Mappings of dynamic interface of SSID in the AP groups

Similar Questions

• Independent migration of LWAPP and dynamic interfaces on the controller 4404

  We are currently migrating from a stand-alone environment. Access points currently take wireless clients and put

  their right in separate VLANs that SSID that they associate with. Each SSID is another customer

  So we are essentially acting as a service provider. We try not to get involved with the functions of layer 3.

  Each range of IP of SSID is ordered by a customer or a third party. So far, we didn't specify an address from DHCP server, the client is getting on one VLAN and it is up to the customer to assign their own intellectual property details.

  Now that we're migrating to LWAPP I found the following-

  -J' need to specify an IP address for each dynamic IP address for each WLAN

  -J' need to specify a DHCP server for each dynamic IP address for each WLAN

  Because I have no control of the PPE, I put in the details of false dynamic Interface but the correct address of the DHCP server.

  It seems to work.

  My questions are as follows:-

  1 / is there a way I can simply place clients in a VIRTUAL LAN using LWAPP equipment so we didn't

  get involved with Layer 3 configuration?

  2 / I noticed when I got a DHCP address on a test laptop client, the DHCP server is 1.1.1.1. The only thing in the network that I know is the virtual IP address of the controller that is used for groups of mobility. Is this normal?

  3/on the controller is the query DHCP has passed from the management or the dynamic interface?

  3 / What is the IP address of the dynamic interface actually used for? At the beginning I forge the DHCP server use it as a source, but my setup works with a bogus address.

  Welcome to the world of LWAPP! It's a pretty confusing to get, so I hope I can answer some of your questions.

  Before directly answering your questions, I want to give you a little if a glimpse as to how traffic flows in LWAPP environment. All traffic LWAPP is placed in a tunnel to the controller (this is why LWAPP APs is no longer need to switch trunk links). Traffic is désencapsulé and sent to the appropriate interface switching environment (management or dynamic). The source address for traffic is changed to match the control interface for traffic must return to the controller in order to get the customer. For example, IP addresses are required on the controller.

  1. think of the controller as a layer 3 switch that masks the identity of its customers. By sourcing all traffic from itself, it ensures that all traffic comes back to him, how it forwards traffic to the client via the LWAPP tunnel. False addresses you entered are actually being used on the network, then you will want to register those with the people in charge. If someone uses this address, it will eventually drop your wireless network.

  2. it is normal. The virtual IP address is also used for DHCP service. Because the controller blocks all emissions, it must the DHCP proxy for each client, where the virtual IP address as well as the need to specify the address of the DHCP server.

  3. I don't know what interface it gets passed on. Maybe someone else can answer.

  4. see above for a description of what it is.

  One last thing. What, exactly, are these fake addresses to which you refer? They are real addresses which comes with? They correspond to the VLAN that you places on? You give them suitable default gateways?

  Don't forget that by configuring these, they are real addresses on your network that you should be able to ping. And yet once, if the address is duplicated on the network, it has the potential to get to the bottom of your wireless network.

  Let me know if this can help, and if you have any other questions!

  Jeff

• WLC - slot configuration of the dynamic Interface DHCP settings

  Hi guys,.

  If I have a dynamic interface that is connected to a subnet where the router interfaces have DHCP servers configured under the orders of support address, do I need to configure the DHCP fields in the dynamic interface configuration?

  I have the support address configured on routers connected AND these fields configured with the same DHCP servers.

  I was wondering if I can take the IP address of the configuration of WLC?

  Thx a lot indeed.

  Ken

  Ken, the DHCP address in the dynamic interface, is the address the WLC is unicast the DHCP request when a client tries to use this interface. In normal operation, this address is needed. Is there a way to get the WLC to fill the package to the wire to make it a show instead of a unicast packet. CLI command is dhcp proxy disable config.

  But I think that even if you issue the CLI command, the software wants the DHCP address in the dynamic interface.

  HTH,

  Steve

• How to get all of the mappings from an interface in excellent sheet

  Hi all

  
  

  My requirement is to get all the mappings of an interface in excellent sheet. Is there any out of the box application for the information in excel worksheet if it is there any ODI SDK to get the mappings as well as we have a writing a java class to implement the functionality.

  
  

  appreciate your help, thanks in advance.

