backup failing 0x800700AA windows vista

Similar Questions

• How to make a backup of my Windows Vista?

  Hello.

  Windows Vista has been installed on my Toshiba laptop when I bought it.

  How to make a backup of my Windows Vista and I need to?

  Can I do a backup on a CD, or how?

  I think I have to need if I get a virus and you need to remove and install from the beginning.

  Thanks by

  Hello

  I think that it s a good idea to make a backup on your laptop.

  You have created the Toshiba recovery disks? When you bought a Toshiba laptop, you must create these disks. If you have a virus or something else with these discs, you can get the factory settings on your laptop.

  You can create discs with the Toshiba recovery disc creator and if you didn t again, you get the following message:

  > Important INFORMATION
  >
  > your system is equipped with a hard drive recovery system. If you need to repair
  > your computer in the restaurant to original factory State, you can do it directly
  > drive hard (press F8 when you start your computer, choose "Repair your computer"
  (> and follow the instructions in the menu) or create a media drive bootable recovery for this purpose.
  >
  > Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the
  > Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer
  > is seriously damaged

  So create one and if you need, you can get factory settings with Windows, drivers and tools in minutes.

  If you want to make a backup of your laptop with all the software that was installed by you, you must use programs such as Acronis True Image backup.

  Bye!

• I can't backup DVD for Windows Vista operating system due to the error of 0x8007001B

  I can't finish a DVD upward on my Windows Vista operating system.  This is due to an 0x8007001B error code.  I was unable to complete the fix to services.msu

  Hi mine,

  This isn't a question of MSE - there is a problem with Vista or your computer or your software backup or your DVD player or its drivers or something else. We are not the right people to answer your question and give you the best possible options and solutions - you have to talk to the experts.

  Please repost at: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system?page=1&tab=all&tm=1304884961900 where specialists who understand and focus to help with these issues will be more than happy to help you.

  Although not my area of expertise (and you're welcome to ignore it and just after to the other forum), I did do research in any case and believe that the problem involves the corruption on your hard drive (although I could certainly be wrong - it is more likely to be the case if the full error message includes "drive cannot find sector requested" but you don't get the full error message, so I don't know). To try to fix it, if that is the problem, follow these steps:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  While in the command prompt, type chkdsk /f /r and enter and let it run. They tried to set itself to run at the next reboot. Answer Yes and restart to run the program. It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  If this does not work, test better clean your hard drive. To test your hard drive, check the manufacturer and try to diagnosis HD (http://www.carrona.org/hddiag.html) or this test: hard drive diagnostics tools and utilities (storage) - Corp of TACKtech (http://www.tacktech.com/display.cfm?ttid=287). If it passes the tests, there's probably nothing wrong with it and you must do to the other support forum. If it fails, which include in your post on the other forum and let them advise you how to proceed.

  I hope that the above solves the problem. If this isn't the case, I am confident, they can help you in the other forum, because that's what they specialize in. It would help if you posted the message Word for Word that is accurate and complete, including all codes. In addition, it would help them if you explain the difficulty you mention services involving (a link to the site where you found the solution or at least what exactly you did and what has happened or not happened when you tried). And if you've tried my suggestions above, include the results in your message (so they don't ask you to do it again and will be able to exclude).

  Good luck and best wishes!

• Update failed for Windows Vista failed KB975517

  I get the same message update failed

  Hello

  In Control Panel - Windows Updates - right click top and HIDE.

  Then download and install it here:

  Update security for Windows Vista (KB975517)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=29842c0c-8930-4B5F-83c6-1a718974b63f&displaylang=en

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ----------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Delete the automatic backup files in Windows Vista Home Edition!

  Hello

  I bought a new HP Pavilion pc six months back... I have the disk hard of 320 GB (hitachi)... what I have copy on my hard drive, everything becomes backup without my knowledge...
  my space on the hard disk is dripping... for example: I have a lot of movies on my hard drive for about 50 GB, but I lost about 100 GB that means backup took place...
  now I want to delete these backup files to free up my disc drive... pls help... I don't know where the backup files are get stored... pls help...
  regarding...
  Karthikeyan devalla.

  Karthikeyan Devalla,
  Here are the instructions to remove some of the restore points using disk cleanup.  Your system is configured to record everything automatically on your computer at periodic points so if you need to restore your system files will be there.  But sometimes, you get more restore points that you want or need and he can eat a lot of disk space.  Here's how to control this.

  You can use Disk Cleanup to remove points of restoration and the free space on the hard disk on your computer.

  Disk removes the cleanup all but the last restore point on your computer. In some editions of Windows Vista, restore points can include previous versions of files. Previous versions are also deleted.
   
  1. open Disk Cleanup by clicking the Start button, tap all programs, accessories, click System Tools, and then click Disk Cleanup.
   
  2. in the Disk Cleanup Options dialog box, click files from all users on this computer.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  3. If prompted, select the drive you want to clean, and then click OK.
   
  4. click the other Options tab.
   
  5. under System Restore and shadow copies, click Clean up, and then, in the confirmation dialog box, click on delete.
   
