Hi... hp officejet pro 8600 white Panel

Similar Questions

• HP Officejet Pro 8600: Control panel display

  Hi, the control panel (screen) of my printer is blurred, it is impossible to work or that you configure. I've been connected UBS cable and wireless. I used HP Scan doctor, but I have not found solutions. Thank you!

  Hi @romodos,

  I understand that the control panel display is blurry. I want to help you.

  Make sure that the printer is not exposed to an electric or magnetic field.

  Please, try the procedure described in this document to see if it will help to solve this problem. Do not take into account the title.

  HP printers - printer screen is black or white.

  If the problem persists, go to the Web built-in to the printer server and turn off IPv6, to see if it will be useful.
  Type the IPv4 address in the address bar of your web browser. (Internet Explorer)

  Click on the network, on the left side tab, select network protocols, and then select enable IPv4 only, apply the settings.

  Here is the link to print a Configuration page to obtain the IPv4 address.

  HP Officejet Pro 8600 (N911), 6600 (H711) Officejet and Officejet 6700 (H711) Premium e-All-in-One Printer Series - printing a Network Setup Page.

  If the problem persists, please Contact the HP Support for help. Check the model number and the form to receive a file number for faster assistance.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• OfficeJet Pro 8600: White scan Pages of the feeder of the Officejet Pro 8600

  Trying to browse the food tray, scanner empty pages. Analysis on the flat. I tried to restart the laptop and printer also does to unplug for a minute.

  Hey @cornerstone1,

  Welcome to the Forums of HP Support!

  I see that your Officejet Pro 8600 e-all-in-one printer is the digitization of the blank pages to your machine in Mac OS x 10.8. I can help you with that.

  First of all, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once this is done, we will do a few things to refine the question. To do:

  1. Place a page with printed face down on the flat.
  2. Place a page with different print material face up in the ADF Document (CAD).
  3. Make a copy of the printed page.

  The next steps will depend on what is printed.

  If the printer made a copy of the page on the flat:

  The printer does not detect anything in the charger. Try to insert a blank sheet of 8.5 "X 11" or A4 paper and see if you hear a noise or identical to "document loaded Original" message. " If you have not the printer will need to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  If the printer did a Virgin copy:

  Take a blank sheet of paper, write a 1 on one side of the sheet and number 2 on the back side. Then insert the paper in the tray and make a copy. If you still see a blank page then the printer will have to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  If the printer made a copy of the page in the ADF:

  There is a problem with the drivers scanner on your Mac. To correct this:

  1. Unplug the USB cable from the printer, if it is connected to your Mac.
  2. Click Apple, system and print and Scan preferences.
  3. Hold down the CTRL key and click on the picture of the printer on the left.
  4. Click on reset printing system.
  5. Open Applications and your Hewlett-Packard folder.
  6. Launch the HP uninstaller.
  7. Open Applications, utilities and disk utilities.
  8. Click "Macintosh HD" on the left.
  9. Click on verify disk permissions. This should take about 10 minutes.
  10. Click on repair disk permissions. This should take about 10 minutes.
  11. Restart your Mac.
  12. Download and install the latest drivers by clicking on this link.

  At this point, you should be able to scan from the ADF.

  Please let me know if that solves your problems by clicking on accept Solution below my post or if you have any other questions. If not, have a great week!

  If you appreciate my help please click on the icon below my post thumbs up.

• OfficeJet Pro 8600: Small panel light fading

  The small light panel that allows me to choose to fax, copy, scan etc is fading and becomes hard to see. How can I fix to this please?

  Hi @JM178,

  Welcome to the Forums of HP Support! I see that you have problems with the light on the screen. I want to help you. If this helps you to find a solution, please click on the button "accept as a Solution.

• OfficeJet Pro 8600: central panel display

  My screen has disappeared since I can't read it. When I restart, the screen is initially full of color, but quickly melted very light - can not distinguish even the icons and text

  Thank you

  Hello @LoganNEand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having display problems. I would like to help!

  I would recommend starting with a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I would recommend also to plug the power on the printer to another.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• OfficeJet Pro 8600. Printing a list of todo in black and white

  I have the OfficeJet Pro 8600 more and I use an iMac, OS 10.92.

  I want to print a list of Todo comics in black and white rather than in color. (This is a todo list [i.e. Gaston ToDo] available in the applications in the HPePrintCenter).

  I don't see a setting that allows me to set a preference to black and white.

  Suggestions, please.

  Thank you.

  Lynn

  Hello lovemutts,

  Thank you for being a member of the HP support forums.  I see you want to learn more about the print settings with one of printing applications to which you are subscribed.

  I've included the document Getting Started with Print Apps and at the request of delivery print Apps .  In the section titled "Managed print Apps" is a sub-section titled 'print settings.  In there, it says "On some printers connected to the web, a settings option is available on the screen of the print Apps Print Preview mode that provides options to select the type of paper and print quality."  If the application you are using does not offer this option so that you will not be able to change all the predefined print settings.

• Control Panel more HP Officejet Pro 8600 not lit and will not work

  Control Panel more HP Officejet Pro 8600 not lit and will not work. It worked except the last 4 days. I can use certain features of the computer as a scan but can not manually use Control Panel. Nothing DOES not illuminate. The power button is on but only weakly.

  Hi kwhofms,

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• OfficeJet pro 8600: not possible to change the scanning of the Panel of the printer resolution settings

  With my Officejet pro 8600, there is no possibility to change the scanning resolution settings when you are working in the control panel of the printer (not present button to touch) when I want to scan to the computer, while in the manual it is mentioned that, after pressing the Document Type, it should be possible to reach the resolution to change the resolution of the scan setting. On the other hand, when the scan to a memory card the button change the resolution settings is present.

