Indicating the type of incorrect disc?

Similar Questions

• How to change the type of insurance policy indicator on front panel

  Hello

  I want to change the type of digital indicator police led style. I have the police. But, how can I change the type of indicator of independent policy and not only not by changing the type of policy application. I checked the property node available are only color, size, justification, but type.

  Yoppy.

  Go

   

  LED > right mouse click > Create > property Node > Label > police > name

   

  then use (or)

   

  Digital > right mouse click > Create > property Node > digital text > police > name

  Kind regards.

   

• My PIXMA MG5320 has error U052-' the type of print head is incorrect. Install the correct print head

  My printer has stopped between different documents with the printing error U052.  He has said, "the type of print head is incorrect.  Install the correct print head. "I couldn't find help on the support page.  A YouTube video showed me how to get out of the print head and clean it manually.  I did this and reinstalled my ink cartridges.  I still have the error.  I can't align my printhead.  Buy a new print head or I have to buy a new printer?  I love this printer!  He is a year old.

  Hi Brooks14,

  If your printer was purchased less than a year, we will be able to replace it under warranty without having to buy a new.  Since you've already tried it replace unsuccessfully, I recommend to use the link contact us to contact our support staff that can go through your warranty options

• C5180 tells me that paper is the right size or type is incorrect.

  I have a photosmart c5180 all in one. I started having an error message, the incompatibility of paper. size of paper or type is incorrect. I used the same paper in the same place for years. I did everything I know how to fix.

  Any suggestions?

  Normally, it is thanks to sensors of paper in the paper from the printer tray. If the paper sensors are dirty, damaged or blocked, then the printer will display a paper or paper Mismatch message.

  There is a document in paper Mismatch questions located here.

  Let me know how it goes.

• "BOOTMGR is missing press ctrl + alt + del to restart" with this disc with recovery vista on it, but it still does not work. It could be the type of disc or something! NEED HELP PLEASE!

  Hello

  Just the message keeps coming and coming. so I did what all seemed to be telling me to do, I downloaded this 'Windows Vista 32 - Bit (x 86) Torrent recovery disk' on a disk and put it in my computer, restarted and is come up with the same message, I thought I might need it again. So I did, Bam, same message. It might be the disk or something as I said, but I don't know! Its really annoying me now, please help!

  Oh and I do not computer language can you please make it simple for me...

  Thank you!!

  Here is the download of recovery for Vista instead of Windows7 drive: http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/.  The thing is, I'm not sure you can use this drive for a boot recovery - you need an Installation of Vista disc.

  If you can get your hands on an Installation of Windows Vista genuine disc, then here are some procedures to fix the BOOTMGR missing (you can try repair system with the Neosmart disk but honestly, I don't think that will work - you need to do the other procedure):

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  ·        Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not resolve the problem, try the following:

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click command prompt.

  7. type Bootrec.exe, and then press ENTER.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  ·        bcdedit/export C:\BCD_Backup

  ·        c:

  ·        Boot CD

  ·        BCD attrib s h - r

  ·        Ren c:\boot\bcd BCD.old

  ·        Bootrec /RebuildBcd

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Whenever I run Firefox, it appears an error message indicating "Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist." Contact the author to this problem. »

  Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist. Contact the author to this problem.

  The above statement is in the box pop up error every time, when I run Firefox. If I click on ok in the box of Firefox opens. How can I solve this problem of initialization/launch?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  
  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
  
  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

• What is the custom property that determine the Type of disc Provisoning?

  Hello

  I wonder what would be the custom property that determines the type of disk configuration during the construction of the virtual machine. I had noticed, VMS that are cloned with VM model with thin provisoning get the drive put in service end however if one adds the additional drive for the virtual machine of the vCAC, they get set up as 'Thick lazy disposition to zero' which I don't want but I wanted this type of control.

  I'm sure there should be value for the same property portfolio, but I am not able to find, someone used or?

  BR,

  MG

  VirtualMachine.Admin.ThinProvision = true / false

• How do you get the type of incoming IMAP to POP3 server?

  Recently, after getting a laptop with Windows 7, my Thunderbird account stopped to let me see or send emails. I contacted my small ISP and talked with them. One change was that the address I had for their server was no longer used and now the server type is incorrect on behalf of TB: it was IMAP, but should be POP3. I have to go to a reading of general E-mail site to find my incoming emails. I can't find a way to change the IMAP POP3 Protocol, so need your help.