  6. If you want to continue using disk cleanup for other drives on your computer, click the Disk Cleanup tab. To quit Disk Cleanup, click Cancel.
   
  Let us know if this was helpful, or if you need more information.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Restore the backup files. Windows Vista Expert needed!

  Help!  Recently, a virus wiped out my operating system (Windows Vista).  C drive my PC had literally nothing about it.  Then I got a new VISTA OS installed by a repair shop.  I tried to restore my previous configuration from the backup I had on an external drive, using the Vista Backup & Restore utility.  This "worked" except that he restored the backup files in a separate location on the C drive.  Using the windows Explorer I see all those files that have been restored in a folder named "Thom".

  However the new Vista installation has the user name "Thomas" where a configuration complete, (Documents, Favorites, desktop, etc.), was created.  When I connect, it's the config I see (new office, new files and folders for this new user, 'Thomas'.  I want to use the configuration, (files, folders, office computer), under the former name "Thom", not this new one, "Thomas."

  I'm afraid to just delete the files under Thomas I'm afraid I'm going to destroy my access to Windows in general.  Currently, I show only a user account in the control panel.  I don't have the 'Thom' user in the folder of the user within the new configuration.  How to delete files and folders under Thomas and use files and folders in the folder named Thom that is located on drive C?

  All restoring the backup files are there, they show just a folder on drive C, titled "Thom".  When I connect to my pc it takes me to your desktop created by the new facility.  I need ALL the files in the backup (office, e-mail, files & folders), not the Setup program created by the installation of the new Vista.  I want to be able to connect to windows and have it use the backup files, which are located in this folder named "Thom" which show on the C drive.

  Can I simply combine or merge or copy the files in the folder 'Thom', I want to use in the files of the same name, (contacts, documents, Favorites, desktop), which are under the name of "Thomas"?  Can I remove folders under the user 'Thomas' and all it's files and records and hope that windows then takes me in the files that I want to use?

  I use my laptop, (HP Pavilion, 64-bit), for business and I'm dead in the water until I can access my old configuration.  I am on day 5 of this disaster and I am desperate, please help!

  Hello Reggie999,

  Thanks for the return of the response.  You can move the files/folders in the 'Thom' folder in your new user account 'Thomas '.   Or another option would be to create a new user account and call it what you want, then move the folder in this user account.

  If you create a new user account and move your files/folders to this account, it would be nice to delete the user account 'Thomas '.  Just make sure that you have all of the files in the profile that you have recently created/added.

  New profile:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

• 'Incorrect function' error with my backup (I have Windows Vista)

  I have a problem filling my back up.  Even if it is scheduled every week the last completed upward was in 2008.  When I did this time it gave me the message:
  Incorrect function (0 x 80070001)

  What does that mean?
  Thank you!

  Hello
   
  1. you are using ' backup and restore the Center "or any other program to save the files?
  2. who is the edition of Windows Vista installed on the computer?
   
  This problem occurs when you click on a complete PC Backup in the backup Center dialog box and restore and then you click on create a backup now.
   
  To resolve this issue, follow these steps:
  1. start disk management. To do this, click Start, type diskmgmt.msc in the search box, and then click diskmgmt.msc in the list programs.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2 right-click the primary partition that you want to enable, and then click Mark Partition as Active.
  Exit disk management.
  3. restart the computer by using the Windows Vista DVD. Press any key to start the computer using DVD.
  4 set your preferred language and then click Next.
  Note: In most cases, the repair process starts automatically, and the System Recovery Options menu is not displayed.
  5. click on repair your computer.
  6. in the System Recovery Options dialog box, click the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click Startup Repair to start the repair process.
  8. when the repair process is complete, click Finish.
  9 restart the computer by using the hard disk.
  10. connect to the computer as an administrator and then try to perform the backup operation.
   
  For more information, see this link: http://support.microsoft.com/kb/950167
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The backup failed. "Windows backup failed while determining the location of the libraries of one of the users included in the backup"

  Original title: Windows backup has failed

  Windows backup does not have everything in determining the location of the libraries of one of the users included in the backup. Details: The device is not ready.

  What I found was causing this problem for me has been my dongle wireless Optus.

  It appears in my computer as a CD player.
  Out the wireless internet key and the backup finally started running.

• In my list of windows update, I have 2 entries that say FAILED to "Windows Vista Service Pack 2 for x 64 systems (KB948465).

  I don't have any other try to install SP2 I can find in my history of update.  But "View basic information about your computer" says my edition of windows Service Pack 2.

  I went to the download section to download the SP2, and I clicked on RUN.  As far as I can tell, after the download is finished, he did nothing.

  ... "See basic information about your computer" says my edition of windows Service Pack 2.

  So don't worry about these "stranded" lists

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update the Configuration failed on Windows Vista when the computer was closed prematurely at sea

  My son turned off the computer before the update of configuration was complete.  It uses a Compaq Vista premium desktop computer.  The operating system will not load (it is stuck in a loop trying to reconfigure the old settings before the update).  We have tried to start in Mode safe mode and do a system restore.  The first available date is November 15, when the update occurred.  System Restore got the point to finalize and then jammed (lasted at least 4 hours).   Any suggestions other than a complete system to recharge?

