IndependentPersistent vs unchecked [default] independent labels?

Similar Questions

• VmWare data recovery and work with independent labels

  I read on a forum: If you want to drive the snapshot of the virtual machine is not affected, in its properties, select the "independent". Moreover, if the virtual computer is 'Independent' disks, the snapshot cannot be included in his memory.

  There was a question if the readers to all virtual machines 'Independent', would work "VmWare Data recovery?

  I'm not sure about my discoveries. SO please don't take this as a solution to your problem. My conclusions are:

  When you start to take a vDR of backing up a virtual computer that is configured with an independent record, it will not be successful. As vDR is used to take a snapshot in order to perform the backup of a virtual computer. If the capture is here, Independent disks prevents taking snapshot.

  -GaneshNetworks-

• NetApp Best Practice and independent labels

  Hi, Best practices for VMware NetApp recommends, transitional and temporary data such as comments

  pagefile operating system, temporary files and swap files, must be moved to another disk virtual one

  different data store as snapshots of this type of data can consume a large amount of storage in a very short time

  
  
  

  high time due to the rate of change (that is, to create a data store dedicated to transitional and temporary for all VMS data without other types of data or VMDK residing on it).

  NetApp recommends also configure the VMDK residing in these stores data as "Independent persistent" disks in vCenter. Once configured, the transitional and temporary data VMDK will be excluded from the VMware vCenter snapshot and copy snapshot of NetApp initiated by SnapManager for Virtual Infrastructure.

  I would like to understand the impact of this best practice - can anyone advise on the following:

  • If the above is implemented:
    
    
    • Snapshots will work via vcenter?
      
      
    • Snapshots will work via the Netapp Snapmanager tool?
      
      
    • The snapsot includes all of VM disks? If this is not the case, what is the consequence of not having the whole picture of the VM?
      
      
    • The snapshot of vcenter can restore ok?
      
      
    • Netapp snapshot can restore ok?
      
      
  • What impact the foregoing has on the process of return if using a backup product that relies on snapshot technology?
    
    

  Thank you

  
  
  
  
  
  

  Hi Joe

  These recommendations is purely to save storage space when the replication or backup.

  For example, you can move your *.vswap (VM swap file) file to a different data store. NetBackup can do instant IVMS of the warehouses of data and with this configuration, you can exclude this particular data store

  This is also true if you create a data store dedicated for OS Swap files, mark independent so that vCenter not relieve these VMDK.

  I did a project with NetApp on boxes of SAP production

  We moved all the files in *.vswap to warehouses of data created and dedicated RDM for the OS Swap locations

  We actually used the SnapDrive one NetApp technology to suspend the DB SQL on the ROW before the ROW is broken, but I won't go into too much detail

  To answer your questions (see the comments in the quote)

  joeflint wrote:

  • If the above is implemented:
    • Snapshots will work via vcenter? -Yes it will be - independent drive gets ignored
    • Snapshots will work via the Netapp Snapmanager tool? -Yes it will be - snaps the entire data store/LUN
    • The snapsot includes all of VM disks? If this is not the case, what is the consequence of not having the whole picture of the VM? -No. - *.vswap file is created when the VM is started (no need to backup)

  -OS Swap VMDK of location must be re-created in the case of restoration. WIndows will be

  always Prime if the Swap disk is missing, and you specify the new location of swap.

  • What impact the foregoing has on the process of return if using a backup product that relies on snapshot technology? -These backup products use vCenter snapshots and because the vCenter snapshots works 100% it shouldn't be a problem.

  It may be useful

  Please allow points if

• What are the effects of the use of independent labels (persistent last-born vs) in sight?

  We have a problem were user profiles continue to accumulate on the desktop display used in laboratory environments where multiple users connect. I don't want to delete the virtual machine when a user disconnects, because we're in an educational environment were we have 30 + students logging in and off every hour. For a lot of activity on the back-end for my tastes. I would use the last-born independent disks disk mode. It is available in the virtual machine settings in the VI client. This will outline the hard drive to it original state after it is restarted. Anyone used this feature with a view? I noticed that this is not a feature of the view itself, so I was wondering if it was by design and if I use it if it will cause me problems.

  Thank you

  Ty

  I used the mode of non persistent disk in without any problem. One thing to watch is the computer account AD password age. I came across a situation where it has been updated in AD, but my non-persistent drive had the old password. I ended up having to join the domain for all desktop computers. You can disable this via a GPO and it should go. Since you have many users connect you can set desktops to reset every night, so don't be the sizes of drive out of control.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• R610 Perc 6 / i Can I have matrix Raid and independent labels?

  My R610 with a Perc 6 / I can take 6 physical disks.  I want to create a raid 1 with the first two discs, then install 3 drive more that BONES can see and use in a storage space.  However, I can't figure out how.

  I have my setting up a raid and windows installed and I have the other 3 drives inserted, but Windows does not see them.  Maybe that's not possible, but I wanted to ask if anyone else had any ideas on how to make this work.

