After the installation of KB2729450, the icon "updates are ready... "appears again and wants to reinstall again and again...

Similar Questions

• After the recent update has lost all contacts and notes

  I tried to run a backup but its showing only the most recent. How to search past backups?

  Hello

  you try to store from a previous backup using iTunes?

  If so, you should see a window like in the photo attached to this post. Here you can choose from the available backups.

  See this post:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

  

• After the recent update, I have both English and a certain type of language at the top of my aol screen

  This occurs just above the board address

  Hello wcabinc, other concerned users related to the question of the extension of Advisor to mcafee site - please try to disable or remove that in case you have now.

  Disable or remove modules

• After the last update of Premiere Pro, AE and Prelude is no longer in effect. Code 0xc0000142

  All other products run perfectly. Does anyone know, how I can fix this?

  Hi Biker VFX,

  All other products run perfectly. Does anyone know, how I can fix this?

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• Network icon is missing from the notification area after the window updated

  I have some problems about the notification for the network and the volume icon!
  They are missing after the window updates!
  I tried to check the "Taskbar and Start Menu Properties' > 'Notification area', Volume and network are grey which I cannot check these boxes. Grateful if you could help me solve this problem!
  Thank you very much!

  Hi VisBo,

  Welcome to the windows vista forums.

  Please follow the steps below to resolve this issue:

  1. right click on the taskbar and click Properties.

  2 tab Area of Notification .

  3 check (on) or disable (off) the options you want or do not want to display on the Taskbar Notification area.

  For the network icon, you can also do with the registry.

  NOTE:

  Please be careful while making changes to the registry, any undesirable changes can affect your operating system.

  1. click on start.

  2. in the start menu search bar type regedit, and then on enter.

  3 Please go to this location in the registry by expanding each location by clicking on the brand more on the left side.

  HKEY_CURRENT_USER\Software\Classes\LocalSettings\Software\
  Microsoft\CurrentVersion\TrayNotify

  4. remove the keys 'IconStreams' & 'PastIconsStream '.

  5. start the Task Manager by pressing ctrl + alt + delete at the same time.

  6. in the Task Manager right click on explorer.exe and kill the process.

  7. click on applications in the task manage, press new task and type explorer.exe, and then press ENTER.

  Explorer will now reboot and your icons should return.

  Alternatively, you can try to uninstall the most recent update that has caused the problem. You can uninstall an update by clicking on the icon of the program features in Control Panel. Select the update that caused the problem, and then uninstall it.

  You can also make a selection of updates to install by setting the windows updates to notify you before installing an update. To open this Panel, and then click windows updates, click settings.

  I hope this information is useful.

  Please let us know if you need assistance.

  Concerning
  Rehman - Microsoft Support

• Icons, windows and adobe acrobat toolbars are very large after the last update

  Im having a problem with the last update of acrobat pro, toolbar, windows, and icons is very big after the last update. how re its size?

  https://www.dropbox.com/sh/pbd33n1q2wirpq3/AABHjSRXo-crpYGVLaOrB2FVa

  Please check the doc: Hi DPI, support Retina display. Acrobat, Reader

• Is it necessary to use the password after the last update?

  Just to make the recent update on 6 of woman and I now can't seem to get by the obligation to set up the thumb and/or password. Absolutely, the last thing she needs or wants to! I have no attention when made my phone, since I already had that. Really how can need to leave off his - I get the installation program. There seems to be a.

  If it doesn't let you go ahead and use a password. Then after the upgrade go to settings > password > and put it on the off position.

• After the last update, the search engine shows a chart containing the symbols of share, recharge and subscribe on my mbp and imac. Please notify.

  After the last update, the search engine shows a chart containing the symbols of share, recharge and subscribe on my mbp and imac. Please notify.

  It is a problem with the extension of the RSS icon (Firefox/tools > Modules > Extensions), so you will have to disable or uninstall this extension until its developer released an update to fix this.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• After the last update wmp plugin is missing in Add-ons, but is still correct installed. Reinstall will not work. What can I do?

  I been lissening to online radio. Necessary to update Firefox. After the last update the windows media player plugin has disappeared from the list of Add-ons, while always being correct installation. I reinstalled it, but that has not worked. I have replaced/deleted some files in firefox as suggested, for similar problems, but that no longer works.
  Now, I can not play wmp files on firefox.

  Hope you can help me solve this problem.

  Found a solution:

  Go in Subject: config and change plugins.load_appdir_plugins from false to true. Apparently FF21 assigns the value false by default causing it to not detect plug-ins installed in this way.

• Pavilion dv7-6135dx screens on the video driver blue igdpmd64.sys after the platform update KB2670838

  Windows Update has delivered platform update KB2670838 Feb. 27.

  After that, any time I open Internet Explorer, I get a blue screen of death which calls igdpmd64.sys, which is part of the video driver.

  I tried to install the latest video driver HP site was for this machine, even though it is dated as a couple of years.  But he says that I don't have the minimum requirements.   !!??

  I tried a restore point before and everything was fine.

  I let go of the front through the platform Windows Update again and the same problem.

  Now today I have no restore point so I can't go back.

  Because now I am simply not using IE, everything else works fine so far.

  Here are my questions...

  1. is this a known problem of someone else?  Is there an article on the best solution anywhere yet?

  2. suggested approaches to solve this?

  3. How can I get the alternative video drivers to try?

  3A. HP Site latest since this laptop says that it does not meet the min requirements!

  3B. should I even try the following more old?

  3 c. pros and cons of try the drivers of Intel or ATI sites instead of on HP site

  4. If after testing things, if I wanted to reinstall my current driver, how 'save', or protect some how now?  (I think THAT it is the original of the 2011 original installation schedule)

  5. How can I do to reinstall the video driver as 'supplied with the machine', for example since the recovery D: partition?

