Initial problems of development

Similar Questions

• Thread: Problem of development: I have 1600 line query

  The problem of development: I have 1600 line queryy but report generator 1320 lines. But I m cannot create views because many parameters is used in it please give solution how can I paste line 1600 report bulder.

  Yet once, by using functions to replace subqueries or views seem to average achievable.

• The ISCSI initiator problem

  Another problem of beginner.  I learned a lot about my new virtual world, and the box Logic Equal Dell.  But I still have a fundamental problem that must be an easy fix, or something I do not understand from a technical perspective.  I want to be able to connect to a snapshot and be able to recover a file if necessary.

  I brought the snapshot online and I could even get on vSphere so I could see him there.  But, for the life of me I can't all iscsi initiator to see the snapshot at all.  I have a few guesses, but I can't seem to understand my problem.

  I can't get the initiator to see all the targets... it just tells me the connection fails.  I think I know why, but my skills of network management are not real strong.  When we had an outside company come in and set up the environment, they put everything on 192.168.100.x or 192.168.101.x.  Since I arrived here (more than 15 years ago), our network has always been 129.1.x.x ip addresses.  I'm programmer for the most part and I got a guy of networking which is solid to the networking but I don't know if he can answer my question either.

  In any case, when I try to add my portal target to the initiator, what IP address or the name am I supposed to point to?  I can't ping the 192 addresses because I'm on an IP 129.1.x.x, correct?  So, this is why I have no chance to find snapshots using the initiators?  I know the vCenter server has an address 129 and the SAN itself has a 129 address and I tried to connect to who but did not work.

  I think I gave permission to the snapshot to be seen by several initiators.

  I think it's my lack of networking, but maybe not.  Any help would be greatly appreciated.

  Thank you

  Ryan Kotowski

  The snapshot will not be a set of files that you can view. This will be a copy of exactly what the LUN looked like when you took the photograph, you need to mount it in vSphere just like you would ride the regular LUN. Then you will see all the VMX and VHDX files for virtual machines that you instantly. Then you can add one in vSphere and power to recover his files. Don't forget that you'll want to disable networking all on this virtual machine so that it is not in conflict with the actual VM on the network.

• Display problems in development in a new installation of Lightroom

  Good evening

  I have a small problem in my fresh installed Lightroom CC under Windows 7.

  I think the best way is to show what I mean:

  

  The Original (corner left uppre) is nice, but in the Center it looks terrible.

  This happens to every photo I want to open in the developer...

  Can someone help me please?

  Thank you!

  And excuse my bad English

  Uncheck the option preferences > performance > CPU graph use.

• create a new user with password expire - problem SQL Developer

  Hi people,

  I use RDBMS 11.2.x on Solaris and Linux, and in the face of a problem that I hope someone can help me with.

  Our policy is to create a new account with a temporary password and force them to reset the password at the first login.

  Therefore, I use: "create user < username > identified by < user > password expire...» »

  The problem is that many users use Oracle SQL Developer and do not have access to SQL * more.

  When I user logs in the database for the first time in SQL Developer, he just tells them that the account is locked.

  It does not say the password is expired, and it does not give them a way to change this (that I can find it).

  I'm not familiar with SQL Developer and hoped for someone who has had a similar problem can offer some suggestions.

  Thank you.

  Jim

  Change password dialog is no longer Pop Up after ORA-28001 (password expired) (Doc ID 811736.1)

• Use of the JRE instead of JInitiator causes problems of development of mouse for Oracle Forms

  Hi all
  
  We run Oracle Forms application based using JRE instead of JInititor.
  
  (1) the application is run on an individual laptop with Windows XP SP3 as an operating system.
  (2) with the help of oc4j of Oracle Developer Suite 10.2.0.1.0 to run the application
  (3) JInititor is more used and JRE version 1.6.0_26 or JRE version 1.6.0_27 used to launch the application. It works very well.
  (4) the browsers used to access the applicarion are IE8 and Mozilla Firefox 8.0.1
  
  Questions:
  (1) cannot have the focus of the mouse on an item. Even when the cursor seems to be in another element, for example after ctrl + E, point B article content watch editor has (which is the first on the form).
  (2) the LOV on any item shows what brings the LOV on section (first one on the form).
  (3) we are forced to use the keyboard to access the respective item all the time.
  
  Can anyone suggest a solution to this problem?
  
  Kind regards
  Aparna

  HELO,

  You, normally I think shoud upgrate to the version of forms 10.1.2.3,.

  François

• Problem SQL Developer and GeoRaptor

  Hi all
  
  I installed sql developer version 1.5.0.52 and in a schema, I have space, but like geo raptor data in not installed with sql developer if I'm unable to see the spatial data.
  
  In order to see the spatial data so I installed Geo Raptor as below:
  
  Click on the 'Help' menu item and "check update".
  
  2. "Find updates - welcome" dialog box
  
  Click on the Next"" button.
  
