InDesign CS5 file types not recognized in Windows

Similar Questions

• InDesign CS5 file does not open

  At my work, we work on the formatting of a book in InDesign. We use the same basic model for each file. I created a document preliminary pages with a table of contents (TOC), list of figures (LOF), list of tables (LOT), acronyms and glossary using this basic model. Everything worked fine; I was able to generate the TOC, LOF and MANY and could work with the file without problem. Then I saved and closed the file. Later that day, I was unable to open the file.

  The message I get includes the statement, "you might not have permissions or the file can be opened already."

  No one else was open, and there is no file locking. The other person using InDesign also cannot open it. I made a copy of the file and saved in another location and still couldn't open it.

  The files are all on our network. We use InDesign CS5 and Windows7 (64-bit). The only difference between this file and the others are the changes that I made to certain styles of paragraph OCD so two paragraphs could be displayed side-by-side in the table of contents (e.g., Chapter 1 Introduction on a single line, where Chapter1 comes a paragraph and Introduction by another with no leading on the style of a paragraph).

  Can anyone suggest a solution for this? It's quite urgent because the client must book at the end of next week.

  Thank you very much for your help.

  Kind regards

  Marina Michaels

  Try to open it as a copy option in the dialog box.

• .mov file extension is not recognized by Windows Media Player

  original title; Media Player

  When I try and play a movie on my camera which is a Canon I get a message that says this file has an extesión (mov) and is not recognized by windows media player, what should I do to correct this

  You (possibly or) missing a codec.

  I suggest you only install this codec pack.

  http://www.free-codecs.com/download/Vista_Codec_Package.htm

  Main Page: click, download Vista Codec Package

  Second Page:

  Download Vista Codec Package 6.3 first a: 32 bit .zip File

  Download Vista Codec Package 6.3 second one: 32-bit .exe file

  Download Vista Codec Package 6.3 third one: 64 bit .zip File

  Download Vista Codec Package 6.3 fourth one: 64-bit .exe file

  This is the free safe and the best package on the web.

  He'll play 99% of files, so you will not need to download or use other programs.

  You can check here to see what's on your system.

  To check: Open Media Player, click Help in the menu, on the Windows Media Player, Technical Support information.

  Click here to see if you have 32 or 64 bit:

  Control the look of Control Panel, system, under System Type:

• Error when you try to view videos of the Kodak Easyshare touch camera: the selected file has an extension (.) (THM) which is not recognized by Windows Media player.

  Camera video will not play on the computer

  I recently bought a Kodak EasyShare touch camera.  Love it, but for some reason some will not play videos from the camera to my computer.  He will say: the selected file has an extension (.) (THM) it is not recognized by Windows Media player.  Any suggestions?

  . THM is a thumbnail of the file... not a video file. I suspect that your
  Kodak records in the. MOV or possibly. Film MP4 format.

• InDesign CS5 and can not find the download of this version

  I need to re - install indesign CS5 and can not find the download of this version - I can find CS5.5 and my serial number is not valid for this version

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Yoga Pro 2 - display not recognized in windows (hardware or driver problem?)

  Out of warranty by a month!

  Yoga Pro 2-256 gb, installed a new wireless card a month ago. Windows 8.1

  The touchscreen still work while the screen is black.

  System restarted after the mode 'sleep', in my opinion.

  The Lenovo logo is displayed, seems to load Windows, but when windows loads (I don't see it so it is a hypothesis of load) drafts of the screen and the black light is on.

  Can I connect an external monintor that connects after the return from sleep mode (odd). Who then off the backlight.

  When the external monitor, the internal screen is not yet recognized by windows.

  When I boot in safe mode, the internal display works fine with of course limited capabilities.

  I rebooted on the support site display drivers.

  Right now my internal monitor is not recognized by windows and is dark, and I can use an external monitor.

  Someone at - he of the clues as to what my happen? Hardware, driver etc?

  Can what information I provide?

  It is a pretty weird problem with contradictory observations.

  (1) screen working in Mode safe but not regular boot. (So not the hardware problem)

  (2) display on an external monitor in normal mode. (So, no drivers issue)

  Have you installed the wireless card yourself? You unplug the cable from the screen during the installation of the card?

  Could you re - open and check that all connections are good?

  The Wi - Fi card works well?

  I also recommend a complete reset of the laptop to eliminate the possibility that it is a corrupt driver. You can use the NOVO button to reset your laptop. Make sure you make a backup on an external drive for your personal files.

• Error message - browseui.dll file is not a valid Windows image in the Windows XP computer.

  Original title: how to fix browseui.dll without original windows disc?

  Hello

  Well, kids, here's the deal.

  I myself locked out of my computer and installed PC login now erase my passwords. It has worked flawlessly, and I now have my computer back after months and months.

  There was only a single small strangeness: whenever I connected my computer, he asked me to check my drive. Looking forward to get my computer and running and customized how I like it, I bypassed it the first few times. Then, when I had a few minutes, I thought I had better let the disk check, so I left it.

