Initial charge

Similar Questions

• Spectrum HP X 2 13: duration of initial charge of HP spectrum 13 X 2

  Hello

  you just bought a new spectrum of HP 13 X 2 which should arrive in 4 days and I wanted to know if there is a load time initial or do not see that I'm mixed messages looking for an answer online.

  Hello @Oshry,

  I read your post about how you're wanting to know if there is an initial charge time for your laptop, and I'd be happy to help you in this case!

  According to DavidPK, an Expert from HP on the forums:

  "The first time you charge the battery, I would leave the AC adapter plugged in for at least 3 hours after that it shows to be charged fully (100%).  After that, just to recharge the battery in the normal way.  Lithium-ion batteries are better maintained by charge when their charge level drops to about 40% of their total capacity. »

  Reference: http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/charging-laptop-Battery-for-the-first-time-after-more-the-6/m-p/605227/highlight/true#M22810

  I hope this helps!

  Best regards

• My CS5 serial number no longer works. Should the initial charge be struck out?

  My mac has been cleared and had a clean install with el capitan. My extended version of CS % CD serial number no longer works. Should the initial charge be registered? If so, how?

  [Left the lounge general Forum for a place that is more likely to be able to help and short title - Mod]

  Just to give you a bit of a warning, likely of CS5 does not work on El Capitan without issues - according to which apps you are trying to use.

  If you disable your software before wiping the machine, you will need to contact Adobe. You will need your serial number or the handy Adobe Identification Code .

  Before you get much too far away from yourself, you could consider to put back your old operating system on this machine so that CS5 will actually work without problem. (Or just to get a subscription to the CC. It includes CS6, CC, CC 2014, CC by 2015 and whatever they call the version that just came out two days ago...)

• How to make an initial charge followed a change of replication to the same process of the user (Java adapter) output?

  I need to:

  -Complete an initial load from an Oracle database to a user (process Java of an adapter) output process, with:

  TABLE..., SQLPREDICATE "FROM SNA... » ;

  -Then start a normal change of replication from the SNA for the same output of the user process, for example with:

  Register extract... RCS container (...) database...

  Add extract..., tranlog integrated, Yvert...

  I also need to have a clear dividing line between the end of the initial charge and the beginning of replication of change.

  That is, I need to know when the initial charge ended replication in the output of the user.

  I can do the initial charge and the work of replication of change, but I can't figure out how to do the two processes feed at the same exit of user procedure.

  It is because of the initial charge producing "extract files", compared to the extract of change generating the "path of the files', and those who cannot be loaded by the same process of output to the user.

  I don't understand why there is such a distinction and limitation.

  Is there a way to extract initial loading of writing to a log file, which could be picked up by the extract of change?

  If I could turn the extract files into files of trail, that would solve most of my problems.

  I believe that those who have exactly the same file formats (as is from logdump), and the only difference is that tracks have an additional checkpoint file. My understanding is correct?

  Is there a hack that would allow me to turn extract files in a path?

  Thanks in advance for any idea,

  --

  Romain Lenglet

  Roman. [email protected]

  1 do the initial load and wait for it to complete. Let's say the initial load generated more trails

  / tmp/ab000000

  / tmp/ab000001

  / tmp/ab000002

  / tmp/ab000003

  2. stop the initial load snippet once its done.

  3. set up an excerpt from capture of change online and mention the same prefix for trail

  EXTTRAIL/tmp/ab

  Now, the important thing is to let the extract online from sequence 4 and we do this with the following command,

  ggsci > Add ext ,...

  ggsci > add exttrail/tmp/ab, seqno 4, ext

  When we add the checkpoint of trail, we ask the extract from the sequence 4

  You can then start out it online and it will send sequence 4.

  4 then add and start an extract from pump to read the sequence 0 trail and run with PASSTHROUGH

  Thank you

  REDA

• HP laptop laptop 15-r219nx: Initial charge time

  Hi all

  I recently bought a new computer hp 15-r219nx laptop and I just want to know the initial load time.

  Hope you can give me some advice.

  Thank you and God bless everyone.

