Initial setup of the lab home

Similar Questions

• Lost the initial setup of the user and cannot find the files in the my documents folder

  Thread: Recover original original put in place on window XP
  Recenty my Dektop HP (Window XP) restarted with recovery application. In the end, I lost my original CD all the user settings and can not find all my files in my documents folder. Doesn't have, I lost everything or is there a chance to go back to my original game. If ysé how can I do. He is workin OK but have Setup every thing with 4 users.

  Hello

  I fear that the computer was set to the resumption of the plant, all data and settings will be lost.
  I suggest you contact the manufacturer for the recovery of lost files.

• Initial setup for the module of firepower, where start

  Hello world

  Ask your help once again, first of all, I've read a ton of guide as to the initial configuration, i.e., initiate the module fire power so that covered.

  Recently, one of our clients bought a new ASA with services of firepower, all is well and good, until I saw that on the nomenclature, it has SF - FP5.3.1 - K9.

  As far as I know, admins are who will begin the device, for example, through to bootstrap and OUR system software desired.

  My question is, what I really have to go v5.3.1? or can I just jump to 5.4? for example, to download the software "bootstrap" of 5.4 and 5.4 sys
  Note This is a new ASA fresh-from-the-box-with-the-smell-of-cisco ^_^

  Hi LJ,.

  In this case you can directly jump to 5.4 because she didn't have any configuration.

  Kind regards

  Aditya

  Please evaluate the useful messages.

• How to configure the network home wiFi with dlink router

  I need to create a home network using the dlink WiFi router
  a computer with Vista and the second with XP
  can someone tell me what havo to do to configure the router etc etc o give me same informamation on where I can learn to do
  I want just the old pc with xp for the server and the vista one customer but more importantly I need the file on XP to migrate under vista.
  Thank you very muche for your end of the patient cooperation
  in return, I give free cooking classes
  see you soon

  I'm not sure if you are asking how to set up a secure wireless network, if you ask how to share files between your two computers (and there is no "customer" or "server" in a working group, in a field - which is not), or both.

  So I will give you information on doing both.

  Router - configure manually

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.
  2. attach a class (usually supplied with the router) ethernet cable cat5e port Internet/WAN from the router to the ethernet port on the cable modem.
  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.
  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.

  Networking

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  XP - configure Windows to login automatically (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  Vista - Start ORB > Search > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.
  MS - MVP - Elephant Boy computers - don't panic!

• New HD - How can I reload the Vista Home premium OS

  My HD crashed, so I bought a new one.  How can I reload the Vista Home premium OS that was on the old HD?

  Hello TomNeumeyer,

  Your computer initially comes preinstalled with Windows Vista HP on this subject, the manufacturer?  If so, you will need to contact them to get an installation disc.  If you have a Setup for Windows Vista HP disk and a product key, simply insert the DVD and start the installation.

  Thank you

• After updating IOS 9.2, I lost all the Homekit settings. Cannot create the same 'home' once again, but is not visible in my Homekit settings.

  After you run the 9.2 for my iPhone IOS update 6, he seems to have lost all my settings Homekit. It is no longer my 'home' available in the Homekit parameters or in the application "Eve", or in the application 'Home' or the Insteon. Can not create new 'home' with the names I've used before, but not room for a list of people or to reset. Homekit does more work in my house.

  Initially, I SHADE (8) Phillips lamps and 6 Elgato Eve door / window sensors.

  Please help ;-)

  Noticed on my iPad (IOS 9.2 update) the Homekit settings are still there. Now trying to close the session and come back in iCloud in my iPhone, checking if it will work

• Can't see all networks wifi on initial Setup

  There was a problem with my original Touchpad (it does), so I sent to HP and just received my refurbished model. However, when I start the initial setup and it asks me to connect to a Wifi network, none appear, even if my network and my neighbors are all visible & active.

  My network configuration has not changed since my original Touchpad, which connected very well, so I don't know why this one should give problems. Any thoughts? It is extremely frustrating that I can still use my new Touchpad!