  Sometimes for the scanning of all computers to select (winXP SP3 installed on it). The HP printing software is installed on all computers and manage digitization to the computer is turned on. It is possible to change the resolution settings when using my computer with the HP printing software, but as I said not in the use of the printer.

  Thank you to help you solve the problem!

  Hey mk75053,

  Scanning to memory card has the parameters of resolution through the front because that is the only way for the device perform this type of analysis.  However, to change the resolution settings for the Scan of the computer, one will have to perform scans through the software installed on the PC.

  I have all three types of 8600 models where I am located (base, more high quality) and of all printers simply ask to start the analysis after selecting the scan type.

  I hope this helps.

• OFFICEJET PRO 8600: PRINTING BLACK AND WHITE ONLY

  Printer does not print in black and white only, even if this option has been selected by "Printer properties" or "Printer Preferences".

  Please read this post then provide some details.  There the error messages on the computer screen or the printer?

  The Officejet Pro 8600 series has separate heads for printing and ink supplies.  To protect the print head of damage the printer requires all inks to be present to print in black only.  If one or more of the inks are exhausted, they must be replaced to allow printing.

• HP Officejet Pro 8600 scans appear in white

  Hello

  My HP Officejet Pro 8600 scan correctly, either from the document feeder or the dish. The scans appear almost totally blank, although some weak contours are barely visible along the top. Two computers use the scanner (Mac OS X 10.6.8 and 10.7.5) and both have the same problem. Any suggestion would be great!

  Hi ABverr,

  A hard reset can solve this problem.  To do this, unplug the power cord at the back of the printer when the printer is still on.  Unplug the other end of the power cord.  After 60 seconds, plug it directly into a wall outlet, and then plug it into the back of the printer.  Try a scan.

  If this does not help, I linked a document with measures to correct the problems of quality of scanning.  Click here

  If the problems persist, you can download and run printing HP and doctor Scan.  Click here  Let me know the results.

  Good luck!

• HP Officejet Pro 8600: My printer prints white

  I had a problem printing for the last 2 days. I feel, but it comes out of the Virgin. Also, I am receiveing a message which reads - print non-aligned head. I took out the printhead and put again and it's still not printing. Help, please.

  Try here.

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8600-e-all-in-one-printer-series---N9/4322914/model/4323658/document/c04113542/

  Let us know.

• OfficeJet Pro 8600: Printer offline and HP Support for Windows 10 don't come upward

  I'm trying to scan pictures to my computer.  Have upgraded to windows 10. My printer is connected wifi.  I bring the printer in Control Panel, set up my printer and it says printer is offline.  Indications are no good they do not appear to be implemented for users windows 10. When I try to go to the hp support for windows 10, I have just a white screen.  I am very frustrated.  I can print to the printer, but he won't let me not scan to the computer, and that's what I need.

  Hi @Procats,

  Welcome to the HP Forums!

  I understand that you cannot scan on Windows 10, with your HP Officejet Pro 8600 printer. I'm happy to discuss this issue scan for you!

  Please, try the following steps:

  Check the connection of the printer on the network and troubleshoot any problems with the printer, router, installation or connection.

• Re: HP Officejet Pro 8600 Plus print but not scan

  I'm on Mac OS X 10.6.8 and recently bought an OfficeJet Pro 8600.  It worked fine for about a month, and then we moved into a new House.  Now, it print but not scan to computer.  It scans email fine.  Same problem wired or wireless.  It is said the computer Scan is not enabled.  When I try to activate scan to the computer using the HP utility, he runs for a long time and then says that the connection has been lost.

  Hi mpk1969,

  Mac OSX:

  Try the following steps.  If you want to learn more about your product, click here.

  How to perform a scan: OS X v10.8

  1. go to the HP utility to 8600 of (Preferences system, scanner open, click on the utility tab)

  2. under scan settings, click scan to the computer

  3. make sure that a check mark beside enable scan of the computer

  4. click OK in all the dialog boxes and of proximity

  5. try scan of front panel

  Follow the steps below

  1. open System Preferences

  2. Open Print & Fax

  3. in the white box under printers right-click and select Reset Printing System

  Note: resetting the printing system will remove all printers in the print queue

  4 restart the computer

  5. Open Print & Fax and then click the + to add the printer to the print queue

  6. open the HP utility, and then click Scan to computer to make sure this option is

  Try scanning the computer to the printer and let me know what happens?

  Windows:

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://www.HP.com/go/tools

• OfficeJet Pro 8600 does not scan full page legal-size

  I have seen this question several times in these forums, but solutions do not apply to me - I can not find the applications or the settings or patches do not resolve the problem. I am running Windows 8 32-bit with a HP Officejet Pro 8600. When you scan a legal size document, the entire page is not scan, even when I select a custom size. The bottom is cut roughly where a letter size page would end.

  If you respond with a solution, please be very specific, i.e. If you say "Control Panel", you mean the control panel of Windows 8 or the small touch screen of the printer itself? If you want "pull me up to the HP application", please say that the we - there are several installed on this computer, and I've tried them all.

  

  Thanks in advance...

  In fact, the problem was located. I is broke and finally called HP support. It turns out that, contrary to the information that I have seen elsewhere, legal size paper MUST be analysed the ADF, not the dish. You can see a white band across the plateau where the search starts. The dish is physically unable to accommodate legal communication. Once the original is loaded in the ADF, the size of the document options now include legal communication.

• How can I re - position the HP Officejet Pro 8600?

  How can I re - position the HP Officejet Pro 8600? The control panel is too high! It seems locked.

  Thank you in advance.

  Get behind the middle of the bottom of the 'Control Panel' and press release to return the array of command in the "normal" position Please see below;

  

  Please click the White Star of KUDOS to show your appreciation