Individual office, no vCenter: hidden my connection to the server

Similar Questions

• Connect to the server only in the office

  I want to know if there is a way that when I'm at my computer desktop will automatically connect in server folders, and when I'm at home it will automatically connect in server folders at home.  When I'm here every time that I also have to manually connect to the server and then when I go out to disconnect manually.  I want to if there is a way that the computer can make these connections without me manually linking every time and he knows what network I'm connected to so it only connects in the records of good server for this location.  I tried to use it as a point of connection, but I do not start my computer whenever I come home or when I get to the office.

  I've got El Capitan installed and updated.

  You can take a look at an application called ControlPlane (http://www.controlplaneapp.com/about/). It performs actions based on rules based on the network, etc.

• vCenter could not connect to the VSM Server

  I have SanHQ and HIT running well on vSphere 4.1. After upgrading vSphere 5.5 and HIT to 4 VSM, my new vCenter could not connect to the VSM server at all.

  1 VSM ip address must be configured on the management or iSCSI network?

  2. I have 2 vCenters to AC and DC, respectively. In this case, I have to install 2 VSM, each to each site? Note that although my VM networks on both sites and management are all connected via VPN, iSCSI networks are isolated.

  3. is it possible to deploy the VSM 3.5 and 4 so that the two vmware VI Client and Web Client have access to VSM features?

  VSM does not work with Linked vCenters mode so that a VSM would be able to access the two vCenters.

  You will need to deploy both VSMs.

  You cannot run two MSM 3.5.x and 4.0.x at the same time.

• VSphere Web Client cannot connect to the server vCenter Single Sign On.

  I'm running the virtual appliance of the trial 5.5.0.20400 build 2442330 on ESXi 5.5.0, 2068190

  While I try to log on to the Web Client, I get this error.  VSphere Web Client cannot connect to the server vCenter Single Sign On.

  I put fallow the steps to disable SSO by changing the webclient.properties line add file and ad sso.enabled = false .    Then on the vCenter Server Appliance, restart the vSphere client service by typing service vsphere-client restart .

  I enclose the reference files.

  All ideas will be useful

  
  

  This answer was simple, all I had to do was remove the # in front of the statement in the file.   and SSO has been disabled after the restart of the service.

• Unable to connect to the server vCenter because the user name or password not valid

  Hello

  I have a VMware View version 5.1.0 installation (704644) and when I try to add additional virtual machines to an existing pool I get the message (cannot connect to the server vCenter because the username or password are invalid).

  I have checked all the instructions below and still failed to add virtual machines

  If you are unable to connect to vCenter Server:

  1. Confirm that a network port exists and is available. For more information, see increase the number of ports assigned to a virtual switch for VMware View (1026014).
     
     
  2. Confirm services VMware View manager are running. For more information, see check which required VMware View Manager services are running (1026136).
     
     
  3. Confirm that the network is correctly configured for use in a VMware View environment. For more information, see in the VMware View virtual desktop network configuration (1026498).
     
     
  4. Confirm that name resolution is functioning properly in your environment. For more information, see audit for VMware View DNS settings (1026017).
     
     
  5. Check that the permissions/credentials are correct for the user of the vCenter server. For more information, see confirm/credentials permissions are correct for user vCenter/vCenter server (1028705).
     
     
  6. Confirm that outcomes of the interaction of third parties do not exist with the operating system. For more information, see the confirmation that there are no questions of third-party interaction with the OS in a VMware View environment (1027466).
     
     The virtual machine, I have already assigned to this pool, I can access. I can access by using the client view and also from the console.
     

  Has anyone else seen elsewhere?

  See you soon

  You have the same problem with other pools?   Have you returned through configuration under the Configuration/servers view vCenter configuration?

• Safari/Firefox cannot connect to the server

  I'm trying to solve a problem, preventing a browser (Safari, Firefox), to access a website... because the same message appears «...» Unable to connect to the server. Could not open the page "http://www...". "' because... unable to connect to the server", not for all websites... just some, is this likely to be other than a virus/spyware/mailware question? I ran Etrecheck and have the following report:

  Any help would be appreciated

  EtreCheck version: 2.9.13 (267)

  Report generated 2016-07-11 22:33:59

  Download https://etrecheck.com EtreCheck

  Time 02:23

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click the [details] links for more information on this line.

