InDesign CS5.5 cannot select objects, they do not show more in the layers panel

Similar Questions

• InDesign CS5 do not have access to the layers panel

  I have InDesign CS5, version 7.0.4. on Windows 7 and I noticed that the layers Panel has disappeared. I tried, by choosing a different workspace; in the window menu and choosing diapers; F7 pressed; opens another document where I knew I had layers. I can't do anything to display the layers panel. I checked with my Adobe Application Manager and it says that my updates are all up to date. I don't use very often layers in InDesign, so I don't know when this happened. I have the feeling that an update may have changed things. Since the installation of the update (it was some time ago) and when I reduce ID I can always see two windows, even if I only opened a. When you hover over the minimized icon the title of the second window is "HWNDBasedPanelView UID:600". Probably has nothing to do with the layers panel endangered, but I thought that I would have mentioned. Any suggestions?

  This is a typical corrupt preferences. Try:

  Garbage, replace, reset or restore the application preferences: http://forums.adobe.com/thread/526990

• Objects not no projection in the layers panel

  Hello

  I use Indesign CS4 on Mac 10.6.8. I have a problem with my layer panel-> it does not show a disclosure triangle, so I can't expand a layer to show its objects. The objects are certainly on the layer - if I click on "Select all the objects on the layer" all objects are selected in fact so, technically, they are on the layer-> I can't see the fall down in the layers panel.

  I tried the simple things like expanding the Audit Committee for lack of fonts (I've read that there are often problems w / Verdana in the layers panel...) to restore settings preference... nothing worked and I could not find an entry unique forum on this issue...

  The file I use is a plug-in to a photo book, however, the layers Panel does not work correctly even if I create a new document in full...

  In Illustrator, it works perfectly, showing all the objects and paths on a layer...

  Thanks a lot for your comments and help!

  Laura

  

  When you select an object it must be a square of light color on the right edge of the layer name. Drag on the new layer. Or you can cut and paste in place on the new layer (to paste remembers layers off).

• InDesign CS5.5 cannot select the tool move

  I have InDesign CS5.5, installed on a desktop computer (Windows 7 Home) and it works fine. I installed it on a second desktop computer (Windows 7 Professional). It seemed to install and update fine. However, if I create a new document and drag a rectangle I can't access the move tool to move and I can not change the size and position using the boxes below the menu bar.

  All of the suggestions.

  Tony

  See the signs and tools InDesign respond not to the clicks of the mouse (Windows 7/Vista)

• How to select several objects on the layers panel in Illustrator CC

  I have a work of guge and I need to select a small group (about 10-100) of objects from 4000 bunk and then group objects ' em/split-to-layers for ease of use (this is an infographic of the human body for medical institute)

  There IS NO way by selecting in the Web because they are overlapping and sometimes not visible at all.

  in CS5 there was a function to select several objects to the icon selection Alt + click - move on the right in the Layers panel.

  Now the mode duplication towers - on when I try to run it.

  Then.

  Ho I select several object without having to click through thousands of them? (I need to drag-select)

  IM totally frustrated.
  

  As long there is no deliberately locked object, you can do the following:

  Drag on the lock column in the layer panel

  Object > unlock all (there is a shortcut for this)

  -> unlocked objects are selected

• Found the names not allowed on my contacts Hotmail list and cannot remove them (they do NOT appear when I look at 'Contacts')

  Found not authorized names on my Hotmail Contact list and cannot remove them (they do NOT appear when I look at 'Contacts'), but are present if I send a new email by clicking on the button 'A' and selecting 'all '. Any suggestions on how to remove the unauthorized names?

  Submit all Hotmail queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/

• The term 'Select-Object-property' is not recognized as a cmdlet, function, script file or executable program. Check the spelling of the name, or if a path has been included, make sure the path is correct, and then try again.

  I have a fairly new version of PowerCLI (5,5 Rel 1) 5.5 being ESXi and vCenter.

  I also checked that automation. Core is installed:

  PowerCLI C:\Windows\system32 > Get-PSSnapin VMware.VimAutomation.Core

  Name: VMware.VimAutomation.Core

  PSVersion: 2.0

  Description: This Windows PowerShell snap-in contains the Windows PowerShell cmdlet

  TS of vSphere management.

  but after connecting to vCenter, I get error trying to run:

  PowerCLI C:\Windows\system32 > $Results = ForEach ($DRSRule to $DRSRules)

  > > {}

  > > «|» Select-Object-Property @{N = 'Cluster'; E = {(Id-vue-Get $DRSRule.Clust)}

  amplifier. {{ID). name}}.

  > > @{N = "Name"; {E = {$DRSRule.Name}}.

  > > @{N = "enabled"; {E = {$DRSRule.Enabled}}.

  > > @{N = 'Type of DRS'; {E = {$DRSRule.KeepTogether}}.

  > > @{N = "MV"; E = {$VMIds = $DRSRule.VMIds - split ","}

  > > $VMs = ForEach ($VMId to $VMIds)

  > > {}

  > > (Get-View-Id $VMId). Name

  {> >}

  {{> > $VMs - join ","}}

  {> >}

  > >

  The term 'Select-Object-property' is not recognized as a cmdlet, fu

  function, script file or executable program. Check the spelling of the name, or if

  a path was included, make sure the path is correct and try again.

