Indicator string for resizing programmability

Similar Questions

• Y at - it an easy way to change 323 (string) for "43 01" (hex string) or 3249 (string) to "0C B1" (hexadecimal string)?

  Y at - it an easy way to change 323 (string) for "43 01" (hex string) or 3249 (string) to "0C B1" (hexadecimal string)?

  Thank you.

  Like this?

  

  It depends on type of exactly what you want in the end.  Do you want a channel which shows the 4 characters who are the hexadecimal number for the number you enter.  Or do you want a channel which has only 2 (1 for each byte) characters, but the indicator is formatted to display those hexadecimal display?

• Concatenate an integer to a string for?

  Hello

  I'm new to LabVIEW.

  For my internship, I GPIB hardware control and to take certain measures.

  I use the GPIB write VI which accepts a string for its data entry.

  The command I want to send is of the form: "apply 5, 1".

  I thought to concatenate a string ('Apply_"), an integer ('5'), a coma and space (" ", _") and the last integer ('1'), so that I can increment integers in a loop if necessary.

  However, the VI of string concatenate does not accept the whole entries.

  Also, I think I'm going hard on this topic (I thought adding integers as strings, but then I won't be able to increment them at each iteration).

  Can someone help me?

  Thank you very much

  Nicolas

  You can use the Format function in the chain.

  Ben64

  

• Hi, I have two decimal strings, each of them contains the numbers change over time. I want to plot them on the graph XY, a string for each axis. Can you show me how do?

  Hi, I have two decimal strings, each of them contains the numbers change over time. I want to plot them on the graph XY, a string for each axis. Can you show me how do?

  This is not a formula, but a constant simple schema of a table complex. Wire remains, then do a right click of the terminal of the initializer of the feedback node and select "create constant. That should do it.

• Convert resultlist container to a string for report

  Hi all

  Is there a way to convert a resultlist containing a string? I have a ResultList of a separate test that I need to add to the ModifyBatchReportHeader point of the string for my report in ASCII format.

  I tried adding "str (OtherTestResults)", but it adds just periods as if he doesn't know how to access the test data (name test, measure, etc.). Is there a a way to convert it containing a string the TestStand way automagically done at other times?

  Thank you

  Chris

  Hi Chris,

  Unless you said, I did not realize the batch mode.

  For my example, I used the ModifyBatchReportFooter. You can also use the header.

  You just have to play with the HTML tags.

  This example only works with HTML-reports!

  For the generation, it uses the sequence: PutResultsInReport reportgen_html.seq in the template folder - OR

  Hope this helps a little more

  Jürgen

• Programmatically change text in PS? Legend on an invisible control? Indicator string as the title?

  I have a nice decoration on my panel indicating the name of the program and the version in big bold letters. I quickly read the text to the place an ini file, but do not know how to properly present it.

  In fact, I like having the channel indicator that resembles a title and not an indicator of the chain.

  Because it is easy to change the caption on a control I tried, but then I just want to see the legend, not the control.

  I guess I can change something indicator string if the text is on the left.

  Quick question and I feel quite stupid, not knowing how to solve...

  

  Use a classic string indicator.  Manually change to the background and framework are transparent.  It will now look like a label.

  Programmatically write new text as needed.

• looking for resizer in xp for windows power toy image 7, 64 bits

  looking for resizer in xp for windows power toy image 7, 64 bits

  Try this freebie:

  (It's always a good idea to create a system restore point before installing software or updates)

   I think you'll like this one. It is very close to the old XP resizer!
   
  Image Resizer Powertoy Clone for Windows 64-bit-
  http://ImageResizer.codeplex.com/releases/view/61778
   
  * I downloaded it, and it worked for me. But, proceed at your own risk *.
  Be sure to back up first!

• Is there an API for resizing the image "smoothly"?

  To get thumbnails of images, I use EncodedImage.scaleImage32 (). It works Ok, but when I open the native image (from the camera app) Viewer I see the difference in quality - thumbnails Viewer native look nice (smooth, anti-aliasing), while mine are a little ugly. It seems that native Viewer resizes images using a filter (bicubic or sth like this). How can I do the same? Is there some API for resizing 'smooth '?

  In 5.0, but it does not work with images.

  Nothing native pre - 5.0, you must implement your own.

• Hello, my copy of Dreamweaver CS4 stopped working, a message appears indicating "license for this product has stopped working" error 150:30

  Hello, my copy of Dreamweaver CS4 stopped working, a message appears indicating "license for this product has stopped working" error 150:30. I have a license I bought from Adobe directly, and which has always worked well. Any tips?