  NOW, when I turn on my computer, I get an error message that my browseui.dll file is not a valid windows image and my windows Explorer does not work. So I've been doing on the web looking for a solution via the Task Manager, which is a pain. Someone suggested to use the scannow in the command prompt command line, so I tried, but it requires my disk of windows XP which I think can be in a different State with my mother.  So I simply bypassed it whenever he had the drive and VOILA! all peachy.

  Until, that is, I turn on my computer again. We're back in the same place.  Well, this analysis running and without going through the disc each time took me about an hour, and I can't do that whenever I need to use my computer.

  I tried the system restore, no change. I tried from the command prompt and choose a date AND choose "last good configuration" in the menu f12 or f8.  Without peanut.

  We are this:

  1. is there a way to correct this file without the disc?

  2. can I get another copy of the disk without having to buy it?

  3. Although I'm not PARTICULALRY, would be the Windows 7 upgrade solves the problem? (But I really like my XP...)

  If the c:\windows\system32\browseui.dll file is damaged or missing, Explorer.exe does not start and you may see a message like this:

  If the c:\windows\system32\browseui.dll file is corrupted, Explorer.exe does not start and you will see a message like this:

  Explorer.exe - bad Image
  The application or DLL C:\WINDOWS\system32\BROWSEUI.dll is not a valid Windows image.  Please check this against your installation diskette.

  You can click OK and get to an empty office with only your display background image but still be able to maneuver with the Task Manager.

  If missing the c:\windows\system32\browseui.dll file, Explorer.exe does not start and you will see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because BROWSEUI.dll was not found. Reinstalling the application may fix this problem.

  You can click OK and get to an empty office with only your display background image but still be able to maneuver with the Task Manager.

  Since we know that XP keeps copies of critical system files in the dllcache folder, you can use the Task Manager to replace the file missing or distressed.

  From the Task Manager, click file, new task (run...) and then click Browse and navigate to the c:\windows\system32\dllcache folder.  Make sure the "Files of type" box is set to show all files (or you will not see any), and then click OK to display all files.

  Locate the copy of the browseui.dll file backup in the folder c:\windows\system32\dllcache, made right click and copy and go back up a folder c:\windows\system32, right-click in an empty area and paste the file there.  Answered in the affirmative if invited to replace the existing file.

  You can then start the Explorer in Task Manager by clicking file, new task (run...) and in the "Open:", enter:

  Explorer.exe

  Click OK to launch the Explorer and your office must return.

  Or after replacing the file missing or suspicious, just restart the system task manager by clicking on stop and choosing restart and then Explorer will start to him only when the system is restarted.

  If your computer to check your drive at every reboot, which means the "dirty bit" on the volume was probably settled and the only way to clear the dirty bit must run a chkdsk/r (which XP trying to do).   The dirty bit can be defined on a volume if there is a power interruption e.g. (plug pulling, using the power button / stop, etc.).

  Sometimes, XP can't erase the bit of impurity in this way and it is preferable to run chkdsk/r from the XP Recovery Console so you can actually see what he does and run it again if necessary.

  If you do not have any bootable media XP start in the XP Recovery Console, you can create a bootable XP (no XP media required) Recovery Console CD and do all your work from there.

  You can even replace the file browseui.dll from SP Recovery Console if it is your desire.

  Need instructions to create a CD of bootable XP Recovery Console?  No Microsoft Support Engineer seems to know how to do this, but I do and will instruct you in the next reply.

• DROID 2 not recognized by Windows media player to synchronize.

  Use Windows 7 and my DROID 2 shot used to synchronize with windows media player... run troubleshoot for the droid 2 and it says it resolved the problem, but the droid 2 is not recognized by windows media player to synchronize. It worked before, so I put still back the system and still no luck

  Hello Jack Cromwell.

  1. is your 2 Driod recognized in Windows Explorer and the Device Manager?

  2. did you of recent changes to the computer?

  I suggest you check if the Driod 2 is detected in Device Manager.

  Also try reinstalling the drivers for the device. Follow the steps to reinstall the drivers for the device:

  a. Click Start. In the start search box type "devmgmt.msc", and then press ENTER.

  b. Locate the (Driod 2) device in Device Manager.

  c. click on the "Driver" tab, click "Uninstall".

  Note: Make sure you have source to reinstall the drivers before you uninstall the drivers.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• The lack of CD/DVD drive - not recognized by windows or other programs

  help-tried several fixes m/s and fix it but did not help. Here are a few messages I get: when in the details of the driver for my Sony DVD + RW AWQ160s - update drivers: here are 2 notches and uncked 2, one by Sonic Solutions and a Roxio time saying no digitally signed (that would be a problem)?  also when I look at update or install the updated driver, after that search, I get this is the best driver for this device - I don't have this device Ouch!  Without my CD drive E work of course I can't even try reinstalling drivers/utilities cd... can someone help this computer incompetent gal?  I'm ready to wipe and reinstall vista I have other problems like IE does not and ms word does not always.  I did go back several times, and perhaps not far enough back but had a Trojan horse and do not want to deal with it again.  thx for any help

  Hello

  (1) would you please provide more information about the problem you are having with word and Internet Explorer?

