the audio disc slot eject all disks before he reads or plays anything

Similar Questions

• The superdrive in my iMac (21.5, late 2009) refuses to mount new audio CD. It is very good with cds that have already been imported into iTunes and Ditto DVD. But the new CD is ejected, which means that I can't add anything to my music library on a cd.

  The superdrive in my iMac (21.5, late 2009, running OSX 10.10.3) refuses to mount new audio CD. He sees the cds, which have already been imported into iTunes (12.3.2.35) and same DVD. But new (IE back to the computer) cds are ejected, which means that I can't add anything to my music library on a cd. Any help would be appreciated!

  First try to reset the SMC & LANDAU 2 - 3 times back to back by LANDAU and Intel iMac SMC resets with all devices disconnected.

  If that does not resolve the problem, go to your local office supply store and get a CD/DVD cleaning kit and use it. If this does not work, then the SuperDrive is end of life and should be replaced. Many users with iMacs older everything just get external DVD readers, if you need to do this, I recommend you contact OWC (www.macsales.com) and they can direct you to one that fits your needs.

• Media Player when I go to burn my songs it says data instead of CD disc. How can I change the audio disc?

  When I go to burn my songs it says data instead of CD disc. How can I change the audio disc?

  original title: Media Player

  Just a thought...

  Well, click on the burn tab should open a menu where you can select any Audio CD or data CD.

• Mac pro end 13 eject all disks when sleep

  My new Mac pro brand is eject all alone external drive when he falls asleep.

  It is a problem major given that all my virtual machines are on external drives. Needless to say that when I wake the machine all the virtual machines have crashed because it the hard drive was missing when he fell asleep.

  Someone at - it recommendations

  What specific drives/enclosures and how are they connected?

• Scratch the full disc - need advice on disks

  Hello

  I have a brand new installation of i5 Intel Core with 8 GB of RAM and a 300 GB HARD drive. Full specifications below:

  • ASUS P7P55D-E Pro
  • Intel Core i5 750
  • 8 GB Corsair Dominator PC12800 1600 MHz DDR3 (more fan)
  • NVIDIA Quadro FX1800 768 MB
  • Corsair TX650 PSU
  • Antec 300 case
  • WD Velociraptor 300 GB
  • Samsung F2380 23 "monitor
  • Wacom Intuos4 graphics tablet

  I use the WD Velociraptor 300 GB, 10 000 RPM drive as a single drive on this computer. There are currently 150 GB free. The reason why I had such fast propulsion was to deal with large files and boost, loading time.

  I get the error "scratch disk is full" when you try to open a .psd file - 4.3 m x 2.4 m, 150 dpi CMYK and is about 173 MB. Also, I noticed that the 150 GB remaining fills.

  So, my questions:

  1. Should I think about getting an extra drive?
     
  2. If so, a reader scratch must be fast or if the disk with the operating system should be faster?
     
  3. I have WD 2 x 500 GB disks that I can transfer to this computer - it would be good in a RAID0 array?
  4. How much space work disk would I need to deal with the bigger files? I have some that are several GB in size, but never had this problem of scratch disk before, even on the previous system, which had only 2 GB of RAM.

  Well, you will need more free space on your hard drive.

• The audio disc when you're done burning

  As a result of my previous post, using Applescript I select audio files in the Finder, import them into iTunes, then burn a CD in a single pass. I tried adding, using Automator, a shell after the script to eject the tray to help

  do shell script "drutil tray eject"

  but the problem is the action wants to arrive before the end of the burning CD and iTunes does not return any error this cd. Can someone proposes a method to let the first action to finish or a check that there is a cd with the data present before attempting to eject?

  Tried below. No luck.

  

  It doesn't seem to be anything in the dictionary of iTunes related to the State of CD burning, so there is no direct way to detect when it's over.

  It's been a while since I burned a disc, but your best bet may be an indirect approach - iTunes post a dialog/window showing the progress of the burn? If this is the case, you could add a loop inside your initial script to detect when this window disappears - something like:

  the value of doneBurning to false

  Repeat doneBurning until

  if not (there are window "CD Burning") then - change the name to anything that is actually used

  the value doneBurning to true

  end if

  speed 5 - wait a bit before checking again...

  end Repeat

  
  

  It's gross, but it should work.

• Impossible to extend the local disc (c :)) after local disk (d :)) reduction

  I have narrowed my local disc D for 10 GB, because I wanted to extend my local C drive. After I shrunk D, I went to extend my C drive, and I could not extend it, it would mean that these 10 GB simply disappeared. In disk management, it is said that these 10 GB are still there, that is, its size is still normal, but when I open my computer it says that it is smaller than 10 GB, and it really is. That space is just gone, I guess.

  I hope that I was clear enough. Any ideas?

