Unable to copy the file when windows installation...

Similar Questions

• When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties

  I move the file from my old PC which took place with Vista on a new computer running with Win 10 where I have Windows Live Mail is installed.  When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties".  After studying this issue on the forums, a proposed solution was to reformat the drive in NTFS format, I did.  This does not solve the problem.  Any suggestions?  Would it be OK in this case to ignore the message and copy the file without its properties?

  Well data files/user of vista should work. Yes a NTFS format is good, go to run, or cmd, type:

  diskmgmt.msc in msc, R.click on the material, delete the partition, create one, format. Use the default settings,

  Once thru, L.click the disk, go to actions, all, select 'enable '.

  In addition, live windows for vista is microsoft discontinud

• Error message "unable to copy the file"hiberfil", it is used by another person or program." Problem copying content from your PC to external hard drive.

  Original title: problem to copy content from your PC to external hard drive.

  I use Windows XP 2000 and am trying to restore my pc to factory settings as it is continuously 'stick '. When you try to copy my drive "c" on an external drive I get a message saying "unable to copy the file"hiberfil", it is used by another person or program." Close any program that might be using the file and try again "." What is 'hiberfil' and how do I close it down as I am not aware that I use?

  Concerning

  Pete

  The hiberfil.sys will be created every time that you start... If you put in hibernation enabled in your control panel, Power Options and the file is 'open' to think that you can actually choose to Hibernate at any given time.  When you Hibernate XP gives a note of it and will write a hiberfil.sys sometimes important in the c:\ folder so that when XP fires again upwards and returns from hibernation, XP will read the hiberfil.sys file and return to the situation that you were in when you put into hibernation.

  I use to be a chronic hibernant because it takes less time to return after hibernation as a cold start.  Sometimes, it can actually be slower that a cold so start your system based on the amount of RAM has.  The more RAM you have, the more your hiberfil.sys will, if sometimes it's faster to move with just a cold start if you Hibernate (26,03 seconds for me).

  If hiberfil.sys is giving you a hard time (you would not in any way copy it) disable hibernation in your Power Options and the file will be deleted immediately since it would be is no longer necessary.  That would solve this, but if you are trying to copy the entire C drive, you will have other files to complain after that.

  It is certainly possible to make a complete copy of the C drive, if you want, but you will have to initialize on something next to your drive hard if you want to do this so the XP files are not used - then you can copy anything and everything.  You can get some imaging software of disc that will also help you.

  It depends on what the problem is you want to solve and what you wand to end up with when you're done (so far, unspecified).

  I would work on figure our why your XP is paste and fix it in place.  XP should not be sticky.

• Delay of the dialog 'Copy the file' when you drag a file to a folder that already contains.

  Delay of the dialog 'Copy the file' when you drag a file to a folder that already contains.  The dialog box only appears when that I disconnect.  In fact this problem can seriously mislead the user. The file has been copied to or not? This is a serious shortcoming of the operating system.
  A similarly delayed dialog box is to join files on a send to the recipient of the message.

  What is the cause of the delay? Dialog boxes are not under other windows - they break on screen as I log out.

  When I drag AGAIN the same file in the same folder, then I get a message that "the action cannot be completed because the file is open in another program.  (No doubt the program who was trying to copy in the first attempt and waits for a response to the dialog box may not show me!)

  Hardware: Computer laptop Asus M70.  VISTA Ultimate with the latest patches.

  Lorien, thanks for your response.
  A lot of time and effort was exercised in an attempt to find out WHY. I wanted to not just fix the symptoms. It concerned me greatly as a basic function of the operating system does not work. He was not fit for purpose. In the end I found that a third-party application compromised of WINDOWS VISTA 32-bit operating system. If an operating system can not reliably inform the user that an operation is successful or not, it is worthless. In the case above, I didn't move the files was a success (no response required) or the delayed response until I signed.

  In addition to the original problem, there was the following problem: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/24068518-31e0-4b23-823b-d54882792301 where "send to..." 'Recipient' disable the context menu in Explorer for JPG does not or not broken.

  Finally, I figured out the following error had something to do with my problems:

  Description:
  The server {AB8902B4-09CA-4BB6-B78D-A8F59079A8D5} is not registered with DCOM within the required time.
  

