InDesign CS5 "unable to copy the necessary or related files" when packing

Similar Questions

• Error message "unable to copy the file"hiberfil", it is used by another person or program." Problem copying content from your PC to external hard drive.

  Original title: problem to copy content from your PC to external hard drive.

  I use Windows XP 2000 and am trying to restore my pc to factory settings as it is continuously 'stick '. When you try to copy my drive "c" on an external drive I get a message saying "unable to copy the file"hiberfil", it is used by another person or program." Close any program that might be using the file and try again "." What is 'hiberfil' and how do I close it down as I am not aware that I use?

  Concerning

  Pete

  The hiberfil.sys will be created every time that you start... If you put in hibernation enabled in your control panel, Power Options and the file is 'open' to think that you can actually choose to Hibernate at any given time.  When you Hibernate XP gives a note of it and will write a hiberfil.sys sometimes important in the c:\ folder so that when XP fires again upwards and returns from hibernation, XP will read the hiberfil.sys file and return to the situation that you were in when you put into hibernation.

  I use to be a chronic hibernant because it takes less time to return after hibernation as a cold start.  Sometimes, it can actually be slower that a cold so start your system based on the amount of RAM has.  The more RAM you have, the more your hiberfil.sys will, if sometimes it's faster to move with just a cold start if you Hibernate (26,03 seconds for me).

  If hiberfil.sys is giving you a hard time (you would not in any way copy it) disable hibernation in your Power Options and the file will be deleted immediately since it would be is no longer necessary.  That would solve this, but if you are trying to copy the entire C drive, you will have other files to complain after that.

  It is certainly possible to make a complete copy of the C drive, if you want, but you will have to initialize on something next to your drive hard if you want to do this so the XP files are not used - then you can copy anything and everything.  You can get some imaging software of disc that will also help you.

  It depends on what the problem is you want to solve and what you wand to end up with when you're done (so far, unspecified).

  I would work on figure our why your XP is paste and fix it in place.  XP should not be sticky.

• Print file stuck in the coil, the message "unable to copy the name of the file: it is used by another person or program".

  Recently, I tried to capture a job by a break of a print queue, print work and copy the files from the spool (under C:\WINDOWS\system32\spool\PRINTERS) before unpausing the queue. However, when I try to copy the files, I get the error message "unable to copy the name of the file: it is used by another person or program". I tried several times with the same result. The only way to get the file off the ground is obviously t reactivate the print queue and they will quickly deteleted shortly after. Is there a way I can recover these files? Assume the change the port in 'File' to make a copy of file is on the table. I ran this in the title of administrator user rights.

  The file you are trying to "capture" you will do some good.  However, if you want to watch or copy it, first stop the print spooler.  Open the Services applet (start > run > services.msc > OK).  Scroll down to "Print spooler" and click "Stop".  Don't forget to restart the print spooler after you copy the file or you will not be able to print.

  

  If you want to print to a file rather than on paper, there are at least three ways to do it (not counting "Print to a file").

  Using the "Print to file" box will produce a *.prn file.  It contains commands specific to the printer; It cannot be opened by the usual word processor applications; It can be used to print to the printer selected in the print dialog box or printer that uses the same commands to the printer.  For example, you have a printer installed on 1 computer but you have physically moved the printer to computer 2, where it is now installed.  You can check the "Print to file" on the computer 1, save the file to a flash drive *.prn, carry it to computer 2 and then print it out by copying the file to the printer (in a command prompt window).

  1. the best way, IMO, is to print to a PDF using free CutePDF Writer.

  2. you can create a "generic, only the text" printer and select this option when you print.  This produces a *.txt file.  To install the generic/text printer only, follow these steps:

  1. Click the Start button, point to settings, and then click Printers.
  2. Double-click the add printer icon.
  3. Click the next button.
  4. When you are prompted "How is this printer attached to your computer? Click the local printer option button, and then click Next.
  5. In the manufacturers box, click Generic. In the Printers box, click generic/text only, and then click Next.
  6. In the available Ports box, click FILE, and then click Next.
  7. When you are prompted "do you want that your Windows-based programs to use this printer as the default printer?" click the no option button, and then click Next.
  8. When you are guests "would you like to print a test page?" click the no option button, and then click the Finish button.

  3. use the Microsoft XPS Document Writer, which may already be installed on your computer.  "XPS" was Microsoft's attempt to compete with Adobe PDF.  He did not.  Unfortunately, the only way to view a document produced by the XPS Document Writer is using the Microsoft XPS Viewer.

• I lost all the contents of my files when I moved a folder to a new folder.