  Configure the account again. When it gets to a point where it shows you the IMAP settings, it can show you boxes to choose between POP and IMAP. If so, select pop. If this is not the case, select manual Config and enter the settings provided by your email provider.

  What reason is provider makes for POPS are correct and incorrect IMAP? If you have run the auto-set-up and Thunderbird discovered an IMAP server, then they of course offer IMAP service, so it is difficult to see why its use is 'bad '.

  Provider who is?

• type is incorrect and is worsererer

  Take a look at your iTunes library and particularly to the column TYPE for music 9i just have music on in my itunes)

  Crawling in East entered incorrect "gender." That is to say a torn mp3 is seen/listed as a purchased AAC file.

  You see it too?

  I do not Match, use iCloud.

  12.3.2 iTunes

  10.10.5 OSX

  Take a look at your iTunes library and especially in the TYPE column for the music (I don't have music on my iTunes)

  Crawling are casual (dozens, if not more) entries incorrect "gender." That is to say a torn mp3 is seen/listed as a purchased AAC file.

  You see it too?

  I do not Match, use iCloud.

  12.3.2 iTunes

  10.10.5 OSX

  He is no longer a preview button so I reposted, correct the faults of strike. If there is a preview button, it is proposed that, if she did not move I have not see it.

• OfficeJet Pro 8500 has more: format of paper PAPER MISMATCH or type is incorrect message

  When I try to print a regular 8 1/2 x 11 paper, I get an error message that says "paper mismatch: paper size or type is incorrect." What happened recently power, and sometimes I couldn't the printer to print if I power off (reset) completely and/or rebooted my laptop, or if I deleted the printer in the preferences system and then he readded.  But now, not even these solutions are effective and I get the error message.  I followed the following steps: http://support.hp.com/us-en/document/c01824353 and had no luck.

  If I could just replace the message, it would be a cure, because everything that I never print is 8 1/2 x 11.

  I am not sure, but it may have started to happen after I upgraded my laptop 10.9.5.

  Anyway, if I could dare ask you to respond very clearly and in a sort of step by step of passage. I'm a Baby Boomer, so it is not intuitive for me, thank you in advance to give me very simple instructions!

  Hello

  Please try the procedure on the fron printer below Panel.

  1. Press SETUP, then
  2. Touch TOOLS, then
  3. Touch RESTORE to the FACTORY DEFAULT

  Now try printing.

• Pavilion g6-2306el: problems with the recovery DVD-R discs

  Hello, it's only now that I saw that the DVD + R is suggested for all recovery discs burning. A little too late for me, since I bought several DVD-R to produce my game. Here is what happened: each disk has been created with difficulty; the burning process failed on all the others try. But in the end, I finally got the DVD-R 4 program have been burned and verified correctly. Now, when I tried to insert each disk to make sure that the laptop was able to read properly (the content supposed to be confirmed, after all), to my horror, I realized the first two discs were not being recognized. However, my patience was rewarded when, after a long time, suddenly, an Explorer window showing the contents of the disc. Taking advantage of the situation, I immediately copied this content in a folder on the desktop. It took me a long time to do this process for the content of the first two discs that had recognized problems. Subsequently I also copied the contents of the discs 3 and 4, which was much faster. Now, I have four folders with the corresponding content of the recovery disks in the office. The question is: can I use these content and burn on DVD + R this time, in order to have a working set of recovery disks? Thank you very much.

  Hi @anthony_s

  Thank you for your query.

  I understand that you have created your recovery on the wrong type of DVD disc and does not work.  You have copied the contents of folders on the desktop you and want to know if you can now create new recovery DVD on the appropriate type of files.

  No, it will not work.  I suggest that you contact HP support and inform about events and inquire about obtaining a recovery kit.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  I found this link on the HP forum, that you can read, I don't know if it works or not. Please let me know if it is successful.

  This is how to do a 2nd set of recovery disks.

  Good luck!

• In the attached VI why looping force the type of data while the other does not?

  In the attached VI why looping force the type of data while the other does not?

  I'm guessing that you have created the Enum on the front panel.  If you right click and create an indicator, it corresponds to the type and be an enum.  LabVIEW represents enums as U16, but because the types are not the same (for example, your enum has 3 values, but a U16's 65 536 values), LabVIEW automatically converts value (or converts) the smallest representation (enum) in the largest value (U16).