  Depends on the free space is located compared to C

  Victory records management integrated that it cannot be done if the free space is right next to C

  Use the free Partition of http://www.easeus.com/partition-manager/

• Can not remove the memory stick slot on Satellite A series card reader

  I hava inserted a memory sony stick into the slot of the card and can not read or retrieve it from the slot.

  I need to disassemble the machine to remove or is there an easier way?

  Thanks for the brief info;

• How to set the audio to all be at the same level?

  I have a file where a speaker recorded in his laptop and sometimes he sits in his chair and his voice sounds like he's going in the background shortly. Then, later in the track, it gets closer to the computer again and the audio to good level. What the best and easiest way to adjust the audio set is stable all the way or on the same level set?

  Try the effect of speech Volume Leveler menu effects/Amplitude and Compression. There are other ways to do this either manually or using a compressor, but in this case for a quick and dirty solution, the speech Volume Leveler can do the work for you.

• How to increase the control limits for the Audio Volume?

  I have upgraded my PC base unit and no longer have the output of the Speaker Volume I had before. The audio output is more silent than before with the same speakers I used. I have moved all the sliders on the control panel of the Volume on their maximum position, but still can't get enough of output to the speakers. The important thing is for my use are 'Volume Control' and 'Wave', and these are set to the maximum. Now I have a motherboard with Intel D845GERG2 Intel i845GE chipset. The operating system is Windows XP Professional SP3, as previously. The sound card is SoundMAX Integrated Digital Audio with Legacy audio drivers. I checked using Device Manager drivers and hardware to work properly. The problem is software because I can achieve the required high speaker volume if I use VLC Media Player and set the volume to 200%. With Windows Media Player, set the volume to 100% is sufficient. I'm looking to increase range parameter on the control panel of Volume as a general solution. Can you advise if this is possible? I looked at a few ideas, these courses: edit files (.inf) SoundMAX driver. Modify the registry keys concerned. Use different audio drivers (none seem to be available for my hardware). Install the software to boost the audio output (VLC Media Player should be achieve this somehow). Install alternative (rollback) Microsoft drivers. Any advice would be much appreciated.

  Just an update of my efforts on this issue.

  I revisited the audio registry settings SoundMAX for HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ \0005\Settings {4D36E96C-E325-11CE-BFC1-08002BE10318}. These are installed when you install the driver for SoundMAX Integrated Digital Audio. Changing these settings has already failed to get an increase of output audio volume. I have now found some settings of the value of these registry keys that have given me a satisfactory increase in the volume of the audio. In short, the cure for my situation was:

  The file source (wdm3516b_Cadenza.exe) driver available from the Download Center Intel is a self-extracting ZIP file. Unzip this file to a location convenient temporary store (C:\Temp)

  Use a text editor (Notepad) to edit the INF of the driver - in my case, it's "smwdmCH4.inf. Changes to this file cause the digital signature of the file to be invalid, but choose "Continue Anyway" to solve this problem during the installation of the driver. To increase the sound volume levels, the audio volume registry key value parameters that have been predefined 08 (hex) have been changed to 01 (hex). I suppose that this change dB levels produced by the SoundMAX Integrated Digital Audio.

  To install the new settings:

  Uninstall the SoundMAX Integrated Digital Audio hardware by using Device Manager.

  Restart the PC - this should give a "new hardware found" restart of the PC.

  Use Device Manager to reinstall the driver for SoundMAX Integrated Digital Audio. Do not use the automatic selections for this - run the installation process where you stored the INF driver edited file.

  Once installation is complete, a check on the properties of the device must indicate that the device is functioning properly.

  Use regedit to check that changes in the edited file driver INF appeared in the area of the Windows registry - in my case, it is HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {4D36E96C-E325-11CE-BFC1-08002BE10318} \0005\Settings.

  I will emphasize that it is NOT a recommended fix - it turns out that it worked for me. The usual caveats apply - save your original settings, or better yet, use software disk image to make a copy of your drive hard so that you go back to square one if she's going "pear-shaped" with adaptations that have been made.

• my HP Pavilion laptop 2249wm g6 will not read PDF files on audio disc why?

  My HP Pavilion laptop 2249wm g6 crashed twice in 2 weeks. When he returned from recovery he had nothing in it but windows 8 (I have upgraeted to 8.1) she does not restart right. It will be not also offer PDF files that are on the audio disc now I have to download something?  It blocks also almost all clicks on links how can I stop this. all this for now thank you.

  Hi Cj97Lj,

  I'm sorry you had this much trouble with your laptop.

  I send you the HP Pavilion g6-2249wm Notebook PC product specifications, it will let you know what came with this computer. I also want you are trying to open HP Pavilion Notebook PC Maintenance and Service Guide of g6 because it is a PDF file. If you open then we know that you have installed Adobe and that something else is causing the problem. If you can't open it, then download and install Adobe Reader from my previous post and then try to run your audio discs.

  I also send this document for recovery software (Windows 8) Options , which explains how to do the recovery.

  I have my fingers crossed it works for you, keep me posted.

