Independent migration of LWAPP and dynamic interfaces on the controller 4404

Similar Questions

• Is it possible to migrate an application and drop one of the three types of plans?

  Migrating applications is 11.1.1.3 to 11.1.2.2.300.  Try to migrate an application and a company wants to only 2 of the 3 types of regime to be brought back.  Is there a way to do this?  Or to remove or hide the type of 11.1.2.2.300 if all 3 are migrated on?

  Here is what has been tried, but he cuased a problem in the DB:

  • Migrate an existing application that originally had 3 types of plan. Plan dropped type 1 and kept plan types 2 and 3
  • Created 2 types of plan when creating the application in 11.1.2.2
  • Initially built the contour using 11.1.1.3 LCM export dimensions and had to modify the XML to import. Edited plan 2 and made this plan type 1. Edited plan 3 and made this plan type 2. Had problems with the LCM/xml and finally finished by using the extractor contour and loading by using the outlineload utility. Dimensions are now based.
  • Initially, wrong Bishop Calc. To change the value of the hsp_systemcfg for the type of plan table = 2 instead of 3 as it was in the table.
  • Calc Mgr shows that type of plan 2 and no plan to type 1.

  Any ideas?

  Probably the best way to rebuild the application and then reload the hierarchies or hack files XML of LCM, if 11.1.2.3 then you would be able to create/delete plan types.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• How to reorganize the field that was dynamically created by the controller

  Hello
  
  We have created a field (of 'Style' = > 'MessageChoice') in the page using the declaratively controller and also where we dynamically attach a View object to the field based on certain conditions.
  
  The hard part, that we are facing here is that we couldn't a replenishment of the field through customization because the field is created via controller because we don't see not any which column.
  
  Can someone help me please how to reorganize the field by the controller or any other way to do this?
  
  
  Your suggestions are very appreciated.
  
  
  With our thanks,
  Trehout

  Depreciated, the method will not be supported or will be obsolete in the future provided.
  don't worry about the depreciation methods. His will not touch you in the near future...
  Because the whole ofa technology is amortized now... ;)

  Yes, if the item is part of a specific region use as a handle.

  Prasanna-

• Static and dynamic NAT at the same time?

  Is this possible? Let's say you have 20 public address pool and you have 30 computers LAN. You want to assign the same public address for some of the servers. And the rest can get the addresses of the pool at random.

  It would be nice if we can easily do the appropriate firewall rules.

  Yes, it is possible, you can use nat and global commands for dynamic conversion and use the static commands for static translation at the same time.

  Here is an example:

  Public rate IP-range outdoors: xxx.xxx.xxx.0/27

  (IP addresses are xxx.xxx.xxx.1 - xxx.xxx.xxx.30)

  Private range of IP addresses on the inside: yyy.yyy.yyy.0/24

  In the example I'm going to static translate xxx.xxx.xxx.2 to yyy.yyy.yyy.2 Server1 (ditto for server2, but by using adresse.3)

  All other IP addresses is translated dynamics.

  Here is an example of how you can do this:

  IP address outside xxx.xxx.xxx.1 255.255.255.224

  IP address yyy.yyy.yyy.1 255.255.255.0 inside

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 yyy.yyy.yyy.0 255.255.255.0

  Global 1 interface (outside)

  public static yyy.yyy.yyy.2 xxx.xxx.xxx.2 (indoor, outdoor)

  public static yyy.yyy.yyy.3 xxx.xxx.xxx.3 (indoor, outdoor)

  access-list deny ip host yyy.yyy.yyy.2 sheep all

  access-list deny ip host yyy.yyy.yyy.3 sheep all

  access-list sheep ip allow a whole

  Kind regards

  Leo

• Display static and dynamic photo using the Structure of the event

  Hello everyone,

  I need to display a static image with an event and then using another event, I need to keep displaying the second photo, while the first is still displayed. Simply speaking, in the attached example, I would like to have the color circle black fixed while I dynamically change the red circle.

  My attempt is shown in the attached VI with the first approach using the shift register and the second using the property node (value). Both do not work. Does not erase the previous red circle, or the black circle also gets deleted.