  I have a new iMac, retina 5K, 27 inches. end of 2014 with a 4 GHz Intel Core i7, 32 GB memory DDR3, Mac OS Yosemite

  I contacted Adobe support, it seems lie that serial number has not worked because I have chosen English instead of English Intermational! Thanks again for the quick response. Concerning

• Array of strings for DNS in workflow Clone VM

  The VM Clone with single NIC workflow requires an array of strings as a parameter inut DNS servers. I'm not sure how to pass an array to this parameter. In c#, I have:

  String [] dnsArray = {"10.130.132.109", "10.130.132.108"};

  dns1Attribute.name = pmArray [18] .name;

  dns1Attribute.type = pmArray [18] game;

  dns1Attribute.value = dnsArray;

  attributeArray [18] = dns1Attribute;

  However, c# generates an error 'cannot implicitly convert type() Sting in string' for line 4. I tried passing a single string as attribute value, but it doesn't seem to work either - no value is entered in the workflow when it is running.

  Anyone have any ideas on that. An example of Java would be nice too - I am flexible.

  Thank you!

  Hi geno5150,

  here how to create a table to pass:

  var monTableau = new Array();

  MyArray.push ("10,20,30,40");

  MyArray.push ("192.168.100.254");

  For this move as an attribute:

  var AttrArray = newArray();

  var Attr = new Attribute();

  Attr.Name = '< ParameterName > '.

  Attr.Value = myArray;

  Attr.Type = "Array";

  AttrArray.push (Attr);

  push the other attributes & run the workflow

  That's all

  -

• Set the string for LabView dll parameter

  Hello

  I created a simple vi LV 2010 (departure vi), which reads the identification of an oscilloscope. Then I take this vi and incorporate it into a dll of LabView. I have test the dll calling LabView (RunFrom dll). Basically, it seems to work, but len and ReadBuffer back empty. It must be in the way I'm configuration configuring the setting for Readbuffer (settings) in the configuration of the dll. I tried several different configurations, but nothing seems to work. Any help is appreciated!

  What is the parameter len?  Normally, you should only set the length of the string, but it seems that you did not do this.  Also, you're passing len by value, and not by reference, so the function is expecting her to be a starter and you will never get return a different value to any value that you provide.

  Do not use a local variable of the ReadBuffer for entry "readbuffer".  You must pass a string initialized long enough to contain the expected quantity of data.  The best way to proceed is to use the array to initialize to create a table of U8, then use the array of bytes to a string.  Set the parameter 'minimum size' to 'len' then run through the length of the string initialized (this is not mandatory but is recommended).  If you need the length obtained output, add another indicator and another parameter to this value.  There might be a way to do it with one by len parameter passing by reference, you need to experiment (it is certainly feasible in C but I don't know if allows him to LabVIEW).

• Indicator string displays incorrect results

  Hello, I have a duty, and I am facing some problems with string indicator.

  What I am assigned is:

  The user fills 2 bays with 5 numbers

  E FILL button is clicked, and then the program checks if the items created in table 3 matches elements in table 1 and 2.

  (I have attached the file doc for clarity).

  Channel indicator sometimes give the wrong answers. (is there a better way to solve the channel indicator?)

  Thank you.

  the vi is version 10.

  Better is how? Do not place the extra empty lines in the string? If this is the case you only need to update the chain when necessary, not every iteration of the loop. If you mean something else I don't know what you want to improve.

  There are many things that can be improved from a coding perspective. When you wire up a table in a loop, it is preferable to use automatic indexing to determine the number of iterations of the loop will run. Except that as in the case of your first loop, you must use table size to determine the number of iterations to run, not a constant value. Your second loop can be simplified and does not require the table. Use a shift register and reduce to zero the value of the Boolean value each iteration. In addition, the logic in the context of the third would be easier to understand if you used one or rather than an and. If any value is True check tables. Your actually have the reverse logic. If it is true, it is the opposite of what someone might think. Another method would be to add the two results and wire numberic value to the structure of the case. Case '0' means that everything is acceptable. If default (anything not 0) means you have unacceptable values.

  A final comment would be what is actually your stop condition? The two nested while loops seems rather strange and unnecessary.