  Thank you and have a great day!

• Missing the start of the audio clips Satellite L350D - 12M

  Hi all

  I took up a L350D - 12 M at the weekend and I'll have a problem with the audio output.
  I use a timing software model car and part of his job is to generate a series of short tones (beeps) to start the races.

  The problem I have (as far as I can tell), it is that the audio chipset is not all the time. I guess it's one thing to save energy.
  The time it takes the chipset to wake up is greater than the length of the tone played by software and you can't hear it (or you could catch just the end of it). There are 10 tones in the countdown to the race start and it does on everyone else.

  This is a real show stopper for me and I could do without the hassle of trying to persuade the shop to return the laptop.
  Is there a registry setting or setting of software that I can configure to make sure that the audio chipset is still living? (If this is the problem, of course).

  The OS is Vista Home Premium and should make a difference, I'm sure that the tones are based midi.

  Thanks for reading,
  Jon.

  Test if this is the case of the files audio to .wav. Just navigate to your windows directory media, there are some of these files. If they play to their full length, then it is not your sound card, do harm.

  Maybe your program is not completely compatible with vista. Could try you on another machine with XP installed?

• Audio selection in auto Cs5.5 still plays rather then change just the audio track

  I'm a newbie even after moving to DVD SP in yet for the creation of menu blu ray. Ive read and re-read the help files and they seem to be the same for the versions still dating back at least to cs3 for that matter... so I do something wrong or still just simply do not do a very basic thing...

  I'm building a blu - ray with a video of singel track and 2 audio player. I am trying to bind a menu to allow a user to select a 5.1 or 2ch audio version for a feature film. Everything should be simple. I have a menu with several buttons. Each links button on an audio track in my calendar.

  However, when I test my links, instead of simply changing the audio and return to the menu (according to the instructions in the help files), the movie plays from the beginning.

  The correct audio track is played, but it is not my intention, at that time there. I want the user to choose the audio track and then allow the user to press another key play or to another menu and back before the movie starts.

  So, how do just change the audio track but he not play there?

  Aid says use "indicate relationship" so I choose this option and select the timeline, Yes, select the track audio 1 or 2, Yes. But are there any different way to do it if I really wanted to play the track at this time as well. What is the fundemental bit I'm missing here? Something to do with the type of button or a werid overide setting I'm missing? Can still actually do this? its quite frustrating seen arising from the use of SP of DVD, which allows any script, set gprm/sprm registers in a program that does not allow you to do anything beyond creating very very basic.

  Any help would be appreciated. Thank you.

  brand

  maniac101maniac wrote:

  However, when I test my links, instead of simply changing the audio and return to the menu (according to the instructions in the help files), the movie plays from the beginning.

  The correct audio track is played, but it is not my intention, at that time there. I want the user to choose the audio track and then allow the user to press another key play or to another menu and back before the movie starts.

  To return to the menu after changing audio or any subtitle track, you must select the menu desired in the link option specify and change the audio and subtitle accordingly.

  

  In the example above, what I did was, I went on the link specify, the menu, like target and also changed the audio track it and clicked OK

  So here, after pressing button 3 (point 3), I would like to return to the menu and my audio would be handed over to the audio 2 track.

  After that, what timeline I play, that would be played with track audio 2.

  This is just a small example to show how it's done. Define navigation as you want.

• Ability to add the owner/3rd party Audio out the Audio preset?

  Is it possible to add your own .wav or mp3 files directly in the Adobe Premiere folder where are audio effects?

  I would like to have loaded on the program directly instead of add them on my media folder, so I KNOW what I'm working with. (For example the sounds I've created / download when I click Audio at the bottom of the program and have as an option)

  Thank you!

  dchi

  This is suggested by how to add sounds user displayed below first elements 13/13.1 Windows Audio tab/sound effects.

  First Elements ATR troubleshooting: EP 13 / 13.1: adding sounds user under the Audio tab

  I have proof it will read once again in the morning morning. Can't wait to see if this is what works for you.

  Thank you.

  RTA

• When I try and add the audio to a button, captivate crashes

  Hello

  I tried several times to add an audio button / click on the box and whenever I do, captivate goes down and I use the Task Manager to terminate the program

  I am using captivate 6 and I run as a normal mode and as administrator and I get the same question at a time.

  I have insert a button / click on the box and then on the property inspector Panel I click Add audio (in the audio section) and then it does not allow me to do anything else. Help, please?

  Ok. Try this.  When you click on the button Add Audio and Captivate freezes, try to hit ESC on your keyboard to computer.  If it seems to bring Captivate in your control, your problem is that the Audio object dialog box which should appear to allow you to specify the audio file is located somewhere off the screen where you can see it or interact with it.  It is a known issue for several versions of Captivate now due to the use of multiple monitors when the user changes their configuration to monitor at any given time.  You must re-create the previous monitor configuration so that you can find the missing dialog box and drag it to the main window.