  -

  -

   

   10010

   0

   2

   0

   0

   0 x 80000000000000

   

   198817

   

   

   System

   ASUS_M70VM

   

   

  -

   {AB8902B4-09CA-4BB6-B78D-A8F59079A8D5}

   

   

  Arriving in my solution, I was inspired by the following articles http://blogs.technet.com/markrussinovich/archive/2006/08/31/453100.aspx     http://blogs.technet.com/markrussinovich/archive/2006/11/27/532465.aspx
  So I downloaded the MS debug tools and confirmed my suspicion of dllhost.dll using REGEDIT to set debugging on that.
  To cut a long story short, it's DivX 7.2 which caused me grief.  In particular, the file DivXDecH264.ax 'has an access violation - code C0000005 (first chance).  It has been autonomous in DivX Plus DirectShow Filters.     Thus, when it has been deleted (starting other Articles to original install DivX) through Control Panel of configuration/programs and features my system worked perfectly well.

  I know SFA on the architecture of Windows but why was this DivX file loading and cause an access violation whenever I used the windows Explorer?  How an operating system may fail in a basic function of by a third party issue?  There are some newspaper where this access violation was recorded?  It was only possible to identify it in debugging?

  What you fella?

• What does it mean when windows 7 can't copy the files required for installation?

  I tried to install windows 7 on my Dell.I have xp on it, but when I run the first step of copying the files it stops to 60% and says "windows cannot copy files required for installation. Make sure all files required for installation are available, and restart the installation. How can error code 0 x 80070001"I fix?

  See if this post is of no help: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/error-0x80070001-cannot-copy-files-needed-for/e2b51d33-adad-43a1-b37f-19537bdfee2a

  J W Stuart: http://www.pagestart.com

• A network error occurred trying to read the file c: WINDOWS\Installer\iTunes.msi

  I'm not able to go to iTunes or watch videos on my program Corel due to an error in Quick Time. It keeps telling me that I need to improve my Quick time and when I tried it wouldn't let me so I tried to remove it and couldn't because of an error and then I came here to get the Windows Cleanup utility and who eventually removed the program out of my control panel and I thought that would fix it but it didn't and now it gives me this message. What should I do now?

  Ok!
  This problem occurs in all applications in all environments such as Windows XP, Amiga and Windows 7. I have only my current computer with Windows 7 64 bit related to the problem. After following suggestions to cure the problem without success, I read the error message that displayed the MSI being read in C:\Windows\Installer. There is no such MSI placed in this directory. SO to solve the problem, you must put some Apple msi installation which gives the error message in the C:\Windows\Installer directory. Just drag it directly into the directory. Do not use any subdirectory. If your don't have a copy of the MSI, you can extract it from the EXE installer with a program like WinRar. My problem was with iTunes to bleed the system looked like this C:\Windows\Installer\iTunes64.msi. Run the MSI file or the original from Apple download. It worked for me as expected if you give it a try.

• Error 1316 a network error occurred while attempting to read from the file c:\windows\Installer\HP Active Library.msi of support

  HP Total Care Advisor PC begins with start up.  Recently, windows close program.

  I thought I found a solution that was told to copy the HP Totalcare Lbrary of c:\swsetup in c:\windows\installer

  The people who did this were delighted.  He has not worked for me HP has NO response that I think is outrageous!

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to access the files from Windows 7 computer to Windows 8

  Hello

  I have Word 2007 on two computers, and each has Windows 7 or 8.  I'm trying to share with homegroup.  My goal is to keep my documents on Windows 7 system and access the files (read and edit) the system of Windows 8. I don't want multiple documents, I want just one version.

  After you open the docx Word read-only, I did some research and discovered that if I go to the file on the computer with Win7, made a right click on the file, then select residential group read/write, I would then be able to access the computer of Win8 file and edit and save it.  I was able to do this.

  OT: Word 2007 ReadOnly

  To make sure that I could continue to do so, I tried again (by selecting the docx on the Win7 system since the system of Win8).  I received one copy read the second time.  What should I do to edit and save the Win8 computer capabilities, without having to physically run to the Win7 to allow access?

  Thank you

  Hello

  Thanks for posting your question in the Microsoft Community.

  The description above, you want to computer Windows 7 to Windows 8. I'll be happy to help you on this question.

