InDesign CS 5.5 - links break when the folder is moved

Similar Questions

• Error Msg: "not enough server memory is available to process this command" tries to open the network when the folder shared

  Hello.  I did some of my files of Windows XP Dell system accessible on my home wireless network.  When I try to open the folder (which appears in the network folder) on my Sony Vaio with Windows Vista, I get the error msg that I have stated above in the title of this Post.

  The entire message starts like:

  \\DOUG-DELL1\Denises at the bottom of the folder is not accessible. You could

  are not allowed to use this network resource.  Contact the

  Administrator of this server to find out if you have the permission to access

  "not enough server storage is available to process this command" tries to open the network when the folder shared.

  I have a bitmap and a Jpeg screenshot captures showing the specific error message as well as the objects on my network - is possible I can join to this post?

  This error message is misleading. See article Knowledge Base Microsoft Antivirus software may Cause Event ID 2011 for a likely solution, specifying a value of IRPStackSize 15 on the Windows XP computer. Boulder computer Maven
  Most Microsoft Valuable Professional

• Look for the timestamp when the file is moved

  I want to find when my file is moved from one folder to another folder with in the same drive. Suppose I have a text file and I just cut this file to a folder and paste to another folder, but in the same drive then I see that none of the date changes i.e. Date_created, date_de_modification, Date_Accessed. Could any body tell me how can I identify when the file is moved from one place to the other place.

  Can anyone help please as it is necessary in an emergency.

  Thanks in advance!

  I suggest you do this:

  1. Change the first two lines of the script more far down to suit your needs.
  2. Save the script as Filemonitor.vbs in an appropriate place.
  3. Invoke the script from a command prompt. He will continue to run in the background until you press Ctrl + C.
  4. Add a file in the target folder. Within 10 seconds, you should see the output in the log file.
  5. Add the name of the script to your startup or logon script so that it runs automatically.

  sTargetFolder = "D:\Test."
  sLogfile = "D:\Log.txt".

  Set OFSO = CreateObject ("Scripting.Filesystemobject")
  «sFldr = "" "" & Replace (sTargetFolder, "-","-") & "»
  Set oWMIService = GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\cimv2")
  Set cMonitoredEvents = oWMIService.ExecNotificationQuery _
  ("SELECT * FROM __InstanceCreationEvent WITHIN 10 WHERE" _)
  & "Targetinstance ISA"CIM_DirectoryContainsFile"and"_ ".
  (& ' TargetInstance.GroupComponent ='Win32_Directory.Name = "& sFldr &" ' ")
  Do
  Set oLatestEvent = cMonitoredEvents.NextEvent
  Set oLog = oFSO.OpenTextFile (sLogfile, 8, True)
  oLog.WriteLine Date() & "" & time & "" & Replace (oLatestEvent.TargetInstance.PartComponent, "-","-" "")
  oLog.Close
  Loop

• Get data when the mouse is moved on the line chart

  Hello
  
  I have a line chart drawn. I put showDataTips = "true". And when the mouse is placed on the line, the data that the line appear as the datatip.
  
  Now, I want to display this data in some separate labels or text controls (that I placed in the application). Soomeone can give me a hint how I can do this? I.e. when I move the mouse over the line, the data appears in the label and it changes as the mouse is moved and the modification of the data.
  
  I'd appreciate any help from an expert. Thank you.

  "FlexyBoy" wrote in message
  News:gcnd6p$n1j$1@forums. Macromedia.com...
  > Hello,
  >
  > I have a chart drawn. I put showDataTips = "true". And when
  > the
  > the mouse is placed on the line, the data that the line appear as
  > the
  > datatip.
  >
  > Now, I want to show this data in some separate labels or text controls
  > (that i
  (> placed in the application). Can soomeone give me a tip how I can do
  > This?
  > IE when I move the mouse over the line, the data appears in the label
  > and it
  > change when the pointer is moved and the data is changed.
  >
  > I would appreciate any help from an expert. Thank you.

  This could point you in the right direction

  http://blog.flexmonkeypatches.com/2007/09/03/Flex-charting-LineSeries-mouse-sensitivity/

• This link to another in PDF: links break when folder w/files is compressed

  I'm having a problem and would LOVE to have solved it as soon as possible. I have a folder on my desktop that contains about 10 PDF files. On some PDFs, I created bookmarks. Other PDF files, I've created hyperlinks that will open PDFs with bookmarks. Everything is peachy, all links open PDF files.