  Thank you.

  PERC 6 is not compatible no RAID, so if you want to use these disks separately, you must configure each as a single drive RAID 0.

• Dependent files by default the button dialog box

  Sometimes I think I was halucinating, but...

  I could have sworn that when I first installed Dreamweaver CS6 the default button on dialog put dependent files is 'no '. And then one day by default become '' Yes. '' I almost feel like I've hit a few mystical key-combo that changed his behavior & mine. Hmmm.

  So is it possible to change the default button on the 'no '? That would be my preference.

  Thanks in advance!

  OS X 10.8.1

  Dreamweaver CS6 new v12.0 build 5842

  butisitart wrote:

  I'm going crazy? I was halucinating? I dreamed all this?

  I couldn't possibly comment.

  I remember to write something on the work of dependent files many moons ago so I checked my "Essential Guide to DW CS4" and found a gem of information that I had completely forgotten.

  The default value for the dependent files is no however...

  If you uncheck the box labeled "FTP transfer options: select the default action in the dialogs after [30] seconds", guess what happens?

  You have... Change the default yes.

  God only knows why this happens, but check this box again, and your mental health should be preserved for some time yet.

• Hi I seem to be unable to get out of safe mode, I think I may have wrong bios config I tried the default settings. When I turn off computer sometimes a blue screne flases__

  I can't get out of safe mode, I think I messed up in the Woods, that a blue screen also flashes when I restart

  For ANY BIOS problems, contact your computer or the manufacturer of the motherboard.

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Table of contents > Vista:

  This link is to enter; Follow the tips below to get by:

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard.
  4. The System Configuration utility will open and you will see a screen similar to the one below.

     
     Figure 8. Vista System Configuration utility

     Click the Startup tab.

  5. You will now be on the screen start as shown below options.

     
     Figure 9. Tab of Vista startup in the System Configuration utility

     UNCHECK the box labeled Start secure

  6. Press the apply button and then press the OK button.
  7. Now, you will see a prompt stating that you must restart the computer to apply the change.

     
     Figure 10. Reboot prompt

     Click the restart button to restart your computer.

  See you soon.

  Mick Murphy - Microsoft partner

• Put a % sign in a label (Table column)

  Hi all

  I created a very basic dashboard of the percentages of availability for the service display.  The default (medium) label appears as availability average reference (%):

  

  I changed it has something a little more meaning to our customer:

  

  However, it would be good to put in something like percentage of availability of Service (target 99%), but I can't get the % symbol to display.  I tried to use the backslash % (-%) to comment out a special meaning, but it does not work and the default label is displayed instead.  Does anyone know how to display a "%" symbol in a table/column label?  I also tried a double backslash, double percentage, single and double quotes, brackets...

  Thank you

  Brian

  I took an additional screen shots. It is the foglight 5.6.7 version. Note the label for the column.

  

  

• DTS and independent discs.

  Global: How activate DTS move independent disks on vSphere 6.x device

  -For some reason, we create all the VM with a persistent independent drive.

  -We would like to 'solidarity hard disks.

  In this case StorageDRS is unable to do its job, create a recommendation and migrate disks of one volume to another (all VM contains DTS unable to move independent labels and independent labels).

  There is a cheat for vSphere 5.x - "a vpxd.cfg option sdrs.disableSDRSonIndependentDisk. "When specified and set to false, storage DRS will move to independent disks" (q) DTS Interview Questions | Virtual reality

  > Note: this only works for independent non-shared drives.

  Yes, it's ok, we don't have all the independent shared disks.

  But the file is modified in vSphere 6.x vpxd.cfg format device, now it is of type xml.

  And I still can't find how we can enable this option.

  Help, please.

  OK, after a bunch of tests, I found, the buildings should work.

  Must insert in to before /etc/vmware-vpx/vpxd.cfg "" following lines:

  fake

  and then restart the service vmware-vpxd (beware, you have lost connection to vcenter in this time).

  At least before I had in /var/log/vmware/vpxd/vpxd.log:

  2016 05-11 T 15: 10:41.449Z of information vpxd [7F86C02C2700] [Originator@6876 sub = drmLogger = task-internal-2-73cbac2a-d5 opID] CreateDrmDisksForVm: device for ${name} VM vm 2002 DTS OFF for independent

  for each virtual machine, run each DTS.

• Read all labels on stage without name dynamically knowing or time

  Hello

  I'm working on the creation of a 'combination' code snippet that can dynamically pull the names and locations of the chronology of default stage to be used in a pair of front/rear button.  I can see this information in the javascript _edge file, but my coding skills is not enough to pull this information into a usable table.

  I am comfortable using getPosition and getLabelPosition.

  I found extracts used to work but the work is longer, such as:

  var stage = sym.getComposition().getStage();

  var labels = stage.timelines['Default Timeline'].labels;

  I then used command of jquery's .each $ to the view, but I was unable to make it work.

