Ini file stores your workspaces customized to Captivate?

Similar Questions

• using the .ini file created by EXE

  First of all I would like to say that I have a thorough knowledge of the .ini files and the need for them.  My question is related specifically to the .ini file that is created with the executable.  I searched the forum but have not found any instance of my question specifically.  After installation, the .exe and .ini are placed in my working directory in Program Files, which I expected.  The .ini file that is created is attached.

  Now, I would like to point to a different .ini that stores control settings.  I did it in the App generator under Advanced > Use Custom Config File.  That's fine and dandy, but the network, web, settings etc that have been created in the original .ini does not get included in my new .ini.  If my option is to use an .ini file separated with my control as well as created by the .exe parameters.  This seems redundant.

  My question is: does nothing my executable with the .ini file that is created when it starts to run?  I'd be OK NOT to have attached items if I wanted to point to a custom .ini file?  Why create an .ini with these specific settings file if the .exe does nothing with them?

  The only article I found is this one

  http://digital.NI.com/public.nsf/allkb/5467F7D7895835C186256FAF00600A21?OpenDocument

  but it does not explain what the .exe is done with it, if anything.  I guess you have a total control over the .ini and there is nothing "automatic / backstage" going on here.

  Thanks in advance for your help.

  Why remind you the application builder to a custom INI file if you are going to have to read the chips inside manually anyway?  The reason to use a custom within the app Builder INI file is so that you can include specific parameters of execution (VI, access list server, port etc.) which are different from the settings using the LabVIEW development environment.

  You need not key in the INI file for your run-time application (as evidenced by the fact that if you delete the INI file, your exe will still works, creating a new INI file with default values).  If you leave the defaults, the application adds in the first leg in any case.

  You can store your own data in the same INI file used by the executable file; just put the keys in a different section.  LabVIEW Config File format INI files screws slightly differently (for example adding spaces around the = sign), but I didn't know it causes problems.

• When I try to change an .ini file in a folder of the game in program files, Windows 7 tells me I don't have permission and "contact your administrator." Guess what, it would be me. What should I do now?

  I tried to activate the debug mode for Baldur's Gate 2: Shadows of Amn , so I go into program files, I find the .ini file that I need to change to enable the debug mode. I change it, so I try to save him. "You don't have permission to save in this location. Contact your administrator to save in this location. "I do not understand that I am the administrator of the machine! What is the problem! Please help me!

  Press the Windows key, type in Notepad, when Notepad is displayed in the list, do a right click and click "Run as Administrator". Open the file using Notepad and save after you make changes.

  While you are the admin, some features are always locked and need you to check if it is correct. What if all could do whatever he wanted this to be a problem. Confused, but safer, I guess.

• How Thunderbird keep track of where it stores your messages?

  I am writing a program to isolate some of the messages to a message queue. Of course I can hardcode the path where messages are kept for the moment, but when the user changes this, my program will be lost.
  I looked in the registry and profile.ini file with no luck. Someone knows the answer? Thank you.

  The path to the messages in Thunderbird is random just for the reason why your having trouble. To make the programming of nontrivial.

  As you would have observed the profiles.ini contains a path the the root of the profile.

  In the mail profile is stores in profiles\imapmail for profiles\mail for pop or IMAP

  Subfolders exist for the server of that mail is, often with a tail number to separate multiple accounts on the same server, or multiple attempts to implement the same account.

  These files can contain new subfolder. According to structure internal folders in Thunderbird.

  If the user has specified a custom for an account folder location, this information is stored in the file prefs.js and all other preferences. The account that the setting is referenced numerically. If you establish preferences, which is the account number, before the reading of the preference for the location.

• problem updating the ini file ini file

  I get the ip address of the user's input and to replace the old IP in the .ini to the last ip address file but the problem is when a user enter the IP and I write it in my ini file it does not at once, but if I do it twise in calling the same function of my command button twise then my ini file is updated , it is the strage iniwrite function returnes success although on first attempt. I checked with breakpoint, but when I do it twise, then it is done, please guide me in detail, I am really amayzed by this strange behavior...

