 0/NB_WAIT/1BDD9C34: expired

  11:08:18.676 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: expired, cleaning

  11:08:18.676 Apr 13: HIGHER (0000004F) / 0/1BDD9C34: the package of treatment response

  11:08:25.834 Apr 13: MORE: Queuing AAA request authentication 79 for the treatment

  11:08:25.834 Apr 13: MORE: treatment demand beginning 79 authentication id

  11:08:25.834 Apr 13: MORE: authentication start package created for 79 (cisscdb)

  11:08:25.834 Apr 13: MORE: using the 10.20.17.2 Server

  11:08:25.834 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: started 5 sec timeout

  11:08:30.836 Apr 13: HIGHER (0000004F) / 0/NB_WAIT/1BDD9C34: expired

  11:08:30.836 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: expired, cleaning

  11:08:30.836 Apr 13: HIGHER (0000004F) / 0/1BDD9C34: the package of treatment response

  11:08:43.689 Apr 13: TAC: using default Ganymede groups ' Ganymede"list."

  11:08:43.689 Apr 13: TAC +: opening TCP/IP 10.20.17.2/49 Timeout = 5

  11:08:51.057 Apr 13: MORE: Queuing AAA request authentication 79 for the treatment

  11:08:51.057 Apr 13: MORE: treatment demand beginning 79 authentication id

  11:08:51.057 Apr 13: MORE: authentication start package created for 79 (cisscdb)

  11:08:51.057 Apr 13: MORE: using the 10.20.17.2 Server

  11:08:51.057 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: started 5 sec timeout

  11:08:54.692 Apr 13: TAC +: TCP/IP open to 10.20.17.2/49 failed - connection has expired; remote host does not

  11:08:54.692 Apr 13: MORE: Queuing AAA accounting request treatment 76

  11:08:54.692 Apr 13: MORE: treatment of the accounting application id 76

  11:08:54.692 Apr 13: MORE: sending AV task_id = 332

  11:08:54.692 Apr 13: MORE: sending AV timezone = EDT

  11:08:54.692 Apr 13: MORE: AV = shell shipping service

  11:08:54.692 Apr 13: MORE: sending AV start_time = 1334329734

  11:08:54.692 Apr 13: MORE: sending AV priv-lvl = 15

  11:08:54.692 Apr 13: MORE: sending AV cmd = show logging

  11:08:54.692 Apr 13: MORE: request for accounts created for 76 (n20j03t)

  11:08:54.692 Apr 13: MORE: using the 10.20.17.2 Server

  11:08:54.692 Apr 13: HIGHER (0000004C) / NB_WAIT/1/20FD90EC: started 5 sec timeout

  11:08:56.058 Apr 13: HIGHER (0000004F) / 0/NB_WAIT/1BDD9C34: expired

  11:08:56.058 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: expired, cleaning

  11:08:56.058 Apr 13: HIGHER (0000004F) / 0/1BDD9C34: the package of treatment response

  11:08:59.693 Apr 13: HIGHER (0000004C) / NB_WAIT/1/20FD90EC: expired

  11:08:59.693 Apr 13: HIGHER (0000004C) / NB_WAIT/1/20FD90EC: expired, cleaning

  11:08:59.693 Apr 13: 1/HIGHER (0000004C) / 20FD90EC: the package of treatment response

  BigTree_3945 #.

  The AAA Client IP address	10.4.3. * 10.12.15.10
  Key
  Group of network devices	Test NJT AccessLink (Not assigned)
  Authenticate using	GANYMEDE + (Cisco IOS) RADIUS (Cisco Aironet) RADIUS (Cisco BBSM) RADIUS (Cisco IOS/PIX) RADIUS (Cisco VPN 3000) RADIUS (Cisco VPN 5000) RADIUS (IETF) RADIUS (Mount) RADIUS (Juniper) RADIUS (Nortel) RADIUS (Sepi)
  Connect GANYMEDE + single AAA Client (stop recording in accounting in case of failure).

  The 10.12.10. range * is listed under the HQ site.

  Your help is greatly appreciated.

  You said that you can ping the router ACS, have you tried the GigabitEthernet 0/0 interface packages (that is those THAT GANYMEDE + will attempt to use, given the configuration you have posted) supply?

  What is the network path between the router and look like ACS (IE, a firewall, NAT, etc.)?

  Can you connect to port 49 to the IP address of the router GBA, GigabitEthernet 0/0 of supply packages?

  Using VRF?

  Which version of IOS?

• External module CEAP CINEWARE SceneLayer: CINERENDER - failed connection (5027 & 12)

  Hello

  I have this error when I want to create a Maxon Cinema 4 D file.

  External module CEAP CINEWARE SceneLayer: CINERENDER - failed connection (5027 & 12)

  That do I do? Thank you

  Hello

  I had this error in after effects CC, as a result of an update.

  Site of I found a solution on the: CreativeCOW

  "Go in the effect controls panel and click Cineware Options

  Under the TCP CINEWARE PORT mine has been set at 5030 and I changed it to 5027, and now I see my CD4 layer in AE"

  It works!

• Get the "failed connection: incompatibility of username/password when you use IE accessing the page of Configurator vco.