  Click [delete] to remove the adware.

  Click on the link [check files] help with unknown files.

  Verify the signatures of Apple: enabled

  : Another problem

  Hardware information: ⓘ

  MacBook Pro Intel Core 2 Duo (aluminum unibody) (Late 2008)

  [Technical details] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro5, 1

  1 2.4 GHz Intel Core 2 Duo CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1067 MHz

  0/DIMM1 BANK

  OK 4 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = replace soon - Cycle count = 1338

  Video information: ⓘ

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1440 x 900

  NVIDIA GeForce 9600M GT - VRAM: 256 MB

  System software: ⓘ

  OS X Yosemite 10.10.5 (14F27) - time since started: about 7 days

  Disk information: ⓘ

  SAMSUNG SSD 850 EVO 250 GB disk0: (250,06 GB) (Solid State - TRIM: No.)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 249,20 (Go 162,21 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  MATSHITADVD-R UJ-868)

  USB information: ⓘ

  Built-in ISight from Apple Inc..

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Goalkeeper: ⓘ

  Mac App Store and identified developers

  Adware: ⓘ

  /Library/LaunchAgents/com.sarcophagusscarid.agent.plist

  /Library/LaunchDaemons/com.adrenineUpd.plist

  /Library/LaunchDaemons/com.ossificUpd.plist

  /Library/LaunchDaemons/com.pseudofilariaUpd.plist

  /Library/LaunchDaemons/com.sarcophagusscarid.daemon.plist

  /Library/LaunchDaemons/com.sarcophagusscarid.helper.plist

  6 adware files found. [Remove]

  Unknown files: ⓘ

  / Library/LaunchDaemons/com. Hecatean.plist

  /etc/Hecatean.sh

  / Library/LaunchDaemons/com. Chiasmus.plist

  /etc/Chiasmus.sh

  /Library/LaunchDaemons/com.solidifiableness.plist

  /etc/solidifiableness.sh

  /Library/LaunchDaemons/com.uertur.plist

  4 unknown files found. [Check files]

  Launch system officers: ⓘ

  [loaded] 5 tasks of Apple

  [loading] 147 tasks Apple

  [operation] 60 tasks Apple

  Demons of launch system: ⓘ

  [loaded] 45 tasks Apple

  [loading] 133 tasks Apple

  [operation] 84 tasks Apple

  Launch officers: ⓘ

  [loading] com.google.keystone.agent.plist (2016-03-03) [Support]

  [operation] com.sarcophagusscarid.agent.plist (2015-09-23) [Support]

  Launch of the demons: ⓘ

  com [running]. Hecatean.plist (06 / 06/2016) [Support]

  [failure] com.adobe.fpsaud.plist (2016-05-09) [Support]

  [loading] com.adrenineUpd.plist (2015-10-14) Adware!  [Remove]

  /etc/run_upd.sh

  [operation] com.apple.enthinge.plist (2016-05-19) - no signature!

  [operation] com.apple.usktas.plist (2016-05-26) - no signature!

  [operation] com.chiasmus.plist (2016-06-08) [Support]

  [loading] com.google.keystone.daemon.plist (2016-03-03) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [loading] com.ossificUpd.plist Adware (2015-10-12)!  [Remove]

  /etc/run_upd.sh

  [loading] com.pseudofilariaUpd.plist (2015-09-29) Adware!  [Remove]

  /etc/run_upd.sh

  com.sarcophagusscarid.daemon.plist [no charge] (2015-09-23) Adware!  [Remove]

  / Library/Application Support/SarcophagusScarid/Agent/agent.app/Contents/MacOS/agent

  [operation] com.sarcophagusscarid.helper.plist (2015-09-23) Adware!  [Remove]

  / Library/Application Support/SarcophagusScarid/Agent/agent.app/Contents/MacOS/agent

  [operation] com.solidifiableness.plist (2016-06-08) [Support]

  com.uertur.plist [no charge] (2016-05-15) [Support]

  [loading] jp.co.canon.MasterInstaller.plist (2015-06-28) [Support]

