type is incorrect and is worsererer

Similar Questions

• OfficeJet Pro 8500 has more: format of paper PAPER MISMATCH or type is incorrect message

  When I try to print a regular 8 1/2 x 11 paper, I get an error message that says "paper mismatch: paper size or type is incorrect." What happened recently power, and sometimes I couldn't the printer to print if I power off (reset) completely and/or rebooted my laptop, or if I deleted the printer in the preferences system and then he readded.  But now, not even these solutions are effective and I get the error message.  I followed the following steps: http://support.hp.com/us-en/document/c01824353 and had no luck.

  If I could just replace the message, it would be a cure, because everything that I never print is 8 1/2 x 11.

  I am not sure, but it may have started to happen after I upgraded my laptop 10.9.5.

  Anyway, if I could dare ask you to respond very clearly and in a sort of step by step of passage. I'm a Baby Boomer, so it is not intuitive for me, thank you in advance to give me very simple instructions!

  Hello

  Please try the procedure on the fron printer below Panel.

  1. Press SETUP, then
  2. Touch TOOLS, then
  3. Touch RESTORE to the FACTORY DEFAULT

  Now try printing.

• Assign information types to books and pages

  Hello

  I use Robohelp 7 HTML and am trying to assign information types to books and pages. The types of information are defined, but I have no way of assigning them to books and topics. All my categories are marked as "inclusive".

  The file Adobe Hep says that:

  1. Click view > pods > list of topics. The list of topics is displayed.

  2. In the list of topics, select the topic.

  3. Click on properties.

  4. Click the Types of information...

  There is no such label.

  What I am doing wrong? Can someone please

  Hello

  You do not have something wrong. What you have done, it is falling on a feature of HTML help that was never properly and fully implemented. I've had a play with the Types of information in 2000 and concluded that they were not worth the effort.

  On the one hand, they are far from intuitive for end users. An end user must know they exist, then with the right button of the table of contents and choose to sort the table of contents for the Information Type (or types) that are available.

  If you choose to continue with the Types of information, I believe that the process you follow is to create types. Looks like you got that far. In the table of contents you click then the books and Pages, then look at the properties. On the dialog box that follows, you click on the Advanced tab and check the option of the Types of information that can be used. Then, you assign types by clicking on the button Add... down.

  As the types of information are used only with the table of contents, it is not surprising, there is nothing in properties to deal with them. In addition, they don't apply to the CHM format and are totally moot if your output is WebHelp or FlashHelp.

  My best advice would be to suggest Adobe there is incorrect information in the help. I will do this with the comment that you posted in the help topic. I just opened RoboHelp X 5 and even as far as X 5 there is no information Types tab in the properties of the section.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 days - $24.95! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• If I type 'Erase content and settings' from my iphone 6, will be that all deleted texts be permanately deleted?

  If I type 'Erase content and settings' from my iphone 6, will be that all deleted texts be permanately deleted?

  Yes.

• When I type, or copy and paste a URL in an e-mail message, how can I keep just like a URL and there not create this image with embedded links?

  My question pretty well describes the problem.

  I found a work around. 1 type any letter and then immediately following the letter (without space), type the URL or paste a URL address, and then remove the main letter.

• I have Apple TV gen 1. I changed my iTunes password and now I can't the Apple TV in the House. It will connect to iTunes. I type my Apple and a new password. My phone Gets a text with a verification code, but the Apple TV says wrong user

  I have Apple TV gen 1. I changed my iTunes password and now I can't the Apple TV in the House. It will connect to iTunes. I type my Apple and a new password. My phone Gets a text with a verification code, but the Apple TVsaybadusername password or.

  Your ATV1 has an old software system not updated for years.  You have 2 factor (6 digits) or authorization of step 2 (4 digits) enabled for your Apple account.  Here are the characteristics of the latter.  I disable these on your Apple account and try again.

  For Apple ID - Apple Support two-factor authentication

  Frequently asked questions about the audit in two steps for Apple ID - Apple Support

• I see a different type of shortcuts and desktop.in satellite A100 - 784 PSAANE

  Hi people,

  I have the Satellite A100-784 PSAANE series... with windows Visa basic home edition...
  For the last 10 days or so I don't know, but I see a different type of shortcuts and the desktop.ini files all over the PC!