  Hi DRoggeman,

  Welcome to Microsoft Answers Community Forums.

  I suggest you to do the Startup Repair to fix boot of startup problem and uninstall all updates you have installed.

  Reinstall or install updates for your computer by going to http://windowsupdate.microsoft.com

  To perform the Startup Repair, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  1. Insert the installation disc.

  2. restart your computer.

  Click the Start button, click the arrow next to the lock button, and then click restart.

  3. If you are prompted, press any key to start Windows from the installation disc.

  Note

  If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  4. choose your language settings, and then click Next.

  5. click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  For more information, please see the links below,

  ·          http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem Fixed a problem starting to boot.

  ·          http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions Frequently asked questions.

  Hope this information helps you.

  Kind regards

  Arona - Microsoft technical support engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update failed error Windows Vista 80070057

  Hi .......

  The error code that is coming is 80070057.  I ran the fix with no changes, I ran scannow sfc and when he got to the 30% full it failed and no end not (method 2).  I ran the disk check, and it gave rise to no error. I followed the suggestions with msconfig.exe without success.  I went as a result of further discussions and disabled winHTTP Web Proxy Auto discovery service and which also does not correct the problem. The oddest thing is that I went through the Setup log and a very small number of updates is completed successfully, but by far the largest part of all updates failed.

  Any suggestions are appreciated.

  Thank you!

  Hello!

  try to check that this related thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-80070057-when-trying-to-update/31721b5c-4E5B-495B-A23C-dbd213488149
  Thank you
  Maria,

• Ping 127.0.0.1 fails on Windows Vista

  On my Packard Bell EasyNote AJ300 with Vista Home Basic SP2 Italian my network connection is always in a State of "local." Same problem wireless and wired connections. I have disabled TCP/IPv6, 6to4 adapters, isatap interfaces and teredo tunnels, I used the two auto fix tools MS (50199 and 50203), I reinstalled the wlan with the more recent drivers, I tried with wlan card usb and its manager of connections I checked for viruses or malware. I've disabled IP Helper and checked the client DHCP is running. I disabled the firewall and antivirus client.

  Same problem with the connection of network in safe mode

  It's my ipconfig/all:

  Configurazione IP di Windows

  Nome... host: casa
  Suffisso DNS primario...:
  Type nodo...: Ibrido
  Abilitato... IP routing. : No.
  Proxy WINS abilitato...: No.

  Outdo the LAN scheda rete Wireless:

  Suffisso DNS by outdo specifico:
  ... Description: Atheros AR5007EG Wireless Network adapt
  Address physical...: 00-15-AF-7D-29-AD
  DHCP abilitato...: If
  Configurazione automatica abilitata: If
  Automatica configurazione address IPv4: 169.254.144.122 (Preferenziale)
  ... Subnet mask: 255.255.0.0.
  Gateway predefinito.... :
  Known NetBIOS TCP/IP: started

  Hi Enzod,

  Step 1:

  First of all I suggest you cancel any changes that you have made your computer.

  Step 2:

  You try to perform a system restore to go back to the properly working parameters and verify if you are able to go online.

  For more information, see this link below.

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Step 3:

  If the problem persists then, I suggest you to uninstall and reinstall the NIC drivers and see if the problem is resolved.

  You must be logged on as administrator to perform these steps.

  a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  (b) in Device Manager, look for the device and then double-click the device name.
  c. click on the driver tab, then click on uninstall the driver and follow the instructions.

  Reference:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note: You must visit the manufacturer's Web site to download the latest NIC drivers.

  Reference: http://www.Atheros.com/pt/index.html

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• My backup system to stop working on my computer: "backup failed from Windows while trying to read from the shadow copy on one of the volumes to back up.

  My back by abandoning work on my computer, it worked for the last 3 years and all of a sudden I have an error message "failure of the Windows backup while trying to read from the shadow copy on one of the volumes to back up. Please check in the case where the relevant error logs. "How can I fix this so I can get a full backup?

  original title: shadow copy error
  Hello
   

  See the methods listed in the article mentioned below and check with the question.

   
  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  http://support.Microsoft.com/kb/973455
   

  I hope this helps!

• On Windows Vista 32 bit full backup fails with error 0x8007045d i/o device.

  Original title: 32 bit back up fails i/o device error

  I'm doing a full backup, because I just perchased Office 2010. I am trying to download on my cd player, E: got as far the 3rd cd and it fails

  i/o device error (0x8007045d)

  Help with this error code?

  Hello
   
   
  Try the methods listed in the section below and check if that helps resolve the issue.
   
  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
  http://support.Microsoft.com/kb/952272
   
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista backup: How to restore a backup

  My HP laptop running Windows Vista Home Edition died yesterday. I did fortunately backup using Vista backup to my external storage device.

  I just got my Dell under Windows 7 Home Premium laptop. How can I transfer my backup files in Windows Vista on my device to external storage to my new laptop?

  original title: Windows Vista backup

  Hi BaylorPup,

  Follow the steps in this document to restore files from a backup.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.