InDesign unpredictable spacing at the top of the text box.

Similar Questions

• Im getting a weird spacing in the text box

  Can not know why on the last line of my body text in a text box, it gives me an additional gap, doesn't happen on the last line.

  Any help would be appreciated. See the example below... .simple and

  delicious sandwiches.   Happens in each text box.

  Thank you

  

  You'll want to turn on the invisible characters so you can see that back, then you should be able to select, and then make the necessary changes, or if you open the control panel with the selected paragraph paragraph Styles you can no doubt see a plus sign after the name of style, which indicates a local override. If most of the text is as defined by the style, you old down the Opt/Alt key and click the style name to remove the replacements, but you don't want to do this if you reformatted it.

• I created a PDF file in InDesign and the text boxes has a white line around one of the text boxes?   There is no color indicated on the sketch? How can I fix it

  I created a PDF file in InDesign and the text boxes has a white line around one of the text boxes?

  There is no color indicated on the sketch? How can I fix it

  Double post.

  Locked

• I can't do anything with the text boxes in my InDesign file.

  I consider myself fairly well with InDesign. But now, I'm quite a. I just spent two hours designing a newsletter before and inside the cover. I filled two text boxes with the text that I stole from a Word file. But now, I can't do anything in the text boxes. I click and nothing happens. Nothing does highlight. The framework is not locked. I don't know what to do. I am little freaked out that InDesign can do this to me.

  Look for the locked layers

  (Menu) object > unlock all on the spread

  Check the Live Page vs Master Page (you could have worked on the master (?)

• CS6 inDesign when the text box is set it is not adapt the text with it

  Hi Adobe community.

  In the past, I have been using Adobe CS5.5 and when you use Indesign I would like to make a text box, text entry and when I need the text box to be narrower, as I'm adjusting the box with the text selection tool would be admissible and move and adjust to fit within the box like you were changing the text box. So, you could see the text as you did the box around it more small.

  Now, I just went to do the same in InDesign CS6 but when move the text box, it simply moves the text and the text moves with it (do not meet with setting the text box), so I'm left guessing where the text will be sitting and it provides a few going until she I understand...

  So what I am asking, is there a box I need check preferences or something in CS6 so that text moves I adjust its bounding box, as it moves in CS5.5?

  Please help because it really bugs me!

  Thank you

  Try to screen Live Edit/Preferences/Interface/design/immediate

• My cursor text overlaps the top of the text box.

  My cursor text overlaps the top of the text box. Don't know how it happened, but can someone help me to get it back in the box?

  You can try to reset the text tool.

• How can I make the label to go on top of the text box?

  How can I make the label to go on top of the text box?
  
  Thanks again,
  Doug

  Set the label of the horizontal / Vertical alignment for the textarea to the aboveproperty.

• Table goes out of alignment in the text box

  I created a very simple table in InDesign CS5 on Windows 7, like this:

  

  However, when you start typing in a cell, it goes like this:

  

  To fix, you make the text bigger or smaller box and then resize it to what it is supposed to be. Also when I do a first page datamerge moves like that too, even if the rest is correct. When you export to PDF it comes out wrong as well. If anyone wants an example file that I can post it here.

  Anyone have any ideas what's causing the alignment change when text is entered into the table?

  Well, I think I see here the rub - if you left me speechless for a while there!

  So, I see that you have the text box that contains your table to help you align your table in the center of your page. (i.e. the box containing the text is organized around the outside of the page and the table is centered lef/right using point centering and up/down by using the command "Center" in the control bar. There is nothing particularly wrong with this method, I think it may be the source of your problems with alignment change unexpectedly.

  Looking at your file, I found that the removal of "Center" and change to the opposite to "align top" took the nervous behavior of the text box. It is more shifted when I tried to type. He however move the entire table to the top of the screen. For now we'll leave it there. Align the Page: Centre from left to right, Center t to b.

  Your final result should be an element that is always perfectly centered on the page, but which can be of type in without any unpredictable jump around!

  Now, we will select the entire area that contains the table. In the paragraph Panel, click "Left aligned". This will move the table to the top left of your document. Now, frame content. Go in the Align Panel.

• Cannot mount the frame to the text box

  Hello!

  I'm in InDesign CS6, on a 2011 iMac, and I often see this problem when I try to make a block of text to its content.

  Initially, it looks like this:

  

  Then I click on "mount the frame to the content" in the menu object, or by double-clicking on the handle at the bottom right of the text box.

  And then I get this thing:

  

  The police is Montserrat (free fonts, you can install it and see how it feels on your side).

  Editing is perfect on the left and right and on the bottom, but there's a margin of 10 pixels between the top of the text and the text box.

  It's really annoying when I try to align the text boxes with objects horizontally, because I then create outlines for text boxes.

  Given that this does not happen always, only with certain fonts, I am led to think that the height of the letters is not correctly calculated within the font file? I'll ask the proponent to the police for help as well, unless there is something like a value of high indentation of the hidden default page that I'm not aware of, or a solution of workaround that someone will report.