  I don't understant that...
  There was some new files in existence to which I do not have access! Some shortcuts came over some of my hidden files are out!

  I mean they are seen hidden at all and as recycler or something!
  I don't know what happened... I find the file desktop.ini anywhere...

  Please if anyone knows what happened please answer...

  Thank you very much..

  I hope that my laptop is not crazy!
  Kind regards
  Perkins

  Don t be angry with me, but who needs to know what you did on your laptop?

  Maybe you have something has changed accidentally or installed any 3rd party applications that could have a bad influence on the settings of Vista (Yes, that is possible) or you get any Virus or malware.

  You may be able to see the hidden files and system, because this option has been activated.
  So, try to activate the hide option in the folder options.

  Or you'll flip the BONE to the beginning!

• Motherboard model H535 failure - the type of machine and the serial number invalid after replacement

  Does anyone know how to set the new Type of Machine and the serial number after a motherboard for a replacement model H535?

  The motherboard has recently failed on my model H535 (7 months after the expiration of the warranty - thanks, Lenovo). No local garage would agree to replace due to its nature of owners (thanks, Lenovo). I spent about four hours on the phone being bounced into back-and-forth between the many support staff (usually combined) Lenovo in sales, technical support, support of parts of IBM and various other departments (thanks, Lenovo), which one has suggested that I might have to try to find a motherboard on Ebay or Amazon for my computer in less-than-2-year-old. However, I finally get to someone at Lenovo, which has been able to sell a motherboard - for 2/3 of the cost of the original computer.

  Now, I installed the motherboard, and it works. However, during each boot, I get a POST with two beeps error which reads as follows:

  00CE error: Machine Type and serial number is INVALID

  Start of manufacturing sequence is taken if no selection is made

  I presume that the BIOS on the new motherboard must be programmed with the right Type of Machine and the serial number of my computer. I've read various things on the Internet about what to do, as updating the BIOS (I can not even find a BIOS under "downloads" of support for the H535 - thanks, Lenovo model), using WinPhlash (I apparently need one kind of BIOS ROM file to make it work, I don't have), getting a Lenovo hardware maintenance disk for my model (which apparently isn't available for other special people only me - thanks Lenovo), etc.

  The waiting time for Lenovo support are ridiculously long, and almost every customer support person is ridiculously uninformed on the difference between one of their computer models, and even less their motherboards (thanks, Lenovo). I am amazed and extremely frustrated. It shouldn't be rocket science.

  On a side note, I initially bought the computer from Staples with a credit card with extended warranty protection, which means I can get a refund for repair. Although the motherboard came with a packing list, no Bill has been provided by Lenovo, and I couldn't make them send one - or maybe even with success to explain what a Bill is (thanks, Lenovo).

  Well, Lenovo support was useless, and any alleged authorized suppliers were in fact still suppliers or could help with my problem. But I was finally able to fix it myself. Once I found the right piece of software, it has been fixed in less than a minute.

  My BIOS is by American Megatrends, and I discovered that they have a set of utilities that includes a called AMIDEDOS. It is intended for manufacturers to be able to change the strings of text stored in the BIOS for things like the manufacturer, product name, Version, number series, UUID, SKU number, family, etc., that is what I had to do. It is not intended for use by consumers, but it's there.

  When I ran the "DMIEdit.exe" program AMIDEDOS (clicked and ran as administrator from 10 Windows) and click on "System information" from the list, I saw "Product Name | STRING | Invalid' and ' serial number | STRING | NOT VALID ". The other fields appeared to have valid entries. I double-clicked on the fields valid and changed their "H535 model" and the serial number of my computer, respectively and then clicked on "Update all" at the top.

  Much to my surprise, he reported that he had successfully registered the new information. And, perhaps even more surprising is the fact that, when I rebooted, the double beep and the warning about the type of computer not valid and serial number have disappeared. In addition, the BIOS showed I had entered the new values, and the 'Manufacturing Boot Sequence' option (I understand can be much slower than a normal boot) had disappeared.