  3. dialogue "Check for Updates - step 1 of 3: Source".
  Add the new Update Center. Click on the 'Add' button and insert values:
  
  Name: GeoRaptor
  Location: http://georaptor.sourceforge.net/install.xml
  
  And developer sql update successfully, but after the installation of Geo Raptor so I am unable to find the Geo Raptor tool in SQL Developer.
  
  Could someone help me please why Geo Raptor tool is not dispaying in SQL Developer.
  
  Thanks in advance
  Vipin

  Vipin,

  I am one of the developers for GeoRaptor.

  I notice that you use version 1.5.0.52 SQL Developer.

  The current version of SQL Developer work with version 2.1 and more.

  Download the latest version of SQL Developer (I run version 2.1.1.64) and reinstall GeoRaptor.

  If the installation is correct, you should see a menu entry GeoRaptor to the pillar of the view menu. In addition, you
  should see GeoRaptor commands on the right mouse click menus on columns of tables/sdo_geometry.

  Let me know if you still have problems.

  concerning
  Simon

• New problem has developed. I go to a site (my bank account) and try to open the print icon. It flashes for a moment and goes. Also happens other places

  Occurs on several sites. My banking site - when I go to my account and then try to click on print a Bank Reconciliation window flashes and then goes. My health care provider site - went there today and I tried to click on the "explanation of benefits" related to the visit of a doctor. The link appears and disappears immediately.
  Problem just started a week ago.

  A new window starts to open and close? I get the same thing with the third link on this page:

  https://jeffersonscher.com/RES/PopIt.html

  I wonder if you have security-related add-ons that can detect and close the pop-up windows... Could test you mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  Any difference?

• Initial problems with my Qosmio

  Hi all

  Now please don't misunderstand here because I liked my Qosmio, it's good game power little. - but there are a few things that I was very unhappy and others I was impressed and have simply not had the opportunity to share with the community.

  First of all, I live in Christchurch, New Zealand, and you may remember that we had major problems with earthquakes, these are now installed but nevertheless relate to my story.

  Also related that I have a blood disease which caused damage to my skin over the years, leaving less sensitive most people are accustomed.

  First parts of displeasure.
  I bought my Qosmio, nine of Harvey Normans in Christchurch, I bought the extended warranty, the yards brand new... No problems; However after about 6 weeks, I finally decided to look beyond the image of the BIOS Toshiba reviews that see you when the machine starts up to read what was on my machine.

  (1) to my surprise and dismay I found out that my bios stated that 1 my 4 core CPU core was locked and that the BIOS was NFR (not for resale) that is to say the machine was supposed to be one that was released by Toshiba as a demonstrator, confused, that I talked to Toshiba New Zealand , who basically told me that it "was not possible and I must be mistaken", to research on the Web from Toshiba site, I couldn't find a BIOS version later.

  (2) I decided after using for the system that it was time to make a recovery and began in the recovery disc creation process, everything went well and I decided to do a clean cleaning at all, even if it would take some time, some time was certainly what he needed, I started on the first CD and started the process. 8 hours later I finally got a message pop up on the screen saying that the recovery had... failure of SIP. OH NO.. !

  I restarted the hard disk in the vain hope that it was a mistake on the part of the message, but it wasn't.
  Trolling the Internet on my desktop computer, I found a reference to failed drives to rescue & recovery for my model due to a fault in the creation of the disk.

  I called Toshiba who informed me the only way I could get the disks of rescue and recovery had to pay for them, I informed them that I already had rescue and recovery disks, but they did not work, they don't want to know - essentially pay up or shut up.

  I got my DVD of windows 7 and install it on my Toshiba using the serial number on the device that I caught from the recovery discs manually, decompression all drivers and install them manually as well, in the end, I had a whole system that works, no thank you recovery disks.

  Now these are not all the bad things, but I must say that the service I received from Toshiba SUCK!

  Shortly after that, we had earthquakes of Christchurch that killed so many people, at the time that their Commission that I had my Qosmio on the kitchen table and had prepared just a large cup of coffee, I sat or rather is dropped down as the earthquake hit - it was extremely violent and struck me on the floor. When everything settles I picked up myself - to find my coffee - all 900mls worth was now on the keyboard of Toshibas and biscuit barrel my wife kept on the table had fallen more to slam the back of the lid of the laptop and it has broken in two places; However, the computer was still ongoing! incredible.

  I very quickly stop the machine down and very gently at end it to the back corner to allow the coffee to drain on a towel. Although damaged keyboard soaked after I had dried the machine and dehumidified it I then ran it for a month to use it to manage our statement of claim - I have to say its a bit beasty Tuff.

  Now, a kind word for Toshiba, after them on incidents and curious about the status of the warranty etc, phoning told me that I should have my Qosmio verified and provided with a certified Toshiba technician said he was OK, clean to the top of the coffee and all repairs worked that "Toshiba would honour all other issues related to the guarantee based on own issues merit" I was basically shocked if their tech said that it was OK then, it was OK and my warranty would continue. So Bravo to Toshiba for a vision very fair to the guarantees.

