Dell V305w printer will no paper feed
My new Dell V305w printer worked fine for a few weeks, but now cannot properly feed paper. He turns and seems to have trouble pulling the paper down. The paper sometimes goes down a few inches and the printer starts to print, but the book isn't far enough into the printing machine. Fortunately, the printer continues printing without paper and then she finishes, but nothing comes out. Sometimes it is said that there is a paper jam. I have remove the partially inserted sheet and try again. And once again. And once again. There is nothing hinder the wheels that I see. I use regular printer paper. I have the same problem with envelopes. It seems like the envelope begins to feed and then stops, as the wheel intercepts her. Sometimes the envelope will go through the printer, but the impression is going to be dragged in off the edge of the envelope. It seems that the wheels do not pull the envelope or the sheet of paper in the machine.
Justo something old... Take a couple of Q-tips, moisten them with rubbing alcohol, then try to clean the 2 grey rollers inside the paper tray that pull the paper when you try to print. Let the alcohol evaporate, and you're ready to go. Alcohol revives the surface of the roller which was not working because of the dust. Try to keep the printer covered to avoid this problem often. And there you go, fast and simple solution.
Tags: Dell Peripherals
Similar Questions
-
Dell V305W printer unable to print and remove items from the queue
Original title: Dell V305W printer
Cannot get my printer to work. the queue contains 2 documents. I can remove all but one. under status it says delete but it does not delete when I try to cancel it. all of the suggestions. Thank you.
I solved the problem. I turned off the computer and the printer and when I rebooted, I was able to delete the item in the queue. Thanks for your reply Zhang.
-
Reference Dell 926 printer will not print after installing Windows 7
After the upgrade to Windows 7 my 926 printer will not print. I followed the suggestions found here (unplug the printer on the wall, remove the brick, low load patch R166248 to delete the printer, the latest driver to load, R146832 dated 26/01/07, reboot). Restarts, driver going through complete installation process then I get an error at the end of the process, "the Dell Photo 926 Printer printer driver is not installed". I did this several times. In addition, I restarted the spooler to print several times. No luck. Additional suggestions on how I can get my 926 to work with Windows 7?
Greg,
I think that we all regret our first wedding, well most of us.
Removal of print jobs is a way of really nice to get rid of your documents. After you restart your computer, you should be able to run the fix, Manual printer removal driver and restart once more. Try it to install the Vista drivers in compatibility mode, I used Vista SP2.
Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Change Vista compatibility. Then, install the appropriate drivers. You will be asked when connect (printer)
To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.
Rick
-
My dell v313 printer will not print in color
I have a dell printer it prints black but not color. What could be the problem? I bought the printer in 2009, it is Dell V313
Hello Patricia,
First question: you have Windows 7 32 or 64 Bit OS (to find go to control panel, click on system, scroll down to the section of the OS, if its 64-bit it'll tell, otherwise it will be silent on the Bit depth). It is important to know that I can only find a Windows 7 driver for the 32-bit version, not the 64-bit version!
If you have not visited the site of Dell, you will find perhaps instructive: http://search.dell.com/results.aspx?s=gen&c=us&l=en&cs=&k=printer+v313&cat=all&ref=ac .
This article on printing in color was particularly interesting: http://www.dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=bsd&docid=52113 .
Let me know if this helps you.
Kind regards
BearPup
-
REFERENCE DELL 946 PRINTER WILL NOT PRINT
DELL ALL IN ONE PRINTER 946 STOPPED WORKING JUST OUT OF THE BLUE
Hello
· Since when are you facing this problem?
· Remember to make changes to the system?
· You are able to print a test page?
· What happens when you try to print?
· What application you use to print?
As noted by Richard G. Harper, try to print the test page and check if the printer works fine or not.
Method 1:
Maybe it's that the printer drivers have been corrupted. I suggest you to uninstall and reinstall the drivers and see if the problem is resolved.
Note: Uninstall the driver and the software that is installed on the system.
Updated a hardware driver that is not working properly
Find and install printer drivers
http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
Method 2:
I suggest you to uninstall the printer and reinstall the system and check.
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer
Method 3:
I suggest you run the printer Troubleshooter and verify.
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Dell 924 printer will not work with vista Dell 530__
What do I need get the Dell 530 and 924 printer to work together.
Download the drivers for it at the link above.
Read the manual.
http://en.community.Dell.com/support-forums/default.aspx
Ask to above Dell Help Forums.
Contact Dell Support.
See you soon.
Mick Murphy - Microsoft partner
-
Dell 926 printer will copy only /scan, does not print Vista
Failed to get out of the mode copy or scan that he won't print
Uninstall/reinstall the printer.
Link above has 32-bit print drivers Vista for him.
A manual is available for your model of printer at the link above.
http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support
Dell technical support at the link above.
http://en.community.Dell.com/support-forums/default.aspx
Dell's Support Forums are available.
See you soon.
Mick Murphy - Microsoft partner
-
Has made a new installation, now Dell 962 printer will work not (Win7)
So all of the facts are:
I got a virus on my computer of who knows where. Whatever she is, she decided to remove part of my hard drive. So I had a few antivirus and anti-malware programs, and they did too good a job - I damaged my registry.
If I had no other choice, but do a re-install. I didn't do a new installation; This is the option where all he moved to Windows.old. If the computer is good again, except that my printer is not working correctly.
First, I tried the drivers from the Web site. I tried R151565, which should have done the job. This configuration is behaving oddly, however. It is scheduled to end after he installed the All in One Center, and it is supposed to leave me with a printer that works. This isn't.
Then, since it was a re - install, I had to install updates. An update of the driver from dell was one of them. So I thought that this would solve things. The update was successful, but my printer is not installed.