  I lost all the contents of my files when I moved a folder named my file which was a lot of archive folders inside subfolders to another folder named Folder1 My, who was not in the archive folders...  I have a copy of my portable hard drive on a hard disk, how can I recover the lost files from it?  I have Outlook 2010 and Windows XP Pro.

  Hello

  1. What do you mean, you have a copy of the portable hard drive on a hard disk?

  2 do you mean that this means that the files that has been removed from your computer are always present in your portable hard drive? And you want to copy the files on your computer?

  Try to find if the files in the recycling bin. Also if the files are present in your computer and have not got deleted follow the link below to

  Search for files and folders in Windows XP

  http://support.Microsoft.com/kb/308895

  It could be useful!

• How can I fix the problem of 'linked file' when opening file on other computers?

  How can I fix the problem of 'linked file' when opening file on other computers?

  The links must travel with the illustrator file. In other words, you can't send someone your page layout and not send them all the assets placed in the layout. However, you can embed links, but their incorporation will make your file much more available.

  Use the links Panel to incorporate images. Click on the small icon in the upper right corner of the control panel link drop-down list. I've included a screenshot.

  

• InDesign CS5.5 cannot select the tool move

  I have InDesign CS5.5, installed on a desktop computer (Windows 7 Home) and it works fine. I installed it on a second desktop computer (Windows 7 Professional). It seemed to install and update fine. However, if I create a new document and drag a rectangle I can't access the move tool to move and I can not change the size and position using the boxes below the menu bar.

  All of the suggestions.

  Tony

  See the signs and tools InDesign respond not to the clicks of the mouse (Windows 7/Vista)

• InDesign CS5 - failed to open the file. Please update your plug-ins for their latest version, or...

  InDesign CS5 - cannot open many indd. file. You can see exactly what will happen in the screenshot fallow. Updates and upgrades, in fact.

  What can I do to open the indd. ??? TX

  

  These are CS5.5 files and can not be opened directly in CS5. They must be exported from CS5.5 to the .idml, and these files should open in CS5.

• Unable to copy the file when windows installation...

  I want to install window on my pc... but when step copy the file, that it has almost no...

  I try to use a different installation cd, but the same problem must out when copying files...

  someone help me please...

  IM sory for my bad English... :-)

  Check this thread: -.

  http://social.answers.Microsoft.com/forums/en-us/XPInstall/thread/0b5f9099-e934-4818-b2cc-41dd0edd3f13/

• "Unable to copy the related files needed" when you try to package files

  I try to files in the package for a client and I get the message "cannot copy the related files needed. Nothing shows as missing or inaccurate.  Someone else encountered this?

  The InBooklet plugin has nothing to do with the links or packaging - it was the old tool tax inside the code. I think it's a red herring, and you really need check the names of folders and files for think like slashes and asterisks.

  What version of InDesing. do you currently use and what OS?

• Copy the old Time Machine files to the new disk TM

  Sorry people, I have to ask two (related) questions:

  (1) I have a WD My Passport for Mac drive connected to an Airport Extreme and 2 Macs use for backup via Time Machine. Now, the disk is full. I bought a WD My Book for Mac drive with a capacity of 4 TB and am ready to go.

  Question: can I copy the old files of Time Machine on my new book?

  (2) until now 2 different Macs used the My Passport as a Time Machine drive with no problems.

  Question: Should I partition the new drive (My Book) and every Mac uses its own partition as Time Machine or can proceed us as is?

  Thank you very much for your help!

  Question: can I copy the old files of Time Machine on my new book?

  Yes you can, but there is a lot of work, a little complicated, time consuming and not worth the effort for most users.  The main reasons for this are...

  (1) the older backups will take a good amount of space on the new drive, limiting the space on the disk again.

  (2) Time Machine backups for the old files will continue... it will make a new copy of every Mac and then go forward again with incremental backups.

  A better plan would be to keep the old drive on hand for a few months, in which case you need to go back and look for a file. After a few months, you will have a beautiful story from backup to the new hard drive and no need of older backups so you can remove the old disk and keep around as a spare part or use it for other purposes.

  Question: Should I partition the new drive (My Book) and every Mac uses its own partition as Time Machine or can proceed us as is?

  While you can partition the drive and save each Mac to a separate partition if you wish, there is really no need to do this since Time Machine will automatically create separate for each Mac backup files.

• How can I copy the name of a file, I selected by clicking?