  6. If I end up having to reinstall Windows, how to do that since the recovery partition?

  Hey cfravel,

  All major issues! Sorry to hear that you use in the blue screens, but you did a good job of troubleshooting. I'll answer the questions in the order that you asked them.

  1 and 2.  Here is a link to the Microsoft Forumwhere there was a similar question. It looks like uninstalling and hiding the implementation update will correct the problem. To uninstall an update,

  • Click Start
  • Program 'type '.
  • Click on programs and features
  • Click View Installed Updates (left)
  • Search for KB2670838.
  • Select this option and click on uninstall.

  To hide the update,

  • Click Start
  • Type "update".
  • Click on Windows Update
  • Click Find updates
  • Click "# important updates available"
  • Search for KB2670838
  • Right-click on it and click on hide (you can always restore hidden updates in the future if you want by clicking on "restore hidden updates" from the main screen of Windows Update.

  3. here is the correct driver for your laptop HP Special Page. I think you're probably already doing it correctly, but just in case. How many times have you tried this driver? Try a couple of times.

  3B. Yes you could certainly try the next previous driver.

  3 c. the drivers coming from Intel or ATI are almost the same driver in most cases. We invite you to try them because they can always be uninstalled. Just, they are not guaranteed to work properly for your specific model.

  4. There are two versions of the driver for your ATI video chip. These and all future versions will still be available on your driver page. Click on the link under the latest driver that says "available versions" for a complete list of all the versions that are never released.

  5. to reinstall the driver of origin or any other original software that is preinstalled on your laptop, you can use HP Recovery Manager.

  • Click Start
  • Type "HP recovery".
  • Click HP Recovery Manager
  • Click re - install the drivers and software.
  • Scroll through the list and select drivers or software to install. These drivers will still be available on your page of driver as well.

  6 here is a link on how to reinstall Windows from the recovery partition. In the links in blue at the top, click on "Recovering from the start (in the system startup) screen". This is a very simple process.

  Please let me know if you have any questions or if these suggestions helped (it could help others with similar issues). I'll keep an eye out for your answer!

• Since the installation of El Capitan, my streaming to my Audioengine DAC D2 cut after 12 minutes (the default duration of sleep). It will restart by pressing the space bar. When I change the duration of sleep, the cut outs are becoming more frequent and i

  Since the installation of El Capitan, my streaming to my Audioengine DAC D2 cut after 12 minutes (the default duration of sleep). It will restart by pressing the space bar. When I change the duration of sleep, the cut outs are becoming more frequent and intermittent. Help?

  I checked the wifi and changed frequency (new modem, frequency change made no difference). The Board battery seems fine - all updates well. My computer is an iMac (2011), 3.1 GHz Intel Core i5, 8 GB 1333 MHz DDR3, with a new AMD Radeon graphics card. I recently installed a State strong 1 TB SATA drive and fitted with a LaCie Porsche 4 to USB for backup and a 4TB disk storage RAID LaCie drive.

  I'm frustrated, having to come in my computer since my living room every 12 minutes to continue to listen to Spotify on my stereo system.

  My guess is there a bug in the software of sleep in El Capitan, which disrupts his (I've tried different USB ports connect the Audioengine sender and same thing).

  Should I go back to Yosemite?

  Turiteaguy

  First of all, 10.11.3 OSX just came out. Try this.

• Play Lenovo Vibe K4 Note mobile store does not properly after the recent update...

  After the last update, my game store does not work correctly. A lot of apps is not proceed with the installation an error...

  Help, please

  Hi Digambar,

  Welcome to the community of Lenovo!

  Please perform the below mentioned the troubleshooting for the troubleshooting steps:

  1. go to settings--> Apps--> all Apps-> Google Playstore: clear the Cache, erase the data
  Note: All browsing history will be get deleted.
  2. If the problem is persists kindly update the playstore Google later.
  3. make sure that the update of the system is up-to-date.

  Please come back to us if the trobleshooting helped you.

  Thank you & best regards

• Windows 7 Pro 64-bit not start after the first update.

  Integrated system:

  Motherboard: Version of the BIOS Gigabyte GA-X58A-UD3R revision 2.0: FA

  CPU: Intel Core i7-930

  Memory: 6 GB Corsair PC3-12800 DDR3 Triple channel

  HD: Western Digital Black 500 GB SATA 3 Gb/s

  Water cooler: Corsair H50

  The operating system has been installed and running perfect. Readers for the mobo has been installed and and all is well. I can see everything on my computer, network, disks, programs, Device Manager and etc.

  First update for the system, only the important updates were downloaded and after the reboot, the system will not start. The system to start repairing the system but found no problem and restart again and return to the screen of system repair.

  The operating system has been installed 5 times and I had the same problem after the first update, the system unbootable. I tried to boot from the Windows dvd, but I had the same problem again.

  Can someone help me with this problem?

  Thank you

  M. Vilela

  Hi Danielle,

  In addition to the suggestion of Rock Star, you can try the following steps and check if it helps.

  Step 1

  You can first try to start the computer in safe mode and check if you can boot to the desktop. Access the link below and follow the steps to boot to the desktop. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  If you are able to boot to the desktop in safe mode, you can access to view the history of update on your computer and search for the error code and the updates that failed to install and post it back.

  To view the update history, follow the steps below:

  A. open the control panel (all items view) and click the Windows Update icon.

  B. click on the link to view update history.

  To view the details of a single Windows Update. Select and right-click on a Windows Update list, and then click details.

  Step 3

  I would say also allows you to perform a system restore in safe mode to see if you can restore the computer to an earlier date when it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click on choose a different restore point and then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Access the link below to learn more about how to repair the operating system and how torestore configuring operatingsystem to a point in time earlier in Windows:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer