InDesign interactive button CC does not declare all appearing when you export as interactive pdf

Similar Questions

• Just updated to Firefox 29.01 it does not at all. When I opened it that won't load sites that shows just the busy circle floating around forever. It is unusable.

  28 Firefox worked fine, but when asked a pop up opening firefox update to 29.01 I found there was a lot of security issues for 28 so I've manually updated to the 29.01 by going in "subject, check updates, etc." Once downloaded 29.01 and got told to restart, I restarted firefox. When I opened it, I found that it is unusable. It will not open a single Web site. It does not load my homepage. It has all my before Favorites from the Favorites toolbar, but I can't go to anything. I closed and tried to run cc cleaner as I always do, but I get the message "firefox takes too long to close would you like to force a shutdown", but the forced shutdown does not close it no more. I opened the Task Manager to try to close it from there, but firefox does not appear. I don't know what to do. I am all this typing chrome b/c I can't use the latest version of firefox. I've never had this happen before. I also ran in safe mode and it's the same thing. Please help and please answer in simple terms, because I'm not a computer expert. I took a few screenshots I'll join. In fact, I don't see anywhere to attach a picture so I can not. Also, I don't understand the green "add automatically" button which is located under this box on the support page of mozilla. Also, when I went to help, on the page in the upper corner of firefox just now to check the version it says "firefox is updated by another body." That the devil which means? Never seen it ever. Appreciate any help.

  Well, then I can say happily that I'm typing this on firefox yay! I managed to do work, and here's how it is for everyone who is having this problem (well at least this is the solution that finally worked for me). RESTART your computer. NOT simply stop there. It does not work (not for me at least). I rebooted the computer initially there are a few min b/c my was not analysis Norton and I wanted to analyze the new 'new installation' I had to FF. After the computer has been restarted, my norton worked. So I said Hey, maybe I'll give you my FF update 29.0.1 a last try before you install a new firefox, in the hope that maybe restart the computer would have worked. So I opened it and omg he loaded my homepage. It works! In addition, among other first problems I've come across is impossible to bookmark a site. I found the solution. Just go to the upper menu right (it has 3 horizontal lines) and right-click the little star icon that we're used to that means bookmarks. A small menu will appear. Click on "move to the toolbar", and which should put it on the top right of your browser so that you can bookmark things. Hope the tip of restart helps anyone who was having the same problem I was Firefox being unusable! And if you have the bookmark problem, hope it helps you too. Wow. I am so happy that I can finally use FF now! Also, I kept the setting of "no hardware acceleration off the coast." Do not precisely know what that did, but leaving since that works. Oh, one last thing: I closed FF and ran cc cleaner and had NO problem with her telling me that FF would not close. Then restart the computer that solved this way. Yay!

• I have Windows 7 and cannot install PS 11 elements. It does not at all appear in the computer.

  I tried to go and manually from the DVD, but when I try the computer does not detect the DVD.  I get a message saying "insert disk".  Help!  Thank you.

  Your DVD may be damaged.  Download the demo version of l http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm and use your serial number during the installation.

  Make sure you follow the instructions very important before proceeding with the download.

• Why the firefox profile is messed up and does not restore the tabs when you replace the Windows shell with something like bbLean

  I use Windows 8.1 x 64 but I can replace the Explorer bblean shell and when I do that firefox has issues with the profile such that cancel last closed tab or not to restore the tabs at startup.
  I was able to use the replacement of shell of bblean for years in previous versions of Windows, but he always had a weird behavior with firefox. Of course, I am currently in contact with bbLean developers working on the problem, but I would also like to hear what may be the cause of this.
  Thank you in advance.

  @guigs2
  Thanks for responding but I solved it somehow.
  'Replace the shell' means that I have deliberately change value in HKCU NT\CurrentVersion\Winlogon\Shell so it does not point explorer.exe but blackbox.exe.
  After the reset of my installation of windows and get rid of all programs, including firefox now I use firefox portable (not installation of vanilla from the original site) and found, I have no problem with profiles so far.

• Apple Watch does not a Ding noise when you plug in the charger

  Recently my watch Sport Apple stopped making noise "ding" when I connect the charger it. This is happened after I changed the bands and noticed two green lights on the back of the watch as I turn off the watch. I checked the volume on both the watch and the app on my iPhone 6 Plus and they are correct. Has anyone experience this problem?

  Hello

  Try to restart or if it does not help, force the reboot - your watch:

  -Restart: Press and hold the side button until you see the cursor off the power; slide it to turn off; Hold down the side button until you see the logo.

  -Force the reboot: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

• Error "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." when you connect Logitech M225

  Original title:

  My wireless mouse works fine for the last 2 months, now, all of a sudden it doesn't work at all.

  I get a windows notification that says-

  "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it."

  I have Vista 32 bit OS on my laptop.

  My office has Windows 7 32 bit and I am able to use the mouse on this computer, then the M225 is not defective.

  I tried to look for a download of update on the site of Logitech & only found:

  6.32.20 set - point it did nothing to help.

  I also tried to move the receiver to the other 2 ports USB w / still the same results.

  Are there other downloads or solutions that will help w / this problem?

  You can also try searching for devices strangers (with yellow symbols) in the Manager under the mouse devices and other pointing devices and other devices (if any). Right click and uninstall unknown devices. Then restart.

  Also try the steps below to reset the power of USB:
  (a) the laptop off, unplugged from the wall outlet.
  (b) remove the battery for a few minutes, then reinstall it.
  (c) then restart the laptop.

• ColdFusion Launcher does not accept the password when you try to change the web server

  I know this will sound stupid as wrong password is a password wrong, right? Well I swear I know my passwords and it's not having it.

  I am running coldfusion 9 and I want to change the default internal server that I put it to the top with the installation on apache server that ships with mac OS x. So I started the coldfusion launcher and clicked the button Web server connection utility to set up, he asks a password to continue, but usually accept it... I tried both of the passwords that I use for stuff course where I was confused which it requested one, but is not having either.

  I tried to change the password for the coldfusion administrator and still no joy. I know that sounds stupid, but I do not understand... How can I get if she does not accept my admin password... I have tried uninstall and try again once like stuff as it is a nightmare to get rid of my experience... always leaves a file somewhere that you can never seem to isolate who mucks upward following installation so I left it for the moment. Anyone got any ideas?

  OK, you cannot double-click the wsconfig file, cause, then you are not running it as sudo, so you will not be allowed.  'sudo' is 'Super user' and allows you to run a program, temporarily, as a super user.  If you do that you won't have permission to edit the httpd config file.

  Try the following.

  Launch the Terminal

  type: cd/Applications/ColdFusion9/runtime/lib (change the correct path if it is not the path to your ColdFusion)

  Press enter

  type: sudo java-jar wsconfig.jar

  Press enter

  It should ask you for your password. Enter it and press ENTER again.

  It should launch the configuration tool, this time with the appropriate permissions to modify the file httd.conf.

  Good luck

• oci_close does not release the connection when you use DRCP

  Hi all
  
  We are currently testing the deployment of DRCP with 11g. I have the setup of this (to my knowledge), but I am facing a problem. Oci_close call does not seem to release the connection to the pool, because I expect and that is why we see similar behavior as we receive without using the DRCP.
  
  Our facility is using two instances of CCR 11.1.0.6.0 running, I use PHP 5.1.6 with installed from PECL oci8 1.3.4. DRCP pool is configured and launched, each with 100 servers max.
  
  When the Web server is idle, well, it looks like slow motion.
  
  SQL > SELECT INST_ID select, NUM_BUSY_SERVERS OF SGS$ CPOOL_STATS;
  
  INST_ID SELECT NUM_BUSY_SERVERS
  ---------- ----------------
  1 0
  2 0
  
  
  The script is as simple as that:
  
  <? PHP
  $c is oci_pconnect ('scott', 'tiger', 'IWPPOOLED');.
  $s = oci_parse ($c, ' select * from emp');
  $r = oci_execute ($s, OCI_DEFAULT);
  oci_close ($c);
  Sleep (30);
  ? >
  
  What I expected, it's that the script would be to connect to the pool, doing work for a little while and then release the connection for use by other scripts.
  
  But after I point the browser to the script, I get a 30 seconds time of loading (as expected) but the server is busy all the time, like this:
  
  SQL > SELECT INST_ID select, NUM_BUSY_SERVERS OF SGS$ CPOOL_STATS;
  
  INST_ID SELECT NUM_BUSY_SERVERS
  ---------- ----------------
  1 0
  2 1
  
  After 30 seconds of sleep, he is released and busy servers are at 0.
  