• game-vmguestnetwork interface will not take string for dns-

  
  I'm tryign to form a script that will respond to differences in the number of ip of the dns and wins.  I can't pass a string to the dns - for setting the ip address.  I say $dns1, dns2 $ and it works but if I create a channel and send it there is an invalid dns error.

  Basically im import values and the wantign to check $dns1 and $dns2 and always send the $dns variable like it that my csv might have 2 dns for some servers and 1 victories for an another vs 2 both as a difficult standard.  I noticed that the cmdlet does not like spend you a varialbe $null.  any ideas, my goal is to not have a CSV with two dns and wins and let me build the logic to generate the string to the question of whether they have a value associated with them for a particular server-based dns and wins.

  $vmServers = import-csv $Import | Select name of the server, name, ip, subnet, gateway, dns1, dns2, wins1, wins2

  
  ($server in $vmServers){

  $computer = $server. ServerName

  $name = $Server. name

  $ip = $server. ip

  $subnet = $server. subnet

  $gateway = $server. entry gate

  $dns1 = [string]$server. DNS1

  $dns2 = [string]$server. DNS2

  $wins1 = [string]$server. WINS1

  $wins2 = [string]$server. Wins2

  
  #DNS to analyze how many DNS entries is required Max is two, but PowerShell will not accept a null value

  
  
  

  if ($dns1 -ne ""){

  $dns = $dns + $dns1

  if ($dns2 -ne ""){

  $dns = $dns1 + "," + $dns2

  Here's what im everything to get. I can't pass the $dns value if it is only one variable then it works.  Soon, as I have ip, ip and try to pass as $dns it fails.  The cmdlet says it requires a chain, but it is of course no exception.  If I type in manually from the intellectual property that it works very well the question is only forming a chain above with the dns for a particular server and if there is more than one IP so fails, even though my format is exactly the same as if I typed manually in DNS.

  game-vmguestnetworkinterface

  -GuestUser $AccountForOSAuth -GuestPassword $PasswordForOsAuth -vmguestnetworkinterface $nic -ippolicy static ip $ip -netmask $subnet -Gateway $gateway -dnspolicy static dns $dns -winspolicy static -wins $wins

  
  

  Hello, Foker-

  As this DNS setting - takes an array of one or more strings, you can append these DNS not null strings in a table and then use this table for the value of the parameter.  Thus, for the part of DNS-determination, something like:

  ## make empty array$arrDNSStrings = @()## for each potential DNS string, if not null or empty, add its value to the array of DNS strings$dns1, $dns2 | ForEach-Object {if (-not [String]::IsNullOrEmpty($_)) {$arrDNSStrings += $_}}
  
  ## then, call Set-VMGuestNetworkInterfaceSet-VMGuestNetworkInterface -GuestUser $AccountForOSAuth -GuestPassword $PasswordForOsAuth -VmGuestNetworkInterface $nic -IPPolicy Static -Ip $ip -Netmask $subnet -Gateway $gateway -DnsPolicy static -Dns $arrDNSStrings -WinsPolicy Static -Wins $wins
  

  Which means that at least one of the $dns1 and $dns2 has the value (not null).  If you say that both can be void/null, but you use another entry for everything (as indicated by the original $dns variable in your code), you could add that, "for all" DNS value in the table $arrDNSStrings to start - just add after the initialization of the $arrDNSStrings empty table.

  How does do for you?

• Recommendation for the 3rd party utility for resizing

  I need to resize the size of my VM.  I am using Windows XP Pro (SP3).  When I saw the KB for 'how to' that's all very clear.  The one hiccup, with XP I use a "third party utility to resize disk partitions", after the VM disk size has been increased. The note with this statement indicated that there are some free utilities for this process.

  Since I'll only do it once, I would have preferred not to pay for the utility, if possible.  All of the recommendations - in particular as not to alter the quality of the 'free' choice?

  the gparted LiveCD should do.

  If you boot in this LiveCD you MUST first change the type of the VM to Linix guestOS - if you forgot that the mouse will be unusable

  don't use PartitionMagic - it's obsolete and dangerous IMHO

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Search a string for

  Hello guys,.

  I have an array of strings (list of names of the technical, by example, PVE_12S1, PVE_12S2, PVE_12S3, PVK_12S1, PVK_12S2, PVK_12S3, PtVE_12S1, PtVE_12S2, PtVE_12S3). As a put, I group the names ending with the same number (for example, I should put it like PVE_12S1, PVK_12S1, PtVE_12S1) when I enter my desired number of 1. Hope you guys can help me. Thanks in advance

  What have you tried?