  

  I already gave you the exact order of the functions in my previous message!

  Ini file tool generates an object in memory that allows you to store and locate the values. This object can be filled in reading a file on the disk; Similarly, it can be saved to a file on disk. This is the very first operation and the last to perform if you want a picture to date of your values on the disk. There are three layers to consider:

  1. The file on the disk
  
  
  2. The IniText object in memory
  
  
  3. The variables specific to your program

  With this in mind, the right order to update the file on the disk so that it reflects the value that your variables have in memory is:

  Ini_New create the object in memory

  Ini_ReadFromFile fill it with the contents of the disc

  Ini_get('sendmail_from') read of the idebugprogramnode2 memory in your program variables

  Here tou can update the values of program

  Ini_Put update the object of memory with the contents of your variables

  Ini_WriteToFile save everything on the disc

  Memory Ini_Dispose clear

  As you save on disk before you call the Ini_Put functions, the disk image is not updated

• Add Custom_Types.ini file types in LabVIEW (dynamically) palette

  Hi all

  Is it possible to dynamically add a Custom Types.ini file to the Palette of the Types of the LabVIEW VI. I tried some of the approaches as methods of "Engine.DisplayStepTypeEditorEx". But I really want to do fully automated without intervention. I want to specify the path to the ini file in my vi and add it to the range of types when the VI is executed from a sequence of TS.

  Can someone help me to achieve this goal.

  Thank you and best regards,
  Nitz

  You can simply place the file in your public folder TestStand under: \Components\TypePalettes.  Then when TestStand opens again it appear automatically.  You can check this by making a copy of MyTypes.ini (which is already in this folder) and rename the copy.  Then open TestStand and you will see the two MyTypes.ini and the new.

  Kind regards

• Open the ini file

  Hello

  I have a little problem years hope anyone can help me.

  I would like to open a *.ini file if I press the button, but the file does not open. can someone help me please?

  int CVICALLBACK LoadFile(int panel, int control, int event, void *callbackData, int eventData1, int eventData2)
  {
  switch (event)
  {
  case EVENT_COMMIT:
  OpenFile ('c:\\home\\My Documents\\studium\\File.ini",VAL_READ_WRITE,VAL_OPEN_AS_IS,VAL_ASCII);
  break;
  }
  return 0;
  }

  I'm not sure, what do you expect of the OpenFile() function to do?

  OpenFile() opens the file in a programmatic manner: This means that it provides a value (what you need to store it in a variable) which allows to read or write data from/to the file bycalling file such as ReadFile() and WriteFile() manipulation functions. It will NOT open the file in your favorite editor!

  to open the file in the sense of the word Windows User Interface, use the OpenDocumentInDefaultViewer() function.

• What is a "desktop.ini" file and why it is part of every folder on my drive network hard?

  I have Windows vista (64-bit).  I have a WD HDD connected to a linksys E4200 wireless router. I created a music network hard disk, and every time I transfer or rip music to this reader, this "desktop.ini" file appear also in the context of each case.  Is this OK to delete this file?

  Desktop.ini is a hidden file, use of Windows operating systems to store folder settings. For example, you have created a music library so desktop.ini will contain the settings to indicate to the user interface to display the files in the folder differently from a normal folder. It will also contain parameters of the custom icons and names.

  You can delete the file if you wish; point negative only consequence will be the loss of these parameters/customization.

  -Jason

• How to disable PLSQL (PLSQL = 0) in the sys.odbc.ini file in timesten

  Hello
  
  The one you suggest how to set PLSQL = 0 in timesten for the existing data store.
  
  I have already updated the dsn with PLSQL = 0 configuration in sys.odbc.ini file.and, I was quit all applications that are connected to the data store after that when I connect to the data store, get the warning below.
  