  Method 1: You may need to reinstall Roxio on your computer, please see the article below for programs that can cause this problem:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

   

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CD/DVD drive is not recognized by Windows or other programs. HP Pavilion s7310n Slimline PC

  He used to work. It comes from when the computer was around the age of 4 months. should have put in, but could not take the days off to bring it back to BEST BUY - 2 years ago.

  Then... the CD/DVD drive is not recognized by Windows or other programs. If I insert a CD as Photo Suite III or any what CD/DVD, the green light comes on but no rotation and not even a warning to error.

  Now what? How can I find out / know the specs of what to look for a replacement/new one... I lost the book in my move to Florida. I have tried all sorts of key word in GOOGLE and I am half blind and tired to be re-directed to sites that have nothing to do with my question.

  Can someone help me please? Thank you. TJ Rev.

  PS... None of the links in the Solution of Sissy2 DIFFICULTY to where they are supposed to. I don't think it's my problem anyway.

  MY CD/DVD drive is dead.

  Message edited by aalienlady on 05/21/2009 21:32
  Message edited by aalienlady on 05/21/2009 21:32

  Download XP_CD-DVD - Fix.zip and save this file on your hard drive. Navigate to where you saved it, and double-click the file to extract the content. Find the EXE file that you extracted and double click it.  A confirmation dialog box appears when the script is done.  You may need to reboot for the change to take effect. Works on XP and Vista. Good luck!

• I have a problem with the passoword not recognized on Windows 7.

  Original title: password not recognized by Windows 7

  Hello

  My father has a Windows 7 PC. He wants access to his PC with a password. After you set the password for the account in the configuration, it is not possible to use the password login; the answer is that the password is not correct. When I then log on to the computer with a different account, and try to reset my fathers a non administrator account password, I ask myself to use my user name of fathers and provide the password for my account of fathers (he is administrator). When I enter the password, it is accepted as correct. How can I set a password for my fathers account and use it to open a session? Are the different passwords for 1 account?
  Please note that it uses a personal account with administrator rights. The computer has been scanned for viruses with Norton 360 several times.

  Kind regards

  Steafn

  This type of problem is caused by one of the following reasons:

  • CapsLock is on
  • NumLock is on
  • You have more than one keyboard language installed. When the session opened, a different card is used subsequently. Use a password that is insensitive to the evolution of your cards. Start by '123456' confidence.

• "Sorry, Move Maker cannot open this project file. The file is not compatible with Windows Live Movie Maker or damaged. Please select a different project file. »

  Hello!
  I installed Win Live Movie Maker, but when I tried to open my .mswmm file I only got this message: "sorry, Move Maker cannot open this project file. The file is not compatible with Windows Live Movie Maker or damaged. Please select a different project file. "The file will open correctly in Windows Live Movie Maker 7, so everything should be OK. What I am doing wrong?

  Hello

  This is supported in Windows Live movie maker file type.

  http://help.live.com/help.aspx?project=wl_movie_makerv1&market=en-IE&querytype=topic&query=wl_movie_maker_ref_supportedfiles.htm

  For any request or problems related to Windows Live Movie maker, please post to the Windows Live Help forum.

  Here is the link: http://www.windowslivehelp.com/product.aspx?productid=5

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Fortunately, I have download my Canon 7 d CR2 files using Photoshop elements 11; but when I do the same thing with a Canon G7X files are not recognized.  I downloaded the latest update of Adobe for RAW files.  Advice gratefully received.

  Fortunately, I have download my Canon 7 d CR2 files using Photoshop elements 11; but when I do the same thing with a Canon G7X files are not recognized.  I downloaded the latest update of Adobe for RAW files.  Advice gratefully received.

  You need Adobe raw camera 8.7 version. Unfortunately your software is earlier than the camera. ACR 8.7 is only compatible with PSE13. But it is possible to download and install the free DNG Converter to convert your raw files to the universal Raw format files and Adobe will be open in all versions of PSE (keep your originals as backups and for use in the software of the camera factory)

  Download Windows (.exe file) click here DNG Converter 8.7

  Download Mac (.dmg file) click here DNG Converter 8.7

  You can convert an entire folder of images raw with a single click. See this quick video tutorial:

  You Tube click here for the DNG Converter tutorial

• iTunes re-download-file dmg not recognized!

  I deleted iTunes from my mac that I had an entirely different matter - unable to subscribe to or download podcasts - and several people suggested to re install.

  However, I am unable to re - install all versions, as the download will still for a while then breaks down, saying the DMG file is not recognized.

  Any help?

  Clear your browser cache and then redownload from http://www.apple.com/itunes/download/.

  TT2

• Stor.e slim not recognized by Windows 8.1

  Hello

  A Stor.e slim external HARD drive is not recognized in Windows 8.1 (no problem with Windows 7). When it is plugged in, it s shown as a device not recognized. Driver is requested but not found.

  Hello

  Stor.E Slim external HARD drive is a 2.5 HDD USB 3.0 and 900mA power it requires to work correctly.

  I suppose that there is nothing wrong with this HARD drive, but with your laptop.

  8/8.1 win requires different drivers and you will probably need to install a suitable driver in order to get the USB ports work correctly (USB 3.0 as well as the driver additional chipset would be also necessary).