  Hello

  I have a camera controlled by an interface Excel (VBA). Truogh this interface I control motors and tiara (to the report) and the data record in a database. When I use the load of the Excel button, the VBA application call the script Load_DATA_BOF tiara. VBS, (after completing the new data for the report) and the report.  Now for what it work, I copy the name of the name of the file that I want to load in a TextBox control, and all data are to be stored in a txt (protocol_for_load.txt) file and the tiara takes away the data for the report.

  What I want to do is to fill automatically the name of file in the protocol_for_load.txt field, when I select the file in Diadem.

  Is this possible?

  Thank you for your time

  Hi again,

  I solve the problem myself.

  FileNameProtocol = filedlgfile
  filenametxt = "D:\BOF-MIU\Scripts\Protocol files\" & filenameprotocol & ".txt".

  FNO = textfileopen (filenametxt, tfread)

  I forgot to bitch a few symbols: ' and------. "

  I told you I'm new with VBS and I have some problems with the basic stuff: how to include a variable, a function and I forgot some time to put all the signs of the script.

  Thank you for your time.

• Installation of windows for a netbook without cdrom, how to copy the instalation of windows files on a flash drive.

  HY
  I have a HP 311 netbook.
  My windows vista family premium get does not in this regard and I decided to reinsta of a windows dvd because when I buy that I forgot to do the recovery disc.
  My problem is that I don't have any cd/dvd external drive.
  I closet on a program that is set to copy the instalation disk to a flash drive and bee able to install from that but I culd' faind t.
  Please bee kind and give me a solution.
  Best regards.

  http://welcome.HP.com/country/us/en/contact_us.html

  I'm sorry, but you need to contact the manufacturer of Netbook on this subject.

  There are too fishy advice on the Net start from USB to recommend a method

  They will have the Options of reinstalling Vista available for their Netbook, because they produce a lot of them.

  Take the Option to plant, where to do otherwise may affect your warranty.

  See you soon. Mick Murphy - Microsoft partner

• How to copy the database using rman file from another location.

  You can clone data base using the files of rman backup from somewhere else (on the server to clone).
  
  I have two server db source and clone db server.
  I normally copy the files of RMAN backup to clone server (under the same folder structure, as it was on the source server).
  
  The purpose of the test, IE I don't have same partition and free space on the source server and the clone.
  
  I usually use under notes to the clone.
  http://trysellit.com/hosting/Ttrail/Fajr.php?doc=wtrail & ND = 0556200
  
  I would try to explain for example again.
  In source server, my rman backup are stored in / U01 and clone server, I copied the files of rman /u04. What step I should take to clone to work anywhere else?
  
  Using Oracle 10 g on Linux RedHat.

  sape007 wrote:
  Thanks Ken & PrafullaNath.

  BUT my question is: how to transport .dbf files in another place on the clone (I already do).

  Rather:
  The clone is on another server. How to restore by copying the RMAN files from another location on the clone. Please read description above in its entirety.

  Sorry for not being clear.

  Please see my video tutorial. In this tutorial that I take backup of the database, copy the backup to the different server and perform a recovery disaster

• InDesign CS5 v7.0.4 "Recreate a link to file Extension" does not not, impossible to jpg files

  July 25, 2011 11:57

  This issue is no answer.

  
  

  Some tips on how to get the function of 'Linking the file Extension' in the drop down menu of links to work?

  I am trying to share a bunch of rgb jpg to psd CMYK files by using this feature, but it does not work.

  I get the message: "cannot find links. These links have not been connected and will remain selected in the links Panel. »

  I packed the file with rgb jpg and place the psd CMYK files in the folder of links packaged and attempted to link to them, but the ID cannot bind to the PSD. Although I am able to place them one at a time.

  Is there a way to clean ID's preferences, or another trick to get this feature working properly?

  see you soon

  Make sure that you are NOT including the '. ' before the new extension.

  G

• Failed to retrieve the configuration of database file when installing EBS on 2 nodes

  I try to install EBS 12.1.1 on two different nodes on Redhat Linux 5. After properly installing the database on node1 (ebsdb), I started rapidwiz on node2 (ebsapps) to install the application technology. When I get to the screen where it asks "Do you want to create a new configuration or load a saved?", I chose to load a saved configuration, typied in the database connection information (ebsdb.sparkdb.com:PROD:1521) and get the following error. Anyone know what I am doing wrong? I am able to ssh to ebsdb to ebsapps and vice versa, and the database and listener is in place.
  
  Failed to retrieve the database configuration file.

  user564785 wrote:
  What file must be copied from DB node to the node of Apps and what place?

  conf_.txt - http://docs.oracle.com/cd/E18727_01/doc.121/e12842/T422699g54568.htm

  You can copy the file to any place on the application-level nodes.

  Thank you
  Hussein