  Connect "dsn = TT_tt70_32; UID = onevoice; pwd = onevoice ";
  6226 WARNING: Ignoring the value requested for the first connection attribute "PLSQL' - value in use: 1, requested value: 0
  Successful login: DSN = TT_tt70_32; UID = onevoice; DataStore = / opt/timesten/tt7032/TimesTen/TT_tt70_32/info/TT_tt70_32. DatabaseCharacterSet = AL32UTF8; ConnectionCharacterSet=US7ASCII;DRIVER=/opt/timesten/tt7032/TimesTen/TT_tt70_32/lib/libtten.so; PermSize = 40; TempSize = 32; TypeMode = 0;
  
  Since the message above, I have had attribute PLSQL, we could set only the first connect to dsn. But now I need to update PLSQL = 0 because now that is already in use.
  
  Is it possible or not?

  It is covered in the documentation. Once PL/SQL is enabled for a database you can not turn it off. You must delete the database (ttDestroy), and then re-create the database with PLSQL = 0. of course, you will need to keep all your happy data (using ttMigrate) you drop the database if not you will lose everything. And this is only possible when the database is not in use by applications.

  Chris

• CAN´t to find the TOCStrings.ini file

  Hello everyone, I need to locate the menu table of contents, but I can do not to find TOCStrings.ini in the folder of my instalation Captivate 5.5, Win 7, 64 bit. Please, can someone help me?

  Thank you very much

  Yarik

  Hello

  I never found such a string, not even in previous versions, there is not by default, but you can create your own ini file. Check this blog:

  http://blogs.Adobe.com/Captivate/2009/02/changing_default_captions_in_t.html

  This type of location should be really easy. If you have the time, fill a feature request

  Lilybiri

• where is iWeb files store in OSX El Captain v. 10.11.2?

  where is iWeb files store in OSX El Captain v. 10.11.2?

  Can not find any directory under the "Library - Application Support" iWeb as suggested a few comments on the internet.

  Furthermore, can someone advise how to download the web site created by iWeb to internet, I tried "upload" function of iWeb and he just direct me to log on to the iCloud account.

  Thank you very much

  If you use a Mac with El Capitan, then there will not be any store for iWeb, because new Mac which not been shipped with iWeb for a long time.

  However, if you happened to load iWeb on your Mac from a disc, and then iWeb stores files of domain.sites under your user/Library/Application Support.  / Library/Application Support is the library system and you won't find anything here .

  To access your library from the user, you must click on the menu go upstairs and then press the 'alt key ' to your user library, but you may create, as the Mac ship automatically with iWeb, as has been the software not supported for the last 4 years or so now.

  To publish a site on the web, you need to get an account among many hosters autour - GoDaddy web hosting etc.  If you don't have a hosting account, that means first to register a domain name of your choice and then to buy the hosting for this, you will not be able to publish.  iCloud offers no accommodation, only a storage.

  Go to GoDaddy and register and domain name and purchase hosting and then download your site.

  Maybe you should consider new software also, like iWeb is old and not taken care of, then take a look at EverWeb instead.

• Satellite Pro 6100 - invalid boot.ini file message at boot

  Hello

  Don't know where to start.
  I want to just run Office 2003 from my Satellite Pro. Had problems with the HDD so I decided to format using the recovery discs.

  Now, when I start the machine initially I get the following message: * invalid boot.ini file. Starting from c:\windows.*
  After a minute or so, the following message appears. * missing or corrupted system32.hal.dll file *.

  Any ideas how to fix this please?

  Hello

  Looks like the laptop cannot start the Windows operating system and a few files damaged or are missing.
  In your case, I would try to reinstall new OS.
  Format the whole HARD drive and try again.

  If the second installation does not help, then a HARD drive should be checked may be that you need a replacement.

  Welcome them

• Access to the php.ini file

  Hello

  I tried to get access to the php.ini file. But I always get the answer: 404 the/etc/php/apache2 requested URL was not found on this server.

  The path is: https://192.168.1.101/etc/php/apache2

  ReadyNAS-102, SSH is enabled, OS 6.2.5

  With witch tool and how do I open the path to the php.ini file?