  Now for the good, the bad and the dangerous plain.
  Finally a new BIOS has appeared on the support site, I downloaded it looking forward with impatience to unlock this core I was missing, I installed it and the system has restarted after you start Windows 7 installed some additional elements of INF files and I found that I had a couple of additional entries in the BIOS.

  After that my system has been repaired I had some more memory added to it by Toshiba technology, it also made me a working set of rescue and recovery disks that I was crazy, he did a beautiful job on the machine and it was back to looking brand new, into the new smell of tech.

• "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "was my initial problem.

  "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "It's my original problem due to uninstallation of a Netgear usb internet device programthen a friend got their hands on it: now, put on it goes to safe mode selection screen. the result options of safe in many hyper scrolling mode that reads - multi (o) disc (o) partition (1) windowssystem32drivers\ ___sys... then stops & starts up etc when in last known good config that worked or start normally the icons of windows screen is displayed every thing seems as it should, then it turns a shade of blue just 1/2 a screen of white lettering & bam his judgment in a Flash. Cannot read this fast.      XP sp3 Toshiba Satellite P305

  Hi chygirl,

  You can follow the solution at the bottom of the link:-
  http://www.GeeksToGo.com/forum/topic/270656-cant-boot-up-after-unistall/

• Problems of development.

  Tried to launch the development on WindAutomated tune-up on HP Support Assistant. Supposedly to keep your computer working at optimum. Impossible to find answers on the help of Support HP, so thoiught I would try here. Doesn't look like I get nothing better.ows 7 for the umteenth time, but never complete disk defrag, even after several hours.

  My humble apologies, I meant to click on the answer, but hit the one below by mistake. Realizing this I clicked on it again to stand out as the answer, I guess that react you & type very fast.

  It is always marked as the answer now.  :-)

• Having problems to develop the sense update

  Im a newbie to Lightroom, just Lr6 bought and installed.  A notice of update appears so I've updated, now, when I open develop I'm greeted with a large blue square with an x in the frame and can't seem to get rid of it.  Any suggestions?

  Disable GPU acceleration. Go to the preferences, click Performance, clear the check box.

• Before and after the problem - Module Development - Windows 7, 64-bit - Lightroom CC v. 2015.5 - camera raw 9.5

  I use Windows 7 64-bit, Lightroom CC 2015.5 Camera Raw 9.5 and the module development on a feature photo ' before and after ' does not work.

  He shows me the image changed, but not the original (I don't know exactly what another image "edited", it shows me).

  In the screen shot, you can see the pictures "before and after" and the one original overxposed.

  I hope I am clear enough.

  Any suggestion?

  

  Thank you :-)

  Click with the RIGHT button ON the import step in HISTORY (do click NOT just what this will change your photo AFTER) and select "copy history step settings to before.

  "

• Satellite P100-187 - initial problems (equipment)

  Hello..

  I have a Toshiba P100-187 with no warranty on it, so I'm in a bit of a slump here...

  I'm a technical engineer certified to another company which should be for the stay
  no name...

  The computer starts very well, but theres no picture during the boot or by post... but when it comes to
  Its all fine Windows and theres a nice picture on this subject given that it should be...

  Here is a list of things Ive has accomplished so far.

  Motherboard replaced (twice)
  Replaced the graphics card (twice)
  Update Bios
  Tried with other processors (I have access to several compatible)
  Tried with another RAM (I have access to severel compatible, also tried their single channel in two DIMMs)
  Tried with the new view (again, I have access to several screens compatible with this model)

  I think it is but I'm not quite sure what that maybe the motherboard is stuck in a kind of a demo mode. How ever, I tried to reset the motherboard on the connector JP8.

  Im trying to see if theres any gurus out there with the skills to understand this one cause I absolutely love my p100 (though even his orange) and I want him to live again...

  Have you tried to exchange experiences with the Toshiba authorized service provider in your country?
  I mean it's the best place to pick up some info on the base - exchange of information between colleagues. ;)

  BTW: what happens when you start laptop connected to the external monitor?

• Problem of development Visual Studio Console applications

  I have a doubt regarding the software.Coming of visual studio 2010 at the point, I always write in visual studio visual c ++ console application programs. At the final output in the console, I didn't see all the reports as the execution TIME, etc... Nor in the gcc compiler is to show the time etc... I need to know that, the feature is not available with visual studio? or there are changes to make to get the execution TIME, etc... in the console... ??? Please help me clarify my doubts. Thank you

  Hi Mary,

  I suggest you send the query on the MSDN Microsoft forum for better support. Check out the link to do so:
  http://social.msdn.Microsoft.com/forums/vstudio/en-us/home?category=VisualStudio

  Please do not hesitate to ask if you have any other questions about Windows.