  Once I have compress/zip the folder that contains PDF files, I double-click the compressed file, and then double-click the file in the zipped file and open the main PDF file. When I click on any of the hyperlinks, nothing DON'T get PAST

  If I extracted the folder containing the PDF files from the compressed and then open the main PDF file with all the links, bookmarks open without problem files.

  Why did I lose hyperlinks while trying to open PDF files without extracting the folder?

  Because when you double-click on a file in a compressed folder is not

  Unpack the whole thing, it only extracts the file you clicked on to a

  temporary folder somewhere on the computer, and then opens it. If the links

  for the other files are no longer valid.

  If you want this to work you must unpack the complete zip file, no parts of

  it.

  Monday, May 11, 2015, at 19:55, dawne95759398 [email protected]>

• A pdf file exported from InDesign, but displays various error messages when the same file is downloaded on the same laptop from the company's Web site

  Hello

  I'm having a problem with a pdf file created for my business. It exports without problems and displays correctly on my computer, but once it is transferred to the Web site and you download from here, pages randomly displayed not correctly, images and pieces of text go missing and different "internal error" messages pop up, such as:
  

  "An internal error has occurred."

  "There is an error on this page. Acrobat may not display the page correctly. Please contact the person who created the pdf document to correct the problem.

  "Failed to retrieve the embedded police"LICYDR + GaramondMT". Some characters may not display or print correctly.
  "Insufficient for an image.

  And when I close the pdf file it asks if I want to save even if I did not bring any changes to the document. It seems that everyone has problems with pages and receive different error messages. It is exported using the smallest file size preset in InDesign. Any idea what could be the cause? Any help would be greatly appreciated!
  

  
  

  Thank you

  Sarah
  

  One thing to check is if BINARY is used in the FTP client. If a client FTP ASCII is used, it may corrupt PDF files.

  Here's another thing to check yourself for you. Find the size in bytes of your original PDF. Now, look at the size of the uploaded file in bytes. Are they the same? If this is not the case, ask your colleague the size in bytes of the PDF file on the server. Is this the same as the original, or bad file?

• Save the glyph of brand changes size when the document is moved to another folder in InDesign 5.5.

  I have a file that has a register mark which is superior. It is superior by the glyph and not by a setting in InDesign. If I close the document and then move the document to a different folder via the file system, when I open the file up and discovers the mark from the register, it is enlarged. If I close it and bring it back to the original folder, it's new to be superior.

  I use InDesign 5.5 on a mac under OS 10.6.8

  Help!

  If there is a folder named "Document Fonts" in the folder where you place the InDesign file, it uses the fonts in this folder. If there is in this folder of fonts that have the same name as the fonts installed in your operating system, this can cause conflicts of fonts.

  If you go to mode-> display-> Normal Mode, you see pink highlighting? This means that the font that you use is not present, and InDesign uses a flaw that is installed by default with InDesign, such as Minion Pro and Myriad Pro, instead of the missing font intended for you.

• change the appearance of the link account when the Member is signed in

  Hello

  I am creating a site of electronic commerce using BC for the first time. I have configured the area secure, users access by logging in after clicking on the top right of the my account link dandeliongiftshop.busiensscatalyst.com

  Once logged in the user box how can I change the my account link that when clicked on it is no longer necessary to the user to the login page, but instead leads them to their member/index.htm page?

  Thanks in advance

  Phill

  Take a look at your template main downstairs, I added the snippet for you. Edit this link with the link you want to use when the user logs - http://screencast.com/t/Oab7OtOuMRB

• T430 video flashes when the laptop is moved

  I have a new laptop with Win 7 32 bit T430.

  Since the beginning, I have questions while watching videos on VLC media player or Winamp. The video flickers and gets stuck for a couple of second every time I have to move the laptop on and push.

  I guess it's a hardware problem.

  Hi Fufixa,

  Welcome to the Community Forums of Lenovo!

  I'm really sorry to learn that when you watch videos on your laptop Lenovo T430, it sparkles and get stuck for a few seconds every time that you try to move or to push.