  Thank you

  Thomas

  Thank you for your help.

  I made this way, but I suggest to use WinSCP instead of PuTTY. WinSCP is also free and much more comfortable than the PuTTY.

• Noise DC value of the ini file values

  Hello

  I am trying to build a generator of signals (sine, triangle, sawtooth, square random noise, DC). I managed to get the job of waveform using the signal generator of NOR built based on VI. but I want to add the DC case that I managed to do. but I want the values (magnitude and frequency) to be in an ini file. My idea is manual sets the values in the file, once I run the vi and select the case of DC noise, it should read the file values and the data output and once I have stop, it records the values of dc before returning.

  So, I'm stuck trying to figure how to do this. I hope that I was clear enough. I don't have a code to view since I haven't started yet coding on this part. Help, please.

  Clearly enough explained.

  Take a look at the screw configuration file, found in e/s from file > Config File live. There also many examples n the community, as well as in the Finder of the example, illustrating the use of these. A good starting point is the sample Configuration settings file write example Finder, and reading Configuration settings file.

  Your .ini file will look something like this, once created:

  [DC noise settings]

  Amplitude = 1.234567

  Frequency = 8.901234

  This is equivalent to:

  [Name of section]

  Key 1 = value

  Button 2 = value

  When asked to read a specific key in a certain section, VI only through the file for the named section, and then search for they key the name you provided it. Remember, you will need to know what type of data is when you read back.

  You can use VI writing to modify specific keys in specific sections as soon as you close the file.

  This is one of a multitude of methods, you can use to do this, but are probably the simplest.

• INI file with the characters multibyte to the language question

  Hello

  I am doing research on several language support in our CVI programs.
  I'm new to programming multibyte, as always I coded it in English so far.

  I found the Interface Localizer and have played around with translating my GUI controls. That works well, except on the title bar that is displayed in one code other than the language, I translate. But it will not work for messages popup or dynamic views.

  I read a few white papers. I'm not too worried about Run Time messages, for the most part, I'm worried about specific incentive program and the GUI.

  I've seen several topics suggesting using an external INI file to translate specific messages in my program. So I tried to create an ini file that uses Unicode and a Chinese character.
  When I call Ini_NumberOfSections using this INI file, my software returns a number of sections 0 when there is, in fact, the 1 article. This happens if I format my INI file in any format other than ANSI, Unicode.

  So my question is simple: how to read an INI file and specifically the tag, using characters to multibyte to Unicode?

  Is this a setting? Or I have to write my own read INI and the analysis of function?

  Thank you very much.

  Ok

  I finished my first step in the R & D. Here's what I know:

  I tried several formatting options, including XML, TXT, CSV and XLSX (Excel).

  With the help of the CVIXML is not an option (the less the way I tested it) since it does not accept Unicode in CVI. I did a little research and found out how to configure my XML file to Unicode, but whenever I try to read using CVIXML, the result is a failure. So I gave up this process.

  A .csv file is not a good option, because of how the file behaves in Excel. With characters Unicode, the file does not open as expected, and all my data is in the first column. If you are strictly using a text editor such as Notepad, you can read the .csv file and use it in CVI. The only issue is that you must compensate for the multiple byte characters, which I did not. So, because of the tampering of the .csv, I eliminated it as an option.

  So here's the solution I came up with that. I use the Excel Report commands (via excelreport.fp in toolslib).

  Using this method I can format my language options in Excel, view my Unicode characters and still open as planned in the CVI.  I just have to open my Excel file and load all the options of language in memory, and then close the Excel file.

  The only caviats are speed and Unicode does not appear correctly if your operating system is configured in a non-unicode format. This isn't a problem but it's a windows setting. In my typical American, unicode characters appear as? But if I change my localized language to, for example, Chinese then unicode is displayed normally.

  So, for now, this is the solution I've identified. Thanks for the tips. I hope that others will find it useful.