  When configuring a device to vCO 5.5.2 I can't login the configuration page https://:8283/ using IE as your browser. I constantly get the message: ' failed connection: incompatibility of the username/password or account temporarily blocked after too many failed attempts. But not changed the error even after that I changed the password. Suresh -

  Use a different browser (Firefox or Chrome) and it will work ;-)

  Kind regards

  Marc

• javax.xml.soap.SOAPException: Message send failed: connection reset

  Hello gurus,
  
  I try to install IAM on a cluster deployment. I have a physical as a front-end load balancer, which ensures the load to alternately between the two servers where IOM managed servers are deployed.
  When I try to start an approval process, SOA server seems to not be able to connect to the servers of the IOM, which gives the following error:
  
  < 23 April 2012 12:01:11 CEST > < error > < oracle.integration.platform.blocks.soap > < BEA-000000 > < could not send request to http://identitymanagement.mydomain:14000/workflowservice/CallbackService because of the exception
  javax.xml.ws.WebServiceException: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: connection reset
  at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:851)
  
  where < identitymanagement.mydomain > is the host name of the cluster. Maybe SOA calls are directed in the timeout while trying to connect to the IOM (cluster balancing algorithm times), so, considering that Web services take time to answer (say 10 min), I want to know if there is such a setting on SOA to configure so that it never go into the time-out in the meantime that web services to answer.
  
  Thank you
  Carole

  Ejani,

  If you want to confugure time-out, see as follows:
  Re: Asynchronous BPEL 2.0 problem - Transaction rolled back to

  But I'm not sure that it is on the side of the soa. Try to increase the parameters of time-out on the (Bounce the server SOA) load balancing

  Arik

• Check if the value of the DISPLAY variable - failed

  Hi friends,
  
  When installing oracle * 11 g R2 in Linux (Red Hat) 5 * I am facing some problems related to the DISPLAY affecting some Java attack on exception during launch 'runInstaller '. Please check below.
  I did face related questions before as well, but after setting the DISPLAY variable before start of installation (YES) always to avoid these problems, tried the same steps this time as well, but "no chance."
  
  
  =============================================================================================
  [data oracle@localhost] $. / runInstaller
  From Oracle Universal Installer...
  
  Check the Temp space: must be greater than 80 MB. Real 7440 MB passed
  Check the swap space: must be greater than 150 MB. Real 2527 MB passed
  Monitor: must be configured to display at least 256 colors
  > > > Could not execute auto check for display colors using command/usr/bin/xdpyinfo(1). Check if the DISPLAY variable is set. Failure of < < < <
  
  Audits of the requirement has failed. You must meet these conditions before
  
  continue with the installation,
  
  Continue? (y/n) [n] n
  
  

  Prerequisite required Ignoring failures. Persistence of...

  Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2012-05-12_01-26-43 PM. Please wait... [data oracle@localhost] $ Exception in thread "main" java.lang.NoClassDefFoundError
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:164)
  in java.awt.Toolkit$ 2.run(Toolkit.java:821)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:804)
  at com.jgoodies.looks.LookUtils.isLowResolution (unknown Source)
  to com.jgoodies.looks.LookUtils. < clinit >(Unknown Source)
  to com.jgoodies.looks.plastic.PlasticLookAndFeel. < clinit > (PlasticLookAndFeel.java:122)
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:242)
  at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783)
  at javax.swing.UIManager.setLookAndFeel(UIManager.java:480)
  at oracle.install.commons.util.Application.startup(Application.java:758)
  at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
  at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
  at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
  at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
  at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)
  =================================================================================================
  
  
  Current setting (values):
  [data oracle@localhost] $ echo $DISPLAY
  localhost.localdomain:0.0
  
  
  
  [root@localhost database] # echo $DISPLAY
  : 0.0
  [root@localhost database] # xhost + localhost.localdomain
  localhost.localdomain being added to access control list
  [data oracle@localhost] $ export DISPLAY
  [data oracle@localhost] $ echo $DISPLAY
  : 0.0
  
  Then follows the error message on the display settings and a trail of Exceptions Java (provided above)
  
  
  Help, please.
  
  
  Thank you
  Prashant Dixit

  Prashant_Dixit wrote:
  Hello

  Thanks for the reply - I received a system clock analog once I've run 'xclock' command as long as user root, but received an error message when even tried with the "oracle" user

  What EXACTLY do you (differently?) between the time where you succeed as a 'root' & fail as 'oracle '?

  I can assure you that xclock will fail if you use "su" as below

  Su - oracle

  You need TO connect DB Server system DIRECTLY as user 'oracle' with X 11 active transfer OS

• Hi my iphone 4S is the display iphone disabled connect to itunes what do I do

  Hello

  My iPhone 4S displays the message iPhone disabled connect to iTunes I have connected to iTunes, but do not know what to then someone can advise please.

  Hello

  Follow the instructions in this article to support > If you forgot the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• Connection of Mac mini at an Apple display with ADC connection

  I half 2011 Mac mini and an Apple display that uses the old ADC 30 pin connector (3 x 10).  Is it possible to connect them with an adapter?  If Yes, what type of adapter and where I find it?

  You need to match ADC to DVI and DVI / Mini DisplayPort.

  (140884)

• Secondary display does not connect

  Hello world

  I have trouble getting a secondary display to work. The installer worked well on an older Mac Pro until we passed out.

  Now, we use a Mac Pro mid-2012, that uses a DVI output for main monitor. The secondary display is sent from a thunderbolt port to a mini-affichage of a transmitter HDMI to HDMI, then drills down to a level via ethernet to a receiver, which converts it to HDMI for a TV.

  Whenever I connect the mini display of converter for love at first sight, the computer behaves as if she's trying to connect flashing market, switching back and forth between 1 and 2 screens. It just keeps going black, showing black desktop, two desktop computers, never until that I disconnect the converter mini display.

  Anyone have any ideas why? The Setup program has worked well on the previous computer, a 2006 Mac Pro, using DVI to HDMI instead of the mini HDMI display. I also tried to use the DVI on the new port and the same result.

  Thank you!

  The Mac requires the display to meet an initial query with its name and capabilities.

  No answer = no image.

  HDMI is for TVs, then your box of stunt may not have implemented the secondary channel required to connect to the computer and ability to react on it.