  If I load the server with ab using 256 connections:
  
  AB - n 1000000 - c 256 k - http://mywebserver/ocitest.php
  
  the pool is at the maximum and links are at a standstill:
  
  SQL > SELECT INST_ID select, NUM_BUSY_SERVERS OF SGS$ CPOOL_STATS;
  
  INST_ID SELECT NUM_BUSY_SERVERS
  ---------- ----------------
  1 95
  2 95
  
  
  My config this service network is the following:
  IWPPOOLED =
  (DESCRIPTION =
  (LOAD_BALANCE = ON)
  (FAILOVER = ON)
  (ADDRESS = (PROTOCOL = tcp) (HOST = 10.1.16.33)(PORT = 1521))
  (ADDRESS = (PROTOCOL = tcp) (HOST = 10.1.16.34)(PORT = 1521))
  (CONNECT_DATA =
  (SERVICE_NAME = IWP)
  (SERVER = POOLED)
  (FAILOVER_MODE =
  (TYPE = SELECT)
  (METHOD = BASIC)
  (RETRIES = 5)
  (TIME = 3)
  )
  )
  )
  
  The phpinfo() function will look like this:
  Active oci8 support
  Version 1.3.4
  Revision $Revision: $1.269.2.16.2.38.2.20
  Active persistent connections 1
  Active connections 1
  Oracle Instant Client Version 11.1
  Active temporary Lob support
  Support for collections enabled
  
  Directive value local value Master
  OCI8.connection_class IWPAPP IWPAPP
  OCI8.default_prefetch 100 100
  OCI8. Events on the
  OCI8.max_persistent - 1-1
  Off oci8.old_oci_close_semantics
  OCI8.persistent_timeout - 1-1
  OCI8.ping_interval - 1-1
  Off oci8.privileged_connect
  20 20 oci8.statement_cache_size
  
  
  I use the instant client for 11g
  
  Any ideas?
  
  Thank you!
  Michal

  Don't forget to use oci_free_statement ($s); See "Closing Oracle Connections" in the Underground PHP and Oracle manual. (I was just simplify this example today for the next version of the manual).

  You can also see the "dedicated optimization", where a server pooled in a non-maxed-out pool is retained (except if needed by another process PHP) assuming that the initial process of PHP can become active again. See http://www.oracle.com/technology/tech/php/pdf/php-scalability-ha-twp.pdf

  Feel free to email me (see my profile) offline if questions/data that you don't want to display.

  CJ

  Published by: cj2 on October 16, 2008 08:12

• Time Machine does not recognize the backups when you configure the external drive as a network drive

  I have a MyBook 5 to disk with a 1 TB partition that I used as a destination for Time Machine > 1 year now. I recently gathered the energy to connect the my book on my Airport Extreme Base Station (model 2014? the second model) to implement wireless backups. I plugged the MyBook on the base station, set up file sharing in AirPort Utility and created an account with access to the partition of TM on the MyBook under the section 'Sharing secured disk' utility.

  Now, when I open the time Machine, I choose this partition, but it does not seem to recognize that I have a string of backups already there. Then he tries to start a new backup. So a few questions.

  1. Should I abandon my old backups and start over? I don't think that I did nothing to my system in these last days that I would need to be careful, if I couldn't rely on a TM backup from that moment.
  2. Is there a way to get TM to recognize my old backups and start from there? I do not look down the barrel of a backup of time + 13.

  If 1, should I reformat the partition TM in order to start over? I don't see the older backups on disk when I look in the Finder, but I know that they are there and they are too much space. Help/suggestions appreciated!

  Inherit from a backup

  Inherit from a backup (2)

• LaserJet M1212nf ADF does not pick it up when scanning of the Acrobat PDF document

  I recently bought this multifunction machine.  The software installed without any problems.  When you copy, the documents are taken from the ADF correctly, but if I use Adobe Acrobat to scan from the computer in PDF format, it does not appear to recognize the ADF and the scans from the glass.  I have not tried scanning directly from the computer in PDF format.  I could not find anything in the user manual or the HP support that relates to this.  If anyone had the problem and knows how to solve this problem, I would really appreciate it.  Thank you!