  Following my previous post, I called HP, explained my problem and they sent me a replacement. The new (renovated) came in a few days later and it connected to Wifi without problem. I proceeded to the initial installation and have no problem with this new unit.

  So, for all those who still have a problem with an inability to see any Wifi access during the initial installation points, contact HP and explain your problem. If you are able to upgrade to 3.0.4 use WebOS Doctor, do this and confirm that your Mac address is all zeros. This seemed to be the point of triggering of a replacement for me.

  Good luck to all! I'm going to use CM7 .

• How to access the clasic welcome screen in the modern home screen

  I'm trying to access the classic welcome screen in the normal home screen. I can not rember how to access.

  Can you please tell me how to access?

  Thank you

  -Elliot Labs

  In windows xp, you know how if you press Ctrl-Alt-Delete twice, he has the classic welcome screen. How do you do that in windows 7.

  Microsoft has removed this feature in Windows 7.

• Initial Setup was never released?

  I just got a new laptop computer and any turning, he asked for my location and time zones. but then the screen froze and a login screen appears. I do not even have to do the initial Setup, and he brought me to the login screen. Is there anyone who knows also that or is this just me? I don't know what to do...

  You need to reinstall Windows 8:

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press F8 on the keyboard until the Advanced Boot Options menu appears on the screen.

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

• VMware Lab home

  
  Hello

  I want to set up a laboratory at home that can be used to learn and explore the features of ESXi 5.1. I intend to install Workstation 9 then install ESXi 5.1 in one of the virtual machines in the workstation. Also I would like to install vCentre 5.1 Server directly in the workstation so that it can be used as an interface to access to and manage the machine virtual 5.1 ESX host and other virtual machines within the workstation. With this configuration, I would like to learn and explore the following features of ESXi

  DRS

  Fault tolerance

  VMotion

  SR - IOV

  To build this lab, I reduced the following configuration

  CPU - Intel® Core™ i7 - 4770S processor (8 M Cache, up to 3.90 GHz)

  RAM - 16 GB OF DDR3 MEMORY

  -Card mother Intel DB85FL

  OS - Windows 7

  Hard - SAS 300 GB drive

  1 Gb Ethernet NIC

  Is this good enough to support the above requirements/characteristics?

  Thank you and best regards,

  Mukz

  I think you should be fine with the material (although a SSD for the VM wouldn't be bad). In any case, I don't think that you will be able to use SR - IOV in the virtualized environment and FT may be limited to nested 32-bit clients.

  I suggest that you take a look at building the ultimate vSphere Lab to get an idea of how set up the lab and discover the discussions in nested virtualization (especially those who answered jmattson ) before buying hardware.

  André

• FMW: Portal Upgrade Advisor - video part 4 patch the Oracle Home "how to install Oracle Middleware 11 g Rel 1 portal and discoverer" should specify to use previous pfrd Oracle Home

  NOTE: from 'build base Middleware of Oracle 11 g Architecture. "
  Review of the videos for "How to install Oracle 11g Rel 1 portal Middleware and discoverer?"
  Part 4 patch the Oracle home (04:57)
  https://support.Oracle.com/CSP/main/article?cmd=show & type = ATT & ID = 1118681.1:PD11G_INSTALL_PT4 & inline = 1

  The verbal and demo explanation does not use the original location/Oracle HOme of the previously
  installed for the binary PFRD base.   It probably should.

  In addition, for some steps to follow to patch binaries PFRD, I'd put it:

  Step 4.  I am guessing that the patch will establish an another sub dir Disk1 and don't want to overwright
  installation of the initial PFRD, therefore, moves the Group of hotfixes as follows.

  CD/opt/web/install/PortalUpgradeAdvisor/pfrd
  960 ls - ltr
  Group of hotfixes mkdir 961
  Group patches 962 mv p11060983_111140_LINUX.zip
  Group patches 963 cd.
  Unzip 964 *.

  RE: of course, having unpacked the group created patches another subdirectory Disk1 with his own runInstaller
  VNC gui:

  I guess, all we are doing is patching of binary files, nothing should be running.
  Maybe an environment set in same, as when we ran last the PFRD install, however.  There we / I had
  run. / set_mid_clean after making sure the files property was oracle: oracle.