  Thank you

  In ID, select the block of text, right-click, and choose Options of text block, then the Baseline Options tab. You can set the first base line on the menu drop-down.

• When I print a table (multiple pages) the text box under the table seems to be moving under the table and prints with the table of this overlap. My only solution is to push the text box further down the page before printing... Any advice?

  Im having problems shaped a text box so that my table does not print right on top of it. I want it inside of my table (it's 'tems and conditions' budget)

  Any advice would be great.

  I face the same problem as well. Would like to know if there is a better way to get the text box to move with the table instead of the effect that overlap. Have to manually adjust the layout, whenever I want to get a reasonable print of a document (or export it to PDF) seems counterintuitive, especially when it causes the document seem ill-disposed on screen.

  I am running version 3.6.2 of the numbers in the case where that matters.

• Table of contents - power of the text box

  Hello

  I recently started using Adobe InDesign and love it! I have a question around the table of contents. At the beginning of each chapter, we have a simple page with a box in it. (each chapter has about 10 pages). The intention is to have the content of the text become the title of the chapter box and have it displayed in the Table of content. The text box itself has several characters of new line in. When I generate the table of contents, InDesign creates several entries in the Table of contents (one per each new line in the text box). So my question is... Is there a way to specify that the content of the entire text box appears as an entry in the Table of contents. (I'd like to update the table of contents by hand to avoid any errors).

  I appreciate any help in this matter.

  Thank you!!

  So, you say that, break forced line and you want that all the rows in the table of contents? I think that I misunderstood.

  If this is the case you're going to the trouble of formatting of the table of contents, as the forced line break will carry you through to the table of contents (you can change the colours using styles or nested GREP and those will not set if you use a different style in the table of contents list itself).

• Automatically convert soft line breaks in the text box to hard breaks

  I have the design of textbooks and convert to ePub recomposable, broke up. These ePub files get formatted then can be used interchangeably on the printed text. A book that I am currently in conversion is a literature book where there are lines of text with the overall line numbers so that teachers can quickly refer to a specific section of the text.

  All the line breaks in the ID file are defined just by the edge of the text box. So the text box change sizes, all line breaks would also change. Isn't a problem until you need to keep these online breeze in recomposable text and add up the numbers in.

  
  What I'm looking for is a way to insert automatically the line breaks in these LONG sections of text in the right places. Does anyone have any ideas on how to do that?

  Thank you!

  Select a text box and run this script. He puts a soft return at the end of each line that doesn't have a carriage return. For more information on the installation and use of this script see http://indesignsecrets.com/how-to-install-a-script-in-indesign-that-you-found-in-a-forum-o r-blog - post.php .

  Written by Skemicle

  If (parseFloat (app.version)<>

  main();

  on the other

  app.doScript (principal, ScriptLanguage.JAVASCRIPT, undefined, UndoModes.ENTIRE_SCRIPT, "add end of line returns");

  main() {} function

  lines of the var = app.selection [0].parentStory.lines;

  for (i = 0; i<>

  If (rows [i] .characters [-1] .silence! = "\r") {}

  lines [i] .characters [-1] .silence = "\n";

  }

  }

  }

• Why my links do not work in the text box next to the e-mail in Outlook?

  I created an email template in Eloqua, which is a two-column layout. The text box on the left has links that work very well. The text box on the right has links that do not work. This only occurs in Outlook. If I find the email in an another e-mail client, all right. What could be wrong causing the links is not working?

  If another person has ever run into this and found a solution, please let me know. I'm pulling my hair out!

  I called support this morning and all I had to do was move the text box on the right side to the top of a few pixels and now everything works fine. I guess when the two tables are the same height, Outlook rides them and cannot process the links properly. I like it when it's an easy solution!

• How to put a distance between the text boxes?

  I have several numbers that I have to be spaced from one line to the other. Is there a tool where I can adjust the distance between the text boxes?

  kaelans,

  For text boxes (Type of path), you can select all, then click on one of them, the Align attribute > spacing distribution, adjustment of the desired distance between the boxes.

• Why I can't Center the text in the text boxes?

  Hello, I recently got muse Adobe and I use it to make a site for my father and he bought a domain already so I use Muse to make the site. I'm a tutorial (this is my first time using Muse) and the user centers the text in the text box beside where the text options in the top menu. I do not have a text align the button, so I can't focus or move the text in this way at all, and I can't put spaces to make them look centered either... Is there something I can do to center text? Any help is appreciated.

  Thanks in advance.

  -Chad

  No problem try Ctrl + Alt + 6 for your control panel and Ctrl + T for your text. If I were you I would get yourself on YouTube and YouTube the donkey of muse, there are plenty of good tutorials that you can follow, not to mention adobe TV / tutorials.

  If you need more help or advice, do not hesitate. Its also a good idea to add images when you try to explain a problem. If you succeed in adding your text editor and Control Panel, it should look like this?

  

  Concerning

  Shane