InDesign CC: Text in editable text fields in the process of disappearance after export

Similar Questions

• Text in the text captions in the process of disappearing in Captivate 6

  Hi, we have a problem of corruption. We use Captivate 6.0.1.240. The text in the slide captions disappear when we open the file. And it is only the text itself, the text box is visible. When you look at the film, the text is there, and if we select a legend on the blade and move it, the text appears again. However, if we do this, save and close the file, the text will disappear from the slide again once the file open.

  These files as summer created in CS5, we later moved to CS5.5, then knit using 6. My colleague and I are working equally between 32 and 64 bit.

  If someone has had this problem before or someone knows a solution for this problem? This is getting very frustrating because all our files have been to corrupt as apparent that without reason. Thank you.

  Hello

  Welcome to the Forum from Adobe.

  You can try copy paste all slides empty new project.

  Also try to make a new empty project and insert a text caption and check whether you are faced with the same question.

  Thank you

  Loveesh

• Form multipart with fields in the process of disappearance; best practices

  I have a very complex shape with about 500 fields divided into about 25 groups of tabs. Not all fields are applicable, or any tab groups.  There is an integer variable 'type of form' which determines which fields are applicable.   I have the ability to place a special character in the database for a field indicate that it is not applicable.

  The visible fields are overlapping sets, i.e. a, b, c may be visible in a condition all in b, e, f are visible in another.

  It is not enough to turn them off, I want the fields not applicable to disappear and to not leave an empty spot on the Panel where they would be displayed.

  I looked at the STATES, but the complexty of the overlay defines overwhelmed me.  I was worried that everything would be good for a few games, but most have been implemented, I'd get too complex code to debug and maintain.

  The best solution I can think of is to adjust the height to 0 if a field is not applicable.  Since I had subclass the form widgets flex for other reasons anyway, it's not too hard.  It just seems like there should be a better way.

  Can I use Flex 3 or 4.  Any suggestions?

  You must define includeInLayout to false too.

• Add the date and time to a text field when the form is submitted

  Is it possible to add the date and time to a text field where the user is clicking the button of form submit?

  I created a custom send form button and do not use the distribution process to collect the results and would like to have a time stamp of when the form has been sent.

  Thank you!

  Sure. Before your submit order add a command run JavaScript with this code:

  this.getField("SubmitDate").value = util.printd ("mm/dd/yyyy hh: mm", new Date());

  Change the field name or date that required such boss.

• Default properties for the text field of the PDF forms

  How can I set the default properties for the text field?  The creator of forms set of font sizes that are too large.

  Right-click on the field > use current properties as new default.

  It will keep the new settings until the next time that you do this. It is not specific to the document. Do it separately for each field type (text, button, etc.)

  

  On an existing form, you can select multiple fields. A pro tip, is that you don't have to close the properties to move from the field to the field to the field. Dungeon opens and work faster.

• How can we make invisible static value in a text field to the OPA

  Hi all

  I have invisible static value in a text field in the OPA.

  For ex: field contains the value 100 while we manage the maintenance should not display the value 100 or make us the text as invisible field. whenever we submit the interview the value should be passed.

  I made the background color of the text in white field, but it reflects all the text fields. I need to make the text of the particular text as invisible field. Can someone give me a solution for it.

  Use two different attributes (the one that is indicated in the interview to the need - for example, as "the id selected user" or whatever the phrase is appropriate) and a different attribute, which is the mapped attribute.  The second attribute must not be on any screen of the interview (by thus "invisible" for the user).  Write a table of rules that concludes that the value of the attribute mapped on is EITHER static value or the selected/expected value according to some logic is appropriate to make a decision in your model of strategy.

• Limit the first character in the text field to the letter and numbers?

  How can I limit only the first character entered in the text field as the letter H (uppercase) or any number? Thanks in advance.

  function of validateMemberID was a mistake on my part misnamed it. I thought about it...

  At the level of the JavaScript document

  Allow only characters that match the regular expression
  function validatePartialMemberId (value) {}
  return / ^ [H0-9]?\d{0,10}$/.test(value);
  }

  function validateFullMemberId (value) {}
  return / ^ [H0-9]\d{10}$/.test(value);
  }

  function checkMemberId() {}
  Get all of the characters that the user has entered
  var value = AFMergeChange (event);

  Allow the land to be developed
  If (! value)
  return;

  If (! event.willCommit) {}
  Event.RC = validatePartialMemberId (value);
  }
  }

• Filled text field, clear the default checkbox

  I've seen a lot of question and scripts on when a box is checked, then the text field copies the value of the checkbox.

  What I'm trying to do is the opposite, i.e. If a text field is empty, the check box by default is checked; But if the text field is filled with what, check the check box disappears. Could someone help with scripts?