  Launch User Agents: ⓘ

  [operation] com.spotify.webhelper.plist (2016-07-04) [Support]

  jp.co.canon.Inkjet_Extended_Survey_Agent.plist [no charge] (2012-12-04) [Support]

  User login items: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Synchronization of box application (/ Applications/box Sync.app)

  Hidden Spotify Application (/ Applications/Spotify.app)

  Box Edit Application (~/Library/Application Support/box/Box/editing area Edit.app)

  Application Com Local Server box (~/Library/Application Support/box/Box/editing area local Com.app)

  Other applications: ⓘ

  [Ongoing] /library/uertur/uertur.app/Contents/MacOS/uertur

  com [running]. Box.Box - Edit.71032

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000004.Microsoft Word

  [operation] com.box.Box - local-Com - Server. 40360

  [ongoing] com.box.sync.27580

  [ongoing] com.microsoft.Excel.94036

  [ongoing] com.Microsoft.AutoUpdate.FBA.11392

  [ongoing] com.spotify.client.48028

  [ongoing] JP.co.Canon.IJ.scanutility2.CIJSUAgent

  [ongoing] org.Mozilla.Firefox.28432

  [loading] 365 tasks Apple

  [operation] 185 tasks Apple

  Internet Plug-ins: ⓘ

  FlashPlayer - 10.6: 21.0.0.242 - SDK 10.6 (2016-05-20) [Support]

  QuickTime Plugin: 7.7.3 (2015-10-14)

  Flash Player: 21.0.0.242 - SDK 10.6 (2016-05-20) obsolete! Update

  EPPEX plugin: 10.0 (2014-09-16) [Support]

  Default browser: 600 - SDK 10.10 (2015-10-14)

  SharePointBrowserPlugin: 14.6.4 - SDK 10.6 (2016-06-08) [Support]

  iPhotoPhotocast: 7.0 (2015-03-02)

  3rd party preference panes: ⓘ

  Flash Player (2016-05-09) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  10% WindowServer

  kernel_task 2%

  2% spotify Helper (2)

  1% box sync monitor

  1% fontd

  Top of the process of memory: ⓘ

  847 MB kernel_task

  Firefox 598 MB

  Softwareupdated 475 MB

  344 MB Spotify Helper (2)

  Mail 254 MB

  Information about virtual memory: ⓘ

  1.22 GB of free RAM

  used GB RAM 6.78 (2.15 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  July 10, 2016, 13:18:34 /Library/Logs/DiagnosticReports/chiasmus_2016-07-10-131834_[redacted].crash

  / Library/chiasmus / * / chiasmus

  Click go > computer > Macintosh HD > library > LaunchDaemons remove adware in trash, restart > empty trash.

  Adware: ⓘ

  /Library/LaunchAgents/com.sarcophagusscarid.agent.plist

  /Library/LaunchDaemons/com.adrenineUpd.plist

  /Library/LaunchDaemons/com.ossificUpd.plist

  /Library/LaunchDaemons/com.pseudofilariaUpd.plist

  /Library/LaunchDaemons/com.sarcophagusscarid.daemon.plist

  /Library/LaunchDaemons/com.sarcophagusscarid.helper.plist

  6 adware files found. [Remove]

• Creative cloud cannot connect to the server

  Hello

  I have a laptop computer on a corporate network that connects through a proxy server (Internet etc is fine).

  When you click on creative cloud in hidden icons he invites me to install an update. When I click on install it falls to 5% and says unable to connect to the server.

  I don't know that the proxy blocks it however, I checked my proxy server and everything seems OK (Nothing blocked for this machine).

  Can anyone advise me the exact URL of the download location using what creative cloud? Especially if these are HTTP or HTTPS if I may to these on my proxy.

  Any help would be appreciated.

  Thank you

  Hi Jordanf42447328

  Because you are unable to connect Adobe servers due to the restrictions of the network of the Office, please check the link below for help:

  Proxy in Adobe Creative products Cloud support

  Hope this helps!