  I'd appreciate any help in this regard.

  Thank you

  From what I see here, you must have two shift registers, one for each circle you try to draw.  You just update those who need update inside the corresponding event.  Use then Cancatinate string to combine the two images.

  Other things to note:

  Put the terminals of your controls in their case of discipline.  This ensures that you are using the most recent data instead of the outdated data.

  The Stop button event take the changed value.  Yet once, put the terminal inside the event.  This will allow the latch to work its magic.

  Them would like to see photo subVIs RADIUS be I16 instead of DBL.  I recommend that you change your cursors to use representation I16.

  

• Migrate CUCM, CUP and CUC VMS from the physical server Dell to a UCS

  Hi all

  We have 3 virtual machines from one physical server to Dell, we want to migrate those virtual machines from a server of the UCS.

  Reference Dell physical server:

  Model: PowerEdge M610

  UCS: Version of UCS B200 M4 3.0 (2 c)

  I was wondering if just copy all the files of the virtual machine to another server or there is another procedure to do this... and also we need new licenses of vmware?

  Thank you very much!!

  Kind regards!

  ESXi licenses is up to you, you might have bought it so that the UCS, or buy directly from VMWare, but you need to license.

  As for traffic, if you have vCenter, you can move the virtual machines using it (vMotion and/or Storage vMotion), or if not, you can perform a cold migration.

• Migration 6i form and reports 6i to the more recent form

  Hello

  We designed our software internally from 6 to 15 years, which is subsequently migrated to Form 6i. Now I want to migrate to the latest platform. is there anywhere I can migrate all of the in-house developed project to the last platform.

  again to rewrite the code will be difficult because there is a lot of logic is involved.

  Sandy

  Although generally, it could be easy, this is not always the case. We tried, in vain, for a week to get just the login form to work in a 6i to forms 11g migration.

  Migration of the same form of 6i to 10g was not a problem, but to 11g 6i proved impossible for reasons unknown. Here's my old topic on sound:

  Forms11gR2 jumps logon

  After that we just decided to completely ignore the forms. It's really a good decision, because migration now to the Apex will give us the ability to clean a lot of junk in a 15 year application.

• WLC - slot configuration of the dynamic Interface DHCP settings

  Hi guys,.

  If I have a dynamic interface that is connected to a subnet where the router interfaces have DHCP servers configured under the orders of support address, do I need to configure the DHCP fields in the dynamic interface configuration?

  I have the support address configured on routers connected AND these fields configured with the same DHCP servers.

  I was wondering if I can take the IP address of the configuration of WLC?

  Thx a lot indeed.

  Ken

  Ken, the DHCP address in the dynamic interface, is the address the WLC is unicast the DHCP request when a client tries to use this interface. In normal operation, this address is needed. Is there a way to get the WLC to fill the package to the wire to make it a show instead of a unicast packet. CLI command is dhcp proxy disable config.

  But I think that even if you issue the CLI command, the software wants the DHCP address in the dynamic interface.

  HTH,

  Steve

• Mappings of dynamic interface of SSID in the AP groups

  Hello, I have a few questions about the mapping of the SSID to the interfaces within the AP groups.  My controller runs 7.4.110 and has about 150 APs configured on the controller.

  5508 pair UNIQUE for all APs authentication mode

  50 are on the same campus as a controller. (APs in Local Mode)

  100 are 40 other WAN sites. (APs to FlexConnect Central, site based authentication DHCP)

  3 SSID broadcast to all sites

  Corp - 802. 1 x

  Warehouse - Auth WPA2-PSK-Mac

  Reviews - wide opening with a Cs & Ts that you accept very similar to a hotel

  Controller interfaces

  Management interface

  The warehouse - dynamic interface

  Customer interface - dynamic

  I have set up groups of AP for each remote location. My question is this:

  For these places distant in the AP group configuration, should I maps all the SSID to the management interface, or I should map it to the dynamic interface?  I.e. to Corp.--> Management, warehouse--> warehouse, guest--> comments.

  For local access points, I do the SSID mapping for each interface, but I don't know that it's important for my remotes.

  Help is greatly appreciated.