  On line: 3 char: 32

  +     "" | Select-Object-Property < < < < @{N = 'Cluster'; E = {(Get-view-Id $DRSRule

  . {{Cluster.Id). name}}.

  + CategoryInfo: ObjectNotFound: (Select-Object-property string :)

  [], CommandNotFoundException

  + FullyQualifiedErrorId: CommandNotFoundException

  PowerCLI C:\Windows\system32 > Add-PSSnapin VMware.VimAutomation.Core

  Is ' Select-Object-Property not installed?  If not, where I get it, please?

  see you soon

  KC

  Note, I received this Dean here code: PowerCLI: extraction rules DRS; Deans blog

  There should be a space between the - Property parameter and Select-Object

• When I connect my computer to the Netgear router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access.

  I have both a laptop and a desktop computer and use a modem wired high-speed internet.  I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...

  Original title: router does not work...

  Hello

  Welcome to the Microsoft community.

  I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.

  You must contact the ISP to verify if they can help you with this question.

  In addition you can keep these items handy, it might help you.

  Set up a wireless router

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router

  Install or remove a modem

  http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem

  Change modem settings

  http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings

  It will be useful.

  If you need help with Windows, let know us and we will be happy to help you.

• Unable to import photos: they are not even displayed in the import menu. When I click on the import button, LR6.3 not responding

  From fews days, I have a lot af problems in importing the photos. with LR6.3

  they are not even displayed in the import menu. When I click on the import button, LR6.3 unresponsive. And I have to force to leave LR!

  A few ideas on how to solve this problem?

  Thank you

  Hi Brigittet,

  I suggest you to please upgrade to the latest version 6.5 of Lightroom: keeping up-to-date for Lightroom

  Also try:

  • Go to Lightroom > Preferences.
  • Also please go to preferences > Performance tab and uncheck the box "use graphics processor.
  • Restart Lightroom and see if it works.

  Concerning

  Tanuj

• Found and lost in the layers of the CC PS 2015 can be selected in the document, not only in the layers panel?

  Seriously, I don't know if it's a FigNewton of my imagination or a real change in the Photoshop workspace, but when I started using PS CC 2015, a few months ago, I found myself moving layers on the screen simply by clicking on it in the document and moving them, instead going to the layers panel , by choosing the correct layer, then return to the document and move the layer or change. Is this a real change or I dream? Especially, if it's an option, I can't do more. He stopped. How do I resurrect it?

  Automatic selection / auto-move has been there for several versions. Check your settings of the tool at the top when you use the move tool.

  Mylenium

• Until a few days ago I was able to print a PDF from Acrobat Reader ms in Windows 7.  Now I get "the document could not be printed."  The next panel says "there are no pages selected to print," even if all the pages have been selected.  Thoughts?

  Until a few days ago I was able to print a PDF from Acrobat Reader ms in Windows 7.  Now I get "the document could not be printed."  The next panel says "there are no pages selected to print," even if all the pages have been selected.  I've uninstalled Reader and reinstalled, but the problem remains.  I also tried to repair the installation and that doesn't work anymore.

  Thanks for the tip.  It turned out that kind Reader has been commissioning in protected mode.  I changed the setting and it prints now as before.

  Thank you

• I installed camera raw which supports photoshop cs5 several times, but why I'm not able to find the raw camera filter menu Filter?

  I installed camera raw which supports photoshop cs5 several times, but why I'm not able to find the raw camera filter menu Filter

  Hi sharathm,

  Greetings!

  Camera filter gross was not with photoshop CS5.

  You have installed the camera raw plugin and not filter raw from the camera.

  You can open files in camera raw using of bridge or just right click on the image and choose open in camera raw.

  Check out this video here: https://www.youtube.com/watch?v=UKJuUC9_XUg

  Concerning

  Jitendra

• How to copy the name of the track in the layers panel to the center of the path object / in my file HAVE?  Is there a native function or some kinds of scripts that could be done?

  For example, I have a map of the United States.  Each State is a path and was named in the layers panel.  I want now to generate the name of the State in the layers panel is automatically center the text within each State/access path.  Each file will also be saved as an svg once completed.  I want to do this so that it saves me time from having to manually type the name of each State in the State.

  This should help you get started.

  will do most of the work.

  I would just be manually tweaking the position of those who do not look correct.

  function Qwertyfly_name_to_text(){
      var doc = app.activeDocument;
      var sel = doc.selection;
      for(var i=0; i		   

• Cannot see the layers in the layers panel

  I don't see all the layers in the layers panel, it happens after working for awhile, I tried:

  -Resetting the workspace

  -Switch to a new workspace and then switching back.

  

  I contacted Adobe support and they helped me solve the problem.

  -Close Illustrator

  -Come on in your local/library/Preferences (if you don t know how, I can tell you)

  -Rename the folder 'Adobe Illustrator 18 settings' to something else

  -Open Illustrator. Now it works!

• Illustrator 2015.3 - cannot select objects in the layers palette

  After having upgraded to 2015.3 this morning, I can not select the layers to reorganize in the layers palette. The file is one I created before the update - but even a newly created file has this same problem.

  He puts the light color to the right of the object in the layers palette, but refused to move the object upward or down in the stack.

  Has anyone else had this problem and solved?

  Mac Yosemite 10.10.5.

  Thank you

  Beth

  Thanks Mike - I found my answer: decouple, decouple, dissociate. I who appears when objects are grouped a few times it can not be moved until it was separated.