• Horizon View Client 2.2 cannot solve the short hostname to connect to the server

  Not sure if it worked in previous versions, but version 2.2 client view Horizon doesn't seem to be able to resolve the short hostnames to connect to the server.  The FULL domain name or the IP address works fine however.  Here is my config:

  VMware vCenter 5.1. U1 (Build 1064983)

  VMware ESXi 5.1 U1 (Build 1065491)

  VMware View 5.3.0 build-1427931 (1 connection to the server)

  (currently without using composer)

  The servers view and vCenter are virtual machines running on Windows Server 2008 R2 Ent. SP1 64-bit

  My laptop is running Windows 7 Ent. SP1 64-bit (6.1.7601) and I am running View Client 2.2.0 build-1404668.

  DNS seems to work very well on my office and all VMware servers above.  I do a nslookup the hostname of short-sighted connection to the server from the cmd prompt.  The field is defined and in the list of search suffix on each device and the short host name seems to work in all of the other apps on my desktop.  Not facing DNS problems with other applications.  Even the vSphere client accepts a short hostname for the vCenter server.  I know that I can use the FULL domain name or IP address, but I'm just curious to know which prevents the short host name to work in the view client and can it be resolved?

  -Chris

  Yes, the issue was identified internally. View Client used a 3rd party library and it has limitation which results in this problem. Up to now, we are not sure that the fix will be involved in which version. But we follow the problem and get back to you as soon as we have a few farm update.

  Thank you

  Felix

• I need some help please (Horizon View Client can) do not connect to the server of connection, invalid key license server connection

  Dear professionals

  I am trying to connect to connect to the server via the Client view Horizon but when I enter the IP of the server connection I got the error message indicating that

  connection to the server was not a valid license key (see attached photo)

  everything has been installed and configured correctly, I added the vcenter Server view Portal administrator and I also added new swimming pool inside

  See administrator portal, but I don't have the login server license key.

  should I really buy the connection to the license key server? is there any version of the elevation of the connection to the server?

  Please help me

  Thank you

  naoufl

  Yes you need a license key to use the view of the Horizon, there is a 60-day evaluation license if you register here:

  Try VMware view Horizon: Access virtual office

• Firefox Sync cannot connect to the server

  Firefox Desktop 12.0 on Win7 64 bit HP
  Firefox Mobile on Android 4.0.3 14.0 (failed on 2.3.6 either)

  Hello

  I'm setting up synchronization between my Desktop and Firefox Mobile. On the mobile, I tap on 'Sync' and get three alphanumeric codes. Both browsers I have enter my Office Firefox, communicate with the server. The desktop browser says "Device connected" and the mobile browser says 'Firefox could not Sync to connect to the server'.

  What else can I try?

  Greetings, Jost

  You have Firefox mobile Aurora or installed night compilations and synchronization? Rewriting as Service Android resulted in sync works only with one instance of Firefox at the same time.

• I just added my computer outlook (2003) and I use my gmail email. But when I tried to add an outlook folder say he could not connect to the server and said I should be online. So I need help on adding files in appearance.

  How can I add folders in outlook? When I try to add a folder, an error message says, the connection to the server is unavailable. Outlook must be online or connected to complete this action.
  I'm online, and I do not have a server, confused! Anyone know what I need to do to fix this?

  Hello clayzee, welcome.

  I would say, because it would be a problem of Outlook and not so much a problem of Windows, that you transfer to communities in support of office below:
  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  They will be able to help with your question,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need help to connect to the server of composer, in view, administrator

  I'm setting up a Horizon view 6 eval. The text environment will be low, and I want to use linked clones. The configuration is the following:

  5.5 vSphere hosts

  vCenter 6 (device) - not joined to the domain AD due to a bug VCSA 5.5 & 6.0 with the way my AD domain name is named; specifically, the domain name is ad. domain.net, but the name of Pre-windows 2000 is the domain

  View connection on Windows 2012 R2 VM

  View dial on Windows 2012 R2 VM

  Database SQL on separate server

  I followed the instructions in the eval guide and this blog to put in place: Horizon view 6.0 | Of Sean IT Blog

  All with the prerequisites and setup went well. I am now at the stage where I bind the connection to the server with vCenter and composer. The connection of vCenter worked correctly (using a local account that I created in vCenter for display for use with the permissions in a role). In the settings of the composer page, I keep getting an error "Unable to connect to View Composer." I am specifying the user account is the composer service account that I created in AD called vcmpSvc, which has permissions in AD create/delete computer objects and is also in the local Administrators group on the server of composer. I'm using the correct password, checked by connecting locally on the server of composer with the service account and by launching a command with the admin elevation prompt. I tried the following formats for the user name:

  vcmpSvc

  domain\vcmpSvc

  [email protected]

  In addition, the SOAP port was 18443 (unchanged from the default value) and the firewall is disabled on the server of the connection and the composer. What Miss me?