  For your remote offices FlexConnect APs.

  If WLAN is configured for local switching, then users will get IP of the interface that you corresponding in the mapping section vlan in the AP configuration. (interface by default yield under general WLAN or the AP group WLAN configuration section is not a problem)

  If WLAN is configured for central switching, then you must assign a correct dynamic interface under the WLAN-> General section or AP group WLAN configuration.

  Below material Ciscolive will give you good overview of all the available option & design guide.

  BRKEWN-2016 Branch Office Architecture wireless

  HTH

  Rasika

  Pls note all useful responses *.

• Dynamic link between the first problem and speedgrade CC 2014

  Hello Eveyrne!

  I have trouble to back and forth from first to speedgrade. For example, I can send the images to speedgrade, my image quality and come back to the to first with my settings in place. However, how to get back in the category of speed (of creation) if I need to add a finishing touch? It seems that the only options are just all send in grade speed once again, but there my previous settings in place I start from scratch... I hope I made that clear.

  Thank you

  Mike

  Moment of clarity: is the link Direct from PrPro/Sg and dynamic links to the PrPro/Ae. They are not even close to the same process of sub hood, and due to the proximity of the nomenclature selected to more trouble they should have created. Adobe LIKES having both be a 'DL'... and 'their' it is very clear. Given that we users like usually jump using long verbiage... including the two acronyms it is STUUPID on someone the part but oh, that's just my personal opinion spouting off here... and Yes, I spoke with members of the staff of Adobe in the conversations of real (like many others) life and 'they' know my thoughts. So I'm not dissing anyone here that I haven't talked... and laughed... on this subject in person.

  Then... you can take your project in Sg, grade it, click on the back of PrPro icon & return to work in PrPro, but when "send you to Sg' to return to the Sg of the prior work does not appear?

  If this is the case, it's weird and NOT expected behavior. I go come & constantly back... sometimes within PrPro, sometimes actually just starting Sg and choose a project of PrPro I know I need to change some more. It is recorded above PrPro, should it show me latest project settings from there.

  To be clear, the process requires that whenever you go forward and backward, to each stage... the project is saved & so updated. If say you let open Sg, even more on a project work on PrPro but does not save, then just raise Sg again... There will be a project file updated yet so that it works on. So... work in PrPro, "send to...". ", the project is saved, & you leave. Work in the Official Journal, either use the 'save' icon or click the 'Return to the PrPro' which requires a backup operation... then PrPro, use it "send to" new requiring a save operation.

  Neil

• Difference between dynamic and dynamic routing issue

  Hello
  
  Can someone let me know the difference between dynamic routing and dynamic publishing in the oracle service bus
  
  Thank you
  Barro

  Hello

  If the outgoing end point is not static or Exchange with the incoming request again for dynamic actions...

  Routing is used for calls for installation (who have asked and answer) that is routing action awaits the response before going to the pipeline of response
  Publish is used for asynchronous calls (which does not hv any answer).

  See you soon,.
  Afonso Gupta

• Static text is much better than the dynamic text with the same font settings

  Hello

  I have exactly the same parameters for static and dynamic text, but the static text seems much sharper. Someone knows why?

  Police: Trebuchet MS

  Size: 30 pt

  Anti-alias for readability

  There is a slight difference, but I would not say much better. Incorporate you the dynamic text characters.

• When playing xbox live and someone turns on the laptop he loses the connection to the server and then resets modem

  when im playing left 4 dead 2 versus and kids turns to the top turn of the page to play counterstrike he says: interruption of the connection to the server and then resets my modem or router

  I had the Charter to come out, they ran the new line and I always have problem help me please

  Hello

  ·         What operating system do you use?

  Step 1:

  I suggest you to update the firmware of the router on the manufacturer's Web site and verify that it helps. For more information on how router update contact your router manufacturer's support site.

  Step 2:

  Try to assign the static IP address for an Xbox 360 and the laptop and check if it helps.

  To assign a static IP address for your laptop:

  one) click Start > Control Panel > network and Internet > network and sharing Center and click on change adapter settings.