  Thanks in advance for any help you can provide!

  Here is the code that I finally got to work after playing for a bit (it is a button that jumps to the front of the label to the label):

  var stuff = sym.getComposition (). sym.stage.timeline.labels;

  loc var = sym.getPosition ();

  var ext = 0;

  $(stuff, fonction (lab, pos) {} .each)

  If (ext == 0) {}

  If (loc< pos)="">

  SYM. Play (Lab);

  EXT = 1;

  }

  }

  });

• Base powercli export VM info &amp; find independent disks?

  Hello

  I'm looking for two powercli database work and wonder if I could get some help here

  First thing I'm doing is basically a list of all the virtual machines, GuestOS and IP addresses. I tried to use it but cannot operate unless I specify 1 vm?

  $Report = @)

  $VMs = get - VM | Where {$_.} PowerState - eq "Receptor"}

  {ForEach ($VM to $VMs)

  $VMView = $VM | Get-View

  $VMInfo = {} | Select VMName, OS, IPAddress

  $VMInfo.VMName = $vm.name

  $VMInfo.OS = $vm. Guest.OSFullName

  $VMInfo.IPAddress = $vm. Guest.IPAddress

  $Report += $VMInfo

  }

  $Report = $Report | Sort-Object VMName

  $report | Export-Csv c:\output.csv

  Secondly, I am trying to run a powercli script to find all the independent labels. I can't find anything that allows me to get that? any help appreciated here

  Thank you very much

  $VMs = get-cluster-name 'Cluster001 ' | Get - VM | Where {$_.} PowerState - eq "Receptor"}

• Weird color in LR5.3 - Mac OS 10.8.5 label

  After trying everyday to the correct defects in an old scan of a photograph yet oldest, I dropped. In frustration I typed (in the name of copy field) the words "I quit!" It is then that I noticed that this tiff image had a WHITE label. The label will go with copies, but it shows as a "nil" label in compare mode or develop fashion.

  It is, of course, unimportant, I could easily change the label. However, I am curious to find out the cause.

  Here is a screenshot in library mode.

  

  all advice welcome.

  Thank you

  Vince

  Vince, the label displayed in white when the assigned label text does not match the text in the label set.

  For example, the default value of Lightroom active defined label, assign the red label to an image and it will show red, of course... but if you then change the color to something labels set, for example gateway by default, that label will turn white because that the label text you assigned said 'Red', but the text associated with a red label in all of the default gateway is actually "Select".

  Hope that makes sense. Check the text of the label in the metadata Panel, then check what rule label you use (menu metadata > color label set).

• a machine with an independent disk snapshot

  The point of independent labels, is that "they are not affected by snapshots. It's just what I like to do. Take a snapshot of the machine, but does not include one of the disks.

  Taking a snapshot, however, is not possible at all. The error message is:

  "Error: not took a snapshot souvenir, since the virtual machine is configured with independent labels.

  Can I somehow excluded the snapshot memory in vmware server? Or y at - it another way to get this instant part-time work?

  In any case if this is not possible I see no use of the discs ' independent / persistent ' at all...

  Concerning

  Manfred

  It is not the case that a snapshot for a virtual machine with independent labels must be crossed with the virtual machine is shut down otherwise it will not be a true snapshot at this moment because the independent disc, due to not being instantaneous, will not be captured? I had the same recently, when I created a VM Win7 with a second drive independent, for the packaging of App - V 4.6, and I got this error when taken snapshots with virtual machine running but he was fine, when I stopped him.

  This is based on my own theory based on my observvations so I could be wrong...

  --

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• How to add values by default when you add a component customized for fashion design?

  I have a set of custom (in general) components that extends spark components. But when you add our custom mode component creation, how can I set defult (in AS3) values.

  For example, s:Button default = "Button" label when adding application, or mx:DataGrid has 3 predefined columns, but when you use custom components there are no presets like this.

  I can put these values in the constructor, but they are not visible at the time of the design, only run time.

  Any ideas? Thank you

  Esmin

  Yes. Either way, I found the solution. Someone might find this useful.

  In the light of the design.xml

  Use this

         

     

  so when you add this component to the design mode, it will be the text value ("ExtendedTextInput" in this case).

• Dynamic masking action does not hide the label - Apex 4

  Hi, does anyone else have this problem? When I create an action to hide/show for several items based on a selection list, on the event to hide the label of my question remains. I know that I can add the items in a region and hide the entire region, but surely, the skin must hide the label of the item as well. Is this a bug?

  Hello

  I see what you mean. There is 1 template in the Optional default 15 ('Label') theme with help that is missing the tag 'label' and 'for' attribute you need. I would like our theme / template that developers. Thanks for reporting this.

  For now, you can move quite easily by changing this model. Add the following code at the beginning of the "definition > before Label' value:"

  And this at the end of the value of the Label 'after ':

  Kind regards
  Anthony.