  Yes, VNC gui and
  / opt/Web/Install/PortalUpgradeAdvisor/pfrd/Patchset/disk1
  . / runInstaller

  Here again, we select Install Software - is not configured
  RE: Get the message again on this screen "installs the software only. After said is finished, use
  config.sh at ORACLE bin directory to configure the working bodies of these components installed.

  Specify the installation location.  Always to
  Oracle Middleware homepage: / opt/oracle/Middleware
  and
  An Oracle home directory: as_2 # I bet it must be as_1 because that is where the initial PFRD install binary files has occurred.

  NOTE: The summary of the Installation in the video screen escape the Oracle Home is the previous specified during the initial installation. That is to say. PFRD_Binaries.   I guess I should have named that instead of taking the default as_1. At least I would have to have done that.  Well.  Maybe this story might help the next guy.

  Also

  NOTE: The Installation screen is not "from" group of patches as in the video where it says
  Install Oracle Portal, forms, reports, and discover the Group of hotfixes.
  

  Hi Charlie
  I'm a little confused by this feedback. Especially when you say that you see the option "install - do not configure. Should this option is visible only when you run the Basic 11.1.1.2 PFRD the software installer. The Group of hotfixes 11.1.1.4 has his own 'runInstaller'... and this will display what you see in the viewlet. You definitely run the installer from the directory of stage in the Group of hotfixes? (I'll do my own validation test - if I find something strange going on... I'll report.)

  I now take the following action

  1. I will put the Viewlet so it is clear that the Group of hotfixes is staged in a different place from the base 11.1.1.2 media
  2. provide that nothing must be running (because at this point, no instance of 11 g of construction has been configured)
  3. There's a "slippage" that illustrates the Middleware and Oracle Home entries in the screen "Location of Installation to specify" IE

  Middleware homepage: / u01/alca_portal/middleware
  Oracle home: PFRD_Binaries

  However, you will see that this slide for 2 seconds (which is an error) and if you miss it probably.

  Just FYI - the House of Oracle 11 g correction is in general the same procedure as patching a mid-layer House AS10g i.e

  -You set the Oracle Home base using the installation of the basic software program
  -You patch the Oracle home using the installation program of the Group of hotfixes

• How can I get rid of the stupid home on my iPhone screen 5 now?

  When I press the button "home", then swipe left, my iPhone thinks I'm one screen other than my home screen there and an additional step to access the home screen. How can I get around this?

  Do not slide to unlock. This isn't how it works more. Press the home button, a second time.

• Firefox does not load the flash of the Firefox home page

  Firefox does not load the flash of the Firefox home page

  It's not Flash, but a film WebM.

  <video xmlns="http://www.w3.org/1999/xhtml" poster="data:image/png;base64,<base64 data>" src="https://snippets.cdn.mozilla.net/media/files/e29ada39-11f4-4157-ae1c-1340d9455692.webm"></video>

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• All of a sudden, the Yahoo homepage is different with Firefox. How to bring back the old home page? I prefer the one that is always displayed on Internet Explorer

  All of a sudden, the Yahoo homepage is different with Firefox. How to bring back the old home page? I prefer the one that is always displayed on Internet Explorer. I deleted Firefox and re-installed but the rest of the problem. Help, please.

  Well, it's a problem in your Firefox. To me this https://www.yahoo.com/ page looks like the screenshot of IE.

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Click the menu button

     

     , choose historic, then on clear recent history...

  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

• install problem - c:\users\ < NAME > \appdata\local\temp\7zS171C.tmp\setup.exe the dependency service or group was able to start

  I use Win 8. I recently uninstalled Firefox on C: and am looking to reinstall on F:

  I downloaded the installation package full https://www.mozilla.org/en-US/firefox/new/?utm_source=firefox-com & utm_medium = referral, but when I ran the installation package, I got a popup window after the extracted package:

  c:\Users\ < NAME > \appdata\local\temp\7zS171C.tmp\setup.exe
  The dependency service or group could not start

  Any ideas?

  You may need to temporarily disable your security software (antivirus).