  Again, I'm a little surprised simple it was actually solve the problem once I got the correct software, or Lenovo part nor American Megatrends apparently offers to the owners, and it took hours and hours of research and research to understand. Use this information at your own risk, however, as playing with BIOS apparently can lead to problems not easily solved. That said, the modification of these text strings seems relatively safe.

  I will mention that I also ended up changing the method of "LEGACY" to "UEFI" boot in the BIOS after noticing that the selection.

• read the type of variable and the value of LabView

  With the help of the TS. Class sequence that I try to get the type of variable and the values of local variables, parameter, fileglobal and stationglobal. Unfortunately I'm not able to find the right function. Hope someone can help me.

  Kind regards

  Lars

  Hello

  Maybe this simple TestStand example will help you.

  The API calls for LabView are the same...

  Hope that helps

  Jürgen

• Why the 2011 State reg Highway parameters are incorrect and to run the installation program - does not work

  Highway 2011 inserted from the original disc. Indicates that the registry files have been copied incorrectly and that the installation must be executed again from the original source.

  Disc reinserted after repair, yet no different, remove program and reinsert and the message reappears. The program was OK when it is used first on 24/10/11

  and the fault appeared later that no other programs have been added since. Thank you

  Hello

  ·         What operating system do you use?

  ·         Were there recent changes made on the computer before the show?

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Error message when you install a Microsoft game or a mapping program

  http://support.Microsoft.com/kb/258496

  Also, try to contact the highway help and support site and check if it helps.

  http://www.Microsoft.com/UK/Autoroute/support.aspx

• just want to type a letter and print - where should I start?

  I just want to type a letter and print it.  Where should I start?

  Start | All programs | Accessories | WordPad.

• How can I find out what type of ram and the maximum amount that I can add to my: xp professional 32-bit PC?

  How can I find out what type of ram and the amount, maximum I can add to my: xp professional 32-bit PC?

  Thanks, GregCY

  Original title: RAM

  Fastest and easiest is to go to http://www.crucial.com/systemscanner/ and download and use the scanner.

• When I'm signed Windows Live, my screen shows two lines and when I type my name and password I can't see them.

  When I sign live Windows my screen only showed when I type my name and passoword and lines I can't see them, and yet it opens to my email. What happens and how can I fix.  Also on some Microsoft sites, I can also not read the page it is blanck and only a few show blue lines but no words. Help I know not if I maybe downloaded somethng but need to read websites and I can't.  I went on the essential Microsoft website to download and I can see a picture but no words.

  Hi Marlene,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• my keyboard strokes are not made, unless you type very slowly and hold down the key until the particular letter is displayed

  my keyboard strokes are not made, unless you type very slowly and hold down the key until the particular letter is displayed

  Hi Kdooley,

  Are a. When you facing this problem?

  B. using a laptop or a desktop computer?

  C. is - what happens with specific applications?

  D. don't you plug a different keyboard to check?

  Method 1

  I suggest you to connect this keyboard on another computer and see if it even. If the problem persists, try Method 2

  Method 2

  Try to change the rate of repeat on the keyboard and check if it helps.

  1. Open keyboard by clicking the Start button, clicking on Control Panel, hardware and sound, tap keyboard.
  2. Under character repeat, move the repeat rate slider to the left to keyboard characters repeat more slowly, or to the right to make them repeat faster.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-keyboard-settings

  If the problem persists, then it might be a problem with the keyboard itself.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• C5180 tells me that paper is the right size or type is incorrect.

  I have a photosmart c5180 all in one. I started having an error message, the incompatibility of paper. size of paper or type is incorrect. I used the same paper in the same place for years. I did everything I know how to fix.

  Any suggestions?

  Normally, it is thanks to sensors of paper in the paper from the printer tray. If the paper sensors are dirty, damaged or blocked, then the printer will display a paper or paper Mismatch message.

  There is a document in paper Mismatch questions located here.

  Let me know how it goes.