Indicator slide U-shaped pointer

Similar Questions

• Satellite L650 - 10 d - sound crackling and shaped point on screen

  I have a L650 - 10 d, bought about 1 month ago.

  1. I have a problem, whenever I listen to music, play games, watch movies my his gal (emits a crackling sound) once every 20 to 40 seconds.

  I reinstalled windows, I installed the latest drivers, I did all the up-to-date windows... always the same results.

  Is there a fix for this, or I have to go pay.

  2. a the lower left corner of the screen, I also have a dowry, which can be seen on light colors, especially on white irregular. The image has a greater brightness in this area. I've never touched the screen never done anything bad... This is how I got out of the box. But I realized after a few days, because you can see only on colors near white...

  This can be corrected? or I have to repay my laptop?

  > 1. I have this problem, whenever I listen to music, play games, watch movies my his gal (emits a crackling sound) once every 20 to 40 seconds

  I had the same problem with sound crackling who disappeared after a display driver (not Toshiba but the provider's site. However, it is recommended as the site of the driver provider is not a protection against overheating). In this forum, I read that the bios can solve this problem but attention update of the bios.

  > Can it be fixed? or I have to repay my laptop?

  If mentioned above could not resolve, contact the service center. We will wait for the other user will offer...

• Attribute points to the quiz slides using Pools of issue Manager

  Is it possible to assign the points must be reported to a slide when you use Pools of issue Manager?

  If a slide, for example, has 10 points, and another slide is 5 points, when they are both added to a question pool, make loose them their initial number of points and get assigned some number of points chosen when a random slide is added to the pool?

  I hope someone can clarify. Thank you.

  I just checked in Captivate 5 and it seems that the notation is associated to the Question pool, not inserted at random Question slide slide.

  If you are trying to achieve a result where the difficulty of the question has equaled the number of points awarded for doing things, you may need to put in place a number of question pools.  For example a pool of easy questions, another of medium difficulty and a third for really difficult.  Assign points 1 or 2 by default to the easiest, perhaps 5 for medium and 10 points for the hardest.

  That's what I do in fact.

• Second the mouse pointer to the center of the screen of Windows 8 (office and metro) - Sony VaioT Ultrabook

  After a few updates MSFT uncontrolled or without reason, the boot of Win8 poster now the gray circle or circle with the mouse pointer in the Center on the login screen of the touch screen. Try moving the pointer with touchpad shows second pointer, and the original remains flashing in the Center. By connecting to the Metro interface, the cursor of the Center remains in the Center, and it is possible to move subway tiles by dragging the screen.

  When you go to the office, the pointer to the Center rest sometimes, sometimes disappears; When there, open and close the Task Manager without doing anything he removes the unwanted pointer. When removing the additional pointer in the Center, office does not respond to tap and double tap. and does not show the rectangle of the area of selection, as he usually did. However, the touch screen digitizer apparently works as the key, and touch multi-touch show shadows in the points of contact. It also allows to scroll the text in the browsers to slide the touch screen. But the zoom and the valves do not work.
  I also noticed that a few seconds after that the Office will appear on the screen, the touchscreen works as he used before (look and work area selection), but they stop working after 3-4 seconds and you can only take account of the points of contact and scroll the text in browsers (no resizing)...
  Device Manager displays the digitizer as 'USB input device' USB\VID_04F3 & PID_0018; It is impossible to find the name of the vendor or update the driver. The device also creates objects of device HID four children. The digitizer can be stopped and restarted from the Device Manager; upon restart, the Center pointer appears again, or a white square is displayed. Touch the place goes the arrow-shaped pointer in the gray circle of key indicator in the center of the screen. Open and close the Task Manager remove the pointer from the Center.
  Sometimes, when you move a pointer 'true' with the touchpad as the arrow in the Center pointer is replaced by a helping hand or cheek two arrows.
  It seems that there is an application or a service that loads with office and seizes 'touch down' messages, do not let them be served by gui. However, I don't find anything unusual in starting programs or services; Virus scan shows that the machine is clean.
  I thought it might be a ClassicShell likely to interfere, but removing it does not change the behavior. Neither the removal of all the utilities of the startup list startup.
  It is a software problem, suggestions, which could bring him or how to find the root cause of the problem are appreciated.
  I saw a similar description of the behavior on the forums of Sony, but there was no resolution.

  FIXED! My laptop had this problem from day one.  I found a thread where some people had fixed it by going into the properties of the mouse and two enabling paths (shortest path setting was OK and barely perceptible) or by changing the standard display cursor to enlarged (or black).  But this does NOT work for me.  Here's what worked completely:

  I turned off the touch screen.  Who needs him--it was a stupid idea of Windows 8, in any case, and the compromise to solve this question "cursor ghost" was worth WAY.