  I would like to inform you that your Lenovo T430 has a technology called Active Protection System. When the protection system detects any movement, he stops to your hard drive and the system seems to be temporarily out of order. The hard drive is less vulnerable to damage when it is not in operation.

  You can manually disable Thinkvantage Active Protection System.Uncheck the "enable Active Protection System".

• Error file compressed (zipped) folder is invalid when the folder name and the location is OK

  I have a folder zipped on my computer which has 2.84 MB of data in it.  I can access the folder and check the properties of it using windows Explorer.  But when I try to open the file, I get the message "windows cannot open the folder.  "The compressed (zipped) folder [the name of the location and file names] is not valid.  Why this file is not valid.  The name and the location is OK?  Why I can't access this folder?  I tried the extrace all files option and tap of properties has the file open by windows Explorer (which opens at all other files zipped, I downloaded).

  Hi Bill,

  Thanks for choosing Windows Vista Forums.

  Have you tried re - download the file and open it?

  The file may not have been packed correctly so, make sure that you re - compress the file and open.

  Let us know how it works.

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to enter an image on a screen when the camera is moving

  Hello

  I know it's a basic question, but I fight here...

  I have a show of studio based with a monitor on set showing green with the idea that I touch still images in there... that would be good, BUT...

  There are some photos where the camera comes out and / or moving during the shooting... usefully presenters are sometimes before the corners when the camera moves

  I guess I use the features of follow-up (AE or PP?) but am faced with scaling... the lower is always the end of the shot that begins with the presenters at the back of the studio walk forward... How can I get again that I am FORCED to 'reduce' at the same pace it as the camera (it's not that smooth traction) fate...

  Any help / tutorials greatly appreciated...

  Thank you

  Alan

  

  I would investigate camera tracking in AFX

• Explosion of file size when the VM between moving/copying data store

  I just got my first setting dedicated the SAN unit in my ESXi infrastructure.

  I have set up and now my ESXi server got this new available data store.

  Initially, virtual machines when running on the local HDD SAS.

  I'm trying to move virtual machines between the 'old' DS to the new using the DS browser.

  When copy/moving of the unit of SAN iSCSI VMs to my HARD drive, I'm done with a HUGE vmdk file.

  Let's say that my original files are approximately 35 GB, when the process of copy/move this virtual machine to the no new DS, I get 250GB which is the size configured my virtual HARD disk...

  I'm I missing something here (obviously)?

  Any help/info would be greatly appreciated.

  Concerning

  Take a look at http://communities.vmware.com/message/1499444

  André

• Sound in a movie clip malfunctions when the playhead is moved backward

  Summary of the problem:

  A his (flow) placed inside a clip that is in another video clip begins to play continuously when I use control of the game to jump on the main timeline.

  Details:

  I am using Flash CS3, but the same problem occurs with CS6. I have spent quite a bit of time to research/search for the number but has not found a solution. To illustrate the problem, I reduced the flash animation to a very simple structure.

  A the main timeline:

  • The first image has a clip (Game MC) and a stop action.
  • Following the first image, there are several frameworks, for the most part empty except for the text.
  • The last image has a stop action.
    

  On the timeline of the Game MC :

  • There is that one frame. In this image, there is a clip (Map MC) and the stop action.

  On the chronology of the MC card :

  • It starts with 3 images of virgins and a stop action.
  • Starting with 4 frame, a his (.wav format) is placed and is set to be 'stream '.
  • At the end of this period, there is a stop action.

  Flash CS3, I press Ctrl + Enter to test the movie. The film stops on frame 1 of the main timeline with the card not showing, no sound, as expected. Now, I use "." to move the head piece forward one frame at a time. No problem. I see the images after the first image. Still no sound, as expected. So far so good.

  The problem starts when I use ',' to move the playhead to the rear, the sound in the MC card begins to play, no matter where the head piece is, even when the game MC (of there the map MC) is not on the scene. Worse, each press of the ',' will trigger another start of the overlay sound even with the previous. And the sound would continue looping until I close the SWF.

  However, the problem will occur if I place the MC card directly on the main timeline. It only happens when it is inside another video clip (game MC).