  Too bad! I solved it. It turns out that the composer on Windows Server installation has failed. Everything seemed fine, but when I looked in the list of services in order to check that it was starting well, I saw that he was missing completely. I installed new composer and everything works perfectly now.

  I hope this helps someone!

• View the connections of the server to connect to the Security Server 5.2

  So, I wonder if it is anyway possible to not expose a subnet of office to the DMZ during the deployment of a security server?  I think remember me, there was a way to have the tunnel of security server all traffic through the connection to the server, but for the life of me, I can't seem to understand.

  Even in your previous PoC you should always have allowed some ports (PCoIP, RDP if use you it and the frame channel) from the server security for virtual offices. This has always been the case.

  The role of the Security Server is to protect exposure of desktop to the Internet. It provides a monitoring of protocols of the Internet (for example PCoIP) so make it succeed to check if the traffic is in the name of an authenticated user, and to ensure that if it is valid, it is transmitted over an office whose user is authorized to access. It is important to configure your internal firewall so that Office (PCoIP etc.) protocols can come only security servers. Then you give the required insurance. If such packets only packets UDP PCoIP arrive in your DMZ that are not on behalf of an authenticated user and then they are ignored in the DMZ without ever be passed in your data center. You know that all protocols for virtual desktops have been validated by the Security server.

  The Security server should also communicate with the login server and that's why you should also allow JMS, AJP13, and IPsec through. These should be only to the servers again only from servers to security and connection.

  You can always route the PCoIP packages through a proxy in your data center, but the security required inspection happens before that the Security Server so that eventually they can be thrown into the demilitarized zone.

  Mark

• "No connection to the server of VR: does not not." after upgrade to vSphere 5.5

  As part of the upgrade to vSphere 5.1 to 5.5 along http://kb.vmware.com/kb/2057795 I've updated vSphere replication to 5.5.0.0 build 1309877. All rehearsals continued well then. I only add the new vCenter replication and it stopped for the old.

  After the migration of all VM including device just RV improved another 5.5 ESXi host I upgraded from original host and migrated the back of some VM. I noticed that only this VM is replicated again then. All other zeroes had "no connection to the server VR: does not not." and "Violation of RPO" messages (including RVS). If I migrate the original replication host virtual computer is restored. If I migrate to another connection from host to the server of VR is lost again - no matter what a host running VR.

  Any idea, please?

  Yes, it's possible, but I just wanted to rule out any more simple explanations first. I was worried especially when you said the VR server could not ping itself, but perhaps I misinterpreted what you were saying.

  In all cases, you can verify if this is your problem by looking for a line like this in the esx.conf of the hosts that you upgraded:

  / NET/vmkernelnic/Child [0001] / tags/4 = 'true '.

  If so, remove the line in the esx.conf and restart the host. Then, once the host is back, check that the network adapter assigned to the vmkernel is an accessible IP address.

  In my view, that the part "child [0001]" may be different on certain configurations if you do not find the exact line I've specified above, check around the lines part of [another] child.

• vCOP URl not start 'unable to connect to the server.

  I have deployed VMware vCenter Operation Manager version 5.7.1.0 on the ESXi 5.0 U2 Build #914586 host machine. Two virtual machines (VM Analytics & UI VM) are lit under the VAPP but vCenter URL of the Manager of the operation does not start and invites 'impossible to connect to the server' browser error message.

  Please help...

  Since it is a whole new setup I recommend the vApp redelpoy and try again.

  The other option is to connect to the vm user interface and check the logs for anything suspicious.

  Thank you

  Alex D.