  Go to Device Manager.  Under Interface devices, there are 2 lines for input USB device.  (If there is more, temporarily disconnect the receiver wireless mouse or another USB input device).  Disable the first, one in right-clicked on it and selecting Disable.  And the problem is GONE!  I hope this helps.

  Maybe the screen had a defect that makes act like an invisible finger relying on, or more likely, it's a Windows 8 bug affecting some machines.  In any case, it's a huge relief to see it fixed, because the cell phone was horrible, when this happened.  Good luck!

• iTunes store pointer problems

  I use iTunes on a PC x 64 Win10. The iTunes Store is normal except for the movies section. The mouse pointer is not aligned with his actions. The pointer appears several inches upward and to the right of the 'click' action takes place. I've updated to the latest version of iTunes, video drivers, Win10 and Logitech mouse software software. The store displays / reacts normally until I go to the movies section, and then the mouse pointer simply does not work properly. I can move the pointer on the screen and see film selections "light up" out of one side of the pointer and can select a movie to rent or buy, but it's all or nothing and I can't use the slider bars or points click on the right side of the screen to store. The app store on my iPhone 6 works as advertised. Any suggestions?

  Make sure all Windows fonts scaling of the display option are set to 100%.

  In iTunes in Edition > Preferences > advanced press reset the Cache.

  TT2

• Programmatically add or remove slider

  Hello

  I use slide System Horizontal pointer.

  

  And I want to add the slider programmatically. I know how to add this manual, but I want to add/remove the cursors programmatically.

  

  Could you please help me?

  
  

• change of the indicator with time using the structure of the event

  Hi all

  I use a structure within the meaning of the event to change the State of an indicator. At this point, I was wondering is there a way I can monitor this change of State in a time interval?

  Which means that how I can raise the event only when the state change is long enough (for example 5 seconds), if there is a change of State, but the State eventually back to normal (less than 5 seconds), the event is not triggered.

  Thank you and hope someone can give me some advice on how to do this?

  Sorry for this reading does not completely. Here's a version that works and not stuck to wait.

• Change background string indicator when color in short

  Hi, I know how I can change the background color for an indicator of string by using the Text.BGColor property.

  My question is how can I change this only when the indicator is at the point, I mean when the cursor is in this area.

  As soon as the cursor will move to another indicator of the chain, I would color to follow the cursor so to speak.

  1 go to give this idea a Kudos: key Event discussion

  2. you could do something like this in a loop

  

• Disable the Caps/Num Lock Indicator

  So I have this REALLY annoying indicator and I cannot figure out how to turn off. He appeared just today after my keyboard locked out of the blue. I have not installed new drivers in more than a week or 2. It is also on a desktop computer assembled by hand with no preinstalled software.

  

  I don't know what is. I use a Logitech G19 keyboard with 8.50 drivers LGS and I see no indicator in its parameters (point set is not installed or is - it a process). The control panel is out of no help as its parameters of immobilized the Num Key for 5 seconds does not work and also the neutralization of him does not.

  Hi, elegant,

  To the left of the keyboard above the SHIFT key, press Caps Lock.  This should stop the message.

  Search troubleshooting links here

  1. Press Start > Control Panel > access > easy access Center > make the keyboard easier to use
  2. Make sure turn on toggle keys is not checked

  Disable the popup lock and num caps

  Start, type Regedit

  Navigate to the following key

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control

  Double-click on "Keyboard" to open the folder.

  Open the "Edit" menu and choose "New" then "binary value".

  A new file will appear to the right of your screen with the name of the file highlighted.

  Type 'Scancode Map' for the new file name.

  Double-click to open type in "00000000 00000000 0200000000 003A 00 00000000" in the value data box.

  Press the OK"" button.

  Close the editor of 'register' by selecting 'Quit' in the menu 'file '.

  Restart your computer so that the change takes effect and enjoy life without the SHIFT key.
  -ehow-

• How to stop a slide pause button?

  Hi, I use CP 9 on Windows 10.

  I'm 9 Essential Training on Lynda Captivate, and the teacher showed me how to use a form as a button to enable / disable subtitles.

  However, the shape is a pause the slide at some point, as you can see in the screenshot.

  (I can see from the video that the guardian is having exactly the same problem, but it does not it)

  How can I stop the pause button slide? I just want that he be sitting there for the entire project.

  Thank you very much!

  

  Will not start ranting about the lack of comprehensiveness/good practice courses for Lynda.com Captivate (I like and I use it all the time, for other applications such as Photoshop, Illustrator, Audition,). The essential to know is the chronology (in basic training I always spend at least half a day for this feature), and you won't find much about it in training. For me, it's basic training!

  Go to the properties panel for this form button and turn off stopping there.