  Let's say that the checkbox is named "Check Box1". Enter this code in the custom text box validation event:

  this.getField("Check_Box1").checkThisBox (event.value == 0, "");

• First text field in the page submit when the Enter key is hit. Don't want to send

  Hello
  
  I searched and cannot find this answer I had before...
  
  The text field is not present it always when you press included, just a standard text element.
  
  because it is the first text field in the page... or maybe it was because it is the text field on the page that requires him to 'Submit' page when you press the Enter"" key.
  
  I don't want the Enter key to send the page.
  Was - to add a dummy hidden text field before this text field?

  Bill:

  Add another text element to your page and to the text element 'attributes of HTML Form elements' specify

  style = "" display: none ""

  CITY

• How to add the field or a query to THE field of the process send e-mail Page

  Hello world

  Can you help me please?

  How can I add a field or a query in "to THE" field of the process to send a Page in e-mail?

  I use the 4.1.0.00.32 and oracle 10g Express Application.

  Hi User11131067, please update your grip via profile to something more personal.

  Here's how I did it:

  DECLARE

  l_body CLOB.

  l_to VARCHAR2 (255);

  BEGIN

  l_body: =.

  "Thank you for your interest in the APEX_MAIL package."

  || UTL_TCP. CRLF

  || UTL_TCP. CRLF;

  l_body: = l_body | "Sincerely,". UTL_TCP. CRLF;

  l_body: = l_body | "Dev APEX team | UTL_TCP. CRLF;

  -Get the email addresses of administrators from point of harvest

  WITH the admins

  AS (SELECT person_tbl.email_address_txt,

  ROW_NUMBER () OVER (ORDER BY email_address_txt) rn,

  COUNT (*) NTC)

  OF harvest_admin_tbl, person_tbl

  WHERE harvest_admin_tbl.active_ind = 'Y' - use active Admins only

  -Eliminate Admin Act

  AND harvest_admin_tbl.internal_employee_id <> v_payroll_id

  AND harvest_admin_tbl.internal_employee_id =

  person_tbl.employee_ghrs_id)

  -Concatenate addresses into a single string

  SELECT LTRIM (SYS_CONNECT_BY_PATH (email_address_txt, ",") ",") catvalues

  IN l_to

  Admins

  WHERE rn = NTC

  START WITH rn = 1

  CONNECT BY PRIOR rn = rn - 1;

  apex_mail. Send (p_to => ' [email protected]', - change to your email address)

  P_FROM-online l_to

  p_body-online l_body,

  p_subj => 'APEX_MAIL Package - message in plain text');

  END;

  /

• How can I add a text field for the main menu?

  I have a project with a menu.  He has a title.  I wanted to add an additional track on the menu, what I had done in an earlier draft.  I would have thought he would have intuitively obvious, as highlighting the existing title I and do a copy and paste.  However, I learned that nothing is intuitive with Premiere elements 12.  Can someone tell me how to get a 2nd title on my main menu?  I have done it before, but apparently did not write it and I was faced with that I falsely assumed would take me 30 seconds to accomplish.  Thank you.

  Rick

  Do you really need a second title for the page in the main menu and the selection of scene or you page fixed for your Adobe title in more than one line?

  I wonder

  I wanted to add an additional track on the menu, what I had done in an earlier draft.

  Is it possible that as soon as you use a theme which came with 'subtitle', as the trip/Beach Resort, not all do.

  

  Workaround for the title with more than one line of text can backfire on you. But you can try. Excerpt from my first items 13 on this blog

  0019 first Elements 13 movie Menu title question: multiple lines of text

  
  A first elements 13/13.1 user reports that, if it creates a 3 lines of title text for the main menu of the fake big screen theme in the customization area of Movie Maker project, these 3 lines of text eventually "encoded" in the project of reopening after that that there had been closed.

  We have confirmed this report and extended it to include this problem appears for 13 of Menus other than the fake Widescreen cinema. This issue is not seen in first items 12/12.1 and earlier versions.

  BEFORE REOPENING THE CLOSE SAVE

  Figure 1. Main menu of Spring Flower home with 3 lines of text, as seen before the closure of the Reopen

  AFTER THE REOPENED NARROW SAVE

  
  

  Figure 2. Spring Flower main Menu title initially with 3 lines of text, as seen from the closure of the Reopen

  
  
  The only way found so far to get the final product to have 3 lines of title text for menus in the final product is to customize the theme to the movie Menu in the customization of the Menu movie of the project area, do not save, close the project at this time and can do the burn to.

  
  Many variables were examined to explain this behavior. So far, no answer for why.