  Hi Jhon14,

  Most laptops will charge fully in about 2-3 hours. Advances in the technology of laptop battery, you don't need to load 100% before the first use:

  Lithium-ion batteries are more effective than rechargeable batteries nickel based and go through a training process during manufacturing. They do not require the IPL before use. (HP Notebook PC - understanding Lithium-ion and smart battery technology)

  We also have a document containing recommendations to improve battery performance and the longevity of your laptop, if you are interested: improve the performance of the battery (8 Windows 7, Vista)

  I hope that helps! Enjoy your new laptop!

• Initial charge of blackBerry Smartphones. Purchase of a new

  Can someone tell me if there is a specific length of time that the storm should be charged for before I can remove the adapter from the wall? I heard that the storm needs at least 4 hours of continuous, not interrupted load. Is this true?

  Hi and welcome to the forums!

  Here is a great link on the optimization of the battery and load by JSANDERS:

  The new lithium batteries are addressed.

  Thank you

  Bifocals

  http://www.blackberrynews.com/2008/05/20/battery-use-tips-for-your-maximum-battery-life/

• Netbook Lenovo S100 need 8hours initial charge battery?

  Hello. Just got my new netbook Lenovo S100. Staff at the store told me to charge the battery on his first indictment for 8hours. It is necessary to do so? Some problems it shortens the battery life.

  Another issue is that a good idea if we load the battery even when the battery is half full?
  Thank you...

  

  my personal opinion, no need to charge it for 8 hours, just charge it until the battery is fully charged.

  http://Forum.Lenovo.com/T5/welcome-FAQs-Knowledge-Base/How-can-I-increase-battery-life/Ta-p/244800

• Initial charge of small targets via flashback query tables?

  A simple question.
  
  Scenario: I am currently building a warehouse near real-time, streaming some basic facts and tables between two databases. I'm considering creating a simple "reset" package or reset the dimensions a fix all-out for various scenarios of problem (because they are really small, like the 15 000 lines of each). The first time I loaded the target tables, I used the pump data with good success, however as reloading of data streams on the full path transformations is a bit more complex.
  
  Considered as a solution: I'll just write a nice via db flashback query - bind a specific (recent) SNA data recovery and then I reset the table on this SNA in streams...
  
  Is this a good idea? Or is there something obvious like a yellow and green elephant in the gift shop that I forgot? Why I'm worried at all, it's because in manuals, this solution is not mentioned among the means of support to the initial load of a target table, and I think that there is a reason for this?

  Yes.
  I think that DataPump is regarded as more "mainstream" because that's what the implementation internal functions simple stream in dbms_streams_adm.
  However, any approach that gives you a consistent copy for a known SNA will work, and the document is not clear about this.

• How long the initial charge is necessary for a newly purchased laptop?

  HP DV6 - 6c06tx

  Simply connect the power adapter to a power outlet servant. When supported color power led will be amber when it is full, it is white (offer). When the power led goes in white color, it's done. He does not long to load completely on a new laptop, because each laptop model has different components.

• Initial charging base

  So, we want to move the data and start the synchronization between two databases.
  The idea is to create two clips (one as a data pump) and replicate. Start the excerpts run expdp (via flashback_scn) + impdp and then start the replicate.
  
  My question is how we can say the extract from the SNA?
  Because there could be conflicts of the time began to extract and the expdp began...
  
  Thank you.

  Please see the tutorial:

  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/FMW/GoldenGate/11g/GGS_Sect_Config_WinUX_ORA_to_WinUX_ORA_datapump/GGS_Sect_Config_WinUX_ORA_to_WinUX_ORA_datapump.PDF

  All the tutorials for GoldenGate:

  http://Apex.Oracle.com/pls/Apex/f?p=44785:2:1105185458422201:FORCE_QUERY:2, CIR, RIR:P2_TAGS:Goldengate

  Apress book:
  http://www.Apress.com/9781430235668

• Skip the initial charge? (existing synch filled with tables)

  Hi all
  
  I'm pretty new to GoldenGate and I was wondering if the following is feasible or not.
  + (The title is quite irrelevant, but I didn't understand how it the sentence correctly). +
  
  Let's say that:
  I have a data source named DB_1 (Oracle 11 g 2) with a schema ME with 2 tables T1 and T2.
  On the source, there is an excerpt from goldengate who manages the changes to the schema ME.
  An export of goldengate send the exttrail to the remote server.
  On the remote server, there is a goldengate replicat which applies the changes to the schema database (Oracle 11 g 2) DB_2 ME.
  