  I see you are using this form to a normal slide button. Why not put on the master slide main if you want for the whole project? Let me also indicate that your form is a break at 7 seconds, preventing several images to appear. The button will disappear at about 13, 5seconds, which means that the user will no longer have the ability to enable/disable CC? Longer life for the rest of the slide (CTRL-E).

  I am planning a new version of this old article to deal with the new deadlines of built-in effects, but maybe you'll find some ideas anyway:

  Small timeline Tidbits - Captivate blog

  Take a look at this tutorial where I describe the use of a shared action and States for several buttons to toggle:

  1 share = 5 buttons toggle - Captivate blog

• Work of slides, but preview/publish does not

  I have a project with 36 blades. Each slide works / playing as an individual slide. Captivate project created a PPT.

  When I saw the craps on slide 9 project (crashes) or publish (goes black and stops).

  Slide 9 parameters are like 8.

  Problems with all the blades after 8 and before a demo of the software. The demo works.

  I use Captivate 8 on Windows 7.

  Any thoughts with these details as to what is happening?

  There is a reason for this behavior.  Your job is to find using a process of elimination.

  Start hiding slides and republication to locate that slide (when hidden) must contain the number.  If hide all the slides at one point still does not eliminate the problem, then try to remove or deactivate Variables and advanced Actions.  Sometimes their name can be at the origin of the conflict, or else they were corrupted.

  Once you have located the slide or other objects that cause the problem, delete or rebuild.

• How to make the style of the cursor (pointer) to return to the default base pointer after the first click?

  Relatively new to animate dashboard. And not really a coder. I want to stop the slider to the pointer on working capital, once the button has been clicked once. I can't hide the button after the click, but if the cursor is moved above where was the button, it turns into the pointer. I want to stop it, so that it is no longer replaces the pointer and stays in the default cursor after the initial click.

  Hey Rebeca.

  Click on him trying to add the code

  SYM. $("element_name").hide ();

  hope this helps

• Does not include why my slide advances automatically

  Hi all

  I hope you can help.

  I created the slide below.  The idea is that a user clicks one of the buttons and it displays their choice in $$varLength$ $, it works very well - I put the actions of these buttons to assign varLength with 10, 12 or 14 depending on whether they choose.

  The problem is that the slide advance automatically when they make a choice.

  I thought that if I put a box of click on the slide, it would hold the read head, but even with the click box, slide advance again

  You guys have any suggestions as to why this is?  I use 7 Captivate

  

  It would be better to post a screenshot of the timeline as well. And you want to give users the ability to choose several times? How do you move to the next slide? The point of a pause button defaults to 1.5secs, click at the end of the timeline area. If you have kept the default duration of the slide, this means that the click box has his break after the break of the buttons. But it is not detected on your screenshot of the timeline.

  Design by default, it is only when a successful simple action is executed for an interactive object, the read head which will be released at the same time. You didn't explain how the variable is filled with the buttons, it is by a simple action "affect varLength with...» » ? When the user has clicked a button, play head will be move and stop at the place of the break of the click box. If all buttons are stopping at 1.5secs, this means that the other buttons can't be clicked more because the playhead is located in the inactive part.

  Maybe Rod answer to solve your problem, if you have indeed changed the moment of pause. Another way is to replace the simple action by a standard action, because then the playhead is not released. And the user will be able to change your mind and click another button.

  http://blog.lilybiri.com/why-choose-standard-over-simple-action

  Lilybiri

• Slideshow navigation points - how add/create them?

  Can someone advise me on how to include navigation on a slide show widget points.

  A similar thread here that should answer your query.

  http://forums.Adobe.com/message/5117369

  Thank you

  Vinayak

• With the help of an introductory slide to link to different slides within a project

  Hi all

  I have a little problem on my hands and was hoping that someone may have the solution... and give me a help :-)
  Using Adobe® Captivate® 5, we create a training package where the first slide presents all the major teachings of a particular module. This initial slide shows 4 lessons. Users are supposed to click on the title of the any of these 4 classes to start. I have been using click boxes, but finding only one of them can operate, while others are blocked. Unfortunately they all be available at the same time, users must have the options click on the desired lesson.

  Any thoughts on how I can fix this?

  Thanks in advance!

  Are there questions of quiz or scored the elements of your project before the second part you need to pass to?

  If Yes, you have your Quiz > settings > required the game layout to make it obligatory for "answer" for each question?

  Maybe it's what keeps moving from one section to the other.

  Also, the problem may be that, with the jump to a point middle in a movie, Captivate must return all the slides between your point of departure, and from that point.  In the case of large projects, this can take some time.  So, how many slides are there in your project and interactive elements how much y at - it altogether in your film?  (You can check this figure by looking at project > Advanced Interaction dialog.)