  
  

  Gael K

  07702262888

  [email protected]

  Hi GG,.

  I agree with Saran, you can create a normal display and the display in the package of odiSQLUnload tool you can fill data in excel sheet

  Try this

  Kind regards

  Phanikanth

• number of dynamic interfaces in a group of interfaces regarding 8510 controllers

  I have a controller 8510, is it possible to club 130 dynamic interfaces in a single interface group?

  I guess a single interface group can have 64 dynamic interfaces, if there is a way to club 130 dynamic interfaces in a group unique interface, please suggest.

  I suggested to my client to create two interface group, a dynamic group of 64 can interfaces each, but he suggested the following

  1. If the interface of several groups to be created, rules of correspondence ACS must make the same number (access policies ACS allowing only 1 name of Air Interface [interface group] in line with the strategy)
  2. Having several access policy for the Group of users even identify unknown factors in the distribution of access requests between two or more access policies where they the same group of service users

  Hello

  Yes, you just... you can have a max 64 interface in a group of interfaces:

  Here is the reference (table 2): http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-1/8...

  So you cannot combine all the 130 dynamic interface in a group.

  According to my experience: one solution is to use 2 SSIDS and each ssid must have a group of interfaces (64 interfaces).

  Concerning

  Remember messages useful rates

• Number max of dynamic interfaces on 4404 WLC

  Can someone tell me if there is a limit to how many dynamic interfaces I can create on a WLC 4404?

  I know that I can have only 16 SSID, so I have set up an SSID for my private network and use AAA Override and configured my radius server to assign the VLAN different for each group. I need to create a dynamic interface for each VLAN individual and I just want to know if there is some sort of limit on the number of dynamic interfaces, I can have when I meet a potential problem on the road.

  TIA,

  Deanna

  I was able to verify that you can only create dynamic interfaces up to 513. This of course does not include your management, your ap Manager or VIP.

  Hope that answers your question... it did for... now me I know!

• Dynamic interfaces for Cisco 2106

  Greetings, I've configured the 4400 front controllers and I am familiar with the terms used, ive recently acquired a controller 2106, I have assigned an AP Manager and management address to Port 1 on the same subnet, and can test the device.

  Subsequently, I have several different VLAN with different subnets I want to provide services as wireless as well as a network of comments.

  So I configured the WIFI network and each its own dynamic interfaces associated with. Each dynamic interface is in turn associated with its own port of the controller.

  Port 1 - AP Manager/Management

  2 - Dynamic interface - the WLAN port has

  Port 3B - dynamic Interface - WLAN

  Port 4 - dynamic Interface - WLAN C

  And so on, unfortunately where configure this I lose connection to the controller, if I put all dynamic and static interfaces on a single port it works fine.

  IM current rapid PVST + on my switches and I'm thinking it may be a matter of spanning tree but necessarily clarification if what im doing is actually possible?

  Concerning

  See this post for more details.

  http://forums.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=Wireless%20-%20Mobility&topic=General&TopicId=.ee6e8b8&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cc0608c

  HTH.

• Dynamic interfaces, VIRTUAL, multiple physical interfaces LAN?

  Hello

  We're just starting with a WLC 5508 and WCS. We can already see that it is a big improvement on our installation current with autonomus AP we are also implementing some 11n AP is in this framework.

  I think I understand the multiple interfaces AP-Manager and balance the load of the average AP in these. But I do not understand what customer traffic should be load-balanced.

  The goal is to have a WLAN. When I create this I select a dynamic interface (and so a VLAN for the customers). But this VLAN is bound to a physical port (with a port of relief). So my understandig of the wil of customer traffic from the AP to the controller on several interfaces, but then goes out to the servers in a single interface?

  It's not what I want - I'd like to that traffic on him VLAN on the servers to be distributed on several ports. How do I do that? I then use LAG?

  Kind regards

  Kaj

  OK, if you don't have that a WLAN you would probably a dynamic interface, unless you use AP group VLAN.

• dynamic interface of NAT (outside, outside), equivalent to IOS

  For a user remote vpn that just want to have access to the internet at the moment. now I know you have to put the following in the config during the use of ASA, what is the equivalent of IOS?

  NAT (outdoors,outdoors) dynamic interface.

  Thank you

  Han

  Hello Han,.

  You are right. !

  Harish.