  (b) select your network adapter. (if you have more than one list) Right-click on the adapter and choose 'Properties' from the list.

  (c) under "this connection uses the following items," click once on "Internet Protocol Version 4 (TCP/IPv4) to select it and then click on the button 'Properties'.

  (d) click the radio button for "use the following IP address:" enter the static IP address, you want to use in the IP address box.

  (e) press "Tab" when you are finished and that the "Subnet mask" value should automatically populate with the correct value.

  (f) Finally, you will need to enter the IP address of your default gateway and the IP addresses of your favorite servers and auxiliary DNS.

  (g) the default gateway is the IP address of your router. The DNS addresses are usually provided to you by your ISP.

  (h) click on 'OK' to save your changes, and then click 'OK' again on the local area network connection properties window. You have now assigned to your computer a static IP address in Windows

  To assign a static IP for Xbox:

  (a) turn on the console and press "Guide" on the controller to bring up the quick menu.

  (b) go to the 'Settings' tab, then open "System Settings." The dashboard opens and the 'System settings' menu.

  (c) select 'Network settings' in the menu new. Another list of menu options is displayed. Choose "Configure network." This opens the network configuration menu, where you can set a static IP address. Note your IP address, subnet mask and gateway.

  (d) change your settings 'IP' to 'Manual' instead of 'automatic '. This will allow you to manually select your IP address and other settings. It can also erase your current settings, that's why you need to write.

  (e) change the last three digits of the IP address. Enter the same numbers for the subnet mask and the gateway that you saved in step 3. Press 'B' to exit from the menu and save the changes

• Mapping and creating dynamic interface Odi

  Hi gurus,

  I received the new requirement on ODI. I don't know that it may be possible.

  Here is my requirement.

  I'll take 2 tables as follows.

  Table1. : do you have the details of source and target as - target Id, name of the source file, the name of the table

  ID sourcefilename targettable

  ---     ---------------------     -----------------

  1 epm.csv salestable

  currency.csv 2 regiontable

  Table2: details of column mappings as Id, sourcecolumn (from file), the column target (from table).

  ID sourccol trgtcol

  ---     ------------     ----------

  1 ename ename

  1 esal esal

  1 eid eid

  2 countries

  2 currency

  The package should be as executing package I provide (ID) parameter. ID-based it should choose the table of file name and target source from Table1 and get reversed in ODI, interface must be mapped to the end of the mppings of Table2.

  If one can achivable may give some clues please.

  Concerning

  PrakashV.

  PrakashVsalvation,

  It is quite doable with Java or Groovy and the ODI SDK.

  You can find some examples and the code used on the Oracle blogs:

  https://blogs.Oracle.com/warehousebuilder/entry/odi_11g_interface_builder_accelerator

  https://blogs.Oracle.com/dataintegration/entry/automating_odi_development_tasks_using

  Chantal Mangano also wrote this excellent blog and the code to read the business rules an Excel files and create interfaces: Creating of Interfaces of mapping in the ODIDW team Excel spreadsheets

  It should not be too complex for you to change it according to your needs.

  It will be useful.

  Best regards

  JeromeFr

• number of dynamic interfaces in a group of interfaces regarding 8510 controllers

  I have a controller 8510, is it possible to club 130 dynamic interfaces in a single interface group?

  I guess a single interface group can have 64 dynamic interfaces, if there is a way to club 130 dynamic interfaces in a group unique interface, please suggest.

  I suggested to my client to create two interface group, a dynamic group of 64 can interfaces each, but he suggested the following

  1. If the interface of several groups to be created, rules of correspondence ACS must make the same number (access policies ACS allowing only 1 name of Air Interface [interface group] in line with the strategy)
  2. Having several access policy for the Group of users even identify unknown factors in the distribution of access requests between two or more access policies where they the same group of service users

  Hello

  Yes, you just... you can have a max 64 interface in a group of interfaces:

  Here is the reference (table 2): http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-1/8...

  So you cannot combine all the 130 dynamic interface in a group.

  According to my experience: one solution is to use 2 SSIDS and each ssid must have a group of interfaces (64 interfaces).

  Concerning

  Remember messages useful rates