  Hi Cathy-IT,

  You should be able to go to the HP scanning application settings to change the DPI setting. It seems that there is a problem with this version of Adobe Acrobat (see link below). You have an older version of Adobe Acrobat, you can test with?

  http://forums.Adobe.com/message/4594637

• Suddenly, IncrediMail does not work properly. When you click on an email that internet Explorer tried to open

  Original title: corruption of the probably the key ".htm" registry is damaged or missing

  Suddenly, IncrediMail does not work properly.  I click on the message and get nowhere.  It seems that it is trying to go to IE and can not find the web page.  I searched everywhere on the internet and saw where others had the same problem, but I can't find the fix.  One person suggested it be referred to Microsoft as a "failed to open local html file with IE' problem."  I guess maybe that's a problem with the registry, but do not know how to fix it.

  I can not even do a system restore or reinstall the IncrediMail program.

  For assistance please ask for help in the IncrediMail Forum

  IncrediMail Support Portal:
  http://www.IncrediMail.com/English/help/choose-your-version.aspx

  Directly in contact with the IncrediMail support team, click here

  Cordially,

• ePrint 7510 does not recognize my iPad when you try to scan from printer iPad.

  The printer and the iPad are connected to the same wireless system. The iPad will print successfully to the 7510 on the wireless system, as well as by e-mail via the website of HP. The printer recognizes and list the computer from apple that was loaded with the drivers that came with the printer for analysis and sends the information scanned to this computer. Because the printer does not recognize my iPad, I tried to load the drivers on the iPad to the HP site. I received an error message saying safari can't down load the drivers. Is it not possible to scan from the printer to the iPad? Is there another procedure that works? Thank you.

  Hello

  To scan from your iPad, install and use the application of HP ePrint home & biz.

  You can initialize the app scan, scan from the front panel of the printer to an iPad is not supported.

  Follow the steps below to get the app:

  http://support.HP.com/us-en/document/c02775166

  And below, you can discover how to analyze to use it:

  http://support.HP.com/us-en/document/c02486319

  Kind regards

  Shlomi

• Firefox loads, icon on the bar of tasks but when you click the slide of graphics off to the right, but does not fill the screen &amp; when you right-click again, falls back into the icon

  Firefox, Thunderbird and Quicken were active when I loadad & ran a slot machine game. When I left the game & click on icon to return to Firefox full screen, I could see the flash of the image to the right of my screen and disappear. When I clicked on the icon in the taskbar, the reverse happened - the image flashed from the right down to the icon. When I hover the mouse over the icon, the open screens appear with the red X to close, but the same thing happens when I click on this box. Two other programs that have been opened, while the game was active work correctly, only Firefox has been affected. I can't open the program to access one of the menu items that I can't get the image of the screen on the monitor. I did uninstall and reinstall a freshly downloaded copy, I had to use IE, as I am now) but with the same results when I run. I did chose to save my settings, so if something has changed here so maybe that's the problem.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• Controller ActiveX does not at all appear

  XP SP3 are installed, Microsoft Update will not start due to no ActiceX controller appears. I have checked all security options, activation/deactivatin Blocker for popups, turned off the firewall. updated IE7 to IE8 and the only difference that was first released with IE8 the ActiveX popup windows start-up, I answered the Q and then nothing has been installed and now the Q appears again. Uninstalled IE8 and IE7 I tried again, no luck, not back to IE8 no action. Frustrated! Have 2 other identical machines and they work fine, please help me.

  These diagnostic pages will help ensure you that your settings of Internet Explorer (version 6.0 or later) are configured properly to see images, run scripts and allow to download and run ActiveX controls.

  Visit: http://www.microsoft.com/genuine/diag/> and click on "start the Diagnostics.

  ~`~

  1. Download this diagnostic tool, save it to your desktop:http://go.microsoft.com/fwlink/?linkid=56062>

  Windows XP: Double-click the executable file to run the tool.

  2. after running the tool, click on the button continue, and then click the copy button (to the Clipboard).

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new thread in the following Microsoft Genuine Advantage forum and paste the results of the diagnosis of MGA tool in your post, and a clear description of your problem:

  http://social.Microsoft.com/forums/en-us/genuinevista/threads>

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

• Z3 sms deletes are after reading or does not at all appear

  Hello. My wifes phone have a very strange condition, I try to explain it:

  After update to Lollipop (months ago I think..), whenever she gets watch phone text message notification, but STOCK sms app doesn't show ALL MESSAGE.

  With Google Hangouts she can open the message ONCE, when she clicks back and contact/message list opens again its GONE.

  I tried e-mail clear cache but no help. Yesterday installed newest 5.1.1 without help. I have same phone (Z3 D6603) without ANY problems myself.

  This is not acceptable!

  Had to first use google sms backup and xperia for rest. It was very weird.