  I can:
  -stop the extract, the pump and the replicat on the database:
  -on the source database called DB_1, remove table T2 and replace it with a new one (same name) with the same structure over a few columns and insert some data into it.
  -recreate the goldengate extract and pump on the source database.
  -make an oracle datapump export (expdp) that includes only the table T2
  -Remove the T2 table on the target DB_2 database
  -import datapump to the target DB_2 database dump
  -recreate the replicat goldengate (with HANDLECOLLISION) to let the two *(<--this is the step I'm not sure that would work) of resynchronization of table *.
  
  NOTE:
  -No DDL or DML does T1 table during all the time +(so both on source and target will be exactly the same) +.
  -I can't use goldengate DDL functionality because the source and target tables do not have the same structure (more columns on target db)
  
  
  Not sure that I'm clear +(English is not my native language) +.
  If this feels confused, feel free to ask for clarification.

  It's OK - for DDL replication, structure must be the same. You does not say that the tables are different at first, but only after the change. That is why (if you have configured it) DDL on the source might have supported the operation moving. The create table can also make the copy on the target, and then on the target, you can manually add the new columns. Or, forget the DOF and manual to create tables on both ends. Structure of the index does not match (this is why there is in some cases, replication: different unloading of reports to a database, you have different or extra index to support the declaration).

  If you do not mydata_swap in your settings files, it is ignored during the spin cycle. You could create a separate process for her group or eat the downtime of the extract to add it to an existing process group. Unless you have a dynamic resolution enough he catches the new table, as in
  TABLE hr.my*.

• Initial battery of MacBook Air

  Hi all!

  I just bought a Macbook Air today, and I have not turned on yet. To maximize the life of the battery, how many hours of initial charge is recommended?

  Thanks in advance!

  Load until it turns the green light on the connector.

  https://support.Apple.com/en-us/HT204054

• ThinkPad tablet charging 2 or power problem

  I was on vacation without my Tablet for several weeks, and since I came back, I was unable to turn on the tablet. I assumed that the battery had drained while I was away and plugged in, but there is no indication that he is in charge. When I push the power button, the Green led blinks 1-3 times, but it does not turn on the tablet. By pushing the reset button does nothing.

  Anyone know what could be the problem?

  Make sure that you use the charger in stock, I couldn't get the initial charge with something else

• My Acer laptop says "plugged in, not charging."

  Yesterday, the light on the front of the computer which is usually blue, blinking orange light.  When I click on the plug/battery icon I get the message, "plugged in, not charging."  Do I need a new battery?  My laptop is less than 2 years.

  Rated capacity	47520
  Full last Charge	36018

  Hello

  This report shows that the battery still has 75% of the initial charge capacity. This means that the battery probably not causing the problem with the projection of light load and plugged him, don't not supported message.

  I would recommend that you knew down and unplug the phone. Remove the battery and make sure that there is no dirt or residue on the contacts of the battery or the contacts inside the battery compartment.

  Reinsert the battery and see if that fixes the problem.

  If this is not enough, check out the following links for more troubleshooting.

  Solutions to common battery problems:

  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?

  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  Battery meter: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  You can check with Acer for all known problems with this behavior on this model of laptop.

  Acer Support - Acer Support: support & downloads Documents - family of products: http://support.acer.com/us/en/product/family.aspx

  Acer Support - answers, E-Mail, Chat - find answers:

  http://Acer.custhelp.com/app/answers/list

  Concerning

• BlackBerry Smartphones Blackberry Bold 9790 initial load

  Hey everybody I have now my new phone and the question I have is, how long should take the initial charge?  I have read several posts on other sites, and some say two hours, some say from one day to the next.  Thoughts?

  Charge it to 100%... you can not load beyond 100%.

  Whether it's 30 minutes or two hours.

  It is not really important with these Li - ion batteries. They do not have the "battery memory" of the past. "