  This problem may occur if the file share on the computer are not correctly enabled. I suggest you try the steps from the following links:

  Share files and folders on a network or shared PC
  http://Windows.Microsoft.com/en-in/Windows-8/share-files-folders

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Share files via public folders
  http://Windows.Microsoft.com/en-us/Windows7/share-files-using-the-public-folders

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• When I try to install service pack 3 I get a message saying "Setup cannot copy the file c:\windows\system32\drivers\mrxdav.sys.

  He asks me to specify a location and also proposes to ignore this file that I don't know what to do

  Hi Lisa,

  You are able to correctly install the other updates?

  You can follow this link & check if the problem persists:

  How to troubleshoot an installation fails in Windows XP Service Pack 3?

  Hope the helps of information.

• Unable to save the files in Windows Movie Maker

  NEED HELP now Windows Movie Maker CRASHING! Project due tomorrow

  Help! It is 9: 40 EST and my video girls ' school project is due tomorrow, my WMM crashes when I try to "Save movie file" is only 6 minutes long and time continues to go up instead of down trying to save until he finally locomotives upward and I get the message that WMM has encountered a problem and needs to close. HELP HELP HELP I'll give you my email and cell # if it's faster

  Thank you very much, I got it fixed by unchecking a file in the tools/Compatibility tab that was causing the problem.

• network 1316.A error error occurred trying to read the file: C:\windows\Installer\KAVKIS.msi

  Try to uninstall Kaspersky Anti-virus 2013.

  Hi William,.

  I understand that you get a 1316 error message when you try to uninstall Kaspersky Antivirus 2013.

  I suggest to refer to the following article and check if it helps.

  Installation/uninstallation of Kaspersky Anti-virus 2013 error: Error 1316. Impossible to install the application

  
  http://support.Kaspersky.com/9600

  Activation error. Activation procedure returned an error 1316

  http://support.Kaspersky.com/4713

  If the problem persists, I suggest you to contact Kaspersky support.

  http://support.Kaspersky.com/

  For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• "Error 1316. A network error occurred trying to read the file C:\WINDOWS\Installer\kis.en.msi"

  Working for days trying to set up my latest software - appears to download from the site OK and runs through the entire installation to the right at the end, then shows code error above.

  I don't have any idea how to solve this problem - many attempts to find a solution/updated via Windows update site fail too miserably.

  Any suggestions gratefully received!

  Has taken a lot of time and a lot of past backward and forward over problem.  Finally I had to remove all the previous editions of the software and perform a clean installation of the new version.

  Now faced with W7 questions!  It will never end...

• Creative cloud error "Unable to extract the files."

  I get an error saying "Unable to extract the files" when I try to install Lightroom CC 2015. I went to/private/tmp and found the installer and tried to run but the installation ends at 0% progress and linked me to a file summary.htm. Files summary.htm has "Requirements", written in it and nothing else. I check my system and I am well above the recommended level. What is my OS? I'm on Mac OS X 10.11.2 while the downloaded file creative cloud is Lightroom 6 LS11, who is old enough.

  Even if we run tool Adobe Cleaner, it will simply remove applications installed, but not Adobe under libraries.

  We have to remove it manually.

  Try the steps marked as a correct answer.

  https://forums.Adobe.com/thread/2010818

• can someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of violeted files

  Ideas:

  • Programs you arecan someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of files violeted the problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  bastyav,
  We use the exact and some error message in more detail on the issue.  This problem occurs with any file on the disk or only some of them?  You are logged as administrator?  Has anything changed recently (hardware or software)?

  The first thing I would say to run a Virus scan and malware.  If you do not have an antivirus program, then you can get one here: http://www.microsoft.com/Security_essentials/

  If there are no problems found then not try the following steps:
  Run the following commands.

  Chkdsk /r

  http://support.Microsoft.com/kb/315265

  sfc/scannow

  http://support.Microsoft.com/kb/310747

  Let us know the results and the information requested.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am trying to format my PC and when the installer loads of my key USB Kingston, he said: Setup cannot copy the file XPtspCom.inf.

  Setup cannot copy the file XPtsp Com.inf

  Hi all!
  I try to format my PC and what configuration is loading my Kingston USB key, said he: Setup cannot copy the file XPtspCom.inf.

  I use Windows XP Professional Edition SP3.
  How do slove this problem please to continue to work with my PC?
  Thanks in advance!

  You should not use these programs, but if you want a USB key to install then you should make an ISO file and then using Unebootin according to me this is a best software to USB for xp and if you have windows 7 installed in one of your system, then you can use tool usb windows 7.