• Mapping and creating dynamic interface Odi

  Hi gurus,

  I received the new requirement on ODI. I don't know that it may be possible.

  Here is my requirement.

  I'll take 2 tables as follows.

  Table1. : do you have the details of source and target as - target Id, name of the source file, the name of the table

  ID sourcefilename targettable

  ---     ---------------------     -----------------

  1 epm.csv salestable

  currency.csv 2 regiontable

  Table2: details of column mappings as Id, sourcecolumn (from file), the column target (from table).

  ID sourccol trgtcol

  ---     ------------     ----------

  1 ename ename

  1 esal esal

  1 eid eid

  2 countries

  2 currency

  The package should be as executing package I provide (ID) parameter. ID-based it should choose the table of file name and target source from Table1 and get reversed in ODI, interface must be mapped to the end of the mppings of Table2.

  If one can achivable may give some clues please.

  Concerning

  PrakashV.

  PrakashVsalvation,

  It is quite doable with Java or Groovy and the ODI SDK.

  You can find some examples and the code used on the Oracle blogs:

  https://blogs.Oracle.com/warehousebuilder/entry/odi_11g_interface_builder_accelerator

  https://blogs.Oracle.com/dataintegration/entry/automating_odi_development_tasks_using

  Chantal Mangano also wrote this excellent blog and the code to read the business rules an Excel files and create interfaces: Creating of Interfaces of mapping in the ODIDW team Excel spreadsheets

  It should not be too complex for you to change it according to your needs.

  It will be useful.

  Best regards

  JeromeFr

• How can I get a dynamic mic to work on the iMac?

  How can I get a dynamic microphone to work via the usb input? Do I need a plug-in?

  Well Yes, if it is a USB microphone, the support is to plug.  Note, Apple provides an Audio configuration and Apple Midi utility in Applications-> utilities that once connected develops on the parameters in the menu-> Preferences-> sound-> entry

  Some microphones require Mac OS X drivers.  It would therefore be important to determine if yours is a.   Google your brand and model micro with Mac OS X and the drivers of Word to see if someone needs.

• Screen missing on e4620 to enter the SSID of the wireless network

  The SSID of my wireless network has changed and I can't go to the correct screen on my e4620 all-in-one to enter the new SSID.  The network menu Wireless gives me the ability to use WPS that I can't use.  How to input SSID on the printer screen?

  I solved the problem of the printer connected to my computer via a USB cable, and then using the printer setup utility to turn off the PC to a wireless connection.

• The model Interface Toolkit does support the cRIO-9068 again based on Linux?

  Hello, I have a cRIO-9068 and need to integrate a Simulink model in my controller. The model Interface Toolkit does support the cRIO-9068 again based on Linux? Besides, don't Veristand? This page assumes that it is not:

  http://digital.NI.com/public.nsf/allkb/2AE33E926BF2CDF2862579880079D751

  Thank you

  Hi Southern_Cross,

  Based on the readme:

  http://digital.NI.com/public.nsf/allkb/D3F40C101B66128186257D020049D679

  It seems that it is now supported! These resources should provide a few more details:

  http://zone.NI.com/reference/en-XX/help/374160B-01/vsmithelp/mit_model_support/

  http://digital.NI.com/public.nsf/allkb/E552B0CD4E48215586257DF7005BE055

  Please note that NI VeriStand 2014 can't stand it targets NOR Linux in real time.

  Kind regards

• How can I find the network name (SSID) and the chain of security for my network

  I have a wireless network with a printer on it - even if the printer is connected with a wire.  I want my laptop to be able to use the printer wireless to another room - instructions for putting in place early yb requiring the SSID and the security chain.

  Hi petetyler81,

  You can connect to the router manufacturer's website and make sure that the SSID and find the string, otherwise you can contact the manufacturer of the router and check.

  For more information, see the link:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Hope this information is useful.

• Audio on the socket for headphones has a dynamic range very little. The music is piled up.

  Speakers of the laptop to listen to music very well. When I use the headphone music in my headphones has a dynamic range very little. The sounds of music crushed. The strong parties are limited and the soft parts are high until I can hear background noise in the recording. I've never had this problem on any other PC.

  I'm listening on iTunes, Soundforge, and any other audio program.

  I downloaded an updated version of the software for the sound card - that solved the problem.