  I need to solve this problem, because the full version of the game of flash cards must be placed in a HTML page with a javascript based, playback control that allows the Viewer to jump around the chronology of swf.

  The fla file is: https://docs.google.com/file/d/0B_5mgotjr4l5RDZaOGxFeFFWN1U/edit?pli=1

  I'm doing something wrong? Is this a bug in Flash? Any ideas will be greatly appreciated.

  Keith

  It is a bug in flash.

  to remedy this, use the sound class to play your sound:

  var s:Sound1 = new Sound1();  where Sound1 is classname you assign to your sound.

  s.Play ();

• Help! JavaScript works not when the object is moved from one page to the other!

  Hi all:

  I am new to Adobe Livecycle Designer (version 8.0). I created an interactive pdf form of 3 pages with many objects (text fields, radio buttons, drop-down lists, etc.), our company wants to quickly start to use.

  I'm having trouble with some of my Javascript does not not with some of my items on page 2 of the form. Specifically, there is a drop down menu to "Country" on page 2 of my form. When the user selects, for example, 'United States' in the list, I have the Javascript code that is supposed to change the 'currency' list drop-down to "Dollars" rawValue accordingly (on the change event).

  I think that my Javascript syntax is correct, but I am not sure. Here's my simple Javascript associated with the "Country" drop-down list (Note: rawValue 80 = 'United States' and 105 rawValue = "US $"):

  -

  ---

  Form1. Page1.cmbContactInfoCountry::change :-(JavaScript, client).

  ---

  If (this.rawValue == 80) {}

  cmbCurrency.rawValue = 105;

  }

  It sounds pretty simple and it WORKS when my "Country" drop-down list is moved to page 1 of the form, but it WON'T WORK when I move the combo box "Country" return to page 2 of the form (i.e. where it belongs).

  Anyone has suggestions or solutions? I spent probably 6-8 hours of racking my brain trying to figure out why it works when on a single page, but it does not work when to move to another page. I guess I can have corrupted something OR that I not address fully the proper name of the object?

  Help, please!

  Frustrated and helpless, near Chicago.

  Taylor T

  Yes, it's a quirk of... in the drop-down lists when you select an item in the DOF it is not committed until you exit the field, unless you do the following:

  If (this.boundItem (xfa.event.newText) == 1) {}

  cmbCurrency.rawValue = 1;

  }

  ElseIf (this.boundItem (xfa.event.newText) == 2) {}

  cmbCurrency.rawValue = 2;

  }

  The xfa.resolveNode stuff was not necessary that both objects are of the same subform, and as such can 'see' each other.

  Think like a folder structure subforms - elements can see what is in their own folder but will say where to find things in other folders. If cmbCountry was subform1 and cmbCurrency was so in subform2 that rawValue above lines would look like:

  subform2.cmbCurrency.RawValue = 1;

  It's a good idea to name all your objects, subforms, etc. it is to work with script is much easier - so you won't have to deal with things like these pieces of xfa.resolveNode you had before (as well). He ones because you have more than one subform called "subform", the number of hooks is the Instance number (when you have several of the same object) if the program has to differentiate between the various "subform".

  The number of instance come in handy, but for things like the rows of the table and so on when you need to make calculations.

• Link graphics in the folder that is located in the root folder of Dreamweaver

  I have a main root folder for a Web of DW site. In this folder, I have folders for a slide show. For the buttons in the main page to link to different slideshows, I have to put a version of mainpage in each slide show file. So, essentially I am making copies of the html of the main index, renaming them and placing them in folders * in * the root folder.

  My problem is that all the graphical links are broken. I get this and it makes total sense, but I can't put the html files of link outside these folders on the other that they will not display the individual slide shows, I want to make a link to the main page.

  My question is: Y at - it a way to keep active links of in a folder in the root folder? or I have to copy the used graphics and put them in each slide show file.

  Any thoughts are appreciated.

  Thank you, sharon

  Hello

  Remember that your code must also point to the pertinent files so that your script to find.

  for example - where you have SWFObject ("illustrations/viewer.swf"...)

  Make sure it points to the viewer.swf file. This applies to all of your script code, if you have a file in the main folder, you're good, but if you move it to a subfolder, you need to change this for - ("'... / illustrations/viewer.swf '... more code), in order to find the code.

  HTH