• How can I determine the type of image to be used before loading an image?

  I'm developing an application using VB 2005 which measures two 8-bit or 16-bit image files. When I saw the picture, I find that I have to set the type of image the image buffer before playback of the image in it. For example, if I read a 16-bit image in a buffer of 8 bits, the image is truncated. I guess I could read the image in a 16-bit buffer and retype it if the pixel values are less than 255.

  Is there a better way to do it? Can I determine the number of bits of an image before loading in a buffer?

  Thank you!

  Hi Steverino,

  Olivia is incorrect... VDM has a function called GetFileInfo which does just what you want. It only reads the header of the image but does not load the entire image in memory. It will give you various properties such as the bit depth.

  I think that on the new .NET support, there can exist here: NationalInstruments.Vision.Analysis.Algorithms.GetFileInformation.

  Thanks to the ICB and our legacy of .NET support, it's probably a similar name.

  Eric

• How to set the type default XControl 'control '?

  Hi all

  LabVIEW 2009 + DSC

  How can I configure the type default XControl be 'control '? For example when I drag and drop the Xcontrol VI project is always kind of indicator, and I want it to be a control. Of course I can change it manually after a fall, but when there are many XControls that takes time.

  BR, Jim

  In the façade VI you can get the "change management event" uses the following code to be an "indicator only.

  

  The same code can be used in the init State.

  Tone

• Checking file system on C: the Type of file is NTFS. The Volume is dirty. -What this means and how do I clean the Volume, please? My computer is Dell XPS

  Recently, when I turn on my computer is starts, guests of the computer and starts check my system files as follows: "checking file system on C: the Type of the file is NTFS. The Volume is dirty. "That is what this means and how can I clean and maintain the clean Volume, please? My computer is Dell XPS

  The computer system continues and invite "CHKDSK checks the files (step 1 of 3)... .

  The system deletes some files and at the end of shows, complete audit files and then show

  CHLDSK is verifying indexes (stage 2 of 3)...

  Once again, it shows the following:

  Deleting Index Entry _64280 ~ 1. jpg in index file 4632 $130

  Deleting Index Entry _64280552_little-mix_211112_get [1] .jpg in index file 4632 $130

  Deleting Index Entry 69gw [1] .jpg in index file 6722 $130

  Remove entries of Index 69 GW_1 ~ 1. jpg in index file 6722 $130

  Deleting Index Entry _64274754_messi_211112_elvis [1] .jpg in index file 6722 $130

  Deleting entry Index _64274 ~ 1. jpg in index file 6722 $130

  Finished the index checking

  CHKDSK is checking security descriptors (stage 3 of 3)...

  100%

  CHKDSK checks usn Journal...

  Windows control disc is finished.

  After all checks, Windows proceed to start as usual.

  I would like to know if I need the dirty Volume, and if so, how can I carry out the cleaning operation.

  Sometimes, at the early stage of the CHKDSK, the computer makes a pe. .. PE... noise and cut.  Then I turn the computer off via the key of the insulation. When I restart the computer, it then runs the check again until the end.

  Please advice me on the following points:

  1 is this normal as he started only happening in recent weeks?

  2. How can clean the Volume in order to show "Volume is clean instead of sale"

  I look forward to hear from you.

  Thank you

  Hi, Dr.,

  Volumes that contain file system errors are known as Sales. To indicate that a file system problem has occurred and that the volume is dirty, Windows XP Professional displays a message similar to the following when you try to open, delete, or rename a file or folder by using Microsoft Windows Explorer or the command prompt:

  Autochk runs if the volume is marked as modified.

  If the file system has marked the volume as dirty, Autochk runs the Startup Repair process. Volumes are marked as dirty, when the file system detects an error on the volume. If Autochk detects a dirty volume, it provides a delay of 10 seconds, and then starts the repair process. If you cancel Autochk when a volume is dirty, Autochk tries to run again after a 10 second delay every time the computer is restarted.

  See Chkdsk for all the necessary explanations:

  http://TechNet.Microsoft.com/en-us/library/bb457122.aspx

  Run the Dell Diagnostics to check the drive failure.  If the disc is a failure, it must be replaced.