  If you are determined to use a particular theme that comes with the title menu and subtitle, look at the text of the Palette layers layers in the editing menu .psd file (.psd Editor could be Photoshop CS or higher).

  Regarding

  on my project last year that was the menu that I liked with 2 text fields, I have also got rid of the "arrow" shortly before the text that was the menu key.  Anyone know how I do that?  I can't figure that out now.

  Could you be more specific. But, for now, consider... If you Play All text, you double-click to open the text of the amendment, the deleted text, click OK. Play All disappeared. Sometimes, in page and removal of text "main menu" scene selection to the navigation button... double click on the button to open the changes to the text, delete text, press ENTER, and then bar spacing, and click OK.

  Please let us know if everything above the target you wanted to know.

  Thank you.

  RTA

• How do I change police inside the text fields of the form

  I went through tutorials on lynda.com and success exceeds my form.

  However I can't understand how a change of default Times Roman in form fields in a different typeface.

  I assigned followed by paragraph styles, object styles, but nothing happens. I also can't change the font color in the text fields.

  Anyone know how to change these attributes?

  You cannot change the default font to a form field in Indesign. You can change the font in Acrobat by changing the form > by selecting the field properties > appearance > fonts

• Fill in the text field of the value of select list using javascript

  Hello
  
  I'm editing a form where a text field is to be filled using an On-Demand application process. The process is called with an OnChange.
  
  Application process:
  

  declare
    l_CCSS_STATUS varchar2(100);
  begin
    select CCSS_STATUS into l_CCSS_STATUS from PATIENT
      where ID = :P11_PATIENT_ID;
    htp.prn(l_CCSS_STATUS);
  EXCEPTION
  WHEN NO_DATA_FOUND THEN
  l_CCSS_STATUS := 'Inactive';
    htp.prn(l_CCSS_STATUS);
  end;

  In the attributes of HTML Form selection list element:
  
  onChange = "javascript:f_getStatus()"; "
  
  It fills a text field (: P11_CCSS_STATUS) when I appreciate is selected in the select list.
  
  
  I am filling a second field (: P11_COPY) with a (share) value for the same table of PATIENTS, but don't really understand how the: P11_CCSS_STATUS field is filled in from the application process.
  
  If I understand the request of the share in the application process, then it is appended to the value CCSS_STATUS and appears in the: P11_CCSS_STATUS text element.
  
  Any help is appreciated.
  
  Thank you
  Matt

  Hello

  visit the similar to the below application process

  declare
    l_CCSS_STATUS varchar2(100);
    l_COPAY varchar2(100)
  begin
  
    select CCSS_STATUS , COPAY into l_CCSS_STATUS , l_COPAY from PATIENT
      where ID = :P11_PATIENT_ID;
    //notice this line.... how the response is send
    htp.prn(l_CCSS_STATUS || ',' || l_COPAY);
  EXCEPTION
  WHEN NO_DATA_FOUND THEN
  l_CCSS_STATUS := 'Inactive';
    htp.prn(l_CCSS_STATUS);
  end;
  

  and javascript call you to something similar to below.

  function myAjaxCall()
  {
     var ajaxRequest = new htmldb_Get( null , &APP_ID. , 'APPLICATION_PROCESS=myAppProcess',0);
     ajaxRequest.add('P11_PATIENT_ID' , $v('P11_PATIENT_ID'))
     //notice the below line.. use of split function
      ajaxResult = ajaxRequest.get().split(',')
     $s( 'P11_CCSS_STATUS' , ajaxResult[0]);
        $s( 'P11_COPAY' , ajaxResult[1]);
  }
  

  Example: http://apex.oracle.com/pls/apex/f?p=12060:110

  Kind regards
  Shijesh

• How to get back to 3 text fields in the footer

  When you open a new document pages, the footer contains three default text fields.  I have a document where I removed somehow 2 3 fields foot leaving only 1. I would like to add the other 2 fields in the footer, but I am unable to find a setting that would let me. My search terms are apparently useless because I can't find any thread on point in a search. Any ideas?

  You can not remove the tripartite fields in a header or a footer. If you visit the view menu: display invisible characters, you will probably discover tabs or spaces that forced each cell to the right in your footer. Just remove these external characteristics and you will restore the three cells to your footer.

• How to set the text field for the credit card number?

  Hi, this seems like it should be a no-brainer in the Properties menu, but what is the best way to add a credit card number to a form?

  I have mine set up like a text field > category format: number > decimal: 0 > Style separator: (by default with the comma, but not what I want, of course)

  and the symbol > No.

  Is there an easy way to create 16 character space to the digits of the credit card?

  Thanks in advance

  Under Format, select special, then arbitrary mask and enter the mask: 9999 9999 9999 9999