It never happened to me. The printer is not compatible, or it works. This feels like the printer is in limbo. So, I tried to think about what might be wrong. I looked in devices and printers, and there that caveat to sign on my printer. Then I looked in the devices, and I noticed this strange thing
Why do I have two entries for a printer? This must be an allusion to the problem, but I do not know the answer. I imagine that there must be at least one person who has encountered this kind of problems. Please, help me. Research has brought me here many times, but I could not find a solution that matches my problem
Hi KenLJ,
Thanks for writing on the Dell Community Forum.
We recommend doing a clean install of the operating system. Asking you to back up data from the Windows.old folder. Please use this link http://dell.to/1sU6QJ3 to restore your Windows 7 computer to factory settings. If this option does not work, then you can manually reinstall Windows 7 using this link http://dell.to/1mN6P6v. If you want the printer don't work, please uninstall the printer driver. Unplug the printer from the computer. Download the printer driver from this link http://dell.to/1IXOCus and install it. Connect the cable from the printer to the system only when the system prompts you to connect the cable. Continue with the installation, and it would print the test page once it is installed. There are two entries in the Device Manager, one for the scanner and the other is for the printer.
Answer please if you have any other questions.
-
Dell V305w printer not not scanning
I'm trying to scan a picture using my printer V305w, but it does not work. Once I selected a computer to scan to a "downloading application list" message on the dsplay on the printer and the image is not being analyzed. How can I solve this problem?
Rick: Found my CD! OCR program installed
Scanner works fine. Thanks for your reply, John
-
Whenever I try to print a page open in firefox it will not print. The paper feeds through the computer, but don't not pring.
See this:
http://KB.mozillazine.org/Problems_printing_web_pages -
Dell 1320c printer does not print
Original title:
incompatibility between my windows 8 and Dell 1320c printer will not print
My Dell 1320c printer will not print: I use windows 8, it was ok with my windows 7.
Tom O'ConnellHi Tom,
The printer is compatible with Windows 8. You can check this link for the same.
Please answer these questions for an easy understanding of the issue.
- If it works much earlier?
- Do you have an error message when you try to print?
- You are not able to print any file (offline files and offline files), or is the problem specific to specific files?
- What application you use to print?
You can print a test page to check if a printer to print graphics and text correctly. A test page also displays information, such as the printer name, model, and version of the software driver that can help you troubleshoot printer problems.
You can try the steps from the following link and check if that helps.
Reference:
The post with the State of the question and the required information.
-
Printer will not feed the paper card stock
We have an Officejet Pro 8600 who will not feed the paper card stock. It was the printer that I used when I worked and did a great job on standard paper, but it won't take my wife stock card paper craft. We used to have a Deskjet F4400 HP all in one and we were able to print. Any suggestions would be greatly appreciated.
John
John,
Welcome to the Community Forum of HP.
Try indicating what type of media you print to the printer - if your media in the printing preferences settings do not understand "card", you should choose something else which is similar: Matt Brochure, card, 'something' that kind of card stock for the printer to the printer waits 'thick' paper looks.
Printing preferences - Windows and Mac
and... not really related, but may have some relevance:
Print Labels_Business-Cards_Cards
Click on the thumbs-up Kudos to say thank you!
And... Click on accept as Solution when my answer provides a fix or a workaround!
I am happy to provide assistance on behalf of HP. I do not work for HP.
-
Dell 17010N network printer paper feed
The printer will print perfectly as is feeding him makes it halfway on top and stops. It does not crash. the rolls of paper just don't finish pushing. Is this a sensor problem (If Yes, how to test the sensor) or is there something more easy to search?
-
more b210 HP photosmart will not print on dark paper
If I use dark paper the printer will just spit and print on the white back. Is there a setting to allow printing on paper dark?
Yes, there are sensors in the printer 'See' the study to make sure, he was properly chosen and positioned.
For an occasional draw on special paper, you could try affix a strip approximately 1/2 "square cut a note of post-it on the front bottom right (sorry if it's confusing) corner of the paper. (Ok, to reduce confusion, attach post-it to the upper left corner of the green leaf dark, then return to the page face down and feed into the printer face down with the band now top-right forward...)
I don't remember if the B210 automatic paper detection, you can change the media type 'Auto' to 'plain paper '.
-
Paper feeds through the back instead of the round print
I have a HP Photosmart C4780, Windows 7, error message Out of Paper, no changes to the operating system
The printer will feed the paper, but shoot it the back of the printer rather than enter this round and print, I was trying to print on cardstock, when the issue occurred, but continues to to happen when I try to regular printer paper as well. I followed the steps for a printer feed error I found at this link: http://support.hp.com/us-en/document/c02065582#N1040 but it did not help.
Thank you very much for your help!
I suggest you remove the rear panel as shown in the video on this page to troubleshooting, then replace the Panel back and make sure it snaps in place.
Maybe you are looking for
-
Download El Capitan and Yosemite still shows as operating system after reboot
Download of El Capitan, full upgrade but functioning does not appear on the computer
-
Compaq 14-a000: laptop stuck in shut down/boot loop
The main problem I encounter is that I accidentally turned off my computer while he was setting up Windows.Now, as it is, he is stuck in a loop of the ignition, update of the screen showing HP with small points of buffer circling at the bottom, cutti
-
Get 201300 on DAQmx_Read_ChannelsToRead
MAX version 14.5.0f0 DAQmx version 14.2 Hi, I'm stating to resemble the recording feature. I created a task to the MAX with 4 channels on a simulated device USB-6255. Set logging to the log mode and read Then in my C++ code that is fully functional f
-
Want to read the size of a graphics window
I would like to use the size of the graphics window to position the legend next to her, but cannot find the right property. "Bounds - width area" seem to include the entire control (blue arrows in the image below) included the legend, while 'Plot - r